Error 3371 with quickbooks pro 2009!

Similar Questions

• INSTALLATION OF QUICKBOOKS PRO 2009

  I tried to download Quickbooks Pro 2009 and am getting the Error 1935 which is this configuration requires .NET framework. Called quickbooks and spent 1 hour 30 minutes on the phone with them and they were unable to help him. IDEAS ANYONE PLEASE

  This Intuit support have to say about this...

  http://support.QuickBooks.Intuit.com/support/pages/KnowledgeBaseArticle/a5fe2972 Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• Cannot use iMac 27 mid-2010 - yosimte - display target with mac pro 2009 - maviricks - well that I use the mini display cdmi Caron

  I have an imac 27 inch, mid-2010 and I'm trying to use it as screen target with mac pro 2009 and I do the step open two computer connect with cable - hdmi - mini display but has not detected

  I have mac with os x yosimete and mac pro have the mavericks

  According to the use of your iMac as a display with the target - Apple support display Mode, it requires a 'Mini DisplayPort to Mini DisplayPort' cable.

• Errors C++ with Quattro pro (resolved)

  Hello

  Just installed Corel Family Pack 5 in a 64-bit Windows 7 system. This is a new system. Word Perfect works fine but I get errors with Quattro Pro. I found similer threads but no good answer.

  The error is:

  Microsoft Visual C++ Runtime Library
  Runtime error!
  Program: C:...
  This application has requested the execution to terminate in an unusual way.

  Nothing happens that the program will not work. Have tried uninstalling and reinstalling without success.

  I found a modest work but rather strange autour for the issue but do not understand how this work could some possible work. I discovered this by accident. I remember the first day I saw Quattro Pro works as I tested it when I installed it.

  Then, I started to think and remember the file I tested it on a flash drive. So I got out the flash drive and found a file and clicked on it, all open as it should. Could even open the program from the shortcut on the start menu. So I then copied the file on the desktop and safely removed the flash drive and tried to open the file again got the same errors. Replaced the flash drive and everything works again.

  Decided to try the other flash drives those untouched without files on them what so ever and that's with a connected flash only drive in the works of Quattro Pro (11) fine. Remove the flash drive and he leaves again.

  I do not understand what having a flash drive all attached flash player would have to do with the programme of work, but it does. It would be awesome if someone had an answer to this question. But at least I can use the program with a connected flash drive.

  Thanks in advance for any answers to this. Maybe a few days before I can return.

  V

  After hours of internet research I finally found a solution to this problem. I found others asking the same question but no answer. Finally, I came across the solution directly on the site of Corel. I have checked several times before, but didn't find the answer.

  The solution is very simple, but requires to go into the registry.

  This is a quote from the Page of Corel.

  OK I know it says Vista but I took a chance and tried it on Windows 7 64 bit and it worked.
  Note the registry path that indicates a key file called 13, which is actually a variable as I have Family Pack 5 and my 13 called 11. It seems that this problem is also the Quattro Pro 11, 12 and 13, maybe even older and more recent versions also.

  Delete this key removes the list of Quattro Pro Recient.

  "Answer ID 760250 - why I a Visual C++ Runtime Library error when launching Quattro Pro®?

  Some users report intermittent errors, such asVisual C++ Runtime Library error causing an abnormal program Terimination when you run Quattro Pro® on Windows VISTA.

  This problem has been reported to our development team.

  To work around this problem:

  1. Click Start, programs, accessories, and run.
  2. In the open window, type: regedit, and then click OK.
  3. Choose the path following HKEY_CURRENT_USER\Software\Corel\User Assistant\13\Recent Work\Quattro Pro\
  4. Right-click on the file in Quattro Pro, select Delete.
  5. Say Yes when you are prompted to delete the key.
  6. Close the registry editor
  7. Launch of Quattro Pro.

  Link to the full article on the site Web of Corel.

• When trying to email from quickbooks pro 2009 to outlook express 2007 I get a message indicating delivery to the following recipient failed

  Outlook express 2007 is having a time difficult send/receive e-mail messages from quickpro2009

  There is no such thing as Outlook Express 2007.

