ENQ: TX - conflict in line for the foreign key lock

Similar Questions

• Insert a line containing the same data but repeated for each foreign key availabl

  So I use Jdeveloper11g.
  
  I have a question where I have 2 tables, shops and rooms. Rooms now has a foreign key StoreId, which corresponds to the primary ID of stores and they are connected in a relationship 1 to many. Now I have over 600 stores. And only 2 have all the pieces that were (the building which is not even a main store in most of the rooms). The rest are not, but what I need is to assign to each store with the same name room1 1 room.
  
  So the name would be the same, the primary key could get it I hope some sequences, but the foreign key ID, that StoreID field would have to change and insert for each store.
  
  Is there a way to query sql for this type? Any means which is not manually create a 1 room, then assign to 1 store and repeating the process 600 times?
  
  Thanks in advance

  Hello

  It looks like you want

  INSERT INTO rooms (roomid, roomname, storeid)
  SELECT  roomidseq.NEXTVAL
  ,     'room1'
  ,     storeid
  FROM     stores
  ;
  

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  In the case of a DML (such as INSERT) operation the sample data should show what look like the paintings before the DML, and results will be the content of the or a modified tables after the DML.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

• SQL statement error INSERT The conflicted with the FOREIGN KEY constraint

  I recently installed a reporting for vmware vsphere software, but I get a SQL error. I opened a request for assistance with vmware, but so far they have not come up with a solution. The error is caused by: com.microsoft.sqlserver.jdbc.SQLServerException: instruction INSERT The conflicted with the FOREIGN KEY constraint 'FK_CB_VSM_NETWORK_VC_ID '. The conflict occurred in database 'VCChargebackVCC02', table "dbo." " CB_VSM_SERVER', column 'VC_ID '. I don't know a lot about SQL, so I'm lost in the extent of troubleshooting is concerned. If anyone has any ideas I'd love to hear them.

  SQL questions are better posed on Technet.  They are better equipped to manage the

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Create a line for the new entity using createInstance2 with AttributeList

  
  I use JDeveloper 11.1.2.3.

  I am creating a method in the Module of the Application to create a new entity row in a child table.

  I think I'm to provide the value of the foreign key for the parent table in the AttributeList argument.

  I have search the Forum and carried out a large number of "Googling", but have not been able to find an example where AttributeList is not null.

  Can you point me to an example?

  Thank you

  I created a method in bean managed to add a line through the iterator for the "join table", passing the primary key for each parent table.

  protected void createHistoryForProblem (String or activity, long fkProbrcptReceiptDtl)
  {
  Get the link for the page container
  BindingContainer bindingContainer = this.getBindingContainerByPath("com_gac_apps_receiving_view_requestConformityPaperworkPageDef");
                                                                         
  DCIteratorBinding dcib = (DCIteratorBinding) bindingContainer.get("AllDetailForAProblemForAReceiptIterator");
     
  RowSetIterator rsi = dcib.getRowSetIterator ();

  Insert a new line
  Line newContactRow = rsi.createRow ();

  disable data validation
  newContactRow.setNewRowState (Row.STATUS_INITIALIZED);

  initialize the columns in the row.
  newContactRow.setAttribute ("FkProbrcptReceiptDtl", fkProbrcptReceiptDtl);
     
  newContactRow.setAttribute ("FkProbrcptReceiptActvy", 2);
    
  Insert the new line
  rsi.insertRow (newContactRow);
  rsi.setCurrentRow (newContactRow);
     
  OperationBinding operationBinding = bindingContainer.getOperationBinding ("Commit");

  Object result = operationBinding.execute ();
  If (! operationBinding.getErrors () .isEmpty ())
  {
  StringBuffer sb = new StringBuffer();
       
  List errors = operationBinding.getErrors ();
       
  for (object error: errors)
  {
  SB. Append (error + "/ n");
  }
       
  throw new RuntimeException ("error occurred during the Commission of the data in createHistoryForProblem-" + sb.toString ());
  }
  }

• Optimize the foreign key for the removal of the cascade constraint.

  Hello

  JDeveloper version: 11.1.2.3.0

  I saw this blog and found something new to me: http://snag.gy/qI6dY.jpg

  Jdeveloper user interface, there is an option to select all tables to select the foreign key and set it for the removal of the waterfall.

