Error ADADMIN

Similar Questions

• Errors with adadmin & adpatch

  Dear experts,

  I made a clone of my production envirnoment, currently I am facing following errors with 'adadmin' & 'adpatch ":

  Error: LD.so.1:: adadmin: fatal: /oa1/oa01/app/apps/tech_st/10.1.2/lib/libclntsh.so.10.1 bad class ELF: ELFCLASS64

  Killed

  -J' tried the following solution, but error still exist:

  1 mv $ORACLE_HOME/lib32/ldflags ldflags_bckp

  2 ln s $ORACLE_HOME/lib/ldflags $ORACLE_HOME/lib32/ldflags

  3. as root, cp/usr/css/bin/make/usr/bin /.

  4. as a root, chmod 777/usr/bin/make

  5. as root, chmod-r $777 ORACLE_HOME/bin

  6 cd $ORACLE_HOME/bin

  7 genclntsh

  # completed without error

  8. connect all

  After "repeat" completed, I tried to run the "adadmin", but the error still exists.

  PLEASE ADVICE...

  # My cuurent envirnoment:

  Operating system: Oracle Solaris 10

  Application: 12.1.3

  RDBMS: 11.2R2

  # .profile file:

  . /OA1/oa01/app/apps/apps_st/appl/TEST_kpcappl1.env

  ORACLE_HOME = /oa1/oa01/app/apps/tech_st/10.1.2

  Thank you very much for you all, that the problem has been resolved, as follows:

  Reference: Doc-ID 604084.1

• Problem of migration to R12: adadmin: cannot run [Exec format error]

  Hello:

  When I ran $adadmin, got: adadmin: cannot run [Exec format error]

  I followed Note: 438086.1 , (it is a level of HP for Linux migration), copied APPL_TOP, some COMMON_TOP, created the context file, ran adconfig, applied the patch manifest.

  (1) tried to run adadmin, had: adadmin: cannot run [Exec format error]

  (2) when applied manfest patch, I have continued on the lack of lib, lib... do not recognize

  (3) when run adrelink.sh force, the log file contains information of source environment

  (4) after adconfig, AD_TOP/bin files $ reduced from 112 to 47. the adconifg.sh disappeared.

  Help, please!

  Thank you in advance.

  Hello

  If your application manifest patch completed successfully, you should be able to use adadmin, I guess.

  Can you post every steps you performed with the controls probably. Automatic configuration of installation completed without problems?

  Post log files like also clear patch

  Concerning

  SANAE

• ADadmin fails with adusnapMaintainSnapshot(): error calling adusnapUpdat

  Hello
  
  When I am trying to run adadmin, his failure with the following error.
  
  
  "adadmin.log_new" 11105 lines, 221535 characters
  
  File 'CUSTOM.pll '.
  Either No Version error(-4) or unknown
  
  Failed in adusnapGetDetailFileInfo()
  Error of Administration AD:
  Failed to store info file Snapshot
  adusnapMaintainSnapshot(): error calling adusnapUpdateCurrentView()
  Error calling adusnapMaintainSnapshot
  
  
  Time is: Friday, November 20, 2009 21:36:13
  
  
  Backup restart files, as appropriate. Fact.
  
  You must check the file
  /XXX/log/ADadmin.log

  Danny,

  You have the env file created successfully on this node? Can create you the file env through adadmin or you get the same error? See (Note: 1056213.6 - ADRELINK ERROR: LIBRARY of PRODUCT FOR the PRODUCT 'AS' not FOUND).

  If none of the help above, so I think that the problem is due to missing libraries and this explains why you can not recreate a link to adadmin. Missing library files is because the patch manifest was not successfully, and so adadmin cannot be reprinted in the moment. So, you either build the new patch and apply, in this node and then see if you can recreate a link to adadmin or update the SR with the error you receive now.

  Kind regards
  Hussein

• ADadmin and adpatch error: could not get the vault passwords

  AD code level: [B.3]

  You chose to abandon your previous session to AD Administration

  and to continue under a new session.

  Cleaning up the previous session database...

  Complete the cleaning of data base for the previous session.

