Environment variables in the terminal

Similar Questions

• Setting up the Environment Variables for the unit

  Hello

  I'm trying the license of the unit on an internet connection that requires a proxy. The unit for some reason any he manages really evil and tries to communicate without using the proxy server. I've been looking around and can't seem to find a clear answer on how to do it. Unity forums suggest to use Environment Variables, but only to give me a method (the ~ /.) MacOSX/environment.plist method) for (what they claim is Yosemite) but seems to be the Lion of the mountains or earlier as far as I can tell.

  What I have to use Environment Variables or is there another way to do it?

  It must also be that variables apply globally to all users on the computer not only la I would be connected at this time.

  Concerning

  Running Mac OS 10.10.5

  aunchd-conf-no-longer-works-in-os-x-yosemite https://StackOverflow.com/questions/25385934/setting-environment-variables-via-l

  http://lajosd.blogspot.be/2015/06/place-following-content-enhance-it-to.html

• With the help of 'Real' Environment Variables in the Forms60_Path registry entry (Windows)

  Can someone please confirm or deny that it is possible to define the entrance of registry Forms60_Path Windows to use values such as % MyFormsDir%\FMX;%MyFormsDir%\PLL, rather than 'values hard-coded' as E:\Forms\FMX; E:\Forms\PLL?'

  I can't find any documentation or messages on this topic and although I can't really make it work - it seems "half work" in a compelling way, and I don't want to give up without exhausting all the possibilities. Any informative info welcome. Thank you.

  This could be possible. Even if this is the case, where you would set MyFormsDir? Exactly, in the registry

  You don't have to use the registry at all actually. What we usually do is create a bat file that defines all forms variables and call the file beats to launch forms.

  Set MyFormsDir = E:\Forms

  Set forms60_path=%MyFormsDir%\FMX;%MyFormsDir%\PLL

  ... Put all the other variables from forms and reports you need here...

  Start C:\OraDev6i\bin\ifrun60.exe Module = MyStartForm.fmx Window_State = maximize

• Using an environment variable in a shortcut on the desktop

  I would like to create a shortcut on the desktop that uses part of the environment variable in the "Target" text box  I need to do this because the location of the program may vary from one site to the other.  I would like to be able to type the following:

  (\BestPractices\BP.mdb Y:\[MID(%HomeShare%,29,7)]

  HomeShare is an environment variable.  But the name of the folder is the 7 characters starting at position 29.  I would like to avoid having to do this in a batch file or other external utility.

  Thank you

  Well, no, it won't work.  Why not set up the database using the Runtime to create its own folder? --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• Create the directory objects with the path environment variable

  I need to create a directory object and wonder if it's valid to use an environment variable in the nom_chemin?  Example:

  CREATE or REPLACE DIRECTORY XMLDIR AS ' $ORACLE_HOME/rdbms/xml ";

  I read the following in the Oracle 11.2 documentation, but it is is not clear to me if an environment variable is allowed or not.  My reason for wanting to use a variable of environment as opposed to hard coding is for when I update, I have no back reference to the old House of Oracle.

  nom_chemin

  Specify the name of the full path of the directory on the server where the operating system files are located. Single quotes are required, so that the path name is case-sensitive.

  > I see that many developers have created objects to directory with the environment variables in the path.

  Please post reproducible test

  You know & realize that the Oracle database is independent of the operating system (OS)?

  Environment variable is OS specific.

• Where can I find a list of all environment variables that can be used in the getenv() function?

  Hello

  I tried to find a list of all the environment variables to the OM of InDesign, alas, without success. I have already stumbled on what follows.

  $.getenv ('computername');

  $.getenv ('username');

  Even in the wonderful Jongware of object model (Adobe InDesign CS5 (7,0) object model JS: Table of contents) there is no information on that.

  I am looking for reference library containing these values. I have no specific in mind script task.

  Any help much appreciated!

  Olli

  You answer me here. In the good old Wikipedia there is a page on this. Check it out:

  Environment variable - Wikipedia, the free encyclopedia

• Sourcing of the environment variables in windows NT

  Hi friends,
  
  I only have a knowledge in EBS 11i and R12 on linux, I have not tried to install it on windows yet. Windows EBS 11i still is
  available for download at edelivery.com?
  
