Error during report generation

Similar Questions

• error 7, report generation tools do not work after construction.

  Hello guys:

  only one problem. Help!

  I tried to build my programs with the application designer, application exe builded unluckly has no work well as before, I checked some similar post of this forum and added that NIReprot.llb in my project and rebuild, the problem is always held, my program add some text, tables and graphics in a word template with this report generation tools , but it always gives error 7 and ' NI_Word.lvclass: new report subVI.vi--> NI_report.lvclass:New Report.vi--> Report.vi new Creat->...' error information.

  is there anyone can give me some clues on this annoying problem.

  Thank you very much!!!

  zybear,

  Suggest you take the simple test vi and start adding all the features of your original application.  It accumulates in the stages and test at each stage.  I hope this helps you identify the problem.

• Error during the generation of the report files

  Hi all

  I'm level EBS 12.1.1 to 12.1.3 on RHEL 64-bit 5.7. Database is 11.1.0.7.

  While applying patch 9239090 I am getting following error:

  Oracle reports objects have not generated successfully:

  the AP reports / us APXINLST.rdf

  the AP reports / us APXINVTC.rdf

  the AP reports / us APXINDUP.rdf

  the AP reports / us APXINVPH.rdf

  the AP reports / us APXINROH.rdf

  reports of FA / us FAS421.rdf

  reports of FA / us FAS430.rdf

  reports of FA / us FAS410.rdf

  reports of FA / us FAS403.rdf

  reports of FA / us FAS441.rdf

  reports of FA / us FAS401.rdf

  .

  .

  .

  It is quite a long list. What is the solution to this?

  Kind regards

  Vinod

  The problem has been resolved. The problem was xming (display window) was not open.

  -Vinod

• Urgent: Error during the generation of the big report

  I'm getting below error when I run the report for long term. The report below will only run for one or two days. Please let me know how to fix this error. It's very urgent.

  

  while I'm the same report run for 2 days (30 records) it's execution and generate output. But when running for 8 days (200 folders) to show that the error

  based on that, you have to re - check the xml data and the logic model (exclude certain logics complex and step by step, recheck and add logic)

  looks like some data to lead to error can be by division or a molding to the number string or can be some special symbols

• Error during the generation of session bean

  Hi all
  
  EPCO: 12.1.1.1.0
  
  I created the entities JPA through the Assistant of "JPA entities from Tables" for employees and departments.
  Now, I want to create the bean in session using the Wizard "Session Bean of JPA entities.
  I give it a name and select all of the available features and click on "Finish". Then I got the following error:

  Error running the session bean generation task.

  In the console error log, I see the following:

  org.eclipse.core.commands.ExecutionException: 
       at oracle.eclipse.tools.webtier.ui.wizards.existing.EJBProjectFromExistingDataModelOperation.execute(EJBProjectFromExistingDataModelOperation.java:67)
       at oracle.eclipse.tools.adf.view.ui.internal.wizard.datamodel.NewSessionBeanFromEntitiesWizard.addEJBFacetOperation(NewSessionBeanFromEntitiesWizard.java:249)
       at oracle.eclipse.tools.adf.view.ui.internal.wizard.datamodel.NewSessionBeanFromEntitiesWizard.createNewServiceDefnAndGenBeans(NewSessionBeanFromEntitiesWizard.java:219)
       at oracle.eclipse.tools.adf.view.ui.internal.wizard.datamodel.NewSessionBeanFromEntitiesWizard.doFinish(NewSessionBeanFromEntitiesWizard.java:169)
       at oracle.eclipse.tools.adf.view.ui.internal.wizard.datamodel.NewSessionBeanFromEntitiesWizard.access$0(NewSessionBeanFromEntitiesWizard.java:160)
       at oracle.eclipse.tools.adf.view.ui.internal.wizard.datamodel.NewSessionBeanFromEntitiesWizard$1.run(NewSessionBeanFromEntitiesWizard.java:133)
       at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
  Caused by: org.eclipse.core.runtime.CoreException: 
       at oracle.eclipse.tools.webtier.ui.wizards.existing.EJBProjectConverter.convert(EJBProjectConverter.java:281)
       at oracle.eclipse.tools.webtier.ui.wizards.existing.EJBProjectFromExistingDataModelOperation.execute(EJBProjectFromExistingDataModelOperation.java:61)
       ... 6 more
  Caused by: java.lang.NullPointerException
       at org.eclipse.jst.j2ee.project.facet.J2EEModuleFacetInstallDataModelProvider.hasValidRuntime(J2EEModuleFacetInstallDataModelProvider.java:213)
       at org.eclipse.jst.j2ee.project.facet.J2EEModuleFacetInstallDataModelProvider.propertySet(J2EEModuleFacetInstallDataModelProvider.java:162)
       at org.eclipse.jst.j2ee.internal.ejb.project.operations.EjbFacetInstallDataModelProvider.propertySet(EjbFacetInstallDataModelProvider.java:137)
       at org.eclipse.wst.common.frameworks.internal.datamodel.DataModelImpl.internalSetProperty(DataModelImpl.java:182)
       at org.eclipse.wst.common.frameworks.internal.datamodel.DataModelImpl.setProperty(DataModelImpl.java:172)
       at org.eclipse.wst.common.frameworks.internal.datamodel.DataModelImpl.setStringProperty(DataModelImpl.java:201)
       at oracle.eclipse.tools.webtier.ui.wizards.existing.EJBProjectConverter.convert(EJBProjectConverter.java:126)
       at oracle.eclipse.tools.webtier.ui.wizards.existing.EJBProjectConverter.convert(EJBProjectConverter.java:273)
       ... 7 more

