Equium A60 - 155 Power Supply Problem

Similar Questions

• Equium A60-155 display driver problem

  I have a problem with my laptop when I have a USB hard dive or a CD/DVD, my display driver crashes

  The display driver is the latest version (ati mobility radeon 7000 igp - 6.14.10.6430

  all ideas

  Hello

  Well, it's not easy to tell why you laptop got this dysfunction. As a first step, you can try to update the BIOS.
  As far as I know the latest version is 1.9

  Good bye

• Equium A60-155 will not start

  Hello

  I have an Equium a60-155, that I knew that she works for a while, but recently I came with a new poroblem... my laptop guard turn off without notice and loses all power.

  The battery has been dead for some time and lasts about 5 seconds, but I've been using the AC adapter.

  Recently, she stops and even the LED lights for the power/battery adapter / is not on.

  At first I thought it was the fuse in the adapter which could have been blown so I replaced it, and it started to work again, but then after a few minutes, it stops and lost all power.

  I had this during the last days and I noticed that it regains power when I unplug the power adapter from the mains supply and remove the fuse and put it back in but his lasts only for a few minutes.

  I don't know if it is a hardware problem or I just need a new adapter. Someone at - it similar problems and can offer any adivce?

  Hello!

  What do you think that the laptop is overheating? I don't know, but if so the laptop would also immediately turn off m.
  So, try to clean the laptop with a jet of compressed air to blow the dust from the cooling fans. So you don't have to disassemble the laptop.

  If it doesn't help it's really hard to say what the reason is for this maybe you should bring the laptop to an authorized service provider. Technicians can check the laptop.

  Good bye

• Equium A60 - 155 clicks when I try to turn it on

  Hey

  I was wondering if any1 could help me. I recently put a toshiba equium a60-155 without a power adapter, also without battery but the store are previding by toshiba as soon as possible. so I put a power adapter and plugged - DC IN light turns green so everything seems good but then when I try to turn it on just click and the keyboard lights flash, then nothing happens - if I hold down the power button everything that just clicks and flashes. is it because I dnt for a battery? -I don't think dnt. any other ideas?

  see you soon

  Josh

  Hi Josh,.

  Your A60 equipped with a pre-installed system or you have set up your system CD provided?

  Your laptop must turn on without the battery, so it is possible that there is no operating system installed for the time being installed.

  Have you had the correct PSU for your A60? Your card must be able to supply sufficient power for the laptop or that it does not start.

  HTH

• Equium A60-155: energy saver ends at the beginning upward

  I had a lot of problems with breaking that I did a new install, but when I put all the drivers and stuff on the eve software power puts an end to started and I can not install hotkey-dd-xp-10008sa-en. It says drivers not found.
  I used a Xp slipstreamed sp2 installation disc got the updates that I needed Microsoft.

  Can the poster me an iso of the original installation disk for Equium A60 - 155 that I've not had one, or we shed some light on the problem

  Hello

  I guess you can not install the Toshiba Power Saver because you use an order of bad installation.
  All important information about the installation of the driver s you will find on the page of Toshiba diver.

  In addition, if you have installed the SP2 of Microsoft so you should check fact sheet Microsoft Windows XP SP2 update on the necessary and important Toshiba updates.

  Good bye

• Overheating on Equium A60-155

  Hi all

  I've owned an equium a60-155 for almost a year now, it has been discovered, but recently it began to close, which I suppose is overheating.

  the vents are clear and unblocked, although the area around the Equium logo (top right of the base unit) feels very warm after a closed random

  I use the machine for work and play and sometimes watching DVDs

  for about 2 weeks, ao that the machine started randomly turning its self, without warning, the machine sits on a table and the underside and rear passages are clear

  There is no virus/spy/software advertising on my machine and all programs are updated

  Anyone know of a cause or a solution to my problem?

  Thanks in advance

  Jake Houghton

  Hello

  Well, if there are cooling vents are free and not dirty, so I guess that the cooling fans are working properly. In this case, what you can do is to check the settings for standby power.
  Try changing the method of control of the CPU to Auto. Also, check if the cooling method is set for maximum performance.

• Equium A60-155, don't 'sees' new HARD drive

  I have an old Equium A60-155, P5A67E and tried to install a new drive hard - one Samsung 120 GB, 5400 RPM IDE.
  However the BIOS (ver 1.90) is not 'see' and has no auto-detection option I see either - in fact it has very few options for anyone!

  The existing drive (original) is a Fujitsu 40 GB IDE.

  The 120 GB should be not OK, below the barrier of 128 Gb? - but would be using a suitable HARD drive utility (-Samsung offers a version of OnTrack) to make the drive HARD smaller 'look' for the Bios, be any help anyway? Is that the new drive faulty? Any other ideas?