  My project is deployed on multiple databases. I wonder where this change is registered. None of the project files is modified.

  Can I make this change (from limitations to the waterfall) for each database that I use?

  Here is the blog where I saw that: http://tompeez.wordpress.com/2013/04/22/master-detail-insertdelete-sample/

  I have my object associations optimized for the removal of the waterfall, but without the option above together, I always get constraint violations...

  Concerning

  Not sure however if you set the option the DOF looks like

  	"EMP_JOB_FK' FOREIGN KEY ('JOB_ID') CONSTRAINT
  	REFERENCES 'HR '. "" SELECT JOBS "("JOB_ID') WE DELETE CASCADE

  If you set the option to cascade for fk Job_id from the employees table.

  Timo

• file navigation links to 2 lines for the size of the phone

  Hi everyone, Happy Thursday (or brain dead Thursday for me)!

  I'm working on a new project "sensitive."  As a new project, I am starting with the smallest width and work my way up.

  I have a simple navigation at the top of the page with links to "roll-over" six texts.

  On the smaller size (smart phone - 320px), I need to "Pack" 2-line text links, then a line for each of the large sizes.  I also need to move a chart which is directly below the links down to account for the additional line, and then back up again when the size of the window changes.  For some reason, I can't understand how to do this.  In addition, the navigation will be added to an existing HTML page when finished.

  My question is:

  How can I tell Edge to move the NAV of two lines of text on a single line (and move the chart) when I hit a specific window size (application)?

  I have questions for the media established in the CSS for the HTML part of the page.  Could I simply "show/hide" a div in particular, one with two lines for the nav and the other with a single line using CSS, or is there a better way?

  If it is possible to do so at the idea of div "show/hide", it would be better (or even possible) to make animations of different navigation for each media queries (if necessary)?

  Sorry for my temporary (I hope!) "brain dead" condition :-)

  James

  Hi, James.

  You could go about it like that, but I wanted to point you to EdgeCommons (http://www.edgecommons.org), maintained by Simon Widjaja.  It has a great video that explains how it works:

  DGE-animate-and-the-edge-Commons-Library/ http://TV.adobe.com/watch/Create-Like-Crazy-with-Adobe-Edge/flexible-layouts-using-Adobe-e

  Hope this is useful!

  -Elaine

• How can I get the lines for the date between 2 different days

  Hi all,
  
  How can I get the lines for the date between 2 different days.
  
  Sample data:
  Table name: Articles
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  Title 3 2011-08-21 08-21-2011
  title4 2011-08-28 2011-09-11
  
  Result will be:
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  title4 2011-08-28 2011-09-11
  
  This is my example query:
  SELECT * FROM items WHERE trunc (es.date_start) > = TO_DATE('2011-08-22', 'YYYY-MM-DD') AND trunc (es.date_end) < = TO_DATE ('2011-08-28', 'YYYY-MM-DD')
  
  but I can not get the expected results. Any help would be much appreciated.
  
  Thanks in advance

  not read your question properly before...

  Please try this

  Select * FROM items
  WHERE (TO_DATE ('2011-08-22', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end)) OR
  (TO_DATE ('2011-08-28', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end))

• Identify the missing lines for the hierarchy

  Oracle 10.2.0.1
  Windows XP
  
  create table vill (identification number (5), area varchar2 (20), subarea1 varchar2 (20), subarea2 varchar2 (20), location varchar2 (20));
  Insert in the vill values(1,'AREA1','SUBAREA1','SUBAREA2','AREA1');
  Insert in the vill values(2,'AREA1','SUBAREA1','SUBAREA2','SUBAREA1');
  Insert in the vill values(3,'AREA1','SUBAREA1','SUBAREA2','SUBAREA2');
  Insert in the vill values(4,'AREA1','SUBAREA1','SUBAREA2','VILL1');
  Insert in the vill values(5,'AREA1','SUBAREA1','SUBAREA2','VILL2');
  Insert in the vill values(6,'AREA1','SUBAREA1','SUBAREA2','VILL3');
  Insert in the vill values(7,'AREA1','SUBAREA1','SUBAREA2','VILL4');
  -Before is a perfect set of lines because it has all the lines in the area, subarea1 and subarea2.
  Insert in the vill values(8,'AREA2','SUBAREA1','SUBAREA2','AREA2');
  Insert in the vill values(9,'AREA2','SUBAREA1','SUBAREA2','SUBAREA1');
  Insert in the vill values(10,'AREA2','SUBAREA1','SUBAREA2','VILL5');
  Insert in the vill values(11,'AREA2','SUBAREA1','SUBAREA2','VILL6');
  Insert in the vill values(12,'AREA2','SUBAREA1','SUBAREA2','VILL7');
  Insert in the vill values(13,'AREA2','SUBAREA1','SUBAREA2','VILL8');
  
