Error code 80070652 and 646 continues upward trying to update my Windows 7 system.

Similar Questions

• I can not install 2680317. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?

  I can't install the update to windows KB2680317 update for Microsoft Works 9.  I get the error code 80070641, not 646.  I tried Microsoft fixit and still no installation.  Any ideas out there?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  And also to try the steps in the following Microsoft article.

  http://support.Microsoft.com/kb/818018/en-us

  Hope the information is useful.

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I have error codes 80070079 and 8007045 D, have tried to install updates several times without success

  Hi all

  I have error codes 80070079 and 8007045 D, have tried to install updates several times without success. They are made to security update & probably really need them.  I was able to other updates but not those four for the last month or two.  Thanks for your help!

  See if this thread is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-7-error-code-8007045D-cant-install-updates/03258f34-3f25-4134-B194-6c18b4acf521>

  UTC/GMT is 01:30 on Monday, July 9, 2012

• Vista - Error Code: 643 and 646 (cannot install updates)

  I tried to do my downloads, and I'm getting reports of errors as follows:

  646

  643

  These say to go to the windows desktop and change the settings in the box OSE I think... no matter... I made the change he told me and I'm still not to install updates... it says, then attach it to pass windows... which I did and it also gave me a notice that failed with code 2738... Anyone know what to do? I have office windows 2003... Please help I have like 25 updates that have never been done because of this

  I need help please!

  http://support.Microsoft.com/kb/KB976982

  You receive error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft UpdateYou receive error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  646

  http://support.Microsoft.com/kb/2258121

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  Or try this:

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Vista - Error Codes: 643 and 646 (cannot install updates)

  A few months ago, I started getting a message when I tried to stop that I had to install 3 updates first.  The problem is installation has failed each time and the message "install 3 downloads" has been causing a delay important whenever I stopped while he goes through the motions of installing the updates.  But they do not have to install each time (according to the update on the computer folder.  I tried all the patches 'easy' and reluctant to mess with the patch that says am ' attention otherwise you will really cause a problem.  How can I solve this problem?

  Error code 643
  http://support.Microsoft.com/kb/923100/en-us

  Error code 646
  http://support.Microsoft.com/kb/2258121

  If the above doesn't work no help, please repost in Windows Update section:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error codes: 80070652, 652, 646 (cannot install updates)

  16 updates failed to install error codes:

  80070652

  652

  646

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Vista-error Code 80070652 when you try to download the update of security for Microsoft Office InfoPath 2007 (KB2596786)

  I keep trying to download and install this update, but it does not settle and get its error code. I do the "Fix it Troubleshooting" thing by going to the Windows website, but the problem is still there. The "Troubleshooting report" says that the "default Windows Update data locations have changed" and that "one of the most updated Windows are configured incorrectly". The report tells me that the problem has been fixed, but he didn't: the update is not installed.

  Hello

  Were there any changes made on the computer before the show?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Method 1:

  I suggest you to refer to the article and run the Microsoft Fix it:

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  See the article and check if that helps:

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  Method 3:

  See the article and follow these steps:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Windows update fails, error code 0 x 80070003. Many.tries to update all the fail?

  Windows * gives me the penalty. All of the updates fail 1 HP and now all from windows. error code 0 x 80070003?

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-error-0x80070003

  If you receive Windows Update error code 0 x 80070003 or 80070003 when you use Windows Update, try this Automatic convenience store.

• I get an error code 80200053, and he says that my media center of windows has a tuner attached. My system broke down and I can restore?

  Windows Media Center

  I tried the update of the program

  .

  What can I do to another short of replacing the Avermedia card to ensure that the computer recognizes the card

  Manasa P

  Thanks, I tried all that none of this has worked. The system has been corrupted. I finally had to pull the card make the system thinks that the tuner card was again hardwsre and I download driver TV Tuner Avermedia m791 NTSC/ATSC and its applications of microsoft (r) Windows Vista (r) and installed the program that worked, and then I followed your instructions on how to configure the parameters and the tuner all over again now my media guide and everything works. Thanks for the help and suggestions.