  How to ask a question:
  http://support.Microsoft.com/kb/555375

• MacBook Pro 2009 with slow SSD on El Capitan

  Hi all

  I recently put on the upgrade to El Capitan of Mountain Lion, that my Macbook Pro 2009, updated with a crucial v4 SSD and 8 GB ram, was very happy.

  Had a very difficult installation that hung a few times, but finally got it set up after resetting the PRAM.

  Since he has been very, very slow - beachball right turns and towers - opening an application are a 5 minute job. Printing takes 10. The SATAII connection shows as being to 3 GB, so it should be good. Any other El Capitan on a 2009 MBP running seem happy with it. I activated the trim, it made no difference.

  I was not able to find someone else in line with the same config or problem, so grateful if someone has experience - I was wondering if it is worth getting an SSD different, or even the original HDD back in?

  Thank you!

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9

  My new copy of Quickbooks Pro 2012 seems to have a problem of compatibility with Explorer 9.  If anyone has experienced this problem and do you know a solution?

  Hello
   
  What is the full error message?
  The average while you can also contact QuickBooks for additional help.
  Here is the link: http://community.intuit.com/quickbooks

• QuickBooks quickbooks pro 2008 informed me is not compatible with windows 7. You say it is. Is it?

  QuickBooks pro 2008 - is compatible with windows 7.

  Hello world!

  Just to clarify; only in QuickBooks 2010 (Pro, Prime Minister and the Business Solutions) is designed to be compatible with Windows 7. You can always install and run QuickBooks 2008 and 2009 on Windows 7, but you can encounter problems that intuit cannot solve. Here is the article from the QuickBooks support this term to this:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/898435

  Thank you!
  Amy
  http://community.Intuit.com

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Use the iPad pro as a second screen on a Macbook Pro 2009 with OSX running on it.

  Hello
  I am to buy an iPad Pro and I would like to know if there is a chance that it might be connected as a second monitor on a Macbook Pro 2009 running Mac OS x Snow Leopard 10.6.8.
  Thanks in advance for your help.

  M.

  Hello

  You cannot connect them with wires. You can, however, all these 2 combinations of applications, use using your wifi home network:

  http://Lifehacker.com/the-best-second-screen-app-for-iPad-1706351639

  http://getidisplay.com/

  However, they all need two OS 10.9 (Mavericks) or later, which means that the configuration is not possible under Snow leopard.

  Your Macbook Pro supports the latest OS X (El capitan), you can update, although it will significantly slow down your computer as well unless you add an SSD.

  See you soon,.

  James

• MacBook pro 2009 with new SSD try to clean install Yosemite or TM disaster restoration.

  Hello.

  I think this is going to be a difficult discussion.

  Unibody MacBook Pro 2009. Original Apple HDD with Yosemite 10.10.5.

  Two months ago, that my HARD disk is dead.

  I installed a new SATA II Toshiba 1 TB HARD drive and through the recovery of TM all went well.

  A couple of weeks, my 'new' SATA II Toshiba 1 TB HDD started to scratch a little (I mean literally zero while reading/writing), so I thought he would die soon again. This time, I decided to buy an SSD in order to have better performance and superior durability.

  So I bought a Toshiba 248 Gb SSD. I'm not a big fan of Toshiba, but where I live, it's the SSD only I found in the store.

  I removed the old HDD, I installed the new SSD and where my nightmare starts.

  First of all, I tried with a new Installation of USB from Yosemite. I followed all the passages and the installation completed in about 9 days. Yes you read that right: 9 days. The progress bar runs for 9 DAYS.

  At the beginning I obviously interrupted the first couple of facilities when the progress bar was like "12 minutes at the end" for three or four hours, but then I read in many articles and support threads that it is quite usual installation seeks stuck for hours or days, but if you open the log console computer is always something. So I gave him his time and the third or the fourth installation I waited my NINE DAYS to be finished.

