Error: "could not load the report" while trying to print an invoice with Crystal Reports

Similar Questions

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0

• Live Preview error: could not load the page Live Development

  When I click on live preview.  Cromemo open without images to http://127.0.0.1:49836/Edge%20Code%20Assets/Start/index.html

  Can I get the Preview Live error message: could not load the page Live Development

  What should I try to fix this.

  Dean

  It is now defective due to a change in API with Chrome v34. We are currently working on a change which will be published shortly. She will work in Chrome v33, but I don't know if there's a way to go back.

  FYI, edge Code is based on media (http://brackets.io) that has the fix for this problem, so you can also try with strips.

  Randy

• SOUL error: could not load the dll to return of the ICC: BCC8_AE_16Bit.dll

  Whenever one of my colleagues opens the Adobe Media Encoder, it loads the start screen for the SOUL, but then we get the following:

  Could not load the dll BCC Render: BCC8_AE_16Bit.dll (see image)

  

  We have already tried to uninstall and reinstall, but without a bit of luck.

  It's the CS6 Cloud creator on Windows 7 x 64 machine.

  SOUL works very well if you uninstall the plug-ins from Boris?

• SE error message: user account Service failed to connect. Windows could not load user data while trying to connect to windows

  Original title: I can't access my user account

  I went to to connect my user on my laptop and a message popped up saying the service user account Service failed to connect.

  Windows could not load user data.

  Someone please help!

  Hi tozza92,

  1. you remember to make changes to the computer before this problem?

  2. are you able to connect by using a different account?

  You can consult the following Microsoft KB article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to load the query in Crystal Designer: error "Could not load the Query builder compenent."

  Hi all
  I am using Crystal report 10 which was an upgrade of crystal 7 and 8.5
  I can open the crystal report and can do everything but I could not display the SQL query option
  It gives me an error message
  "Failed to load the Query builder compenent."
  I also reinstalled the application twice as a sysadmin even then I get this message
  Please, can someone suggest me what should I do?

  Contact technical support for Crystal Reports or watch in their forums. This is not a product of MS and is not related to the installation, upgrade and activation of Windows XP.

• Error "Could not load the Shockwave Flash" not resolved the common fix.

  I use Google Chrome as my browser and I get the error message "Cannot load the Shockwave Flash". I Googled it and followed the common fix, but it does not solve everything. If I disable the plugin then he invites me to install Flash Player when I discover videos and if I try to install Flash Player it tells me that I have already installed, but it is disabled and to re - activate. I made just about everything I can think of to do, please help?

  You can not:

  -Download

  -install

  -repair

  -updated

  Flash Player for Chrome from here. Chrome uses a version called PepperFlash owner. It is edited by Google before they stir him and Adobe has no downloads for it.

  You can try the following:

  1. chrome output, make sure that it does not run

  2 using the Windows explore will on behalf of C:\users\[user] \AppData\local\Google\Chrome\User data\Pepperflash

  3. delete the files you see here

  4 restart chrome.

  Notes:

  [user name] is the name of your connection.

  To access the AppData folder, you must "Show the hidden files and folders" in your Folder Options.

  If these steps fail, the ONLY way to fix is to uninstall and reinstall Chrome.

• Error: Could not load the multiboot modules: already exists

  I tried searching for this error and can find no other instance of this error online.

  When my computer starts and ESXi startup, I get the pink screen with the message: "don't load the multiboot modules: already exists.

  It started after installing a hard drive used in my lap and make updates in shape and ready to be used as another data store.

  I do not give anything to the new data store or use the new disk, the boot drive by clicking.

  I stop my Tower and removed the faulty disk and now I get this error message when I boot it.

  I have a feeling that it should be easily fixed, I don't know where to start because I'm still new to Vmware.

  I would like to know if there is any information that you need help in troubleshooting.

  VMware ESXi 5.5.0

  Processor 8-core AMD FX-8350

  16 GB memory

  Jon

  It looks like the boot image is damaged.  You can always reinstall ESXi and leave the data intact store.

• Error "Could not load the page" when you click the backup and Restore Center

  Original title: Save reestore center problems

  OK so I need to restore my pc and when I click on the backup center and restoration he always says "Unable to load the page"... . How can I fix

  try to reinstall the backup files if you have a windows disk to use to reinstall or if your computer has windows factory preintalled windows, you could reinstall striehgt from your computer

• Vista symptom-was unable to connect-event log unav... - error-could not load the dll of the firewall intall cd

  Hello, once again!-the permanent problem's for a while when the system starts at length made a chkdsc solve problem of security and started a journal rewrote the security set of default computer files (it happened before I could do anything and I have prior devulcanization, but is not this time), then narrowed office and failure to connect to a service windows appeared - are looking for Event Viewer , he is too error-unavailable check running - and the same.etc wall of fire etc. I ran the chkdsk again and I tried clean boot, reinstall os from cd to find any DLLs cannot be read, all with no success. The system configuration was last place, I was in (memory and forgotten the reason) but placed in this area has been the recommendation at the time to fix something and rebooted to undo changes and that's where newspapers changed. My user profile is also something questionable-. Fixed UAC from the Office to the previous, but the sidebar does not work. I'm sure there is a way to get back to that, but I can not see where or how--to help. (this just before a full backup has been in do so) sys restore is never out anything here. I don't have a picture from earlier and that you would like to know the number of license/registration even if other images uploaded to a new os and numbers is a question they compete somehow.eg P2V on a different HARD drive. Thank you. Oh... a program compatible for xp had red warnings about its pilots and it was loaded and uninstalled just before all this. (MSI tv tuner USB pvr)

  Hi 1 year perateth.