  Insert in the vill values(14,'AREA3','SUBAREA1','SUBAREA2','AREA3');
  Insert in the vill values(15,'AREA3','SUBAREA1','SUBAREA2','SUBAREA2');
  Insert in the vill values(16,'AREA3','SUBAREA1','SUBAREA2','VILL9');
  Insert in the vill values(17,'AREA3','SUBAREA1','SUBAREA2','VILL10');
  Insert in the vill values(18,'AREA3','SUBAREA1','SUBAREA2','VILL11');
  Insert in the vill values(19,'AREA3','SUBAREA1','SUBAREA2','VILL12');
  
  Insert in the vill values(20,'AREA4','SUBAREA1','SUBAREA2','SUBAREA1');
  Insert in the vill values(21,'AREA4','SUBAREA1','SUBAREA2','SUBAREA2');
  Insert in the vill values(22,'AREA4','SUBAREA1','SUBAREA2','VILL13');
  Insert in the vill values(23,'AREA4','SUBAREA1','SUBAREA2','VILL14');
  Insert in the vill values(24,'AREA4','SUBAREA1','SUBAREA2','VILL15');
  Insert in the vill values(25,'AREA4','SUBAREA1','SUBAREA2','VILL16');
  commit;
  Select * from city;

          ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
           1 AREA1                SUBAREA1             SUBAREA2             AREA1
           2 AREA1                SUBAREA1             SUBAREA2             SUBAREA1
           3 AREA1                SUBAREA1             SUBAREA2             SUBAREA2
           4 AREA1                SUBAREA1             SUBAREA2             VILL1
           5 AREA1                SUBAREA1             SUBAREA2             VILL2
           6 AREA1                SUBAREA1             SUBAREA2             VILL3
           7 AREA1                SUBAREA1             SUBAREA2             VILL4
           8 AREA2                SUBAREA1             SUBAREA2             AREA2
           9 AREA2                SUBAREA1             SUBAREA2             SUBAREA1
          10 AREA2                SUBAREA1             SUBAREA2             VILL5
          11 AREA2                SUBAREA1             SUBAREA2             VILL6
          12 AREA2                SUBAREA1             SUBAREA2             VILL7
          13 AREA2                SUBAREA1             SUBAREA2             VILL8
          14 AREA3                SUBAREA1             SUBAREA2             AREA3
          15 AREA3                SUBAREA1             SUBAREA2             SUBAREA2
          16 AREA3                SUBAREA1             SUBAREA2             VILL9
          17 AREA3                SUBAREA1             SUBAREA2             VILL10
          18 AREA3                SUBAREA1             SUBAREA2             VILL11
          19 AREA3                SUBAREA1             SUBAREA2             VILL12
          20 AREA4                SUBAREA1             SUBAREA2             SUBAREA1
          21 AREA4                SUBAREA1             SUBAREA2             SUBAREA2
          22 AREA4                SUBAREA1             SUBAREA2             VILL13
          23 AREA4                SUBAREA1             SUBAREA2             VILL14
          24 AREA4                SUBAREA1             SUBAREA2             VILL15
          25 AREA4                SUBAREA1             SUBAREA2             VILL16
  
  25 rows selected.

  Power required:

          ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
          26 AREA2                SUBAREA1             SUBAREA2             SUBAREA2
          27 AREA3                SUBAREA1             SUBAREA2             SUBAREA1
          28 AREA4                SUBAREA1             SUBAREA2             AREA4

  Why?
  