  Any help is appreciated!

  I agree with you and think that 120 GB should be recognized correctly. It is not easy to say what the problem is here. BIOPS value default settings and check again. If the same problem persists, try using a different HDD with 80 or 100 GB to see if any of them will be recognized correctly.

  Problem is that you have limited options with all this and that he cannot do much. Either it is admitted or not.

• Blue screen on Equium A60-155 - "Driver IRQ not less or equal" stop 0 x 0

  I have a model Equium A60-155 no psa67e-00300c8j and I got two years ago. She has always had a problem of crash with "IRQ_Not_less_or_equal. I did all the memory reinstall new habit, and updated the BIOS etc.

  In desperation, erased from the hard drive with a windows 2000 and reinstalled the recovery disk and it worked for about a month. When I updated the Explorer and Norton it crashed again. (updates are always a precursor) The laptop and an Explorer to work properly in safe mode. I removed all Norton a PROG from Symantec, but it remains the creases, but it's now a constant error. "Driver_IRQ_not_less_or_equal" with tech info * stop 0 x 00000004, 0x00000002, 0x00000000, 0x00000D1, 0XF7A6A6C6.

  This is almost certainly a driver of windows operating system problem, it happens with any XP disk.
  Help, please!

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22531

• Error when updating the Bios Equium A60-155

  Hello.

  Here, I have TOSHIBA Equium A60-155 MODEL No.: PSA67E - 00300C8J

  "I tried to update the bios, follow this thread" [http://laptopforums.toshiba.com/t5/Drivers-and-Utilities/Equium-A60-BIOS-Update-Problem/td-p/99434] ".

  but I got the error, as in the screen:
  [Photo: http://qgwbrw.bay.livefilestore.com/y1pZJ7VOj2nrffkqrqlCXuwOHdILOPKPqWuCT0i3MoAuv6p5QR k1WSwQm3APFZIodBVIdL807fC_a_RAYR79W1XqWSpSh5x9cVw/13072010395.jpg? psid = 1]

  Hello

  Looks like you want to update the Bios back-base. You can download windows-based BIOS:

  http://img830.imageshack.us/img830/7228/78420804.jpg

  Note, updating of the Bios, close all running programs running, including antivirus, disconnect from the Internet. However, if the system works well. should not touch.

• Cannot install XP OS on my Equium A60-155

  Hello guys,.

  I had a laptop series Equium A60-155 about 3 years old worked when I used last and it was about 2-3 months ago. I turn on the laptop yesterday into the to use and she charged up to the logo then no activity on the display showed after that.

  I formatted the laptop with Windows XP Home edition disc and then tried to install Windows XP Home edition, but it keeps stopping at 53% in the installation process.

  I went to a technician, and his suggestions were:
  -Possible overheating,
  -Damaged, hard drive
  -Configuration of the bios,
  -Damaged the motherboard or,
  -damaged band memory.

  I tried again this morning, but even once, he stopped at the same percentage as yesterday 53%. If you have any suggestions that require the problem please post your here on this post.

  Thanks to those who responded.

  Hello

  I also suspect that the HARD drive is faulty. If possible, try to get the second HARD drive for testing. It doesn't have to be a new brand. Test it and post the results.

  We can just speculate on possible problem, but I agree with technician. Take the first step and test the HARD drive.

  O Yes, you can also clean the laptop before starting the procedure of facilities. After only that the laptop will be cooled much better.

• Motherborad Exchange on Equium A60-155

  Hello

  can anyone help please. I have an Equium A60-155 dead (PSA67E-00300C8J).
  This laptop I had since and is awesome, I recently spilled and that pushed the power in unity cable adapter, initially when running back (as it was off when he went) it worked, I noticed that the adapter has been pressed and waved it I heard it I think has a little spark and now the laptop tries to fire for a few seconds and turns off now I think the motherboard is dead and I am able to buy a motherboard to another model satellite A60-152 PSA67E-00200D8J, but can't find any information about this model.

  Someone know if I can put my p4 2.8 in this forum and use it or have a plug on this forum?
  If anyone can help I would be very grateful.
  Thank you very much
  Colin

  Hi mate

  You can use another motherboard to another satellite or Satellite A60.
  But the stronger CPU depends on the chipset located on your motherboard.
  You should first check the specifications of the chipset, and then you know what CPU would be compatible.

  But note; replacing the motherboard is delicate. I doubt you could do this without additional assistance of a technician. In addition the DMI and firmware must be updated after the replacement of the mobo. This is necessary because the CPU would stick with 600 Mhz if the microcode would not be updated. This can be done by a technician of ASP.

