Error code 800F0816 installation updates
Same problem with 4 of these Windoiws updates KB2507938, KB2532531, KB2533623 and also KB 2555917 (think I doscovered had failed to update 6 times) I am running Windows 7 Professional 64 bit. The troubleshooting tool Windows Update said that it had fixed a problem so I tried again without success. SFC ran and it found no problem. Today, I tried with boot without success; also downloaded and ran System Update Readiness Tool for Windows 7 from Microsoft for x 64 based systems (KB947821) {may 2011}. Who spent about 40 minutes, buzzing and clicking on, but when I re downloaded updates from a boot that he does not have. Really be cheesed enough.
When you install KB2507938 and others today on my Vista SP2 32-bit on Acer Aspire 7735 I couldn't start the laptop over. I needed to return to the configuration of the system later by the Windows tools. In the update log, I see the error code 800F0816 for the following updates:
KB2507938
KB2533623
KB905866
KB2555917
KB2532531
Any ideas why it's a failure? Should I try to stop the Windows Firewall, and then install and start the firewall up later? Any help appreciated.
Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
Tags: Windows
Similar Questions
-
Error code 80072efe installation updates
original title: I am reciving error 80072efe code what it means and how to fix it?
just try to install my updated service to update and it fails due to error code 80072EFE help set?
Hello
This rootkit has been known to cause this problem.
TDsskiller (Rootkit removal tool)
http://support.Kaspersky.com/viruses/solutions?QID=208280684Then, restart and check the updates.
To search for other malware use this scanner:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx==================================================================
If necessary:
Run 1 SFC
Start - type this in the search box-> find CMD at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228------------------------------------------------------
Try this: (it is Advanced B method in the Article below)
Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN
At the prompt, type or copy and paste:
netsh winhttp reset proxy
(Press enter)
See if the update works now.
------------------------------------------------------
Then check out this article:
Update to install updates<-- check this="">-- check>
http://support.Microsoft.com/kb/836941Do these two and try updates
Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
Server 2008 R2 Release Candidate for Windows 7 Release Candidate
http://support.Microsoft.com/kb/947821/How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058=============================================
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I get an error code 85 installation update
Can someone advise on what causes this problem
End associated Adobe all processes as the notifier creative cloud, CoreSync, Armsvc, AAMUpdater, AAMUpdate, Acrotray... etc from the Task Manager.
Then try to update again and check.
Always the same, let me know
-
Laptop from my dad recently started showing "configuration updates 3/3" followed back changes not configured message. It is on a continuous while loop that will sometimes allow windows Vista Home Premium to start. I checked the history of update and the first failure is KB2296011 which shows the error code 800F0816. Currently, I have his laptop but cannot access the internet because it does not connect to the internet via my network (do not have the knowledge necessary for to be difficulty)
Can someone help me solve this recurring problem. If necessary I will be able to access the internet on the laptop question but would like to know a solution offline if possibel. I don't want to pay Microsoft Help for the answer. I'm not very literate pc so a simple solution would be better.
You don't have to pay "Microsoft Help" for a response from the update that you have posted, KB2296011, is a Security update.
Of MS10-081: vulnerability in the Windows common controls library could allow remote code execution (KB2296011)Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
800F0816 - express package has not been completely downloaded. The status of the operation was recorded while the package is downloaded. An express package is a package that you are installing by using Windows Update. With these packages, only the files needed for that specific computer are downloaded and installed (unlike when all is downloaded to a computer).
For a 'solution offline' you can try to manually download each update to the computer you are currently using and then transfer to the portable touched with a USB key.
Then see if they install correctly. Given that we do not know all the edits concerned... open Windows Update in Control Panel, and then click View update history link to see updates try to install.
Note that the KB numbers are updated and post them in this thread or,
go to the Microsoft Download Center, enter the KB numbers in the field to Search all Download Center , click the magnifying glass to search and download for Vista updates that correspond to the architecture of the system. (The architecture of the system is displayed when you open System in Control Panel and look at the side of System: type.)Save updates. When the downloads have finished, close the browser and all other open programs and install them one at a time. Suggest that each time you are prompted to restart.
You can configure the phone assigned to the clean boot. Then see if the connection is restored, the updates can be downloaded and installed-
How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7Expert MowGreen Windows IT Pro - consumer safety
-
Cannot install windows update kb969947 error code 800F0816
Cannot install windows update kb969947 (for vista) everytime I try after that restart the computer should go back to a previous restore point to operate
error code 800F0816
See the section "How to get help" of http://support.microsoft.com/kb/969947
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Or you can...
Launch a collateral request for assistance free Windows Update:
https://support.Microsoft.com/OAS/default.aspx?Gprid=6527Consumer Security Support homepage
https://consumersecuritysupport.Microsoft.com/For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Error code 800F0816 when you try to install the updates
Vista Home Premium Service Pack 2, 64-bit operating system. Downloaded and installed the latest updates of security, but 6 of them have failed to install which gives error code 800F0816. (specifically KB978338, 980232, 979683, 981332, 905866 and 978601). Unable to find much information about this error code at all. Can someone point me in the right direction please? Thank you JOCK McSQUIGGLE
Thanks for the pointers, but none of the Web pages on the links provided, mentions this error code, which I find strange it seems that the problem is caused by the presence of defined Windows Firewall on 'on' when you download updates. Turning the firewall Windows on a 'stop' in the control panel allows downloads to install correctly. Hope that other users may find this useful. JOCK McSQUIGGLE
-
Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!
