Enable multiple selection in datagrid spark

Similar Questions

• How to enable multiple selection in a TableView via dragging the mouse

  Hello

  I work multiple selection in my TableView but only via the combination SHIFT + click or by using the keyboard, but how can I enable selection of multiple rows in the table via a drag of the mouse? It doesn't seem to work out of the box.

  Thank you

  Robert

  Take a look at this thread:

  Re: How can I select multiple cells in tableview with javafx only with the mouse?

• Limit of characters in multiple-selection list

  Hi people,

  Throw this out there to see if anyone has had this problem, and how they may have gotten around him.

  It seems that the Multi Select lists have a limit of 1000 characters, i.e. If you select so many items in the list and its over 1000 characters, you cannot save the file.

  I would like to say that ok we will have to just a few lists rather than a big workaround, but the customer fixed the list up in this way, and now that we create the hypersite to allow them to select items in this list, it's possible they could try on the hypersite select all. Clearly, it seems that we will have to have validation on the website to ensure that they do not select more than 1000 characters of a value of items in the list, but it would be useful if there was a way Eloqua to enable this.

  The one you have any ideas/advice?

  Something is very appreciated.

  Thank you

  Andrew Mc.

  I think the challenge is that the multiple-selection list is already built and already used in other functions.

  Andrew - you're right that to resolve this problem, you would have to update the list in Eloqua (again, just the option values, not the option names) and also the list in SFDC - you are on right track here.

  I hope this helps!

• Why multiple selection in parameter throwing error BI publisher 11g?

  Hi all, I have under SQL statement with parameters.

  Select 'TABLE_A '. "" s_number "as"s_number. "

  'TABLE_A '. "" SM "like"sm. "

  'TABLE_A '. "" Loc "as"loc"

  'TABLE_A '. "" Co "as"co. "

  'TABLE_A '. "" s "as"dry. "

  'TABLE_A '. "" m_days "as"m_days. "

  'TABLE_A '. "" b_time "as"b_time. "

  'TABLE_A '. "" e_time "as"e_time. "

  'TABLE_A '. "' build ' as"build. "

  'TABLE_A '. "" RM "as"rm"

  'TABLE_A '. "" aid_credits "as"aid_credits. "

  "TABLE_D. "" Co "as"co_1. "

  "TABLE_D. "" co_des "as"co_des. "

  "TABLE_D. "" pre_co_des "as"pre_co_des. "

  "TABLE_D. "" cont_cou_des "as"cont_cou_des. "

  "TABLE_D. "' end_sm ' as 'end_sm '.

  "St." » « « « dbo ». » TABLE_A' 'TABLE_A '.

  "Left outer join"st. " """dbo"."" TABLE_D""TABLE_D.

  on ('TABLE_A'. "Co"= "TABLE_D". ("" Co ")

  where ('TABLE_A'. ("" in(:PSM) SM "or: PSM is null)

  and ('TABLE_A'. ("' in(:PLOC) Loc" or: PLOP is null)

  and ('TABLE_A'. ("" in(:PCO) Co "or: BCP is null) and"TABLE_D. "" end_sm "="

  order by 'TABLE_A '. "' s_number ' ASC

  I defined in the parameter section

  multiple selection is enabled

  can select all is selected

  NULL value last selected for all parameters: PSM, PLOP, BCP

  now my question is that if I select more than one value in the settings it throws error «an error has occurred on xml data recovery»

  oracle.xdo.XDOException: java.sql.SQLException: type [Hyperion] [SQLServer JDBC Driver] [SQL Server] non Boolean expression specified in a context where a condition is expected, near ', '.

  Please help me what is?

  Kind regards

  Sam

  For this reason, the error is: PSM is null,: PLOP is null and: BCP is null.

  Because it is possible to assign multiple values to a variable to link plain. You must manage this in different ways.