  In addition, we have a customer who is equipped with Oracle Applications 11.0.3 on windows NT.
  How do I source (under windows NT) environment variables so that I can find where the APPL_TOP directory?
  
  On linux, I do the sourcing environment by logging into ussue and user applmgr command of ff:
  . $ORACLE_HOME/APPSORA.env
  
  What is the homologous command in windows NT?
  
  
  Thank you very much

  In the APPL_TOP directory, there should be an envshell.cmd. By clicking on this set of files gived invite you with all your environment variables for the application environment. You can place a shortcut on the desktop if you want.

• Z400 idea system environment Variable

  Hello guys!

  I messed up just the value of the path variable and the laptop is much slower.

  Can someone paste here the value of the default Variable in the variable "Path"?

  If you want to help, but do not know how to follow this:

  Go to the research and the variable type.

  Click configuration, and then you will see 2 icons.
  Click Edit system environment variables.
  The bottom of the pop-up window there is a button called Environment Variables.

  See you a large number of variables, search for the path, click on edit and copy the 'Value of the Variable' field and paste it here!

  Thanks in advance!

  Just used a restored...

  Difficulty if someone needs it.

• What shared variable caused the event?

  Hello

  I save the shared variables to trigger the event (see attached photo). How is it possible to detect which shared variable triggered the event, but not analysis of chain of the shared Variable in the terminal dynamic event of the structure of the event?

  Thank you.

  Hello Martin,

  Looks like you have access to the shared variable that raises the event, take a look at the photo in the following link:

  https://decibel.NI.com/content/docs/doc-4375

  Michel

• Error message: PRVF-3929 - PATH environment variable.

  Hello
  
  I'm trying to install Oracle on my laptop and get the following error message resulting in installation hault.
  
  INFO: *********************************************
  NEWS: Environment Variable: 'PATH': this test checks if the length of the 'PATH' environment variable does not exceed the recommended time.
  INFO: Severity: CRITICAL
  INFO: OverallStatus:VERIFICATION_FAILED
  INFO: -----------------------------------------------
  INFO: Results of the audit for node: JF - PC
  NEWS: Expected value: 1023
  NEWS: Real value: 1159
  INFO: Error Message: PRVF-3929: adding location of Oracle binary in the PATH environment variable exceeds the length limit of the BONES of "1023" for the variable on node "JF - PC."
  INFO: Cause: the installer must update the environment variable PATH to include the value of '% ORACLE_HOME%/bin';.
  However, this will cause a path exceeds the maximum allowed length that allows the operating system.
  INFO: Action: make sure that the sum of the length of your current PATH environment variable and one of
  "% ORACLE_HOME%/bin;" does not exceed the limit of the operating system.
  Restart Setup after correcting the value of environment variable.
  
  
  Installation of the ton tent of the Oracle database - win64_11gR2
  
  MY PC CONFIGURATION:
  -Windows 7
  -64-bit
  
  Can you please help me get this resolved please.

  The following information appears to be linked: http://support.microsoft.com/kb/830473

  According to the link above, the maximum length of the PATH environment variable is 2048/8192 characters. Apparently the length has been increased to 2048 from Windows XP SP2. Your current path is about 1200 characters that is less than the limit of the OS.

  The Oracle installer is incorrect about the PRVF-3929 error message? Or if the length of the path environment variable is not the real problem? Maybe you can try temporarily shorten the path and add the full pathname after the installation of Oracle.

  You should be able to modify the path as follows:
  From the desktop, do a right click my computer, and then click Properties.
  In the System Properties window, click the Advanced tab.
  In the Advanced section, click the Environment Variables button.

  Using Windows 7 Professional? If the error message occurs even with a short path, then maybe there something else trigger this error, as the antivirus or other security software.

  Published by: Dude on July 3, 2011 11:15

• R12 Custom environment variable

  ... I'm quite familiar with the autoconfig 11i customizations, but R12 looks different...
  I'm trying to follow notes 415967.1 and I need a set of variables IX_PRINTING environment. (NOT a top custom.)
  + In 11i, I defined a custom context variable and updated the $AD_TOP/admin/template/custom/APPLSYS_ux.env file to export the IX_PRINTING environment variable using the context variable value. Unlike my 11i, R12 environment installed doesn't have a $AD_TOP/admin/template/custom/APPLSYS_ux.env file. I tried to create this file with just the 1 set the variable, but subsequently autoconfig, all other variable R12 environment do not set!
  
