Enable or disable hybrid graphics functio on Bios Dell Vostro 3500
My laptop is a Dell vostro 3500 i5 - 460 m nvidia 310 m hybrid graphics system with BIOS A10 (bi - gpu nvidia/intel)...
In the bios, the system show me only the nvidia 310 as graphics controller (to system information tab)
On the Advanced tab, I have no option to disable this hybrid graphics technology (I have a Media Device Option? what are we doing?).. .but
(http://support.dell.com/support/edocs/systems/Vos3500/en/SM/Bios.htm#Overview) online support documentation, it displays an option to deactivate and activate the hybrid chart that you can see below
With this system hybrid I can only install drivers nvidia dell which is very old site, so I need the newest one of the nvidia site.
On Linux, I can't not all Accelerator 3D even with sources at sky pilots open = \.
My problem is: HOW can I DISABLE THIS GRAPHICS CARD INTEL?
It is a feature of In-processor or an In mother board? Change the processor for one who did not have this chart on board leave my system with only Nvidia 310 for graphics?
Reference Dell have plans save this characteristic show above, back in the next bios?
It is possible (yes/no)? Please, I need this answer
I am with you all.
Dell should give us the option BIOS to decide what we want. The Nvidia hybrid or just graphics.
I mean hey, this is a documented feature.
Tags: Dell Laptop
Similar Questions
-
Vostro 3500 BIOS update failed - need recovery procedure
I got a Vostro 3500 laptop computer work and was doing maintenance to update. I downloaded and installed the BIOS update recommended for this laptop... Dell Vostro 3500 system BIOS 3500 has 12. EXE | Release date of BIOS of Windows/DOS (3 MB) 21/07/2014 updated 21/07/2014 recommended BIOS update failed and left no work of BIOS of the computer. F2 is dead. It will not start. I am sure that there a backup BIOS or primitive still, as when I start the machine without battery and power, using the end key he's constantly trying to read the data from a 2 GB flash drive. I guess he wants to reload the BIOS from a file. I know how to get the ROM content from the file above using the /writeromfile parameter. The big question is, what type of file the 3500 wants to read, and what is the name of the file it is seeking? Is the flash player must be bootable? What is a FRIEND or a Phoenix BIOS? Can someone please? Thanks, Terry
Here's how to recover a flash update BIOS of your laptop Vostro 3500 failure...
1. download the Dell BIOS update .exe file to a USB flash drive.
2. run the .exe with the /writehdrfile parameter file
3. run the .exe with the /writeromfile parameter file
4. copy the .hdr winery50.hdr
5. remove the battery and the power of the dead computer
6 Insert the flash drive into the USB port on the computer of the death
7 press and hold the end key and then connect the AC power
8 dead computer reads USB flash and request if the update should be performed
9. let the update at the end and then restart.
10. computer now works normally.
Useful web site: http://mickitblog.blogspot.com/2011/09/dell-bios-switches.html
-
T500 Hybrid Graphics problem - how to blindly with Intel card
I bought a Lenovo T500 with a faulty ATI card that worked perfectly with disabled switchable graphics. Unfortunately for some stupid reason, I decided to test the ATI card and enabled feature switchable graphics in the BIOS. Now, the laptop starts with a black screen (internal / external) and I can't go to the option to disable the feature of the hybrid. Is there a way to re - put the BiOS settings so that I can use the graphics card intel?
I tried to remove the bios battery, hoping it would issue zero CMOS but this resulted in a series of additional beeps and not much.
Any help will be greatly appreciated.
-
HP Star wars, model: 15-AN000: disable Intel Graphics
Hello
I have HP laptop special edition of star wars which has two Intel HD Graphics 520 and graphics Nividia 940 M.
What I want is that completely disable the graphics card intel and using only nividia graphics card.
First, I checked the bios to no possibility to do so, but found nothing.
I've updated the bios and always this option isn't here!
I want to completely remove chart intel from the Device Manager.
Laptop model: 15-AN000NE
OS: 10 64-bit Windows
Help, please.
Hello
Please try NIVIDIA Control Panel as mentioned on the next post:
Please note: this consumes more battery and the machine may be hot.
Kind regards.
-
4287 dv7 cl disable integrated graphics
Hello
IM, installation of a new whezzy debian in my dv7 4287cl, but im having problems with the graphics card, and I can't use the radeon. Switcheroo does not work for me. So there is a way to disable the integrated graphics card, the bios setup does not allow.
Thank you.
OK, I did it,
I removed the owners and ive installed xorg-server-radeon drivers. vga_switcheroo now works.
-
Enable or disable Hyperthreading
It is my understanding that in previous versions of ESX (v3.0) running on older Intel processors, he was advised to DISABLE hyperthreading in the server BIOS.
We have currently several DL380 G6 servers with processors double hearts (Intel E5530) that will be recycled to host our ESX 4 installation. Is it now considered best practice to ENABLE hyperthreading, since processors in these servers when running ESX 4?
Thank you
Yes even its best performance Vmwares practical now too: -.
http://www.VMware.com/PDF/Perf_Best_Practices_vSphere4.0.PDF
-
Hi all
Is it possible to disable the graphic animation for all graphs.
There is an option in the properties of the graph ""Graphic Animate on screen"which is enabled by default and I would have this option disabled instead.»
Concerning
AdilHi Adil,
This cannot be in the world. To disable the animation, you must disable Adobe Flash on the client computer that affects all other applications running on this machine. There is an open with Oracle enhacement request to fix this,
Bug 12859474 DISABLE "ANIMATE GRAPHIC ON SCREEN" IN THE DASHBOARD LEVEL IS NOT ONLY SINGLE CHARTS
Rgds,
DpKa -
How to enable or disable the phone I followed
How to enable or disable I followed phone
This still applies in iOS 9.
http://www.IMore.com/How-turn-off-iOS-7-location-tracking-increase-privacy
-
enable/disable, enable or disable the tabs
Hello
Im trying to enable or disable certain tabs in a tab based on a toggle switch control.