  Anyone has any idea what happened and how can I fix?
  
  Thank you in advance.
  
  Filip Huysmans.

  To work around this problem, follow these steps:
  -On the model JPA project
  RT - click on, and then select Properties
  -Select project facets
  -Unlock and deselect the facet utility Module
  -Select the facet of the EJB Module and Oracle WebLogic EJB Extensions

  Your project must be ready to perform the given operation.

• Errors during the generation of the simple PDA mobile ADF application

  Dear,
  
  I created a very simple table used and tried to generate the ADF mobile PDA with jheadstart
  but I got these errors of generations
  
  [EmployeesTable.jspx, default/item/table/tableTextInput.vm] No model corresponding to templateidentifier: help TABLE_ITEM_FOOTER for VACUUM model
  [EmployeesTable.jspx, default/item/table/tableTextInput.vm] No model corresponding to templateidentifier: help TABLE_ITEM_FOOTER for VACUUM model
  [EmployeesTable.jspx, default/item/table/tableTextInput.vm] No model corresponding to templateidentifier: help TABLE_ITEM_FOOTER for VACUUM model
  [EmployeesTable.jspx, default/item/table/tableTextInput.vm] No model corresponding to templateidentifier: help TABLE_ITEM_FOOTER for VACUUM model
  [EmployeesTable.jspx, default/item/table/tableTextInput.vm] No model corresponding to templateidentifier: help TABLE_ITEM_FOOTER for VACUUM model
  [EmployeesTable.jspx, default/item/table/tableDateField.vm] No model corresponding to templateidentifier: help TABLE_ITEM_FOOTER for VACUUM model
  [EmployeesTable.jspx, default/item/table/tableDropDownList.vm, nesting level: 5] no match for the templateidentifier model: rescue TABLE_ITEM_FOOTER for VACUUM model
  [EmployeesTable.jspx, default/item/table/tableTextInput.vm] No model corresponding to templateidentifier: help TABLE_ITEM_FOOTER for VACUUM model
  
  and so on...
  
  
  Is it a failed model or what?
  Note that, when I generate this simple app as the common ADF faces it works very well.
  
  What is missing? Help, please...
  
  Published by: samy omar on December 8, 2009 02:11

  Saami

  To resolve this problem, you must add the missing entry in the PDATemplateBindings.jtp file:

  TABLE_ITEM_FOOTER=default/item/table/tableItemFooter.VM

  If you get similar errors on other template names, and then copy it on this model and the value of defaultTemplateBindings.jtp to PDATemplateBindings.jtp name

  Steven Davelaar,
  JHeadstart team.

• Error during the generation of shared library for OSX

  Hello

  I am trying to build a shared library (.framework) using LabVIEW 2011 as Mac.

  My Version of OSX is 10.7.3.

  When I run the build process, TI allways give up showing the error message:

  There is 1 error in DLL - C compile Source File.vi Possible reason (s): you must have the Apple Developer tools installed to build a shared library. Install the Apple Developer tools and attempts to reconstruct the shared library.

  I don't know what developer tool is missing or if there is another problem with my environment.