  Error: Cannot execute the statement <

  Begin

  ad_jar.get_jripasswords (: l_storepass,: l_keypass);

  End;

  > len = 63

  Error of Administration AD:

  ORA-06550: line 3, column 1:

  PLS-00201: identifier ' AD_JAR. GET_JRIPASSWORDS' must be declared

  ORA-06550: line 3, column 1:

  PL/SQL: Statement ignored

  Error of Administration AD:

  Unable to get the vault passwords

  #############################################################################################################

  AD code level: [B.3]

  Error: Cannot execute the statement <

  Begin

  ad_jar.get_jripasswords (: l_storepass,: l_keypass);

  End;

  > len = 63

  AutoPatch error:

  ORA-06550: line 3, column 1:

  PLS-00201: identifier ' AD_JAR. GET_JRIPASSWORDS' must be declared

  ORA-06550: line 3, column 1:

  PL/SQL: Statement ignored

  AutoPatch error:

  Unable to get the vault passwords

  ############################################################################

  Tried this:

  SQL * more: version 10.1.0.5.0 - Production on Tue Oct 13 09:28:29 2015

  Copyright (c) 1982, 2005, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > see connection parameter

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  SEC_CASE_SENSITIVE_LOGON boolean FALSE

  SQL > grant execute on sys ad_jar;

  Grant execute on ad_jar sys

  *

  ERROR on line 1:

  ORA-04042: procedure, function, package, or package body does not exist

  How can this be repaired?

  Hello

  Please see: ADOPTION fails with the error "PLS-00201: identifier ' AD_JAR.» ' GET_JRIPASSWORDS' must be declared ' (Doc ID 1610328.1)

  Coco - M

• ADADMIN failed in R12.2.4 EBS

  Hello

  While running adadmin EBS R12.2.4 instance we receive following error. "XBSI" is our Top Custom.

  Administration AD warning:

  Product data file

  /U02/Oracle/VISMA/FS1/EBSapps/appl/Admin/xbsi_custoappprod.txt

  There is no product "xbsi_custoapp".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  Reading of data to see what the industry is currently installed.

  Read FND_LANGUAGES to see what is currently installed.

  Currently, the following is installed:

  Status of language code

  ----   --------------------------------------- ---------

  American base of American English

  Your base will be AMERICAN.

  Set up the module information.

  Reading database for more information on the modules.

  Saving the module information.

  Error of Administration AD:

  The following ORACLE error:

  SQL-02112: SELECT... Returns too many rows

  occurred while executing the SQL statement:

  SELECT installed_flag

  OF fnd_languages

  WHERE opportunity = 0

  You must check the file

  /U02/Oracle/VISMA/fs_ne/EBSapps/log/ADadmin/log/ADadmin.log

  to find errors.

  Thank you

  Jeremy

  Problem solved by myself.

  I found duplicated in the table "fnd_languages" lines & removed the duplicate lines, now it works fine.

  Thank you

  Jeremy

• Functional error

  Hi all

  EBS r12.2

  rhel6

  The consultant has detected the error and send me this screenshot:

  

  

  

  How can I help?

  Is there something wrong with my new cloned instance of VISION?

  The old instance of vision has not encountered this error.

  Thank you very much

  JC

  Hello

  Can you try below and see if he can help fix the problem.

  Regenerate the forms using the adadmin menu:

  menu to generate Applications files option 1

  option 2 generate the form files

  Coco - M

• PACKAGE BODY APPS. AD_ZD_ADOP contains errors

  APP TIER - Linux - SLES 11 - SP2 - x86_64

  DB LEVEL - Linux for system Z - SLES 11 - SP2 - s390

  I encounter errors in the body to Package APPS. AD_ZD_ADOP, that has brought all the patches to a status quo on our schedule instance.

  The sequence of events have been

  The following hotfixes have been applied.

  1. Patch 19462638
  2. Patch 19197270
  3. Patch 21132723
  4. 19330775
  5. 20677045
  6. 19259764

  Doc 1617461.1 was followed - B path of

  After Patch 19259764 has been applied, all steps until step 8 of Doc 1617461.1 have been completed.

  Failure of the fs_clone step (step 9). My colleague opened a SR - advice was far from expected.

  Yesterday, I took this with success and more cloned the fix for the file system to perform file system (1383621.1) - however, I'm still not able to run fs_clone with success.

  Even a basic ADADMIN session fails.