When I put everything in a while loop and create the control as a false conditional Terminal, then my program works fine and I can toggle tabs on and outside. However, if I include a stop button in an event structure it does not work.
It does not even if I give a default false value coupled with a Boolean OR.
The image is attached.
Any suggestions?
Do not forget that the loop will not go to the next iteration until all the code at the end of execution. This includes the structure of the event. He will sleep waiting for an event to occur. You can add a timeout event. You then plug into blue hourglass on the top left.
But it would be better to add a value for the "Boolean" control change event and place the code in your false case inside this event. Also put the terminal in there with the code. It keeps things organized and allows Boolean values locking action to work.
A little more information bit independent. The function array index is not the constants 0 and 1 connected to it. The default value is 0. Just a tip.
-
Enable or disable the write lock filter remote with a script
Hello
Is it possible to enable or disable the filter of writing EWF remotely with a script?
Sending a command in a batch or the vbs.
Thank you.
In addition to HPDM, you can use the ewfmgr command in a script. For example, ewfmgr c:-disable or ewfmgr c:-activate. You will need describe reboots as well.
-
With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable
Hello all
I am using a modulated signal to labview created pulse width (square wave) to control when a signal is activated or not.
Here is my logic and a concrete example:
(1) the wave source signal is continuous
(2) use a PWM (square wave) created in labview to control when the signal is enabled or disabled
(3) if the PWM (amplitude) signal is superior to 0 play signal PWM is not greater than 0 do not play signal.I use actually this to the sequence step / pulse several distinct magnetic coils using my audio card (which has several channels of audio output), I have a signal in labview played constantly. As to compare it to the PWM (square wave) which controls whether or not the signal is played on each separate channel. That way I can control which coil is on and offshore and in what order they are activated.
I couldn't find an edge detection for a square wave created in labview, so I tried the limits, but it doesn't seem to work unless I change the phase manually and it only goes 1-1. I'm just trying to compare the PWM (edges of the square wave) already created by labview / play a signal if the pulse is greater than 0 and it shuts off the signal, if she is less than 0.
Should I do this another way
TIA
A waveform contains an array of values. You must check every value and respond accordingly:
-
"General COM security issues: how to enable or disable DCOM?
"General COM security issues: how to enable or disable DCOM?
Hello n6neb1,
1. what problems are you having with Dcom?
2. What is the operating system installed on your computer?
You can refer the link that will give you information on this below.
Enable or disable DCOM on Windows 7
How to disable DCOM support in Windows
Thank you
Irfan H, Engineer Support Microsoft Answers. -
How can I see in LabVIEW if an axis is enabled or disabled?
Hello!
I know not how to set the axis in enabled or disabled, but how can I see if the command has been executed when you use LabVIEW?
I use a movement card 7340 PCI with encoder feedback.
Concerning
OLA
Sorry, I noticed just this VI is not compatible with cards 73xx !
Give reading by axis Status.vi to try. According to below extract assistance, I'm not shure if the Motor Off bit will reflect the State enabled axis.
-
The drive - to enable or disable write protection
The drive - to enable or disable write protection?
Hello
You can remove or add protection from writing to your hard drive using the method below:
a. open the start menu and in the search bar type regeditand press to enter. The Registry Editor opens.
Navigate to the following location:
b. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
Note: If the StorageDevicePolicies registry key does not exist, you must create it manually.
c. double-click the key Write Protect in the right window and set the value to 0 for OFF , and value = 1 .
d. data area, and then press OK button
e. restart your computer and test.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows XP
http://support.Microsoft.com/kb/322756/Note: You can view the documentation for the hard drive for the parameters of the write protection.
Hope this information is useful.
-
Question how enable or disable an application such as Adobe Flash Player or a Norton Toolbar?
QuestionHow to enable or disable an application such as Adobe Flash Player or a Norton Toolbar?
Hello
Click the IE 9 gear icon in the upper right of the window and choose "Manage Add-ons." Select the toolbar and Extensions in the left pane, under Add-on Types, and scroll down to the entry for the Adobe flash player and the Norton toolbar. Choose one of these, then click Disable in the lower right.and the next time you start IE, a notice will appear at the bottom of the window to inform you that the particular plug-in is ready for use. Click on the button "do not allow".Thank you.
Maybe you are looking for
-
Satellite L30-101 Vista "access denied."
I get an "Access denied" error when trying to access my own document folders. There are two users put in place on the PC, but we control disabled user account with no password required to access accounts and are both set as administrators. The permis
-
I have a Samsung saga that works under windows. Any chance firefox mobile will work with my device?
-
Equium P200 1IR - update driver display
I have been using my Equium P200 1IR awhile to play world of Warcraft. After an update the game crashes now, the screen becomes black when I'm in an area of the game where there are a lot of things. WoW advised me now, they do not support my driver w
-
SMU 8262 streaming performance with HDD-8264 on an SMU 1062 q chassis
Hello I have a SMU 1062 q chassis, Win XP, running with a 8262 connected to a HD8264 and two SMU 6537 installed, all three pension being on the express slots (3, 4 and 5). The application of benchmark to test the speed of streaming (Win32FileIO) I ge
-
which means a script runtime error and how to stop it happening again?
Almost every page I have put on, games for most sites, an error message asking me if I want to continue running scripts on this page. How can I prevent this happening constantly?