  If she is Oracle DB - decode(:PCO,null,columnxxx,'dummy')

• Model of multiple selection for ComboBox

  Javadoc stats
  
  "As in the ListView, it is possible to change the SelectionModel which is used, although this is likely to be rarely changed. The default SelectionModel used in ComboBox is a SingleSelectionModel, but that can be sorted on by developers to instead allow multiple selection occur, or to change the behavior of the various methods provided in these APIs. "
  
  Yet when I try to set the selection model as I would to a listview using the following
  

  comboBox.getSelectionModel().setSelectionMode(SelectionMode.MULTIPLE);

  I am informed that setSelectionModel is not available.
  
  How to enable you multiple selection in a ComboBox?

  The javadoc you cite above is in fact wrong and comes from an era where the selectionModel property of type «SelectionModel» ComboBox Since then, it has evolved to be "SingleSelectionModel. Which means, of course, you can put some instance of model selection in the ComboBox, but only choice will be always supported. We did it as multiple selection has no real meaning without drastic changes to the UI and UX, and we thought that a separate control could be developed in the future to better support this use case.

  Thanks to notice the incorrect documentation - I'll fix it shortly.

  -Jonathan

• Store multiple selections in list in a single field

  I need help to find this one. I have a simple form that uses a field list with "multiple selection" enabled. The values in the list are North, South, East and West. The user selects 1-4 on these options, and I want to memorize all these values in a single text field in the database called "direction". The ONLY value that is stored is the last value in the list.
  
  Using DW CS3 and mySQL 5.
  
  What Miss me? Thanks in advance.

  "weidemannia" wrote in message
  News:fftbd2$CB4$1@forums. Macromedia.com...
  > Someone out there with a suggestion?

  Add [] to the name of the field, multiple fields will be available as a
  table.

  Joris

• Settlement data based on multiple selection ListBox reference need help

  Hello again,

  The question that I have is selecting from a listbox with multiple selection to fill the tables with the selected data. My code is as follows:

  Void loadData_EventClick (ByRef This)

  Dim j

  Dim k

  k = 0

  If ListBox.MultiSelection.Count = 0 Then Exit Sub

  For j = 1 To ListBox.Items.Count

  If ListBox.MultiSelection (j). Count = True Then

  k = k + 1

  End If

  Next

  TextBox.Text = k

  End Sub

  The code works perfectly up to the second if statement. My current channel group list contains 16 channels and with the second if statement guided the textbox output is equal to 16 (i.e. k = 16), which is what I expected. Im just using the k = k + 1 for the test. Eventually will be replaced by operating code specific to what I need to do.

  So the question that I have is to get the code to recognize what values are selected and referring to the index for the selections in a table. Im not sure on how to do it.

  Any help is very appreciated.

  Thank you

  ~ Nathan

  Attached JPEG shows the current user interface and the output of k with the second if statement commented

  Hey Nathan--

  ListBox.MultiSelection () is a function that returns an array of [multiple] selected items in ListBox.

  ListBox.MultiSelection.Count is a property that returns the number of items in the table above.

  Therefore, the logic in your second IF statement that says if ListBox.MultiSelection (j). Count = True really makes no sense because:

  1. The array returned by the multiple selection (using (j) indexing now refers to a single selected item in the list (which has not its own 'Count' property)
  
  
  2. If you don't the array index, assuming that you had selected 4 items in your list, your statement would still be actually as said if 4 = True which is not what you get.

  Make sense?

  Here is a modified version of your code that I hope makes it a little more obvious how these elements relate to one another.  Give it a run; of course, 75% of the code is extranneous to you working end to account, so make sure that you subsequently delete what you won't need.

  Sub loadData_EventClick (ByRef This) ' creates the event handler
  
    Dim j
  
    If ListBox.MultiSelection.Count = 0 Then Exit Sub
  
    TextBox.Text = "Total ListBox items:" & ListBox.Items.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Total selected items:" & ListBox.MultiSelection.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Selected Items:" & + "\n"
  
    For j = 1 to ListBox.MultiSelection.Count
  
      TextBox.Text is TextBox.Text & ListBox.MultiSelection (j). Text & ", index" & ListBox.MultiSelection (j). Index & + "\n"
  
    Next
  
  End Sub

  You are making great progress; It will get quickly easily faster and we are here to help – do not hesitate.

