Multiple selection works only not active based on

Similar Questions

• Multiple selection works only not on the list box properties/Option screen

  When I select a multiple selection in the list box properties/Options tab, I get no difference from the default value of single selection. Still, he points out that the last of multiple entries (as a single room) and displays only the last entry. Is there anything else I need to do?

  Thanks for your help.

  To select multiple items, hold the CTRL key when you click additional items.

• ListView - multiple selection works only for StandardListItem

  Hello

  In the meantime, this ListView object are less contraingnant to use; I modified my UI to work as an example of application of Battambang.

  But I have another question

  I use a GridListLayout (such as sample app stamp collector) and my ListItem is a container custom instead of StandardListItem.

  Unfortunately multiselect Manager works only with StandardListItem

  In my case, the context menu is empty!

  RIM is able to provide a sample of collector of stamps with GridListLayout? and multi select Manager / work context menu? and to highlight the points of stamps feature works in multi selection mode?

  Nicolas

  Indeed, the DeleteActionItem is not visible all in Multi Mode. I also tested is not serious if it is set with GridListLayout or not and even deleteAction.enabled of adjustment.

  I have raised a question of public affairs to do this, https://www.blackberry.com/jira/browse/BBTEN-173 so, please vote for it when you get a chance.

  See you soon,.

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Multiple selection box is not showing is not the values passed to grid?

  ColdFusion 8

  I've inherited an application and I try to maintain and improve the it hit... clings today.

  I have a multiple selection box that does not what to expect.  The values come from a ColdFusion grid, which is based on a database query.

  Here is the code for the select - doesn't work - nothing is selected:

  < cfselect name = "USER_IDS" multiple = "true" = "below" selected = queryposition query "USER_IDS' = 'ActiveUsersPlus' disabled = value" "disabled #" = "G_USER_WORK_UNIT_SK" display = "G_USER_ID" > "

  < / cfselect >

  Now if I change the multiple selection of a single select as below - it takes the first element in the list of the fields (from the grill) and selects it in the drop-down menu.

  < cfselect name = "USER_IDS" multiple = "false" queryposition "below" selected = query "USER_IDS' = 'ActiveUsersPlus' disabled = value" "disabled #" = "G_USER_WORK_UNIT_SK" display = "G_USER_ID" > "

  < / cfselect >

  Or if I assign a variable like this and use the code of multiple selection it seems to work as well.

  testlist = '22,26'

  ...

  "< name cfselect ="USER_IDS" multiple ="true" ="under"queryposition selected =" "#testlist # ' = 'ActiveUsersPlus' disabled = value query" disabled # "="G_USER_WORK_UNIT_SK"display ="G_USER_ID">

  < / cfselect >

  I posted "User_IDs" value in the grid and in the part data entry screen to see the values of: 22,26

  to make sure it wasn't my problem.

  Grids and multiselects need something more?  Any advice on how to fix?

  Problem was the bit of javascript for the area of selection.  There is a function for an only select box but not a box selection - this fixed it:

  If (theForm.elements [i] .Guy == "select-multiple") {}

  selectBox var = theForm.elements [i];

  var sbname = selectBox.name;

  CPValue = String (eval ('record.data.)) ((' + sbname));

  var NotifyArray = cpvalue.split(',');

  for (var j = 0; j)< selectbox.length;="" j++)="">

  selectBox [j] .selected = false;

  }

  for (var j = 0; j)< selectbox.length;="" j++)="">

  sbvalue = selectBox [j] .value;

  for (var k = 0; k)< notifyarray.length;="">

  If (sbvalue is {NotifyArray [k])}

  selectBox [j] .selected = true;

  }

  }

  }

  }

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP LaserJet M252dw: Airprint works only not on HP LaserJet M252dw

  We have a HP Color Laserjet M252DW in our business that we intend to use Airprint for printing from our Mac machines, but we cannot make it work.

  We use a Cisco wireless with a 2500 WLC. We have configured mDNS and are able to see other printers, but not the M232DW.

  What we have tried so far:

  > Search for the firmware updated (not available)

  > Reset the printer and reconfigure

  > Use the static and DHCP IP addresses

  > Restart the printer, WLC and Mac devices

  The printer is connected to the same network wireless as users. As I said, Airprint works on other printers, it works just not on this one.

  Any ideas of what I may be missing or what I can try?

  Hello

  I got to work. But only after I reset the default printer and it reconfigured.

  I needed to configure mDNS on Cisco WLC, then after I reset and reconfigure the printer, it took a little time to see the recording on the WLC and for Apple devices pick up (about 5-10 minutes).

  It took that long only for this particular model because the other HP printers have been detected immediately, but those are wired, however.

  To accomplish the same thing for devices Meraki see the following link.

  https://documentation.Meraki.com/Mr/Other_Topics/Configuring_Bonjour_Forwarding_for_the_MR_Access_Points

  Let us know if that helps. Just know you may need to reset your default printer, reconfigure, then wait a while.