  Because as I said above that rowset for the euro1 area is perfect because in the location column there are lines for the euro1, SUBAREA1 and SUBAREA2 area. is exists, whereas if we see that there are no lines for AREA2 with the value SUBAREA2 in the place, even regarding the Domain3, there is no line that has the value of the SUBAREA1 location and even for AREA4, there is no line as location = AREA4. It is a table which is having all the names of place with nested values; for example, we can see that vill7 is exist in zone2 including SUBAREA1 (COLUMN NAME) = "SUBAREA1" AND SUBAREA2 (COLUMN NAME) = "SUBAREA2", but I would like to know location = SUBAREA2 then it will say no line, I want to generate all the lines that is to have no value in the column location for said AREA/SUBAREA1/SUBAREA2 column. Table is sorted by ID. Total column lines are 45800.
  

  SQL> select * from vill where area='AREA1' and location='SUBAREA1';
  
          ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
           2 AREA1                SUBAREA1             SUBAREA2             SUBAREA1

  Ok

  SQL> select * from vill where area='AREA2' and location='SUBAREA1';
  
          ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
           9 AREA2                SUBAREA1             SUBAREA2             SUBAREA1

  It is also ok, but if said

  SQL> select * from vill where area='AREA2' and location='SUBAREA2';
  
  no rows selected 

  < <-Yes, this line I want to generate, because there should be a line whose location = "SBUAREA2" but why? Because otherwise how do I know what is the hierarchy of the SUBAREA2; While vill 5,6,7 and 8 were SUBAREA2 as "SUBAREA2".
  
  I'm not sure how I am clear in my question, please let me know if I need to provide more details.
  
  Thank you.

  user12050217 wrote:
  ... query should return:

  ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
  131 my state             my city              my city              street 2
  

  Sorry, I don't understand that one line. Was it a mistake? I think I understand all the other lines that you want to, but I do not understand why you want the one above. Did you mean

  ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
  131 my state             my city              street 2             street 2
  

  ?

  If this is not the case, why you don't want the row immediately above? Why don't you also:

  `       ID AREA                 SUBAREA1             SUBAREA2             LOCATION
  ---------- -------------------- -------------------- -------------------- --------------------
         131 my state             new city             new city             street 2
  

  ?

  Assuming it was just a mistake, the following Gets the results you want

  WITH     rows_needed     AS
  (
       SELECT     area
       ,     area          AS subarea1
       ,     area          AS subarea2
       ,     area          AS location
       FROM     vill
       WHERE     area           != subarea1
       OR     area          != subarea2
       OR     area          != location
      UNION
       SELECT     area
       ,     subarea1
       ,     subarea1     AS subarea2
       ,     subarea1     AS location
       FROM     vill
       WHERE     subarea1     != subarea2
       OR     subarea1     != location
      UNION
       SELECT     area
       ,     subarea1
       ,     subarea2
       ,     subarea2     AS location
       FROM     vill
  )
  SELECT     (
            SELECT     MAX (id)
            FROM     vill
       ) + ROWNUM          AS id
  ,     area, subarea1, subarea2, location
  FROM     rows_needed
  WHERE     (area, subarea1, subarea2, location)
             NOT IN (
                     SELECT  area, subarea1, subarea2, location
                     FROM    vill
                   )
  ;
  

  except that it is for an indefinite period including the ID will assign to what line. I guess that doesn't matter, as long as 130 to 137 numbers are used (or 131 to 138, if that is what you really want).

  When I run your code on the table he returned me the desired output, but when I run it on my actual table that is having 45800 lines, then he messed up some results, because I think that in your code, I should mention the clause ORDER BY ID somewhere... Therefore, in this example I mention different IDS while inserting the lines. Your code worked very well because it is having only 25 rows with ID Ordered, while my actual table is to have 45800 lines in the table, there is no guarantee of ID ordered... so I think that its a problem with the order by clause, ID... but I don't know where I should put this clause

  What is the significance of id? Is this just a unique key? That's, I guess that each line must have an id and two rows can have the same id, but, aside from that, it doesn't matter what line has which id.
  The query I posted yesterday assumes that subarea1 and subarea2 were functionally dependent on the area. as in the example of data you posted yesterday. I see your last post that's not true, and which explains erroneous results.

  As I said yesterday, if you are actually setting up new lines in the table, you must use a sequence to generate identifiers.

• Please, I have the following question on the foreign key and the ora-00904

  Thanks in advance!
  
  I created the table:
  
  Create the Department table
  (
  DNAME varchar (15) NOT NULL,
  deptID number (5) NOT NULL,
  Primary key (dname, deptid)
  )
  
  then...
  