• Multiple selection in string tree

  I make a tree with line 15, I set the selection to 1 or more. now, I want to make a multiple selection of tree to appear in control of the chain, how can I do this?

  Thank you

  Use the Value property:

  

  The order in "response" will be the order that items have been selected.

• How can I do a multiple selection in Enum control or control of the ring or control Combo box

  How can I do a multiple selection in Enum control or control of the ring or control Combo box

  You can not.

  You can use a listbox control.

  An alternative solution is to write the code and each selection, the user gives an enum, for example, can be send to a table and invite the user to continue to select...

• Problem Manager multiple selection with system dialog box

  I currently have a problem with the help of system on a manager of multiple selection dialog as the code below works fine:

  multiSelectHandler {
                      status: listView1.selectionList().length + qsTr(" Clients Selected") + Retranslate.onLocaleOrLanguageChanged
                      actions: [
                          DeleteActionItem {
                              id: deleteActionItem
                              onTriggered: {
                                  var selectionList = listView1.selectionList();
                                  var selectedItem = dataModel.data(selectionList);
                                  console.log(selectedItem);
  
                                  for (var i = 0; i < selectionList.length; ++ i) {
                                      _sql.deleteClient(dataModel.data(selectionList[i]).clientID)
                                      dataSource.loadData()
                                  }
                              }
                          }
                      ]
                  }
  

  However, when it is changed to use that a dialogue system, the feature does not work and the console record results:

  selected list: undefined

  selected item: undefined

  multiSelectHandler {
                      status: listView1.selectionList().length + qsTr(" Clients Selected") + Retranslate.onLocaleOrLanguageChanged
                      actions: [
                          DeleteActionItem {
                              id: deleteActionItem
                              onTriggered: {
                                  multiSelectDeleteDialog.show()
                              }
                              attachedObjects: [
                                  SystemDialog {
                                      id: multiSelectDeleteDialog
                                      title: qsTr("Delete Clients") + Retranslate.onLocaleOrLanguageChanged
                                      body: qsTr("Are you sure you want to delete these clients?") + Retranslate.onLocaleOrLanguageChanged
                                      onFinished: {
                                          if (result == 3) {
                                              console.log("Cancelled")
                                          } else {
                                              console.log("Deleted")
                                              var selectionList = listView1.selectionList()
                                              console.log("selected list: " + selectionList)
                                              var selectedItem = dataModel.data(selectionList);
                                              console.log("selected item: " + selectedItem);
  
                                              for (var i = 0; i < selectionList.length; ++ i) {
                                                  _sql.deleteClient(dataModel.data(selectionList[i]).clientID)
                                                  dataSource.loadData()
                                              }
                                          }
                                      }
                                  }
                              ]
                          }
                      ]
                  }
  

  With the help of Roger Leblanc, it works now

  multiSelectHandler {
                      status: listView1.selectionList().length + qsTr(" Clients Selected") + Retranslate.onLocaleOrLanguageChanged
                      actions: [
                          DeleteActionItem {
                              property variant selectionList
                              property variant selectedItem
                              id: deleteActionItem
                              onTriggered: {
                                  deleteActionItem.selectionList = listView1.selectionList()
                                  deleteActionItem.selectedItem = dataModel.data(selectionList);
                                  multiSelectDeleteDialog.show()
                              }
                              attachedObjects: [
                                  SystemDialog {
                                      id: multiSelectDeleteDialog
                                      title: qsTr("Delete Clients") + Retranslate.onLocaleOrLanguageChanged
                                      body: qsTr("Are you sure you want to delete these clients?") + Retranslate.onLocaleOrLanguageChanged
                                      onFinished: {
                                          if (result == 3) {
                                              console.log("Cancelled")
                                          } else {
                                              console.log("Deleted")
  
                                              for (var i = 0; i < deleteActionItem.selectionList.length; ++ i) {
                                                  _sql.deleteClient(dataModel.data(deleteActionItem.selectionList[i]).clientID)
                                                  dataSource.loadData()
                                              }
                                          }
                                      }
                                  }
                              ]
                          }
                      ]
                  }
  

• Can't get multiple selections of work ListView

  The example code here seems very simple:

  https://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__multiselecthandler.html

