Start testapp error "Module: TestApp-1" must be signed with the Runtime RIM signing key code

Similar Questions

• Windows Update error "windows update location must be replaced with the default windows location."

  Original title: Failed to automatically / thru fixit updated windows installation (another) indicates both failed 1 of 5. It says windows update location must be replaced with the default windows location

  XP86 running. Recently had installed the additional memory. Microsoft Update icon never goes away - seems like if 1 of 5 updates usually install on a group. Keep trying to install updates (even those) again and again. Sometimes we will not install and then moved the next time, he's trying to install the same updates, another a group. Worked through say fixit and details window update location must be changed to windows default = - but did not say how.

   

  Hello

  Have you tried Microsoft Fix - it?

  See the following article:

   

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

   

  You cannot install some programs or updates

• Error Blu - ray: 'invalid operation', Code: "19", note: "attributes main video stream must be compatible with the playList.

  Hello

  I can't create a Blu - ray folder or Blu‑ray Image with my project.  Whenever I click on Build, I get this error:

  Purpose of Blu - ray: "< timeline > Untitled chronology", error: "invalid operation", Code: "19", note: "attributes of the main video stream must be compatible with the playList.

  I created my .m4v file and .wav files in Adobe Media Encoder using the H.264 Blu - ray built-in HDTV 1080 p 23.976 high quality.  I also tried to create several variants (encoded Dolby Digital audio, tried the HDTV 1080 p 24 high quality preset).  No matter what I still get the same error above.

  I only have a basic (no movement) menu, but I tried to remove it and still get the error.

  Still isn't my files and I want to keep it this way if possible and use the best rendering of SOUL of transcoding capabilities.  The only change I make for the presets of SOUL must enable VBR 2-pass and use maximum render quality.  Who should not cause the issue?

  I searched the forums and did not find anything.  Someone suggested to restart yet, but that did not help.

  Any suggestions?

  Thank you

  Graham

  I finally got the Blu - ray folder created.  I imported my original uncompressed AVI again and let the transcoding.

  So, the moral of this story is that still did not like the pre-transcoded from Adobe Media Encoder files.  Your suggestion on the audio being a slightly different length as the video could be a possible cause, if SOUL actually creates files with this problem.

• When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  Hi r13hunter,

  It seems that some programs running on the computer fails to load at startup of the system. Try these steps and check the result.
  Step 1: Find the program that causes this problem and delete or fix
  a. Click Start, type msconfig and press to enter.
  b. click on Startup tab, in the list, search for the path of the xbd.exe file and the associated program.
  c. Once you have found the path of the item and the associated program, repair or reinstall the program.
  See Uninstall or change a program

  Step 2: If the problem persists, perform the clean boot to find this good program that is causing the problem to the system startup
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and check if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Ripple packaging error: Oh, Snap! Build request failed with the message: zip i/o error: no zip file or directory error: could not create output file

  I am trying to package and sign an application with ripple and I get this error: Oh, Snap! Build request failed with the message: zip i/o error: no zip file or directory error: could not create output file

  What can possibly be the problem here?

  Solved!

  I had the field output folder of the same value as the name of the archive

• the pdf file is error once I modified my file pdf with the document cloud... (iPad)

  The pdf file is error once I modified my file pdf with the document cloud...

  The pdf file is sync with my account, I'm not able to open the latest version of the pdf file now.

  Any idea to restore to the last edit version?

  Hello

  Would like to inform that after that change the document on the ipad, if we go back to the homepage of the implementation of the changes would save it automatically. There is no possible way to restore the changes.

  Therefore, in this case you will need to recreate the document.

  Kind regards

  Christian

• during the installation of cloud creative adobe, getting the msg to following error "there seems to be a problem with the download process. "Error code: 201.

  during the installation of cloud creative adobe, getting the msg to following error "there seems to be a problem with the download process. "Error code: 201.

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

• VMotion error: host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1 'ecx '.

  Problem: I can't move my Exchange vmserver2 a vmserver1 server.

