Error Blu - ray: 'invalid operation', Code: "19", note: "attributes main video stream must be compatible with the playList.

Similar Questions

• invalid operation code 19

  I am trying to burn a picture bluray using Encore CS5.1, but get "invalid operation code 19? -What it means and why Adobe gets a page about this error, tell everyone what to do about it? I want to only burn a Blu - Ray, which is the purpose of having yet!
  
  

  I think I solved the problem. In my case, it seems to have been the fact that the duration of the video and audio on 2 assets were AN IMAGE off (audio 02:33:18, video has 02:33:19).

  The divergence was apparently the result of export a Premiere Pro sequence to 23.976 29.97 frames per second. Once again, I noticed that my m2v and wav files lengths are different image, I went back to Premiere Pro, and together these two sequences to 23.976, adjusted work areas to ensure that their exit points were not between the frames and re-exported them. Then I removed the previous asset for these 2 files in project yet and this is! I finally have a blu - ray disc! No thanks to Adobe supports either.

• Im trying to download the creative cloud on my Mac but its gives me the error "Installation on case-sensitive volumes is not supported. Please choose a different volume for the installation. (Error code: 22) "can you help me with this please?

  Im trying to download the creative cloud on my Mac but its gives me the error "Installation on case-sensitive volumes is not supported. Please choose a different volume for the installation. (Error code: 22) "can you help me with this please?

  Try error "Unsupported of disks case-sensitive" or similar install error | Mac OS

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• try to download the audio book gives the error "the version of this file is not compatible with the version of windows your race."

  frustrated, the overdrive software download player!

  I tried everything I can think of to download this audio book. whenever I try, I get a message error that says "the version of this file is not compatible with the version of windows your race. check the system and see if I need a 32 or 64-bit and contact the software publisher. "or something like that. I downloaded the overdrive media console software, but every time that I try to download an audiobook, it gives this message. I tried to change the settings with the "use an older program with this version of windows' software overdrive console in Control Panel with no luck. Anyone have any suggestions. I need help please!

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync. >

  I'm trying to set up a cluster, I installed my SQL server DB and Weblogic Portal 10.3.2 on two different machines and each thing is correctly configured according to my knowledge.

  but when I am trying to start my node managed on a remote machine, out of sync error continually as shown below

  < 6 sep, 2014 16:42:02 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:07 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:13 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:18 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  < 6 sep, 2014 16:42:24 IST > < error > < security > < BEA-000000 > < validation events is not available because no JMS Transport is available. The remote L2 caches will be out of sync >

  NOTE: I can connect to my DB using java utils.dbping [MSSQLSERVER4 |] MSSQLSERVERB] < db username > < db and user password > DB_Host:Port / Db_name on two physical machines.

  is there no work around for this problem, as I am not able to get around this error and is unable to start my managed computer node.

  Thank you

  Punishes

  Hello

  Notes on MOS:

  It is an issue that occurs because the RDBMS security store configuration problem. In order to synchronize the RDBMS security store data, WLS uses the JMS topic for transport, which is not met in this case and therefore this error. The solution is to configure the JMS topic according to the above reference documentation. However this post ideally is not an error but a simple warning message. Thus, in the context of the code fix, we delivered a patch for WLS, to change the gravity of this message of 'ERROR' to 'WARNING '. This patch can be downloaded using My Oracle Support Portal using:

  Bug number: 13459424

  Patch ID: NF9G

  Emmanuel

• VMotion error: host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1 'ecx '.

  Problem: I can't move my Exchange vmserver2 a vmserver1 server.

  Error: "host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1"ecx"

  
  Details:

  Vmware KB:

  * Ensure that the hosts have the same features enabled in the BIOS of the servers. If there is an incompatibility between the servers BIOS configuration even if they are physically identical, they always show a compatibility error message. The two most common to check features are the No-Execute memory Protection (NX / XD) and virtualization technology (VT / AMD - V).

  A ran the CPU utility Vmware as referenced by

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003718

  
  "CPU that have similar features. "This means that the need of processors from the same manufacturer (AMD or Intel), be of the same family (Pentium, Xeon, etc.), and have common features extended between ESX servers involved in the VMotion.

  My results:

  vmserver1 Dell Inc.    PowerEdge 2950 2 Intel Xeon E5405 of CPU @ 2.00GHz
  vmserver2 Dell Inc.    PowerEdge 2950 2 Intel Xeon L5410 of CPU @ 2.33 GHz

  They both share exactly the same characteristics:
  FT support
  Enable VT
  VT Capable
  NX/XD
  FFXSR
  RDTSCP
  SSE
  SSE2
  SSE3

  Support Relaxations:
  NX/XD
  RDTSCP

  Relaxations unsupported:
  All THE features of the SSE
  FFXSR
  CMPXCHG18B

  In the 'Show Windows debug' it reads 'of the compatible CPU"

  This virtual Exchange machine works since Esxi version 3.5.  I am testing now vCenter Server 5.0 with version 5.0.1 on the Esxi server.