  I use the code example to use with ListView as my model:

              ListView {
                  id: listView
                  objectName: "listView"
                  dataModel: photosModel.photoGridModel
  
                  snapMode: SnapMode.LeadingEdge
  
                  layout: GridListLayout {
                      id: gridListLayout
                      objectName: "gridListLayout"
                  }
  
                  onTriggered: {
                      var newPage = photosPageDefinition.createObject();
                      photosModel.setPage(newPage);
                      navigationPane.push(newPage);
                      navigationPane.peekEnabled = false;
                      photosModel.launchFullscreen(indexPath);
                  }
  
                  multiSelectAction: MultiSelectActionItem {}
  
                  multiSelectHandler {
                      // These actions will be shown during multiple selection, while this
                      // multiSelectHandler is active
                      actions: [
                          ActionItem
                          {
                              title: "Tag"
                              imageSource: "asset:///images/tag.png"
                              onTriggered: {
                                  // TODO
                              }
                          },
                          ActionItem
                          {
                              title: "Share"
                              imageSource: "asset:///images/share.png"
                              onTriggered: {
                                  // TODO
                              }
                          },
                          ActionItem
                          {
                              title: "Move"
                              imageSource: "asset:///images/folder.png"
                              onTriggered: {
                                  // TODO
                              }
                          },
                          DeleteActionItem
                          {
                          }
                      ]
  
                      status: "None selected"
  
                      onActiveChanged: {
                          if (active == true) {
                              console.log("Multiple selection is activated");
                          }
                          else {
                              console.log("Multiple selection is deactivated");
                          }
                      }
  
                      onCanceled: {
                          console.log("Multi selection canceled!");
                      }
                  }
              }
  

  When loading the application, I long press on an item in the GridView control and nothing happens.

  Can you clarify what this means 'does not '?.

  EDIT:

  OK, now I see. To make it work, you must set an empty or nonempty ActionSet for each listitem.

  StandardListItem {
      title: ListItemData.title
      contextActions: [
          ActionSet {
          }
      ]
  }
  

  Now, it will work.

• How to enable multiple audio output on Windows 7? Speaker and headphones play audio different...

  How to enable multiple audio output on Windows 7?  In Vista and XP it did automatically... I'm running Media center and Media player at the same time.  And plugged in a USB headset.  Media Player will automatically play through the headset and Media Center will go to the speakers.

  Why this feature is LEFT?

  Hi jibberz

  Welcome to the Microsoft Answers Forum!

  Unfortunately, several audio output is not a supported feature in Windows 7.  You may, however, check with the manufacturer of material for possible programs for that purpose.

  To work around the problem, try the steps listed in the link below and check: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/b1d1acac-1f21-4d23-8d68-98964d67c2c7

  For any comments, you can see the link: https://connect.microsoft.com/

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need to field multiple select the option without having previously selected deleted

  Hi all

  Request Express 4.1.1.00.23

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  I have a requirement of adding a field of multiple selection to a single screen, and I added the list to multiple selection, without a second thought. Of course, the question is when a user tries to edit a record, click on (with the CTRL key) two options in the selection list multiple, but not clicked on those previously selected, then we lost them. Then I thought to create checkboxes and thus those already selected will be always checked when try to update.

  But I want to do with the multiple selection field. So I was wondering if there is a way?

  Thank you!

  Sam82 wrote:

  Request Express 4.1.1.00.23

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  I have a requirement of adding a field of multiple selection to a single screen, and I added the list to multiple selection, without a second thought. Of course, the question is when a user tries to edit a record, click on (with the CTRL key) two options in the selection list multiple, but not clicked on those previously selected, then we lost them. Then I thought to create checkboxes and thus those already selected will be always checked when try to update.

  But I want to do with the multiple selection field. So I was wondering if there is a way?

  This is the behavior expected multiple-selection list. It can be changed using a point hidden shadow and JavaScript, but there is no way out of the box to achieve what you propose.