  Thank you

  Gschwert

  Hi Gschwert,

  in the meantime, I received a response from our developers in Austin.

  Developer Tools Apple which refers to should be X-Code.

  They work with X-Code Version 3.0 and have no problem. They will try to work with your versions (4.2 and 4.3) too and take a look, if there is something special to look for.

  Have you tried using X-Code 3.0? Then you get the same problems?

  Good day

• 200560 error during the generation of the two signals of AO

  Hello

  I am trying to send out two signals and I get error 200560 to "wait until done" vi.

  I was wondering if there is no solution for this problem.

  BTW, the vi is attached.

  Thank you

  Pooya

  You have your clock set to continuous samples. I don't know if you can use 'Wait until what' If you the task will never happen. Set your click on over and see what happens.

• ERROR during the generation of Proxy for BWS and Service Web BWSUtil files

  I'm trying to configure web service for BlackBery 10 infrastructure.

  I followed the steps in http://docs.blackberry.com/en/admin/deliverables/49270/dme1348595223038.jsp

  When I run the command as shown in the doc, I got the below error. Let me know, what went wrong. Thank you.

  ERROR:

  WSDLToJava error: org.apache.cxf.wsdl11.WSDLRuntimeException: unable to create the wsdl definition of: https://bes101.blrresearch.com:38443 / business/admin/ws? wsdl
  Caused by: WSDLException: faultCode = PARSER_ERROR: the analysis of problem 'https://bes101.blrresearch.com:38443 / business/admin/ws? wsdl ".: javax.net.ssl.SSLHandshakeE"
  Xception: sun.security.validator.ValidatorException: building way PKIX failed:
  sun.security.provider.certpath.SunCertPathBuilderException: could not find valid
  path to certification for target asked

  Thank you

  It was instead of update of wsdl2java.bat, I've updated wadl2Java.bat.

• Error during CSR generation

  I'm trying to generate the CSR of ISE admin headnode. I see this error:

  

  What is the workaround?

  I did the primary had the same mistake, restarted the primary ISE seems to have solved the problem.

• Error during the generation of Dimension (the Formuals aren't loading)

  Hello
  I have do dimension iin building there a formula in there. Everything is getting up loaded except formulas.
  
  In the text file, this is the combination that tries to make the Sun build. Can you please correct me if there are all wrong in this formula.
  
  Sales & Marketing, sales L + T X, = "Dirty"->"Department expenditure";
  Sales & Marketing, Marketing, + T X = 'Marketing '->' Department spends ";
  
  Below the error is generated after the Sun build:
  
  !! ERROR: FORMULA NO CHARGES! = Sales - > 35 - Total for the associated spending Department;
  !! ERROR: FORMULA NO CHARGES! = Marketing - > 35 - Total for the associated spending Department;
  
  Appreciate in advance for your help.
  
  Kind regards
  UB.

  Measures,Bozo,\"Opening Inventory\" + \"Payroll\" ;
  

  Phew, we find: http://www.network54.com/Forum/58296/message/1098316787/Escape+Characters

  \t (Horizontal) Tab
  \v Vertical Tab
  \n New Line Feed
  \r Carriage Return
  \f Form Feed
  \b Backspace
  \\ Back slash
  \' Single quote
  \" Double quote 
  

  Kind regards

  Cameron Lackpour

  Published by: CL 28 October 2009 13:11
  Arrgh, it's something to do with escaping the quotes (I think) in a csv file. When I load as a tab delimited, it works like a charm. I'll look into it later unless someone takes pity on us and answer the question before my lunch.

  Published by: CL 28 October 2009 13:17
  Yes, my revision 3 of this post. "Put it in a------" to get these quotes and don't forget to check allow editing of formula. But I finally got.

• Duplicate definition - error during the generation of project

  Hi eveybody,.

  I met a problem when I am developing. I copy the source from a computer code and put it in the new computer, build a new workspace and a new project, and then compile the code.

  It can pass all the verification code, but it built like this:

  Sorry to answer that for myself...

  I think it's because I add a few files such as *.rapc and * .debug. that is causing the problem.

  I remove and build well.

• Error during the generation of print documentatin HR 7

  Dear Sir.
  While generatig printouts, the following message appears: -.
  
  "Microsoft Word seems to not respond, you want to continue waiting for an answer?"
  then "the Macros in this project are disabled, please refer to the online help.
  then "Macro VBA registry version is incorrect, please re install printed documentation.
  