  By using the notes referred to AutoConfig and customization AutoConfig, I must be missing something...
  + By OAM, manage custom settings section, it seems to be a way to define a custom context variable that becomes an environment exported variable. Perhaps "OA_TYPE" could drive this?
  + I don't want to really "fake it", calling it a "custom-made product supplement", but I could.
  
  Good thoughts/suggestions?

  Hello

  + In 11i, I defined a custom context variable and updated the $AD_TOP/admin/template/custom/APPLSYS_ux.env file to export the IX_PRINTING environment variable using the context variable value. Unlike my 11i, R12 environment installed doesn't have a $AD_TOP/admin/template/custom/APPLSYS_ux.env file. I tried to create this file with just the 1 set the variable, but subsequently autoconfig, all other variable R12 environment do not set!

  This must be OK you must create the custom manually directory and copy the file - see (Note: 430020.1) for a similar description.

  By using the notes referred to AutoConfig and customization AutoConfig, I must be missing something...
  + By OAM, manage custom settings section, it seems to be a way to define a custom context variable that becomes an environment exported variable. Perhaps "OA_TYPE" could drive this?
  + I don't want to really "fake it", calling it a "custom-made product supplement", but I could.

  What happens if you set this environment variable in the user applmgr profile?

  Kind regards
  Hussein

• How to get the active directory and environment variables

  Hello

  1 - is there a global variable to get the real (project, where is ORD and DSQ files) directory?

  2.-y there a way to get the directory of the user as the reading of the operating system environment variables?

  Thanks in advance.

  PD: I use Dasylab12

  Yes, use ropes of system

  For example, ${DATA_FOLDER}.

  For a list, the simplest method is to right click and select global chains. The lower half of the dialog box lists the system strings, including the date, time, name of the worksheet, with or without a path, the DEFAULT folders for the spreadsheet, data, other, black box, etc.

  

• "Call the executable" allows the environment variable "path"?

  Hello

  It seems that when you use the step type "call the executable" you need to enter the absolute path of the executable, or the absolute working directory, in the definition of "call settings" step.  I seem not to be able to put in a *.exe by himself in the path and have the command is found, even if I can't enter this same command on the command line (windows 7).  Is it possible to configure this step to use the windows ' path' environment variable to search for the executable?

  David J.

  You can do the following:

  (1) specify cmd.exe for the file path.

  (2) specify "/c yourexe.exe" for the argument expression

  This will launch a command window and tell it to run your application with the simple file name.

  The reason why you can't put just yourexe.exe in the path of file is that TestStand made its own resolution of file path that is different from what the window command. It uses its directories to search to resolve relative paths. If you do not have to specify an absolute path for the file path parameter, but it must be compared to a TestStand search directory or the current sequence file.

  Hope this helps,

  -Doug

• How to programmatically change the environment variables

  I use Visual Source Safe commands in the context menu of Windows Explorer, and I often have to change VSS to the other database. I uses .reg files to change the value of the variable SSDIR. The registry editor displays the new value immediately after the call to the .reg file. However, the system does not seem to actually recognize the change, unless I open my computer properties to Environment Variables, and then click OK.

  How can I make an immediate change to a variable user permanently without enter in the properties of my computer?

  Ken Frantz
  New York State Office of Mental Health
  Business Intelligence Office
  E-mail address is removed from the privacy *.
  518-474-3079.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience of developers on MSDN. Please ask your question in the Forum of SourceSafe and Visual Studio Source code control. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/vssourcecontrol/threads

• How the PATH environment variable longer?

  Hello

  I use Windows Vista Business.  Lately, I just installed the beta of Intel Parallel Studio and found that my path variable ran out of space.  Internet research concluded that there cannot be more than 1024?
  It is too little for me to welcome all directories program that I installed, and thus some programs no longer work correctly.
  I wonder if there-
  (a) is a way I can expand the size of the Path system variable?
  (b) add another variable which can take some Path variable values so that I do not violate the limitation of 1024.
  Thanks in advance!
  A

  Hello, Gutsingh

  The PATH environment variable has a fixed limit of 1023 characters can be used. It doesn't seem to be a way to extend this. Other environment variables have a higher limit, which can be useful.

  Let us know if that helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.