  Selections several lists are usually a bad idea:

  • Users do not know how they work
  • They are confused and source of errors, except if all options are visible (which generally wastes space UI)
  • The resulting values of treatment is problematic
  • They are often the cause of a model of incorrect data or result

  Checkboxes or a shuttle are much better options and controls for multiple choice options.

• Add the data in a field of multiple selection?

  Just got got off the phone with the support of Eloqua ask about the possibility of adding data in a field of multiple selection over time. Apparently, it's possible through mailings of form, but no list will be mailed.  Wouldn't be great if during a download list, you had the ability to add data from a field in your file .csv for existing values in this area in Eloqua.  Here's a use case for this scenario... in our society of industry can be part of multiple market segments.  Depending on the event, a person can feel they are part of the market segment 'Radar', but another event specializing in Sonar... they indicate that they are part of the market segment "Sonar", both being true.  There is currently no easy way to enter these data in Eloqua over time as part of the downloads from the list.  Based on the scenario above, the existing value is 'Radar', but if "Sonar" is the value of the field for the next download it replaces the value of 'Radar '.  Ideally, we would be able to capture the two values.

  I said that if there is enough interest in this idea, Eloqua would consider developing a new option for downloads from the list add vs crush.  I hope others can find a use case for this idea.

  Hi Tina,

  I know it's a bit old but I had a simular problem on adding values to a multi select.  Here's how I approached it.

  1. Add a text based contact field Eloqua to transfer your csv values.  Let's call it "MultiSelect download Value" for this example.

  2. Add Eloqua add values to a multiselect contact field.  What we'll call "MultiSelect Final.

  3. create a program that will add the download list.

  4. in the program, create a step to update Contact data

  . in the update rule, update "Definitive MultiSelect' field, Append the value in the field value, value will be hardcoded, check use a delimiter": ", marks the conditional rule the field" value to download MultiSelect "equals the value hard coded or one that you would like the field to be.

  b. create all update settings you need for your data.

  I approached this way because our downloads from the list should be add the data over time.  The field ' value to download MultiSelect ' allows it to be overwritten on each download.

  Let me know if you want more details.

  Thank you

  Blake

• Multiple selection works only not active based on

  Hello

  I tried to create an asset base with a multiple selection, but it strives to 7.6, but not in 11g. Not able to select multiple values from the drop down.

  The default tag is not is also reflected. Here is the code I use.

  < NAME of ASSET = 'Changes' DESCRIPTION = 'Changes' MARKERTEXT = "' * ' PROCESSOR ="5.0"DEFDIR =" / apps/shared/storage/ChangeSet_Test1 ' RENDERUSINGTEMPLATE = 'no' > "

  PROPERTIES of <>

  < PROPERTY NAME = "AssetTypes" DESCRIPTION = "AssetTypes" >

  < STORAGE TYPE = "VARCHAR" LENGTH = "30" / >

  < TYPE INPUTFORM = "SELECT" MULTIPLE= 'YES' SOURCETYPE = "STRING" VALUES = "Left, Right and Center" DEFAULT= "" OPTIONDESCRIPTIONS = "Left, centered, right" / > "

  < SEARCHFORM DESCRIPTION = "AssetTypes updated / created" TYPE = "SELECT" SOURCETYPE = "STRING" VALUES = "Left, Right and Center" OPTIONDESCRIPTIONS = "Left, centered, right" / >

  < / PROPERTY >

  < / PROPERTIES >

  < / ASSETS >

  Concerning

  Bishnu

  Hello BishnuSatpathy,

  This is a known bug prior 11.1.1.8 patch 4.

  For more information, please see note 1587776.1

  I suggest that you upgrade your version to 11.1.1.8 patch 5 to solve this problem, or you can also try the workaround mentioned in the note

  1 - Open the [PATH_TO_SHARED_FOLDER]/elements/OpenMarket/AssetMaker/BuildEditSelect.xml file

  2. remove the dojoType = "the attribute fw.dijit.UISimpleSelect" lines 67 and 115 "

  3 - restart the application.

  4. multiple items can be selected after you make this change.

  BTW, do not forget to add SIZE = "4" in the INPUTFORM, otherwise you get a narrow selection box.

  Concerning

  David