  Note: I've also been meeting random uses CPU high, leading from Windows Server 2008 to lock up completely.  I have found no trace of problems within the Windows host and Vcenter is not questions.  I have "reset" of the virtual machine in order to get the server back online.  The CPU to the top lock is random and the server can run for days with no problems. * Don't know if it's related...

  Virtual host config Exchange computer:
  Guest operating system: MS Windows Server 2008 64 bit
  version 8 of virtual machine
  CPU: 4vCPU
  Memory: 10240MB
  Overload memory: 420,61 MB
  vSphere HA Protection: protected
  Host CPU consumed: the 209 MHz

  Maps: vmserver1 watch "CPU is not compatible" CPU: 0% (none of the virtual machine running)
  Consumed host memory: 9823,00 MB
  Active memory of Fords: 409,00 MB

  Views of storage: I have a warning symbol on the QNAP iSCSI disk that hosts the virtual Exchange computer but I see no record... I'm new here...

  I understand that vmotion apply restrictions on the movement of VM compatibility to avoid it.  The components of the HA does not apply to these requirements.  We tested yesterday HA, succsessfully and this how we came to be stuck with the Exchange vm on vmserver2 and it cannot migrate to vmserver1.

  I appreciate your time and consideration,
  Tim

  It seems that you have two different processor speeds. Try the VCA mode and also check the BIOS version you and make sure they match.

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  I use a Mac 10.5.8 and your software says it must be compatible with 10.5, but he says it's not compatible with my operating system. Why?

  10.5.8 it is compatible with firefox only with Intel see 10.0:

  http://www.Mozilla.org/en-us/Firefox/10.0/system-requirements/

  for your ppc mac, the most recent is the version that you have 3.6.26 see:

  http://www.Mozilla.org/en-us/Firefox/3.6/system-requirements/

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• rise of Nations pc game United gives an error: "could not initialize services make sure that your video card and drivers are compatible with the game.

  Hi, I recently installed rise of nations pc game but does not work because it says "could not initialize services make sure that your video card and drivers are compatible with the game. What should I do, how can I fix this to get the game to work.

  Hello

   
  1. What is the operating system installed on your computer?
  2. What is the brand and model of your computer?
   
  I suggest you to follow the links and check if it helps.
   
  Known graphics issues in Rise of Nations
   
  Card video known issues
  Known graphics issues in Rise of Nations: Rise of Legends

   

• After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

  I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

  Winload.exe

  Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

  Thank you

  Ryan

  Hello

  Do a clean install of XP with the XP disk provided by Dell, if you.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Vista installation was able to destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

  See you soon.

• Start testapp error "Module: TestApp-1" must be signed with the Runtime RIM signing key code

  Hi all

  Help me please

  I signed my code files with the signign provided blackberry (RRT, CPR, RBB) keys. When I download my application via OTA in my camera, and when I run my application it shows an error like "start Testapp error: ' Module: TestApp-1" must be signed with the Runtime RIM signing key code ".so I signed my application code files, when I opened TestApp-1 to sign it indicates"no signature required"."

  Please anyone suggest me.

  Thank you

  Ashutosh

  I think that JDE currupted. When I compile it with different JDE, he executed well.

  Thank you all to share your experiencewith me.

• This application is not compatible with the operating system installed. Please upgrade to Windows 98SE, Windows 2000 or more.

  Hi all

  I recently installed a mod for S.T.A.L.K.E.R SoC V1.004. The game won't start not even, instead, it gives me the following message:

  This application is not compatible with the operating system installed.
  Please upgrade to Windows 98SE, Windows 2000 or more.

  I'm under Win 8 64 bit. I have uninstalled and rebooted twice (both game and mod) does not.

  I have to downgrade to XP to be able to play this awesome mod, he ran on this platform with the same configuration before, why he now rejects it know not only the people at Ms.

  Please help if possible

  Thank you very much

  Pierre Viljoen

  Probably, all in all probably is a 16-bit program, and as such does not work on Windows 8.0/8.1 64 bit. In addition, the game seems to have 20 years or more. You can try running in compatibility mode, but I think that the game is dead. Hope this helps and if you need help please post and we will be happy to help you.

  The above opinion is mine and casually and does not necessarily reflect that of Microsoft, they are employees. or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe"-John Muir

• When installing CD collection national geographic Gets the error, "the version of this file is not compatible with the version of Windows that you are using".

  Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.

  I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins.  These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?

  Hello malaglinskom,

  In addition to what Azam offered, you may try the following:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Hope this information helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think