  Here are the errors while trying to compile APPS package bodies. AD_ZD_ADOP

  SQL > alter package APPS. AD_ZD_ADOP compile body; WARNING: The bodies of Package modified with compilation errors. SQL > show errors; Errors for BODY of PACKAGE applications. AD_ZD_ADOP: LINE/COL ERROR -------- ----------------------------------------------------------------- 2503/3 PL/SQL: statement ignored 2503/7 PLS-00201: identifier ' SYS. DBMS_METADATA_UTIL' must be declared SQL >

  Also while trying to launch ADADMIN, I get errors themselves.

  Error of Administration AD:

  ORA-04063: package body "APPS. AD_ZD_ADOP"contains errors

  Could not insert the record of the action in the table of patches

  Error of Administration AD:

  Error when you try to insert adadmin task CMP_INVALID action

  Update running adadmin of failure actions

  Error of Administration AD:

  The following ORACLE error:

  ORA-01756: city not properly finished chain

  occurred while executing the SQL statement:

  UPDATE ad_adop_session_patches set status = 'F' where status = 'R' and

  as numero_de_bogue ' ADADMIN

  Error of Administration AD:

  Table ad_adop_session_patches update errors

  You must check the file

  /U02/fs_ne/EBSapps/log/ADadmin/log/ADadmin.log

  to find errors.

  Can someone please. I have also a SR - but nice try various channels to find a solution.

  Hello

  The necessary subsidies on the SYS package may be missing. DBMS_METADATA_UTIL.

  Try this command (as sysdba) and compile the package:

  Grant execute on SYS. DBMS_METADATA_UTIL applications;

  Kind regards

  Bashar

• AutoInvoice error: error raamil() error call raapft() call

  Hello

  We took the Autoinvoice in AR and the program terminates with an error.

  The log shows

  Error calling raamil()

  Error calling raapft()

  Anyone has idea what call this error?

  Thank you

  V

  Hello V,

  Autoinvoice is coded in C, and raamil and raapft are included in the C code files.

  I would start with the source code to recompile in ADADMIN. Otherwise, you will need to get the version of the code and log an SR to see if you need a patch.

  You can also use raamil.lpc as a keyword in the search for knowledge management.

  Kind regards

  Cheyrl

• An error occurred during re-Association of the application programs.

  Hi Experts,

  As he tried to apply the patch

  FAMILY PACK OF FIXES (R12. ATG_PF. B.3 (8919491))

  I was getting error while applying the sine qua non patch 9239089 .. Is the error produced when re - link application programs.

  Follow the steps while applying the patch: -.

  • Stop all application services (only the database and the database listener operational)
  • Downloaded the patch (8919491) from Metalink, have also downloaded the patch pre - req (9239089)
  • Unzip the patches for "/ home/applmgr/patches»
  • Now, as a user applmgr source of the environment file and follow these steps: -.
  • [applmgr@oracleupk appl] $. ./APPSPROD_oracleupk.env
  • Issue "adadmin" and select "Enable Maintenance mode", then exit
  • CD < Patches >
  • Now go to the README.txt, he said: we must apply R12. AD. B.Delta.3 as a prerequisite before you apply this hotfix. Merge not R12. AD. B.Delta.3 with this patch. It must be applied separately.
  • So I will apply 9239089 aka R12. AD. B.Delta.3 first patch.
  • Go to the unzipped patch directory (for example: [applmgr@oracleupk 9239089] $ pwd)

  (/ Home/applmgr/patches/9239089)

  • Question "adpatch.
  • When it prompts you to enter the patch driver, enter the name of the driver

  The error of the logfile adpatch : -.

  Reissue of executable links...

  An error occurred during re-Association of the application programs.

  Continue as if it was successful [No.]: Yes

  Made the recovery of executable links.

  STRT_TASK: [Run adjcopy.class] [] [Tue Sep 17 2013 03:32:08]

  Adjcopy.class running:

  adjava-mx512m - nojit oracle.apps.ad.jri.adjcopy @/u01/appl_top/apps/apps_st/appl/admin/PROD/out/apps.cmd

  / bin/sh: adjava: command not found

  I also see warnings in adpatch.log: -.

  AutoPatch WARNING:

  Product data file

  /U01/APPL_TOP/apps/apps_st/appl/Admin/zfaprod.txt

  There is no product "zfa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  /U01/APPL_TOP/apps/apps_st/appl/Admin/zsaprod.txt

  There is no product "zsa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  /U01/APPL_TOP/apps/apps_st/appl/Admin/jtsprod.txt

  There is no product "jts".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  Ankur,

  Please see the following documents.