  Create table Manager
  (
  MgrID number (10) not null,
  Not null, name varchar (10)
  Start_date date not null,
  Primary key (mgrid),
  
  CONSTRAINT fk_department
  FOREIGN KEY (dname, deptip)
  Department of REFERENCES (dname, deptid)
  )
  
  Trying to create the table with the constraint, it yeilds one:
  
  ORA-00904: "DNAME": invalid identifier
  +.. .with an asterisk under "dname" in line: FOREIGN KEY (dname, deptip) +.
  
  I tried joining my name of the column with quotation marks ("" "); capitalized for consistency; and we tried creating and editing then - all to nothing will do. I also tried to use the user interface with Oracle Express Edition and the moment where I click on create, the same error appears. Could someone help please straighten out me up - was this threat for four days.
  
  Thanks again!

  Hello

  Welcome to the forum!

  Columns that will reference the other table must be declared just like all the other columns; including the names in a FOREIGN KEY constraint is not auotmatically define them.
  It works:

  CREATE TABLE Manager
  (       mgrid          NUMBER (10)     NOT NULL,
       Name          VARCHAR (10)     NOT NULL,
       Start_date      DATE          NOT NULL,
       dname          VARCHAR2 (15),               -- New
       deptid          NUMBER (5),               -- New
  PRIMARY KEY (mgrid),
       --
  CONSTRAINT fk_department
  FOREIGN KEY           (dname, deptid)
  REFERENCES department (dname, deptid)
  );
  

  (assuming that the departments table, you posted, there).

  Is there a reason why you use VARCHAR instead of VARCHAR2?

  In the departments table, do you really need both dname and deptid in the primary key? For example, if you have a line with name = "ACCOUNTING" and deptid = 10; is it possible that you could have another line with deptid = 10 and some different dname, say 'REASEARCH '? It is more common to only have a deptid as primary key and have columns in the foreign key constraints that reference.

• How can I make sure that changes in a primary key (in the parent table) would also appear directly in the FOREIGN KEY in the child table?

  Forgive my question. I am very new to Oracle.

  How can I make sure that changes in the key primary supplier_id (concerning the supplier table) would also appear directly in the FOREIGN KEY (supplier_id) in the products table?

  Is that not all the primary key and FOREIGN KEY on?

  My paintings:

  I created 2 tables and connect to apply in the data base referential integrity, as I learned.

  CREATE TABLE - parent provider

  (the numeric (10) of supplier_id not null,)

  supplier_name varchar2 (50) not null,

  Contact_Name varchar2 (50).

  CONSTRAINT supplier_pk PRIMARY KEY (supplier_id)

  );

  CREATE TABLE - child products

  (the numeric (10) of product_id not null,)

  supplier_id numeric (10) not null,

  CONSTRAINT fk_supplier

  FOREIGN KEY (supplier_id)

  REFERENCES beg (supplier_id)

  );

  I inserted the following text:

  INSERT INTO provider

  (supplier_id, supplier_name, contact_name)

  VALUES

  (5000, 'Apple', 'first name');

  I expect that the supplier_id (5000) to the provider of the table also appears in the products table under key supplier_id having the same value which is 5000. But this does not happen.

  How to get there?

  Thanks in advance!

  Hello

  What is a foreign key in Oracle?

  A foreign key is a way to ensure referential integrity in your Oracle database. A foreign key means that the values of a table must appear also in another table.

  Ok!??

  What is now the right way to implement referential integrity in your Oracle database that the values of a table must also be included in another table?

  A foreign key referential integrity indeed enfore in ensuring that the value in the child table must have a corresponding parent key (otherwise you will encounter an error, as evidenced by "SomeoneElse"). However, it will never automatically insert a row in the other table.

  If you are looking for a solution that automatically inserts a record in the other table, maybe you should go for triggers:

  See:

  • http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/triggers.htm#BABCIBBJ
  • Oracle: Help after HAVING INSERT and AFTER UPDATE triggers

• Term plurals changes the name of the foreign key in the relational model

  Hello

  I use a glossary with plurals for entities such as Budget turned to the budgets of the table in the relational model. Unfortunately (for me) it also changes the name of the foreign key. In the related entity, an attribute (for example) is Budget_fiscal year, I expect in the relational model, being the same, but it is transformed into budgets_fiscal_year (budgets in the plural rather than keep him in singular form).