  Error: "host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1"ecx"

  
  Details:

  Vmware KB:

  * Ensure that the hosts have the same features enabled in the BIOS of the servers. If there is an incompatibility between the servers BIOS configuration even if they are physically identical, they always show a compatibility error message. The two most common to check features are the No-Execute memory Protection (NX / XD) and virtualization technology (VT / AMD - V).

  A ran the CPU utility Vmware as referenced by

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003718

  
  "CPU that have similar features. "This means that the need of processors from the same manufacturer (AMD or Intel), be of the same family (Pentium, Xeon, etc.), and have common features extended between ESX servers involved in the VMotion.

  My results:

  vmserver1 Dell Inc.    PowerEdge 2950 2 Intel Xeon E5405 of CPU @ 2.00GHz
  vmserver2 Dell Inc.    PowerEdge 2950 2 Intel Xeon L5410 of CPU @ 2.33 GHz

  They both share exactly the same characteristics:
  FT support
  Enable VT
  VT Capable
  NX/XD
  FFXSR
  RDTSCP
  SSE
  SSE2
  SSE3

  Support Relaxations:
  NX/XD
  RDTSCP

  Relaxations unsupported:
  All THE features of the SSE
  FFXSR
  CMPXCHG18B

  In the 'Show Windows debug' it reads 'of the compatible CPU"

  This virtual Exchange machine works since Esxi version 3.5.  I am testing now vCenter Server 5.0 with version 5.0.1 on the Esxi server.

  Note: I've also been meeting random uses CPU high, leading from Windows Server 2008 to lock up completely.  I have found no trace of problems within the Windows host and Vcenter is not questions.  I have "reset" of the virtual machine in order to get the server back online.  The CPU to the top lock is random and the server can run for days with no problems. * Don't know if it's related...

  Virtual host config Exchange computer:
  Guest operating system: MS Windows Server 2008 64 bit
  version 8 of virtual machine
  CPU: 4vCPU
  Memory: 10240MB
  Overload memory: 420,61 MB
  vSphere HA Protection: protected
  Host CPU consumed: the 209 MHz

  Maps: vmserver1 watch "CPU is not compatible" CPU: 0% (none of the virtual machine running)
  Consumed host memory: 9823,00 MB
  Active memory of Fords: 409,00 MB

  Views of storage: I have a warning symbol on the QNAP iSCSI disk that hosts the virtual Exchange computer but I see no record... I'm new here...

  I understand that vmotion apply restrictions on the movement of VM compatibility to avoid it.  The components of the HA does not apply to these requirements.  We tested yesterday HA, succsessfully and this how we came to be stuck with the Exchange vm on vmserver2 and it cannot migrate to vmserver1.

  I appreciate your time and consideration,
  Tim

  It seems that you have two different processor speeds. Try the VCA mode and also check the BIOS version you and make sure they match.

• I can't create a new site of catalyst for business with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with the server, try again later. How can I solve this problem?

  I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?

  Thank you

  Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver.  It may have been a conflict of name or something.

  Concerning

  Adrian

• Error message: some updates were not installed with the 800706BE error number.

  I also get the following window appears:

  "Host process for Windows Services stopped working and was closed."  A problem with the application to stop functioning properly. Windows will notify you if a solution is available. »

  Also checked the recent errors in applications and a message from the typical example is the following:
  ' Application failed application svchost.exe_BITS, version 6.0.6000.16386, time stamp 0x4549adc4, broken module ntdll.dll, version 6.0.6000.16386, time stamp 0x4549bdc9, exception code 0xc0000005, offset error 0x00043df3, 0x17ac, 0x01cae58aa986d8d2 time start process id. I also have a window that opens by saying: "HotkeyApp has stopped working.  A problem has caused the problem to stop working properly etc. "

  Anyone got any ideas on how I can fix this?

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/83ba0b9b-30e4-4D32-862c-eb37ceae823f

  http://social.answers.Microsoft.com/forums/en/vistawu/thread/ae6e46cc-25fe-4c8c-b8b1-72fd4fc943fd

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/99c288af-c3d8-4da3-8593-9fc6c7511634

  Read the information on the links above for your error Code and possible solutions to this.