  That's why I donation to recommend t this is

• Question of Eve Equium A60-155

  Hi all

  I an Equium A60-155, which was set up a few times (some with DVD original recovery and a few with the Windows XP Pro CD standard), but has still a problem persistent... whenever the unit to standby and then brought out of standby, it fires upward, but with a black screen and no response from the keyboard. The only way to get into Windows is turned off manually and restart normally.

  Someone else had this problem or a solution? I think it might actually be the hardware at fault because he had so many different re - installed.

  Hello

  I read that the graphics driver and BIOS upgrade might be very useful in such cases.
  You should compare the pre-installed driver and BIOS versions with the versions on the Toshiba page. If there is a newer version, then I recommend to update these applications.

  Your comments would be very appreciated.

• Equium A60-155: can't access CD/DVD drive

  I own an Equium A60-155 with an extra 512MB memory installed. My problem is with the carpet * a DVD Super - multi Drive.

  When I insert a disc the busy light flashes for about 5 seconds, I hear a small amount of activity, but then it just stops and it stays on permanently. If I try to access the drive through windows, it seems to be empty!

  I had this problem before and it sets just once! I don't think that it is windows such that the drive has the same way (busy light always on, if the disc is in the drive) before even windows has started. My warranty ran out earlier so he sent set is not an option?

  Does anyone have any ideas, what is the problem?

  Hi Joe

  I put really know what can help, but you can try to remove the drive from the Device Manager list. Restart the device and check the functionality again. After you restart the new hardware (CD/DVD-ROM) unit will be recognized and installed correctly.

  If the problem persists with any type of media (original music CD and DVD) it can really be some malfunction of the equipment.

• My opinion on the Toshiba Equium A60-155

  I've had an Equium A60 - 155 during almost a year now and I'm quite impressed by it. For £730 I paid for it, not worth it.

  I had to increase the ram with another stick 512 for another £60 as the laptop does not work even with the standard 192. By that, I mean system breaks down, abnormal system responses, spontaneous reboots, system files/missing features, anti-virus program, just basically a machine unreliable, unusable failures.

  I will say that now the extra ram is installed, the software is more stable and most previous problems disappeared. But Toshiba is expected to have delivered it with 512 MB in the first place!

  And the battery on this is terrible! There is barely even a laptop! On a good day with battery all the saving settings on max I get about 50 minutes of it--and Yes, a year ago, when it was new, it would last together 30 more minutes at about 1:20. At the point where the thing was started in Windows and you install to work, it is for food then you might as well forget about asking him and always run from the network.

  How Toshiba charge that kind of money for a laptop that has this kind of performance? There is nothing on the laptop that can justify this money... the graphics card? Average. The processor? Celeron - enough said. The motherboard? Standard. The battery life? Laughable. The DVD burner? A bonus, but not worth the extra money. The size? Large.

  Just that there is more that I could do about it I wish and Toshiba could be made aware of the misery that they have caused me (and probably many others) during this 'portable '.

  * Note to the mods - please do not remove this post once again. Why do you feel the need to remove it anyway? Send me an email.

  I don't want to sound harsh, but you shouldn't really complain if you had bothered to check the specifications before you buy. Regarding the system crash that you can't just blame Toshiba is much poorly written drivers in XP bugs bugs in the BIOS firmware. Make sure you have XP installed with all the latest service packs for updates also updates BIOS (there has been 3 since I bought my A60-181) and if you want to try a different operating system to install Linux or use a distribution like Knoppix bootable CD.
  The battery life on laptops are poor, in general, I have seen some rival brands that quoted 1.5 hours but that the technology for you and having a processor Celeron doesn t s helped no more. That said that 50 minutes seems short for load complete so I recommend to contact Toshiba and see if they replace.
  The Admin of this forum is probably done only by ensuring that all messages on this forum to help are useful asking the nature. Making negative comments about products Toshiba on a Toshiba forum isn't clever but if you have a problem, then ask for help instead.

  see you soon,

  Richard S.

• Driver error to display on my Equium A60-155

  I have an Equium A60 - 155. I've had consistent problems where I get a message saying that my ati display driver has stopped working. I downloaded again the driver and still no change. I've seen the blue screen of death several times but do not see it for quite a long time to read it is said but it does not specify the ati driver again.

  Can someone PLEASE tell me what to do!
  It makes me crazy!

  Blue screen of death shows usually only two things: corrupt or poorly written discs or a defective hardware such as memory.
  First of all I would like to start by testing your system for that RAM, I recommend a program called memtest86 - http://www.memtest86.com/
  If your RAM is exceeded then the problem may be driver or hardware related. Unfortunately solving BSOD problem can be a real pain, so it might be useful to consider using the product just recovery DVDs make sure you backup that all your personal data files because this procedure will destroy all data.

  Richard S.