  Thank you.

  I discovered the reason why, macros have been disabled in my word

  Thank you.

• taskdef class not found during the generation of code from wsdl using Ant

  I'm getting a class not found error during the generation of the java code from the wsdl file.
  
  *******************
  CU dmwls (338) $ ant generate wsdl
  BuildFile: build.xml
  
  ++ BUILD FAILED ++
  ++ file:/ffdt01/resmgt/kul/build.xml:14: taskdef class weblogic.wsee.tools.anttasks.WsdlcTask can not be found ++
  
  Total time: 1 second
  CU dmwls (339) $ cat - n build.xml
  < default project 'all' = > 1
  2 < name = "bea.home property" value="/opt/bea/wls/8.1sp4" / > "
  "3 < name ="jdk.home property"value =" ${bea.home} / jdk142_05 "/ >
  "4 < name ="weblogic.home property"value =" ${bea.home} / weblogic81 "/ >
  5
  6 < path id = "weblogic.classpath" >
  "7 < fileset dir="${weblogic.home}/server/lib ">
  8 < include name = "*.jar" / >
  9 < / fileset >
  10 < / path >
  11
  12 < taskdef name = "wsdlc.
  13 classname = "weblogic.wsee.tools.anttasks.WsdlcTask"
  14 classpathref = "weblogic.classpath" / > "
  15
  16 < name target = "generate-to-wsdl" >
  17 < wsdlc
  18 srcWsdl="/ffdt01/resmgt/kul/ksr.wsdl.
  19 destJwsDir = ' / ffdt01/resmgt/kul.
  20 destImplDir = ' / ffdt01/resmgt/kul.
  21 classpathref = "${weblogic.classpath}" "
  22 classpath = "${weblogic.classpath}" "
  23 packageName = "examples.webservices.wsdlc" / > "
  24 < / target >
  25 < / project >
  *******************
  
  I checked this class in the use of weblogic.jar file unzip command but there is no class "WsdlcTask".
  
  Unzip weblogic.jar-l | grep WsdlcTask - does not result
  
  I am looking WsdlcTask class in all the jars under BEA_HOME directory using below command but not found in class WsdlcTask.
  
  CD $BEA_HOME
  To find. -*.jar name-exec unzip {}-l------. grep WsdlcTask - also returned no results
  
  
  Some required classes does not appear in my weblogic.jar/jar file or there is something wrong with my build.xml file?
  
  Help, please.
  
  Kuldeep

  Hi Kuldeep,

  WSDLC you use in WLS8.1 ehich is not correct... "weblogic.wsee.tools.anttasks.WsdlcTask" the above taskDef is present WLS9.x leave.

  Please use the next task for WLS8.1 (http://download-llnw.oracle.com/docs/cd/E11035_01/wls100/webserv_ref/anttasks.html#wp1075710)

  <>
  WSDL = "WSDLs/MyService.wsdl"
  destDir = "myService/implementation.
  packageName="example.ws2j.service"/ >

  Thank you
  Jay Sensharma
  http://jaysensharma.WordPress.com/webservices/ (WebLogic wonders are here)

  Published by: Jay SenSharma on February 16, 2010 13:30

• Report generation Exe error

  Hello

  I use LV 8.6.1 with report generation tool 1.13 and I'm having problems to make my exe built to work.  I try to open an excel template and fill it with new data.  I broke the vi downwards to open just excel - open the template and then fill out some data.  But at this point excel opens not at all.  And of course, everything works fine in the development environment.

  Error code:-2147352573

  Member not found in NI_ReportgenerationToolkit.lvlib:

  Excel_open_workbook.VI

  NI_Excel.lvclass: new reportsubvi.vi

  I read a few pages of help that says Add LVclass and \vi.lib\utility\NIreport.llb directories in project folder and add them to the always include section of the build.  But no luck so far.

  Aside: the machine I want to use it on a 8.6.1 full which does not have the extra excel functions available my developer.  Is it possible to install the DEV report generation tool in the full version?  Then I wouldn't need to build an exe file.

  UPDATE: I just tried the exe on another computer that has a suite of Developer installed and it worked fine.  So I guess I need to know what I need to add to the building to make it work.

  Make versions of Excel are the same?

  Microsfoft has improved the ActiveX interface for each version so that the old instance didn't connect.

  Tone