  In order to solve the problem, I would suggest that you backup the data present on the system then format the hard drive and reinstall Windows Vista.

  Note: In a new installation, existing data on your computer are deleted. These data include data personal, settings, information about the hardware and software drivers. After installing the operating system, you must also reinstall all programs. Make sure that you back up data personal disks or other external storage devices before you perform a new installation.

  You can check the following items to install Windows Vista.

  Installation and reinstallation of Windows Vista

  Formatting disks and drives

  Hope this information is useful.

• 2519 LabVIEW error could not load the component of PDM file

  Hello

  I have LabVIEW 2014 for Linux and have successfully installed on OpenSUSE 13.1 without any problem.

  The problem I see is with PDM, I placed down and "Open TDMS" followed by "TDMS" close it provided my path to my TMP folder and I see the following error message:

  

  I searched NI.com and google, and what I keep finding is the problem with cRIO. I use a desktop version of Linux as mentioned above.

  Any help or advice would be greatly appreciated.

  Thank you very much

  Kevin

  This error means that either your PDM installed library (libtdms.so) does not exist or corrupted/out-of-day. On the linux desktop, it should be in/usr/local/natinst/lib (lib64).

  You can have a check on your linux desktop. If there are rerun your installation and make sure that you type 'Yes' when asked to install PDM.

• I can't reinstall firefox, I get the error 'Could not load profile' and not a solution I found works. / Appdata/roaming/mozilla folder is not accessible.

  I'm on Win7 64 bit. Initially, I uninstalled because a program has changed my page of the new tab to something unwanted and I literally had no way to change this back. Now, every time I reinstall, I get the error "cannot load the profile, it may be missing or unreachable", and I can't create a new profile. Whenever I try to any method of opening the profile editor, I get the error 'Could not load profile' then too. I can't access the folder in/appdata/roaming/mozilla at all. It is said it is accessable and access is denied, and tries to remove it tells me I have not permission (even if I'm the admin). No other difficulty I saw worked. Can someone help, please?

  I have done a virus scan, cleaned up one piece of adware, rebooted, and it worked all of a sudden. I don't know what exactly caused to start working, but he did, so I consider this issue closed.

• Description: Could not load the plug-in module. (GUID = {56F9312C-C989-4E04-8C23-299DEE3A36F5}) (Error code = 0 x 80042019)

  MY LAPTOP STOPPED ABRUPTLY AND APPEARED A BLUE SCREEN AFTER I HAVE INSERT USB NETCONNECT. IT IS THE FIRST TIME HE TOUCHED WITH THIS ERROR. I DON'T KNOW WHAT AND WHY, ON THIS SUBJECT. PLEASE HELP ME TO GET RID OF HER... THANQ

  Hello
   
  1. using a Sony Vaio laptop?
  2. don't you get also 'VzCdbSvc' and level: 'error '?
   
  If the answer is Yes to these questions, you can do the following.
   
  vzcdbsvc.exe is a process belonging to VAIO Entertainment studio. 'S called it VAIO Entertainment Database Service belonging to VAIO Entertainment studio.
   
  DESC. : Could not load the plug-in module.
   
  Step 1:
   
  a. Click Start > run
  b. Type "msconfig" and press enter
  c. Selective startup > Startup tab
  d. UNCHECK this process > apply > OK
   
  Step 2:
   
  Change the startup type of the Service:
   
  a. Click Start > run >
  b. Type "services.msc".
  c. right-click on VzCdbSvc. > properties > change manual start > apply > OK.
  d. right-click on the connection manager automatic remote access > manual change > OK.
  I don't know if this will solve your problem or not, but it is worth trying.
   
  Aziz Nadeem - Microsoft Support

• Get the error: "could not load wmi.dll.

  I am trying to install Cyberlink 4. I get the error: "Could not load wmi.dll" before Setup is ready.

  Even if it's in the System 32 folder.

  I have a stable replacement for it, but I can't delete and replace it with obviously various reasons, even if many forums tell me to pretend like it was easy. I tried a lot of things now and with a lot of attention so not to spoil my OS.

  I have Vista 32 Sp 2. I'm running out of ideas, in fact I ran.

  Help gratefully received.

  I solved this problem with a useful Gnome from Cyberlink.

  Here is the link that made me to erase my previous bad uninstall the previous version of Cyberlink you Cam:

  FTP://154: * email address is removed for life private ***/new/CLCleaner-YouCam-All.zip

  When prompted, save the file to the desktop of the computer. After the download is complete, run the file and restart your computer.

  Congratulations to all.