  Then when the installation ended the restarted mac of himself and is stuck at the loading screen with his beautiful Apple and the progress bar frozen at about 50%.

  I froze for about 4 or 5 hours of average.

  I found a few articles that sometimes happens, and all you have to do is to force the computer to shut down and start again. So I tried to force the shutdown by holding down the power button and after the reboot it just keeps starting with and stuck at first infinite progress bar.

  So I reboot on CMD + R to get a clue, if I got in trouble on the SSD or what. I run disk utility and found that on my SSD were about 290,000 files and many files as the Yosemite was finally installed. I tried to check the permissions, but it says less than a minute and then got stuck at halfway to complete 15 minutes, so I stopped it.

  After that I think 4 or 5 attempts to start new fresh install on my Yosemite and clean, I reset the SSD erase decided to start all over again.

  I died a little inside while doing it. Same as the erasure was so f * king quick to finish! (about 50 seconds, sonofa 'byte').

  Then I tried to not reinstall Yosemite again (the nightmare of 9 DAYS still has me) but I have tried a new way: recovery of TM.

  Just to say my original TM backup was about 340 GB and my new SSD is 248 only while it was quite clear he wasn't.

  I connect my external TM drive to another computer and I worked the ' delete all backups of * file * ' to get a smaller backup TM.

  Now, I moved a lot of things outside the TM backup and the new dimension of the TM backup is about 90 GB (I want to say that the whole folder backups.backup is about 90 GB), in fact I moved the other stuff was also inside the external Western Digital drive and is now free space Go 910 (, hence the content of the WD is just the TM backup folder this weight about 90 GB), but I still have the 'this drive doesn't have enough space to restore your system.', it's totally A LIE.

  Never mind. I accepted the idea that sometimes even computers are ashamed of themselves and begin to tell lies. I can handle. There was a holy man in the history without any sin. So, ok, no problem. I'm not upset or anything. I can get over it (mf you little liar!).

  Think of manually restore the files that I needed once I have a BONE in my new SSD, I used the same external disk to create a new backup from another computer, my Mac Mini TM. Everything went well and I got a new Mac Mini TM backup about 60 GB (it's much less than 248 GB of my new SSD).

  I reboot the Macbook again to try to restore the backup, Time Machine of Mac Mini and everything seems to work, except for:

  -progress initially said about 650 hours needed to complete the restoration ago.

  -I went to sleep and let the machine itself working together on the restoration and when I woke up this morning I found that the rest of the time was "fair" 52 hours.

  -J' was a little happy to see this, until the Rainbow rolling ball appears. Everything got stuck again. I force shutdown and then try to restore it.

  Now it works again and the remaining time is close hours 672 (and growing). I'll give it another chance. We'll see.

  Now, I have four questions to ask you:

  1. you have an idea (with the exception of a curse or a matter of black magic) WHY all this happened? And of course if there is something wrong and I can work to fix it otherwise?

  2 are there special settings to enable/disable/configuration/whatever to create works faster still to understand that it doesn't properly before discovering this NINE DAYS or 672 HOURS right now?

  3. when we agreed that something like that was acceptable? I used to be a project leader in the world of ICT and in 20 years I NEVER, I say NEVER, released a product/app/site Internet/solution that considers that an option taken 9 DAYS to install or something like that. NEVER. Do not forget that we are talking about Apple and an operating system. I think Windows is laughingly taking revenge.

  4. do you think that for me it is time to let Apple and go back WIN + PC? It's quite frustrating and I use the computer to WORK, not to play games video and this is not the kind of operativity expect after paying a little more for material, a little more for software, a little more to be part of what it is supposed to be the one that had the best choice (index not be not it kills me).

  I thank in advance for any help/tip, you can provide.

  Alberto

  This is a fairly long post. What I would say is:

  1. the next time get a hard drive from a company with a good reputation like Samsung (best SSD ever, I have several internal parts and a laptop EVO). I get them shipped.

  2. as you use the Mini, the recovery partition allows you to install a new copy of Mac OS X, and then use the Migration Wizard to move your stuff.