See the section "How to get help", for example, http://support.microsoft.com/kb/927978
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update
Hey lasdj,
Thanks for posting in the Microsoft answers site!
If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.
To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.
Therefore, remove the compression of the DATA directory and run together to the top again.
Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.
See the links below for more details:
Windows Update error 6d9e
http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9EInstall SQL Server 2005 and 2008 failures (compressed DATA directory)
http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspxI hope this helps!
Gokul T - Microsoft Support -
I always install the update to my Windows vista through the automatic update system, but recently I encounters an error code 52D when updated security installed for mircosoft work 8 (KB973636). Please help someone... seem micrsoft don have send to asked but rather as a forum here... Please... wat to do...
Steve,
You have Microsoft Works 8 installed and you use it? If this isn't a program you are using or you thought it had been uninstalled and then run The Windows Installer Cleanup utility and see if you are able to completely remove the work. This would then cause the update will not be presented. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Update continues to not give me an error code "0000646 Windows update encountered an unknown error.
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Error code 800706BA 13 times KB970653, 973768, 958869, 954430, 974291 updates, etc., and the error code 40010004 for updated "Explorer 8 for vista 64. My Windows updates indicates 'NO updates to UPDATE REQUIRED' even though these updates failed. Where I can download them and how? Thank you
Hello
Error 800706ba Windows Update
http://www.instantvista.com/800706ba.htmlControl Panel - Windows Updates - click right on and HIDE
To download manually:
Download Center - mount the KBxxxxxx.
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=enThen run this:
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
If necessary, you can get free reports of incidents.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Error code 800F0816 when you try to install KB2507938 and following
When you install KB2507938 and others today on my Vista SP2 32-bit on Acer Aspire 7735 I couldn't start the laptop over. I needed to return to the configuration of the system later by the Windows tools. In the update log, I see the error code 800F0816 for the following updates:
KB2507938
KB2533623
KB905866
KB2555917
KB2532531
Any ideas why it's a failure? Should I try to stop the Windows Firewall, and then install and start the firewall up later? Any help appreciated.
Hi Nora Marx,.
Method 1
This can also happen if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.
For more information please visit the link below.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2
Step 1: once you make SFC scan, then I suggest to clean starts and then download and install the updates.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note:
follow step 7 of section of boot KB929135 to the computer in normal mode.Step 2: Update security for Windows Vista (KB2507938)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26733Update for Windows Vista (KB2533623)
http://www.Microsoft.com/download/en/details.aspx?ID=26757Update for Windows Mail Junk e-mail filter [July 2011] (KB905866)
http://www.Microsoft.com/download/en/details.aspx?ID=1207Update security for Windows Vista (KB2555917)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26752Update security for Windows Vista (KB2532531)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26749Method 3
If the steps above fail, I suggest you to re - enable and disable the Windows Firewall.Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off -
The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.
Hi Sarma_RN,
1. When you receive the error message?
2. update you are trying to install?
3. When was the last time you were able to install updates?
If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.
These errors can occur caused by one of the following problems:
- Applications or processes that interfere with Internet communications
- Problems on your computer
- Strong Internet activity
- Recoverable database errors
See the Microsoft article and try the steps mentioned below.
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows Update error code 80072EE2. Update Windows Journal shows he's looking for a proxy in spite that the intenet access is direct. How can I find out Windows Update that I don't use any proxy? Proxycfg would probably help, but there are more with Windows 7.
Thanks to anyone who can help!
French Old Timer,
In addition to the information requested by PA Bear, take a look at this article and let us know if it helps.You may encounter temporary connection related errors
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I can't download anything I get error code 80072efe window update dt000
why I can not down load anything keep getting error code 80072efe window update dt000 can you tell me how to solve this problem, so I can down load updates
Ensure that there is no hidden malware that causes the connection to the update servers is abandoned.
How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?If no hidden malware has been detected, it is the first time that this error updated?
If the answer is Yes, then try reset components Windows Updates - How to reset the Windows Update components?
Download and save the Fixit on the web page above. Once the download is complete, close all open programs and browsers.
Now run MicrosoftFixit50202.msi and choose it is the default mode.
When he has finished to see if running Windows Update can search, detect, download and install the updates.If no joy, run the Fixit once more and choose it's aggressive mode.
Restart once it has finished running and see if the system can update now.If the system can always refresh not, then please copy and paste the last lines of 50 or more WindowsUpdate.log in your response - How to read the Windowsupdate.log file
Maybe you are looking for
-
Progress bar get about 60% and stuck
Hello I had difficulties with the last update of El Capitan - my imac will not re-start and could get stuck on the spinning wheel. I could turn it off with the power switch and turn it back on w/out the update and it works great except for chrome. To
-
Lost the function FN + F5 on Satellite Pro L10
I lost my function key Fn + F5, is possible to restore without resorting to all lose using the recovery disk?
-
I have download bios update the bios-190win-intel for Satllite M40 - 185 AR is the zip file I extracted this file on the desktopand when I try to install it by double clicking itme gives error Failed LoadBiosImage What could be the problem please tel
-
UPGRADE OF RAM AND USE EXPRESS CARD TO GET USB3
Hello I have dv6470ec with the standard RAM below. I can increase my memory to 4 GB. For example this RAM I found the info on your web site about max. Up to 2 GB of RAM, but I'm not shure if is a housing or the set. I also want to ask if posible use
-
My MacBook Pro screen is deformed, then restarts
After that 30 seconds, the screen become distorted my Mac automatically restarts. He comes to the Apple with the loading bar but then once more the screen begins to play up. Join pictures of what looks like on the screen. Sometimes it allows me to co