  Lack of responsibilities after that put 12.1.3 at level [ID 1309852.1]

  SYSADMIN responsibility missing after upgrade to 12.1.3 [ID 1246824.1]

  Troubleshooting missing responsibilities for user [ID 429852.1]

  See also (known on top of Patch 9114911 - R12.HR_PF issues. B.Delta.3 (Doc ID 1075479.1)).

  Thank you

  Hussein

• fix error 13418800

  when applying patch 13418800 e - Business 12.1.3
  I met the following situation

  The two names of files listed below have worked for more than 18 hours

  
  Status of worker Code context Filename
  ------  --------  -----------------  --------------------------  --------------
  1 run R120 generic BENACTIV.rdf running
  2. run R120 generic BENUAAUD.rdf running

  Finally, I had to use
  adctrl 3, quit, Manager of adctrl 5 acknowledges smoking
  adctrl 4 worker Manager job failed

  is there a better solution?

  You can ignore this error for now and continue with the patch, and then generate reports through adadmin (as mentioned above).

  Thank you

  Hussein

• Received the error after upgrading 12.1.2 to 12.1.3

  Hello

  Application: EBSR12 (12.1.2)

  DB: 11.2.0.3

  OS: Oracle Linux5 * 86 X 64

  I got following error while improving 12.1.2 to 12.1.3.

  The following Oracle Forms objects have not generated successfully:

  the IEXCORE.pll resources

  the IEXDLTAB.pll resources

  the IEXFBALI.pll resources

  An error occurred during the generation of the Oracle Forms library files.

  Continue as if it was successful [No.]:

  Please help me what to do. There are about 40 State invalid objects and do not compile with the utility adadmin.

  Kind regards

  Mohsin

  Made with the oracle article.

  How to generate the shape, library and Menu for the Oracle Apps (11i and R12) [ID 130686.1]

  Kind regards

  Mohsin

• Error upgrade R12.1.1 to R12.1.3

  Hi Experts,
  
  Everything by applying the post upgrade patch 9817770 I get the below error:-
  
  adrelink dating status 1
  
  I checked the logfile adrelink and discovered
  
  [applmgr@oracleupk ~] $ grep failed /u01/appl_top/apps/apps_st/appl/admin/PROD/log/adrelink.log | more
  Relink the module 'FEMCCE' failed.
  Relink the module 'MSCCPP' failed.
  Relink the module 'MSCMON' failed.
  Relink the module 'MSCNEW' failed.
  Relink the module 'MSCNSP' failed.
  Relink the module 'MSCNSPNM' failed.
  Relink the module 'MSCPCL' failed.
  Relink the module 'MSCPDW' failed.
  Relink the module 'MSCPRG' failed.
  Relink the module 'MSCSDW' failed.
  Relink the module 'MSCSLD' failed.
  Relink the module 'MSCXGCAL' failed.
  Relink the module 'MSONEW' failed.
  Relink the module 'MSRNEW' failed.
  Relink the module 'FEMCCE' failed.
  Relink the module 'MSCCPP' failed.
  Relink the module 'MSCMON' failed.
  Relink the module 'MSCNEW' failed.
  Relink the module 'MSCNSP' failed.
  Relink the module 'MSCNSPNM' failed.
  Relink the module 'MSCPCL' failed.
  Relink the module 'MSCPDW' failed.
  Relink the module 'MSCPRG' failed.
  Relink the module 'MSCSDW' failed.
  Relink the module 'MSCSLD' failed.
  Relink the module 'MSCXGCAL' failed.
  Relink the module 'MSONEW' failed.
  Relink the module 'MSRNEW' failed.
  
  FYI, the two prerequisite them patches are applied before the application of 9817770
  * R12. BDM B.Delta.3
  * R12. ATG_PF. B.Delta.3
  
  SQL > select BUG_ID from ad_bugs where numero_de_bogue = '9239089';
  
  BUG_ID
  ----------
  777063
  SQL > select BUG_ID from ad_bugs where numero_de_bogue = '8919491';
  
  BUG_ID
  ----------
  789347
  
  While trying to find a solution to this problem, I had this 1128486.1 ID MOS but this note is for Linux OEL5/RHEL5 and am on RHEL6(64-bit).
  Will be provided in the present note workaround solution is adapted to my environment?
  
  version of the installed binutils
  
  [root@oracleupk ~] # rpm - qa | grep binutils
  binutils - 2.20.51.0.2 - 5.11.el6.x86_64
  
  It seems that the AutoPatch is successful. But how can I solve the problem of repeat we can link the files through adadmin again or manually later.
  
