EliteBook 820 G2: Start from USB - does not take into account my choice and starts hard disk anyway!
Hi all!
I just got a new EliteBook 820 G2 and I'm trying to dual boot with Ubuntu. I have it on a USB hard drive that I used to install successfully on a couple other machines (dual-boot a Lenovo T430 and also on a desktop AMD new construction). I cannot go into the options to start with Esc or F9 and the disk appears, but there just ignores it and goes straight to Windows.
I don't have the partitioned external drive, then perhaps that he is not the right one? Seems funny that he would have worked on two other systems, but perhaps a quirk of the HP BIOS? I don't have a simple USB key with sufficient capacity to hold the installer, but do you think I should try to borrow one for that?
For any help or suggestions appreciated!
See you soon,.
Joe.
Hi, Joe:
The only suggestion I can offer would be to go into the BIOS and see if there is a setting to auto USB for USB3 ports.
If it is set to USB3, you cannot start normally port USB3.
USB3 can be the default setting.
The auto adjustment allows the ports work as two USB3 ports when you run windows, and the USB3 drivers are loaded or USB2 ports when not in Windows (for example, when you need to boot from a USB flash drive).
Tags: Notebooks
Similar Questions
-
I am running Ubuntu 14.04 64 bit with Firefox version 38 for Ubuntu
It is complected, and I tried to explain everything clearly.Today, I noticed a strange behavior.
I have several URL saved as .desktop files.I use webupd8.org as example.
The code for the exec in the desktop file is:
Code:Exec=xdg-open http://www.webupd8.org/
Today, I noticed that if I try to go to webupd8.org, or most of the other sites, by launching the .desktop file for this site, or by typing the url
Code:in the dashboard Firefox opens to a completely different site. The site that opens is a site that I set up for my children's grandparents to watch videos and see photos of the children. This Web site opens each time. I'm not be directed to a site at random each time. This is the case when I try to visit the webupd8.org OR one of several websites using .desktop file or enter the url you want in the dashboard. Whenever I went to my own domain.
It happens that I have also several sites registered in a reminder in the Firefox icon in the Launcher sidebar thing in Ubuntu.
In the case of the beast, the exec code is slightly different and it still responds as it should. In this case, I have:
Code:Exec = firefox-new-tab http://www.webupd8.org/
Also, if I change my default in opera browser, for example as .desktop files and entering the url directly in the dashboard work as it should.
To recap:
When Firefox is the default browser, enter a url in the dashboard or use a to surf to a desired site .desktop file causes my be redirected to my own domain name (which is hosted remotely and not on this computer).
If, however, I change the Exec command in the .desktop file
Code:Exec=xdg-open <url>
TO
Code:Exec = firefox-new-tab < url >
the .desktop file will open Firefox and go to the desired site.
If I change the browser by default Firefox to another browser, everything works as it should and has always so far. That is, with the Opera for example, both
Code:Exec=xdg-open <url>
and
Code:Exec = firefox-new-tab < url >
result in the browser by opening and going on the planned site. Typed a url in the dashboard is not a problem if the default browser is not Firefox.
Anyone seen this before? If so, how to solve it?
Thank you very much for your answers!
I checked the url of the home page in Firefox and it has been set at startpage.com, but then when I looked at the default programs in Ubuntu, I noticed that the default program for the web had been unintentionally configured to use a .desktop file that leads to t he admin for my Web site login page.I changed this back to Firefox and the problem was solved.
-
How do I set up my hp6700 printer so that it prints in black and does not take into account all the colors?
To print the black ink only follow the steps below.
1. Select Start menu
2. go into devices and printers.
3. right click on the printer, select printing preferences
4. in the lower right corner, select Advanced
5. and then under features of the printer select print grayscale a dropdown list will appear to black ink only.Let me know how it goes.
-
PS does not take into account the GPU 880 m
Asus g750jz laptop
Windows 7 sp1
Intel latest driver HD4600
latest version of the nvidia driver
last PS
PS is on nvidia gpu in Control Panel
Does not take into account.
Worked on windows 8.1 that I ran out of
That's what you guys.
Find NVidia inspector
Go to personalization profiles
Find the Windows Explorer profile
two options of Optimus game like here
http://PUU.sh/bx8KO/04c5c70c11.PNG
Save
Goto NVidia Control Panel
Find the Windows Explorer
use the Nvidia Gpu on it (its open now)
This forces explorer.exe to render on nvidia
After that PS recognizes NVidia correctly
See you soon!
-
Firefox does not take into account the settings in/etc/hosts Mac Mavericks
Firefox sees only the first entry, defined in/etc/hosts to 127.0.0.1.