  Sachin

• validation of single key works only not with the update

  Hi all

  I use jdeveloper 12 c on windows internet explore.

  I'm at the following link

  http://www.gabrielsideras.com/2010/09/28/ADF-unique-key-validation/

  It works only if I insert new records. After the update, it does not work. He leaves me no update.

  How to work around it please?

  Kind regards.

  User, tell us your exact jdev version, please!

  It works if yo udefine the unique key in the DB?

  Timo

• Satellite A130: Fn key not working only not with Vista - only FlashCards

  Hello

  I've been looking around in the forums, but I couldn't find solutions to my problem.

  I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
  I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.

  The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.

  Is there something else I could do?
  Thank you

  I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.

• Screen Mode shortcut not working only not with the recent update

  Since the update to the latest version of the CC a few days ago, my shortcut to toggle mode screen (F) does not at all. I tried to reset my preferences and I checked my preferences of shortcuts - but nothing seems to fix the problem.

  Any ideas?

  Well, I finally got it working - but not quite how. A combination to reset the preferences, parameters of deleting and re-installing Photoshop. Although I had to reinstall twice before, it made a difference.

  In any case, fixed now fortunately! I appreciate the help.

• British Colombia blog links work only not in mobile view

  The site is http://www/tuckermarcom.com/blog .

  Someone with experience with links not working do not in your blog Business Catalyst, specifically in a mobile view?  I have a responsive model that uses the blog module, but for some unknown reason, the links inline in the blog simply do not work (not type) while in the mobile display (like an iPhone).  The blog titles, link to it is the landing page and system of links work well - it is the I added links that seem to have the question.  Any help would be greatly appreciated!  Thank you

  The hotfix allows the pop up in the General settings of the iPhone.  Minor correction - great results.

• Connection works only not with the PlayBar activated

  I am using the branching feature in Captivate 5.5.  I use the reading bar control to allow users to navigate through the course.  Each slide is configured with a click box to pause the slide, forcing users to click on the next button on the playback bar to scroll through the course.

  The ramification of the feature cannot be used with the automatic navigation (timed navigation)?  I really hope I'm missing something simple just to allow the connection to work properly.  Currently, the logic of branch is completely ignored I click in the course.

  I am using Captivate 5.5; Windows XP SP3; THAT IS TO SAY 8

  Thank you

  Jay

  The ramification is on interactivity. So she requires that the user is interacting with the course somehow and that it not be a variety of responses required under what they do.

  If you are using either the interactive objects (click boxes, buttons, text input boxes) that allow the user to make decisions about what direction to take, or else you have advanced conditional actions implemented which are triggered by events drag enter who choose branching based on certain criteria (for example scenarios (, who glides the user saw, or quiz question scores etc.).

  If you just use the PlayBar buttons, these are going only to the break, play, rewind, move to the next or a slide backward.  These don't really give you options of branches because they just move things in a linear way.  You need to design interactive options that create "fork in the road" in some way.

• Update of iTunes. IPod sync and lost everything but 10 audio books, passed to Touch, four selected works, only on the Touch and not the selected one. Afraid to synchronize other devices that I'll lose everything. ITUNES update BUG

  I updated iTunes 10 Windows a few days ago. I sat to continue listening to an audiobook on my iPod. 110 audio books in sync with the iPod, there are now 10 and not that I want to listen to. I opted for a touch and tried to load the book on that. There are four books selected for the touch. The book I want to not sync and there is only one book on the Touch.  This book is not all the book selected for synchronization.  I am afraid now to sync one of my other devices to iTunes because I'm afraid I might lose even more data.

  Of course, there is a bug in the new update iTunes 12.3.3.17.  Help, please.

  Are audio books in your library? If it is not in your library can see you in your media folder? Your library authorized the Apple ID is used to buy the books? The upgrade of Windows can break the record of the permission on the computer.

  TT2

• went on desktop Windows 7 activation code works only not 10 on desktop

  Have two computers running Office running sp1, 7, and 10. Desktop has been turned off for a while the transition is complete. personal decision to keep 7 all the way, now Office says that my activation is not authentic. in any case I can't find my original 7 activation code.  What happened to her.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• Scrolling touchpad features work only not on Tecra M3

  I mainly used a USB mouse with my M3 lately but went to use the touchpad, the other day and found the scrolling features (i.e. the right and at the bottom of the pad, used to scroll the active window) worked no longer. In the window options of two points, the functions are enabled. I tried altering the functions of the pad, but each time, the new settings have not been applied and next time, I opened the window settings, they were restored to their previous state.

  Any help would be appreciated!

  Colin

  Hello Colin

  I have Tecra M1 and there is the same as on your M3 Touchpad setting. I really don't understand how this can happen. I also use an external USB wireless mouse, but everything works fine. The only thing I noticed is that this feature is possible if the cursor is inside the window where you want to use this feature.