  Your assistance in this matter is greatly appreciated.
  
  Thank you
  Ankur

  No, it is not installed. Does this mean I have to redo the DB Upgrade?
  I checked this doc [372363.1 ID], but I thought that it might be a solution without redoing the DB upgrade.

  You do not have to repeat the upgrade, simply install the CD of examples as shown (interoperability Notes EBS 12.0 and 12.1 with Database 11 g 2 [1058763.1 ID]) and to implement the steps that you skipped during database upgrade of the same doc (i.e. create the directory nls/data/9idata).

  Thank you
  Hussein

• Several error objects db after Upgrate EBS 12.1.1 to EBS 12.1.3

  Hello
  
  recently, we have improved our EBS 12.1.1 to 12.1.3 and there is almost 777 objects disabled after recompilation using adadmin.
  
  I tried to recompile INVALID objects using utlrp.sql, but I am getting below error.
  
  SQL > @utlrp.sql
  SELECT dbms_registry_sys.time_stamp ('utlrp_bgn') timestamp of double
  *
  ERROR on line 1:
  ORA-00904: "DBMS_REGISTRY_SYS." "" Time_stamp ": invalid identifier
  
  
  DOC > the following PL/SQL block calls UTL_RECOMP to recompile invalid
  DOC > objects in the database. Recompilation duration is proportional to the
  DOC > number of invalid objects in the database, so this command can take
  DOC > a time to run on a database with a large number of invalid
  DOC > objects.
  DOC >
  DOC > use the following queries to track progress of the recompilation:
  DOC >
  DOC 1 >. Query returns the number of remaining invalid objects. This
  DOC > number should decrease with time.
  DOC > SELECT COUNT (*) FROM obj$ State WHERE (4, 5, 6);
  DOC >
  DOC 2 >. Query returns the number of objects compiled so far. This number
  DOC > should increase over time.
  DOC > SELECT COUNT (*) FROM UTL_RECOMP_COMPILED;
  DOC >
  DOC > This script automatically chooses the recompilation of series or parallel
  DOC > based on the number of available CPUs (cpu_count setting) multiplied
  DOC > by the number of threads per processor (parameter parallel_threads_per_cpu).
  DOC > RAC, this number is added on all RAC nodes.
  DOC >
  DOC > UTL_RECOMP uses DBMS_SCHEDULER to create jobs for parallel
  DOC > recompilation. Jobs are created without instance affinity while they
  DOC > may migrate across RAC nodes. Use the following queries to check
  DOC > if UTL_RECOMP jobs are created and function properly:
  DOC >
  DOC 1 >. Query showing jobs created by UTL_RECOMP
  DOC > job_name SELECT FROM dba_scheduler_jobs
  DOC > WHERE job_name like '% UTL_RECOMP_SLAVE_ ';
  DOC >
  DOC 2 >. Work UTL_RECOMP showing queries that run
  DOC > job_name SELECT FROM dba_scheduler_running_jobs
  DOC > WHERE job_name like '% UTL_RECOMP_SLAVE_ ';
  DOC > #.
  DECLARE
  *
  ERROR on line 1:
  ORA-04067: not executed, the package body "APPS. UTL_RECOMP' does not exist
  ORA-06508: PL/SQL: called program unit is not found: 'APPS. UTL_RECOMP.
  ORA-06512: at line 4 level
  
  
  SELECT dbms_registry_sys.time_stamp ('utlrp_end') timestamp of double
  *
  ERROR on line 1:
  ORA-00904: "DBMS_REGISTRY_SYS." "" Time_stamp ": invalid identifier
  
  
  
  PL/SQL procedure successfully completed.
  