Basically, Firefox does not see the changes to the DNS entries, that I made in/etc/hosts. Chrome is. However, later, I noticed that Safari is not to see them. After troubleshooting below, I solved the problem by moving all my/etc/hosts statements to different lines according to them here: http://www.justincarmony.com/blog/2011/07/27/mac-os-x-lion-etc-hosts-bugs-and-dns-resolution/
I have no idea why that works. But it does not resolve the problem for Firefox and Safari.
I have tried a number of things according to this thread: https://support.mozilla.org/en-US/questions/1011327
I tried many things (typing about: config in the address bar):
Set keyword.enabled false
browser.fixup.alternate.enabled set to false
tour of DNS caching.None of these things worked, but did all my config/etc/hosts the migration of multiple domains on a single line to separate lines. Hope this helps someone.
all my config/etc/hosts the migration of multiple domains on a single line to separate the lines did. Hope this helps someone.
-
Windows 7 does not take into account swap file settings
I have Windows 7 Professional 64 bit installed on a system with a mirrored system disk and two disks no mirroring, including a SSD drive which is configured with ReadyBoost. Because mirroring is to the integrity of the data, and has a performance cost associated with it, I don't want any file on my system disk. Instead, I want that page files on non mirrored disks.
So I use computer-> properties and go to the "advanced system settings" to bring up the System Properties dialog box. I click on the "Advanced" tab and in the 'Performance' section, click on 'Settings' to bring up the "Performance Options" dialog box Then I click the "Advanced" tab and in the "Virtual memory" section, click on 'Change' to bring up the dialog box 'virtual memory '. Here, it lists the drive letters and for each drive paging file options.
I put the SSD (:)) has 'Custom size' with ' Initial size (MB): ' as 24576 and ' size maximum (MB): ' as 24576, click on 'Set'. "" "")
I put the other disk not mirrored (b) 'Custom size' with ' Initial size (MB): ' as 24576 and ' size maximum (MB): ' as 24576, click on 'Set'.»»» "
I put the system disk (c :)) "No paging file" and click "Set".) I also tried setting the system drive (c :)) "Minimum allowed" value of 16 MB (size initial and maximum size).)
I get the warnings appropriate, if I didn't put "No paging file" and accept the consequences. If I put the pagefile to 16 MB on the system drive, I don't get a warning of not having a swap file.
I reboot, to let the new settings take effect. When the system is in place, if I put "No paging file" on the system drive, Windows tells me that it has created a pagefile on the system drive, and the file is approximately the same size as the physical memory, i.e. 12 G and the "Performance Options" Advanced tab reports that "the file size for all readers of Total paging" is 12288MB.
If, instead, I put the system drive for the authorized minimum 16 MB paging file, Advanced tab "Performance Options" reports "Total paging file for all readers size" is 16 MB.
In any situation he always respects the settings specified in the dialog virtual memory for other readers.
I checked that 'HKLM\SYSTEM\CurentControlSet\Control\Session Manager\Memory Management\PageFileOnOsVolume' is set to 0, and 'HKLM\SYSTEM\CurentControlSet\Control\Session Manager\Memory Management\TempPageFile' does not exist OR has been set to 0 (Windows always change this parameter to 1 if I chose "No paging file" for the system volume.) So, I change it to 0, reboot and Windows it passes 1 ad creates the 12288 MB pagefile on the system volume).
I disabled BitLocker - it does not start.
I don't really know what hoops I have to pass through to convince Windows to use the swap file configuration that I specify. At the very least, if I put in place minimum swap file on the system drive, to avoid the essential consequences pagination on a mirrored disk performance and to prevent Windows from automatically creating the 12 G pagefile on the system drive, I expect that the other swap files on non mirrored disks will be used by the system , but dialogue "Performance Options" it is clear that single paging file in use is the one on the system volume - exactly what I don't want.
Can you please tell me how to get Windows to my settings?
Hello
Please contact Microsoft Community.We have specific forum for the RAID configuration operating system and they are experts in this field of investigation and would be in a better position to address the concerns. So refer to the link below and post your query on the TechNet Forums.
I hope this helps. If you have any questions on Windows, please answer. We will be happy to help you.
-
Accrual accounting plan does not take into account future absences
Hi all
I came across a scenario where the regulation plan does not consider the future absence when calculating the net benefit.
For example, as of February 28, I have 15 sheets and I request leave from February 15 to February 28 (14 days). After the leave, my available leave balance should be 1 but when I check the accrual accounting starting February 10 (or any date before 15 February) I see my entitlemnt is still 15 and even I can request leave from February 1 to February 15, which I think is not correct. However, when I check the right after February 15 it shows right correct (1 day).
Is this behavior expected from oracle or something wrong?
Thank you
Avinash
Hi Avinash,
It is already discussed and there is a recent patch for the same thing.
Check this thread-
Re: How to use the hours/days entered manually in the field length for BG_ABSENCE_DURATION
See you soon,.