  If this does not resolve the issue:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• How to analyze and clean errors and/or corrupted files that interfere with the operation of the computer

  I have problems with the slow startup and shutdown and the appearance of the desktop with icons of different size with occasional erratic behavior and unexpected reboots which lead me to believe that I probably have a few errors or corrupted files.

  The system is a gateway E6100 recently updated from XP to Vista Home Premium with upgrade software.

  Is there a software out there that I can use to clean the entire system?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error 907: This connection cannot be used with the VZAccess Manager

  original title: error message appear on my screen

  I get this error message appear on my screen every two seconds:
  "This connection cannot be used with the VZAccess Manager.

  Error 907 "

  Hello

  Disable/remove your Verizon Wireless software or contact Verizon for help with this error. Posts like this occur generally when third-party utilities are used to manage connections and issues must be resolved by the Distributor, because they are often specific to that software.

  Verizon support suggest that you go in the Options Internet/Control Panel and on the Connections tab, check the option "never establish a connection" is selected.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• iOS error ITMS-90478 and ITMS-90062 downloading with the Application Loader

  Hello

  When you try to download the latest versions of my apps on iTunes with the application loader, I see these errors:

  

  I unzipped the ipa and checked that the current version number is actually 14.10.0, so I do not know why this error pops up. I tried other numbers version as well without success. I see this error with different numbers for 3 of my 4 apps. These 3 applications are 32-bit architecture right now, I'm trying to upgrade to 64-bit with this build. The 4th app was 64-bit from the start and did not show this error, but I don't know if it is related to the error.

  I compile with the SDK of Air in Windows (18.0.0.180), if that makes a difference. Any ideas why this error keeps popping up?

  Thank you

  The behavior of the two numbers has been changed recently. Previously you could not increase the number of generation without increasing the version number, which, when using test flight of Appl'e system means that the beta has go through approval each time. If you can keep the version number the same, but increase the build number, the new beta does not have to go through approval.

  Watch 'Number of Build in the iOS of the AIR' in the release notes:

  http://labsdownload.Adobe.com/pub/labs/flashruntimes/shared/air18_flashplayer18_releasenot es.pdf

• ORA-39700: database must be opened with the UPGRADE option

  Hello
  Let me explain the scenario.
  I have the oracle with 11.2.0.2 binary. This House is shared by multiple database (around 15 of database).
  Now, I must apply the PSU 5 for one of the database (allows to take the name of the test).
  So I installed 11.2.0.2 new home in the same server and applied the PSU-5 for thati oracle new home.
  I copied the spfile and password at home girl new oracle, associated to the TEST database. Now when I try to start the DB with option to boot he asks me to open the DB with UPGRADE option.
  
  Why should you start the DB with upgrade option because he was running with the same version in old House as well?
  
  I run catupgrd.sql once more?

  PSU patches usually do not require the database to be opened in UPGRADE mode. The obvious explanation is that the source database is not 11.2.0.2 but something lower.

  HTH
  Srini

• Error "Unable to establish two-way communication with the device" Windows 8 with c309g

  Operating system: windows 8, 64 - bit

  computer: desktop

  Home network: network, the computer is on a wired connection, printer is on a wireless connection

  error message: "the computer is unable to establish two-way communication with the device.

  • When you install first of all my husband's new computer, we were able to install the software and connect the printer very well, and the printed test page.
  • A few days later, I installed the HP ePrint app on my iPad, found our printer and tried to print a page of a Web site. Printing failed, and the iPad app gave a message something like "the Word document may be printed." I cancelled again tried the iPad app, print work, and has not yet. I had not heard of AirPrint, so I did that on my iPad.
  • We tried to print the page of the computer instead, but the task has failed.
  • We looked at the parameters of the printer through the computer of windows 8 and found that there are two differently named c309g printer now displayed in the printer list.
  • My husband uninstalled the printer software, the computer restarted and reinstalled and then got the "the computer is unable to establish two-way communication with the device.

  any ideas on what to do next?

  My brilliant husband fixed it. Power cycling the router.