• I get access of 1334-remote error Quickbooks Pro 2011.

  Original title: Intuit told me to contact Microsoft about the "error 1334-remote access" that I get on Quickbooks Pro 2011 like Intuit said Windos know about it and has the fix. Can someone help me?

  I have wave Quick books Pro 2011 on my computer.  The couple of months whenever I turn on the computer, I get the message 'remote access' is not installed not (error 1334).  Intuit said to ask Microsoft to the difficulty that they were aware of the problem.  Nobody knows the answer as to what I do to not get this message all the time.  I have same gt is when I'm in other programs.  Joyce

  Hello

  QuickBooks working correctly?

  If so, I suggest you to disable remote access or such an application to start.

  Follow that the Article mentioned below, which tells you how to disable a startup application.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  You can also view the Intuit link mentioned below:

  Please follow the steps in the below mentioned link and check to see if they help.
  http://support.QuickBooks.Intuit.com/support/articles/SLN41925

• Question multi-user QuickBooks Pro 2007 with Windows 7 64 bit

  Running Windows 7 Home Premium. I meet a "error-6147, 0 is not a Quickbooks data file or there is a problem with the file" when you try to open a company file hosted on a 32-bit Vista computer. This only happens if the company file is open about hosting computrt. If the Windows 7-based computer opens the file of company first of all, there is no error... and then the host computer can open the file without problem. Hoping someone here has an idea... QB support came in white.

  Hi BigMrSteve,

  Follow the instructions in the article and see if that helps

  Error: "this is not a QuickBooks data file or there is a problem with the data file. "Please contact Intuit Technical Support and provide them with the following error codes: (-6147, 0).": http://support.quickbooks.intuit.com/support/pages/knowledgebasearticle/677ba277

  To get help, I would say that you communicate with QuickBooks to the below mentioned link:

  http://support.QuickBooks.Intuit.com/support/default.aspx

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keep getting a memory could not be written error with Acrobat Pro XI

  Hello

  Below is the error I keep seeing on my windows 7 Adobe Acrobat Pro XI enforcement machine. It happens with any PDF that I opened and when it pops up it force closes xi pro adobe acrobat and does not allow me to save all data before it happens. In general, it gives me 20 seconds before it closes so if I am fast enough I could save it, but it does every 5 minutes or more.

  

  Things I've tried...

  1 tried to use the cleaning of adobe tool to uninstall acrobat adobe pro xi completely from the computer, rebooted, reinstalled (same error at the same place)

  2. tried using forefront endpoint protection for not full system scan (what we use in our company) - no viruses (same error at the same place)

  3 tried to delete the user profile that has the question on our machine of the company, the addition of a new blank profile with acrobat (same error at the same place)

  4. I tried to reinstall windows (wipe everything) and reinstall acrobat (same error at the same place)

  5 tried to run memtest for my RAM and RAM integrated test tool, no error on RAM (same error even location)

  6. replace the RAM and motherboard in case there was a problem of memory onboard (same error even location)

  7. now, I gave the user a ready computer, same configuration and it works fine. No other program gives this error, but Adobe Acrobat Pro XI, and now I have a second user with a new laptop Dell get this error at the same place.

  We have a lot of users on the site using Acrobat if it was only 2 of a possible 3 k users having this same exact error, so don't know why it does on 2 completely different computer types. Any suggestions would be most useful at that time I tried registry fixes, changes to "memory could not be read error" but that does not help that I found on this forum.

  Thank you!

  -Troy

  Hi Troy,

  I see that you have completed the major part of the basis of troubleshooting.

  Please contact support for more advanced troubleshooting.

  Contact the customer service

  Kind regards
  Rave

• With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  Hello

  Here are the steps.

  Install a cable Audio virtual on your machine:

  http://virtual-audio-cable.en.softonic.com/

  Under HW Audio Configuration configured Virtual audio cable as default input device

  And value clock maser virtual audio cable and try reading.

  This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.

  Vinay