Vignesh
-
Mozilla does not take into account my settings
Mozilla used to restore my previous session after I closed it.
After the last update, it stopped it.
I checked my settings and all its always the same.
(don't forget history in private life and the start of mozilla: ~ open windows of the previous session)But despite this, the settings are how they should be, mozilla is ignorant and it just starts with the mozilla homepage and did not offer to reopen my previous sessions.
It is a problem for me because I followed a lot of forums, and series on the internet and its annoying to open 50 pages, whenever I get and then also know page who I was before I closed mozilla before I could actually continue.
I hope that you (someone) can help me.
Your list of details of the system does not show a user.js file.
Note that there should not be numbered files sessionstore-# .js in the Firefox profile folder, so best is to delete all those numbered files.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the startup window Mode without failure.
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
You can check for problems with preferences.
Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.
-
I have a partition on my drive that is formatted for OS X Journaled, case sensitivity. When I perform a backup, then recovery, all data in this partition is missing. Time Machine does not recognize partitions of case-sensitive? Strange, as the default format for Time Capsule itself is case sensitive.
You cannot use the formatting case-sensitive with OS X. You will need to repartition the drive to Insensitive in full. You can not do any repairs or restore from a backup Time Machine.
-
Does not take into account selection keyboard MCE Vista after recent update?
Hello
I am running localized (CZ) Home Premium SP2 Vista64
(No Answers.cs - CZ groups).I use United States and CZ keyboard layouts, displayed in the taskbar.
Left ALT + SHIFT to switch on.After the recent update of MCE since MS update,
(I think Yes, because he worked in the past)
It does not seem possible to use a Czech keyboard in MCE.
Only United States keyboard layout works in MCE.Any time I switch to MCE window, KBD/selection panel indicator disappears from the taskbar.
If I switch to another application, it reappears again.Or left ALT + SHIFT to KBD switching work in MCE.
Is there a simple solution, that I don't see?
Poutnik
The best depends on how the definition of the best.In article<>
@communitybridge.codeplex.com >, says Barb Bowman [MVP]...OK so basically your question does not imply the update and you can use the
keyboard by default EN with Vista Media Center. (I don't have Vista on anything
more so I can't check myself)Yes, update is not involved in the issue.
But the summary on the keyboard is not entirely correct.If I set default CZ KBD in Vista, I use a CZ only in MCE.
If I put IN KBD default in Vista, I use only IN one in MCE.
Not knowing this, there is no question for me.
But if it was designed in this way, it's strange.Poutnik
The best depends on how the definition of the best. -
Does not take into account the background AE comp SOUL color?
When I visited MP4 of AE by SOUL (it is now forced by Adobe) and then to comps with white background made the MP4 value have BLACK background.
WTF? Someone else?
Did I miss something?
Also make it now all 3 times slower with SOUL (ram preview rendering SOUL = particularly peaceful with sequences of 5 K + slow start SOUL ) it is than I do now always solid as a backdrop to comps?
This is because the MP4 does not support Alpha channels. You have obviously changed the background color of your comp, which may or may not be included in the the background color of your rendering. If you want a specific background color, make a solid, make the color you want and make the layer at the bottom of your model. It's very simple.
When you want to: do you want transparency in your AE render, or do you want a specific background color?
And 5K footage restores slowly, just to let you know.
-
Queue in sql developer does not take into account the VALUE ECHO OFF
I am a developer SQL 3.1.07.42 Windows 7 64 bit with java 1.7
I have the following script very simple just to show the problem:
If I run into a FROG 10.6.0.42 it creates the file withSET ECHO OFF; SET FEEDBACK OFF; SET SERVEROUTPUT ON; SET VERIFY OFF; SET PAGES 0; SET HEAD OFF; SPOOL c:\test.sql SELECT 1, 2, 3 FROM DUAL; SPOOL OFF; /
This is as expected (by me)1 2 3
If I run the same exact query in SQL Developer 3.1.07.42, it creates the file with:
(the < above is actually ">" but software formatting CODE is screwing ' > ')< SELECT 1, 2, 3 FROM DUAL 1 2 3
but I don't want the ECHOed command to be wound. For the life of me, I can't find a way to turn off the ECHO of the queue in sql developer.
Tried the same thing in 3.0.4 and 2.1.1 with the same (bad) result (more a few warning on some unsupported SET commands).
