Error code when you try to synchronize MP and Wondows Media

Similar Questions

• 80070641 error code when you try to install KB2596871 and KB2598041?

  Can someone tell me how to fix the error Code 80070641?  I tried to install KB2596871 and KB2598041 several times but without success.  Also KB2656386, that some upward with the error Code 641.

  Hello

   
  Note: Microsoft abuse may become corrupted and may cause problems.
   
  Method1: Check the updates have been installed, delete them, reinstall them using the clean boot and see if that helps.
  
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
   
  Reference:
   
  Remove an update: http://windows.microsoft.com/en-US/windows7/Remove-an-update 
   
  Download here: http://www.microsoft.com/download/en/default.aspx
   
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
   
  Method 2:
  
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
   
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756/

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• Unable to get Windows Mail to send or receive. Get this message error code when you try to send: account: "Windows Mail".

  original title: Windows Mail

  Unable to get windows mail to send or receive.  Get this message error code when you try to send:

  Account: 'Windows Mail', server: 'pop.emailsrvr.com', Protocol: POP3, server response: '.', Port: 110, secure (SSL): no, error number: 0x800CCC18
  0x800cc0E error code received when you configure the ACCT.     POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.
  To find these server addresses, took some time to locate.  After locating and entering, using authentication
  sign username and password, he kept sign asking repeatedly.
  Any help on these questions would be appreciated.

  POP3 and SMTP servers are: pop3.email.msn.com.  SMTP.email.msn.com.

  To find these server addresses, took some time to locate.

  POP3/SMTP settings for an MSN e-mail account are on this page. That's more than three years, Hotmail includes the MSN e-mail accounts.

  Hotmail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page.

  Noel

• get 80071AA7 error code when you try to install windows vista sp1

  get 80071AA7 error code when you try to install windows vista sp1

  80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
  The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

  (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
  How to perform a repair for Vista Installation

  All personal data will be kept. All updates applied previously will need to be reinstalled.

  (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

  3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

• 64 c the error code when you try to install windows update kb2505591

  Why do I 64 c error code when you try to install windows update kb2505591

  Hello

  The kb2505591 is for the download of Bing Bar 7.0.

  You can try the methods provided below to solve the problem and then try to download the update for Windows.

  Method 1:

  I suggest to reset the Windows Update components and check if that helps resolve the issue.

  http://support.Microsoft.com/kb/971058

   

  Method 2:

  Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  If the methods above do not help then try to download Big bar 7.0 maually starting from the link provided below and check if the problem persists.

  http://support.Microsoft.com/kb/2505591

• 80070490 error code when you try to install kb967723, kb970430, kb972145 I Norton is turned off, the firewall is disabled

  80070490 error code when you try to install kb967723, kb970430, kb972145 I Norton is turned off, firewall is disabled, I tried an update installation but only have a update disc and it turns this function when I try to reinstall vista full... I don't know what to do know... any ideas?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• 80070652 error code when you try to upgrade to windows 10 Windows 7.

  * Original title: windows update error code

  80070652 error code when you try to upgrade to windows 10 Windows 7

  0 x 80070652

  ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress

  If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

  You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

  Connect to a power supply, if your computer is a portable computer.

  Disable your anti-virus software so that the upgrade.

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• Get the 8024401c error code when you try to update.

  Get the 8024401c error code when you try to update. Tried various fixes - neither works. The message also says that I have installed no update, i.e. no history of update that is false. Any ideas.

  Concerning
   
  Original title: run Windows 8

  Solved the problem. Changed the configuration of updates of ' install updates automatically (recommended) to "check and download (do not install). Updates are now being downloaded and my choice to install.

  Thanks for your help, Jose Antonio, I learned how to scan my computer now!
  Regards Gary

• Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

  Receive an A12E1 error Code when you try to update Photoshop CC.  Running an iMac with 10.7.5.  My OS drive is formatted as Mac OS extended (journaled).  Any suggestions?

  As I said, I'm Windows as well as a few links saved, I have ZERO idea what to do with a Mac

  Link for download & install and installation & activation problems can help

  -Cat http://www.adobe.com/support/download-install/supportinfo/

• I get this error code when I try to uninstall it and install Adobe Reader. error1324

  I get this error code when I try to uninstall it and install Adobe Reader. error1324

  See if the Fixit program mentioned in this link he can solve it for you.  It will fix bad enties in your registry for "Shell folders".

  You receive an "Error 1606" error message when you try to install or remove a program from Microsoft
  http://support.Microsoft.com/kb/886549

  Try the Forum of Adobe Reader and the 1324 error type in their search box.
  http://forums.Adobe.com/community/adobe_reader_forums

  http://helpx.Adobe.com/Acrobat/KB/quick-fix-install-download-reader.html

• 00643 error code when you try to install important update __WHy?

  Several times the same error code - tried this only started recently - what am I doing wrong? Can someone help me please

  Operating system? Update in question?

  1 Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  2. Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  3. you receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  4. you receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services
  http://support.Microsoft.com/kb/903772

  and finally -.

  5. When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  and/or

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• 800b0100 error code when you try to install Windows updates KB974145 and KB978251

  Greetings and salutations:

  Any help would be appreciated.

  I tried to install these 'important' updates several times with the same result - updates failed, error 800b0100 code. I downloaded and installed the KB974821 tool - tells me it installed - same problem. (I don't know if I'm supposed to do something else with KB974821 - I have to "run" or just "installed" it enough?) Instructions could certainly be clearer)

  I tried to download and install the updates manually - without success - I get various error messages, like "does not apply to your system" or "for a different hardware platform.

  I tried this with my firewall/antivirus close as well - using Trend Micro - and still no luck.

  Thoughts, comments, suggestions, help? Very much appreciated. Thank you.

  
  

  BTW, I'm running VHP 64 with Service Pack 2 installed. Nothing should be this complicated or frustrating.

  Additional information:

  In another forum, where I posted this inquiry (I was told is the right place to post it here) I was advised on how to get the results of the KB947821 tool that I ran.  (Why this information was not given instructions on how to use the tool is beyond me). Here are the results of the analysis, apparently:

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking
  (f) amd64_bthmtpenum.inf_31bf3856ad364e35_0.0.0.0_none_7ff053f99479855b CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.bthmtpenum presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdfs.inf_31bf3856ad364e35_0.0.0.0_none_a5e566b2d3236f6d CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdfs presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtp.inf_31bf3856ad364e35_0.0.0.0_none_9f92d6d487384aad CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtp presence of registry package failed, possibly an orphaned package on package watchlist
  (f) amd64_wpdmtphw.inf_31bf3856ad364e35_0.0.0.0_none_78371ba92ff2a242 CBS Watchlist component missing 0 x 80070002 Microsoft-Windows-WPD7IP-SKU-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 7.0.6002.18112.wpdmtphw presence of registry package failed, possibly an orphaned package on package watchlist

  Checking packages

  Control components store

  Summary:
  Seconds executed: 1695
  Found 4 errors
  CBS Watchlist component lack Total count: 4
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  So apparently the errors were detected. What they mean and how to fix them? Thank you!

  Hello

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 800b0100 error code when you try to install KB2449742

  Tried to install the KB2449742 update every day since that he has published since April 19, but get error 800b0100 code every time Singel - tried with and without virus running program - nothing works HELP!

  Hello

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.