  gomea

• Error: 0 x 80280006 so that he tried to update to Windows Live Essentials 2011

  Computer: Compaq Presario PC

  Model: SR5130NX

  Version of Windows: Vista

  Problem: I know exactly what I did to cause this: I would open Windows Live Movie Maker and it asked me to update to Windows Live Essentials 2011. I started to let that happen, but then I thought, ' wait, maybe I should cancel this update and check to see if there is already a newer version (for example, '2012') of Windows Live Essentials "(I had no idea at the time where it's the only version of Windows Live Essentials, should I use for Vista). So I cancelled the update and that's where I made my mistake. He canceled for me and said something along the lines of "it may be a problem with one or more of the programs (such as). Now, if I try to open Windows Live Essentials to start the update, I just get the same message on my screen: a small box entitled, circle of "Windows Live Essentials 2011"with a big red with a white 'X', then to the right of which the title, 'You are installing other programs' there." Then he says below, "Please wait until all other programs are finished installing and then try again." Under the heading 'Détails' he said, "You cannot install, uninstall or repair Windows Live programs while other programs are being installed." Under this sentence: "error: 0 x 80280006" and below, "Source: in_use.

  I tried Applications already in the control task manager and nothing related to my problem. I also checked the other answers here to questions similar to mine, but they do not seem to solve my specific problem. Someone will show you please how to undo me, step by step, this problem so I can get the necessary (s) update for Windows Live Essentials 2011 and start making movies with Windows Live Movie Maker? If you can send me to my normal email address: rather than my old, , which would be extremely useful. Thank you.

  Hello

  Make sure all other programs are closed and no installation happens on your computer while you try to install the update of Windows Live Essentials.

  Try the following methods.

  Method 1:

  You try to install the update in the clean boot state and check. Check out the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  You can try to uninstall Windows Live Essentials and re - install Windows Live Essentials from your computer and then try to install the update. Read the following article.

  How to remove and reinstall Windows Live Essentials http://support.Microsoft.com/kb/938275

  If you encounter any questions even if UN-installing or re - install, you can run the fix - it and check.

  Solve problems with programs that cannot be installed or uninstalled http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  It will be useful.

• Getting error code 80004005 When you try to install an update to windows 7

  When you try to install an update to windows 7, I get a failure during Windows Setup. The error code is 80004005.

  80004005 = unknown error 0 x - can occur due to programs/services to interfere in the background.

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Error code 0 x 80070002 when you perform the backup of Windows 7 system.

  I have recently updated from windows Vista to Windows 7 Home Premium
  When I make a backup of the system from the backup is completed successfully, but I get a message that some files have been backed up not.  The message is as follows: Backup has encountered a problem during backup of the C:\Users\Administrator\AppData\LocalLow file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Contacts file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\Administrator\Searches file. Error: (the system cannot find the specified file. (0 x 80070002))
  Can someone tell me how I can locate and fix this problem?

  Control Panel > system and security > Backup and Restore

  The administrator account is disabled by default in Windows 7?  Have you taken steps to activate the (built-in) administrator account?  Unless the administrator account is activated (and used) then these files would not exist on your machine.  The account administrator enabled in Vista and these records was postponed Vista?

  What files (if any) you have to this place anyway?

  C:\users\administrator

  If you configure backup to exclude these files then the error will disappear.  If you are not running the administrator account, then it is probably safe (after saving a copy) to remove all the files found in C/users that belong to the (built-in) administrator account (not active user accounts) and disable the account too.

  enable or disable the build of Windows 7 Administrator account
  http://windows7news.com/2009/02/03/enable-or-disable-the-Windows-7-Administrator-account/

  Do not disable it if you use it.

• Error code 0 x 80070424, as he tried to update windows

  Original title: when I click update it gives me an error Ox80070424, widows xp code

  I get in the security update and it says: I can't do it because of this error and to check the internet connection. my internet is connected. I have windows xp and you use internet explore

  Hello
  
  Please let us know if there's recent changes to the system before the show?
   
  Please follow the steps mentioned in the link below to fix the problem:
  http://support.Microsoft.com/kb/968002
   
  Please respond with the State of the question, so that we could help you better.

• Error code: 0x800CCC0E and can receive but not send emails in windows mail in vista.

  Original title: can receive but not send emails in windows mail in vista.

  I have vista and windows mail.  I can receive emails, but all of a sudden I can't send email.  The connection to the server has failed. Subject ' Fw: Urgent warning... We must prepare!', account: 'incoming.yahoo.verizon.net', server: 'outgoing.yahoo.verizon.net', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

  Set up Outlook Express, Windows Mail or Windows Live Mail for Verizon-Yahoo
  http://help.Yahoo.com/l/us/Verizon/mail/YAHOOMAIL/pop/pop-08.html

  If all the settings are correct, turn off e-mail scanning in your antivirus software. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.