  DOC > query indicates the number of objects that were compiled
  DOC > with errors (things that compile with errors have status set to 3 in)
  DOC > obj$). If the number is higher than expected, please examine the error
  DOC > messages reported with each object (using SHOW the ERRORS) to see is they
  DOC > point to the constraints of misconfiguration or a resource system that must be
  DOC > fixed before you try to recompile these objects.
  DOC > #.
  Select COUNT (*) 'OBJECTS WITH ERRORS' of $ obj where status = 3
  *
  ERROR on line 1:
  ORA-00942: table or view does not exist
  
  
  DOC > query indicates the number of errors caught during
  DOC > recompilation. If this number is nonzero, please you interrogate the error
  DOC > messages in the table UTL_RECOMP_ERRORS to see if one of these errors
  DOC > are due to a misconfiguration or a resource of the constraints that must be
  DOC > fixed before objects can compile successfully.
  DOC > #.
  Select COUNT (*) "ERRORS during the RECOMPILATION" in utl_recomp_errors
  *
  ERROR on line 1:
  ORA-00942: table or view does not exist
  
  
  DECLARE
  *
  ERROR on line 1:
  ORA-00942: table or view does not exist
  ORA-06512: at line 31
  
  
  BEGIN dbms_registry_sys.validate_components; END;
  
  *
  ERROR on line 1:
  ORA-06550: line 1, column 7:
  PLS-00201: identifier ' DBMS_REGISTRY_SYS. VALIDATE_COMPONENTS' must be declared
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  
  
  Please advise to others.
  Thanks in advance,
  NISH

  SQL > @utlrp.sql
  SELECT dbms_registry_sys.time_stamp ('utlrp_bgn') timestamp of double
  *
  ERROR on line 1:
  ORA-00904: "DBMS_REGISTRY_SYS." "" Time_stamp ": invalid identifier

  Please see (ORA error Utlrp.sql return to year-00904: "DBMS_REGISTRY_SYS".) ("" Time_stamp ": invalid identifier [ID 1487630.1]).

  Thank you
  Hussein

• Jumped error

  Hello friends
  
  Recently, I upgraded the Oracle Applications of 12.1.1 to 12.1.2 for which I used the following document:
  http://www.appsdba.info/docs/oracle_apps/installation/R12/Upgrade_R1211_R1212.PDF
  
  During installation, I found two errors:
  
  I) repeat the error on all executables MSC on Oracle Enterprise Linux (OEL) 5.x/Red Hat Linux (RHEL) 5.x (Doc ID 758831.1()
  As recommended above document (page 7) I jumped this error and continued with the patch, but I found no required binutils package causing the same error on my server so that the document (s) recommended to improve. My question is it necessary to install and update the package even?
  
  (II) second mistake was little pll/fmx failed to compile
  Once again such as recommended in the document I jumped the error, but the document also recommended to "generate the PLL/fmx files manually using adadmin.
  I do not know how to generate PLL/fmx please help or do I leave it as it is?
  
  Server configuration: EBS R12 on 64-bit Redhat Linux 5
  
  Concerning
  
  
  Mohamed Ahmed

  qazianeel wrote:
  Hello friends

  Recently, I upgraded the Oracle Applications of 12.1.1 to 12.1.2 for which I used the following document:
  http://www.appsdba.info/docs/oracle_apps/installation/R12/Upgrade_R1211_R1212.PDF

  During installation, I found two errors:

  (i) mistake to recreate a link on all executables MSC on Oracle Enterprise Linux (OEL) 5.x/Red Hat Linux (RHEL) 5.x (Doc ID 758831.1)
  As recommended above document (page 7) I jumped this error and continued with the patch, but I found no required binutils package causing the same error on my server so that the document (s) recommended to improve. My question is it necessary to install & upgrade in a package?

  You need to install the missing package - Installation of Oracle E-Business Suite and Notes version upgrade 12 (12.1.1) for Linux x 86-64 [761566.1 ID]

  Please make sure you have all packages under the "Required packages" section for your operating system installed.

  (II) second mistake was little pll/fmx failed to compile
  Once again such as recommended in the document I jumped the error, but the document also recommended to "generate the PLL/fmx files manually using adadmin.
  I do not know how to generate PLL/fmx please help or do I leave it as it is?

  Please manually compile and display the error if you get one.

  How to generate the shape, library and Menu for the Oracle Apps (11i and R12) [ID 130686.1]
  R12: How to compile a form in version 12 [1085928.1 ID]
  Impossible to compile the custom using Frmcmp utility form receiving FRM-91500 [563655.1 ID]

  Thank you
  Hussein