  How can I avoid any change in the attribute names (in the process of engineering in the relational model) but always turn the names of entities from the singular to the plural names for tables?

  Thank you and best regards

  Robert

  Hi Philippe

  Your suggestion 1) works - thank you! budgets_fiscal_year is the attribute of pk exercise in my budget of the entity. It seems a standard behavior of the Data Modeler to compose the UID of the relationship of budgets_fiscal_year (for some reason, this column is not taken the logical model, but the relational model). I would prefer that it be appointed budget_fiscal_year.

  I have not defined any parameter for this (intentionally). But maybe somewhere there by default. Could you tell me where the design parameters in Data Modeler to learn how to configure the definitions mentioned in 2)?

  As I'm always busy with the model of reverse engineering data, I'll wait for DM 4.1.1.888.

  Best regards

  Robert

• Schema import Gets the foreign key number

  Hi all;

  
  

  Scott has a table named rank-> he has primary key-> different tablespace

  Sharma has a table named emp-> he has foreign key-> different tablespace

  $ imp/System Manager queue = refresh_sharma.dmp log = refresh_sharma_imp.log fromuser = touser = sharma sharma

  Import: Free 11.2.0.1.0 - Production Thursday, may 7, 18:35:03-2015

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  Export file created by EXPORT: V11.02.00 direct

  import in US7ASCII and AL16UTF16 NCHAR character set

  import server uses WE8MSWIN1252 (possible character set conversion) character set

  Customer export uses the (possible character set conversion) WE8MSWIN1252 character set

  . import of objects in SHARMA SHARMA

  . . import of partition "CONT_EMP": "P1" 4000 imported lines

  . . import of partition "CONT_EMP": "P2" 5000 imported lines

  . . import of partition 'CONT_EMP': 'P3' 5000 imported lines

  . . "DEPT" table import 12 lines imported

  . . import of table 'EMP' 68278 imported lines

  . . importing table "EMP_AUDIT" 4 imported lines

  . . table 'Method' import 68000 lines imported

  . . importing table "EMP_PERS_INFO" 68278 imported lines

  . . importing table "EMP_PROJ_INFO" 68278 imported lines

  . . table 'LOGTAB' import 603 lines imported

  . . table import "PAYROLL" 186282 imported lines

  . . import of table 'of the PROJECT"22 rows imported

  . . importation of "TAB1" 4000000 imported table rows

  . . table import 'TRANSPORT' 0 rows imported

  IMP-00017: statement failed with error ORACLE 1031:

  'ALTER TABLE 'EMP' ADD 'EMP_EMPLEV_C12_FK' OF CONSTRAINT FOREIGN KEY ("EMP_LEVE" '.

  ""L") REFERS TO"SCOTT" CATEGORY"("GRADE_NAME") ENABLE NOVALIDATE.

  IMP-00003: ORACLE error 1031

  ORA-01031: insufficient privileges

  About to activate the constraints...

  IMP-00017: statement failed with error ORACLE 2430:

  ' ALTER TABLE 'EMP' ENABLE CONSTRAINT "EMP_EMPLEV_C12_FK"

  Import completed successfully with warnings.

  30, 31 line number is display error.

  'ALTER TABLE 'EMP' ADD 'EMP_EMPLEV_C12_FK' OF CONSTRAINT FOREIGN KEY ("EMP_LEVE" '.

  ""L") REFERS TO"SCOTT" CATEGORY"("GRADE_NAME") ENABLE NOVALIDATE.

  After the import operation, to recreate the foreign key is the right option. but

  By performing the import operation, how can all I avoid this error dump file or log file?

  I don't want to use constraints = N.
  

  
  

  Thanks in advance

  
  

  You gave * of * SCOTT * at * SHARMA.  The grant received by SHARMA not getting exported when you export SHARMA.  So, it is not imported when you import SHARMA.  If you did an export and import of SCOTT before SHARMA, the award of the cross-schema would have also been imported.  (Subsidies granted by a user are exported with the user, the subsidies received by a user are not exported with the user).

  Hemant K Collette

• Add the foreign key refers to a different schema

  Hello

  We have a database with schemaA and schemaB and we use a data model for schemaA with SQL Data Modeler.