Am I missing something obvious? Cause like that, control of the coil cannot be used in sql developer to generate a CSV file, for example, due to the echo command. And windows does not come with default SED so it's on. (more than my original script is integrated into a whole much broader and complex scripts and the main script, their use is run from Developer SQL as a company policy (so that everyone uses the same tool and the code runs the same for everyone))
Any ideas/suggestions are welcome
Thank you.Hello
If you save your code
SET ECHO OFF; SET FEEDBACK OFF; SET SERVEROUTPUT ON; SET VERIFY OFF; SET PAGES 0; SET HEAD OFF; SPOOL c:\testscript.log SELECT 1, 2, 3 FROM DUAL; SPOOL OFF;
as a script, say C:\testscript.sql, then run from a worksheet like
@\testscript.sql
the output in C:\testscript.log will be
1 2 3
Kind regards
Gary
SQL development team -
Hi all
The Version of database: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
Database version: PL/SQL Release 10.2.0.5.0 - Production
I just realized that the function of the interval is not account of leap years.
I looked through the documentation as much as I can and could find no mention of this.SQL> select to_date('29-02-2008','dd-mm-yyyy') + interval '1' year 2 from dual; select to_date('29-02-2008','dd-mm-yyyy') + interval '1' year * ERROR at line 1: ORA-01839: date not valid for month specified
If I want to add a year to date, I have to calculate the number of days or do something like incrementing only the part of the year and then manually check that it does not fall on February 29 if it is not a leap year manually?
Edit:
just to clarify, day and minute seem to work for example but do not have month and year:
Published by: WhiteHat on July 14, 2011 10:31SQL> select to_date('28-02-2009','dd-mm-yyyy') + interval '1' day 2 from dual; TO_DATE(' --------- 01/MAR/09 1 row selected. Elapsed: 00:00:00.00 SQL> SQL> select to_date('28-02-2009 23:59','dd-mm-yyyy hh24:mi') + interval '1' minute 2 from dual; TO_DATE(' --------- 01/MAR/09 1 row selected. Elapsed: 00:00:00.00 SQL> SQL> select to_date('29-01-2009','dd-mm-yyyy') + interval '1' month 2 from dual; select to_date('29-01-2009','dd-mm-yyyy') + interval '1' month * ERROR at line 1: ORA-01839: date not valid for month specified Elapsed: 00:00:00.00 SQL> SQL> select to_date('29-02-2008','dd-mm-yyyy') + interval '1' year 2 from dual; select to_date('29-02-2008','dd-mm-yyyy') + interval '1' year * ERROR at line 1: ORA-01839: date not valid for month specified
Hello
It is true; in the INTERVAL arithmetic + x (or) d - x, where x is the months or years, the result will be the same day of the month as d. If this date does not exist, then you will get an error
Another example is:SQL> SELECT DATE '2011-03-31' + INTERVAL '1' MONTH FROM dual; SELECT DATE '2011-03-31' + INTERVAL '1' MONTH FROM dual * ERROR at line 1: ORA-01839: date not valid for month specified
To avoid triggering an error, use ADD_MONTHS and/or arithmetic DATE instead.
-
Checkout (registration - Buy) does not take into account billing or delivery address
No matter what I I can not seem to get my order form to capture the billing/shipping address. I tried everything I can think of. If I change the code to capture personal addresses, it works fine. It captures also all custom fields, I created. But the most basic and important shipping/billing are a no go. I use a bcgurus model that had a bunch of extra code in it but I tried to just replace it with a form that just asked for bases and it still does not.
I use the tags right AFAIK: IE; ShippingAddress, BillingAddress etc.
Link to the site of the shop I'm building.
Here is the code:
Post edited by: Liam Dilley - Put code in jsfiddle
It does not appear in the order either. Does not have a Bill, or anywhere else.
-
I've created a form that uses the value field text to fill the text of another field. However, if I need to change the text, the second field does not update this change. Instead of reset the form each time, is the Javascript code to update the fields if they have been modified?
For example I Text1 and Text2.
When I type in Hello in Text1 I see Hello in Text2.
Later, if I decide to change to Goodbye Text1, Text2 remains Hello.
The shape of the hoe can recognize this change?
Thank you
Edit: I think I have misunderstood the situation.
If you want to both fields have the same value, just to give them the same name.
Maybe you are looking for
-
My friend has a newer iMac running ElCapitan. He has an iPhone 6 and wants to create photo collections on his mac and upload them on his iPhone. When he tries the photo library iTunes is grayed out. Suggestions?
-
I don't know what I've done, maybe download a more recent version of firefox, but I over the bar of file/edit/view/history/bookmarks/tools/help on the upper left of the screen. I lost the button refresh button or cancel and the home button. where did
-
I have a bad cd and can not operate.
Is there anyway to get the iso file from a place or a person? I have a cdkey this cd is simply bad.Thanks for any help in advance, Cole
-
Connect the USB cable to transfer files to the Local computer
After connecting the USB microphone from a mobile phone to the computer, I get the following: 1. your device is locked 2. set the Xperia on MTP mode. How do I do that?
-
Does not start. Then starts the message with auto adjustment will then white and computer screen performs two clicks every 5 seconds or so