  Our data model is based on SchemaA and we do not want add schemaB or create subview in our current model for schemaB since our dev team do not want schemaB in the model

  We have created a synonym in tableB schemaB shcemaA after granting select them, references to schemaA

  We have added a foreign key on tableA in referencing TableB on schemaB schemaA.

  for example. Add ALTER table tableA foreign constraint key(column-name) references tableB(colum-name)

  So far so good.

  But if we try to produce the DDL for tableA it has not provided the ALTAR of the foreign key that is based on shcmeaB

  We know that we cannot add foreign key on dblinks.

  How can I get the Modeler DDL from SQL data for tableA, including the foreign key

  We appreciate the answers

  Kind regards

  Zafar

  Hi zak,.

  We have created a synonym in tableB schemaB shcemaA after granting select them, references to schemaA

  We have added a foreign key on tableA in referencing TableB on schemaB schemaA.

  You can do it in the database because TableB exists in the database and DB knows its definition, including the existing constraint of PK/UK.

  This is the same model of data Modeler - you must have the definition of the table referenced in order to create the FK that refer to the constraint of PK/UK.

  As it works now (we can change it) you can have modeled for SchemaA and ModelB for SchemaB. Then, you can drag & drop tableB form the Navigator to the diagram of the ModelA and TableB there will exist as an object remote read-only, you can use to create the FK.

  With the help of subviews, DDL generation and configurations of reports, you can display the dev team than objects that they want to see - on the charts in generated DDL and reports.

  Philippe

• Rename the foreign key constraint

  Hello
  
  I have table tbl_a with a column a_col1 SEO tbl_b.b_col1
  
  I want to create the name of the foreign key as FK_A_COL1 constraint which is FK_ < COLUMN NAME OF the CHILD >.
  
  Foreign naming key standards does not have the use of the name of the child under the name column.
  
  Is there any other solution/script to achieve this?
  
  Thank you.

  fkeys = model.getFKIndexAssociationSet().toArray();
  for (var i = 0; i;//also can use fk.getTable().getAbbreviation()fkname = "FK_"+fk.getTable().getName();cols = fk.getColumns();for( var k = 0;k
  

• Identify the foreign key table

  I have a table that has a few constraints that are foreign keys to other tables (see column FK_ETHNIC below). My naming conventions are consistent so they all start with 'FK_ ". In SQL, how can I find the table that the foreign key column references? I have a process that must find this table and then get all of its columns.
  Thank you!
  
  CREATE TABLE STU_BASE
  (PK_ID VARCHAR2 (32), sys_guid() by default)
  CONSTRAINT pk_stu_base
  KEY ELEMENTARY SCHOOL
  With the HELP of INDEX TABLESPACE sis_express_index
  STORAGE (INITIAL 524288
  NEXT 524288
  PCTINCREASE 0),.
  STUDENT_ID VARCHAR2 (15).
  Fk_stu_base_ethnic FK_ETHNIC VARCHAR2 (32) CONSTRAINT
  REFERENCES
  Ethnic (PK_ID)
  REMOVE THE NULL VALUE;
  
  CREATE TABLE ETHNIC
  (PK_ID VARCHAR2 (32), sys_guid() by default)
  CONSTRAINT pk_ethnic
  KEY ELEMENTARY SCHOOL
  With the HELP of INDEX TABLESPACE sis_express_index
  STORAGE (4096 INITIAL
  NEXT 4096
  PCTINCREASE 0),.
  VARCHAR2 (2) ETHNIC,.
  ETHNIC_DESC VARCHAR2 (30),
  STATE_CODE VARCHAR2 (2),
  FEDERAL_CODE VARCHAR2 (2))

  You could do a self-join with CONSTRAINTS (USER, ALL, s/n) views. You can search a constrainttype of 'R' and you can attach it to itself based on the R_OWNER and R_CONSTRAINT_NAME columns.

  For example:

  SELECT r1.owner      AS child_owner
       , r1.table_name AS child_table
       , r2.owner      AS parent_owner
       , r2.table_name AS parent_table
  FROM   all_constraints r1
  JOIN   all_constraints r2 ON  r2.owner           = r1.r_owner
                            AND r2.constraint_name = r1.r_constraint_name
  WHERE  r1.constraint_type = 'R'
  ;
  

  Published by: Centinul on February 16, 2012 15:36