error in aix oracle 10 g 2 DB agent deployment
Hi allJust started to use Grid Control. I've got 10.2.0.5 Grid Control running on a windows xp test installation.
Works ok.
However trying to run a deployment of the MA in an aix (5.3) server running a 10.2.0.4 DB, I get an error that I can't understand.
Set up the SSH between the boxes and trying to deploy across the deployment > install agent > new installation all withdrew with the connection test section. However when running the prereq test it is a failure.
I'm running the installation with the oracle (not running root.sh script) user-defined. It fails with exit code 9 indicating that
"error: cannot open zipfile [/ patches/ADATMP_2009-09-18_10-49-36-AM/agentpush_appprereqs.jar] unzip: cannot find patches/ADATMP_2009-09-18_10-49-36-AM/agentpush_appprereqs.jar, /patches/ADATMP_2009-09-18_10-49-36-AM/agentpush_appprereqs.jar.zip, or patches/ADATMP_2009-09-18_10-49-36-AM/agentpush_appprereqs.jar.ZIP."
It seems trying to decompress this file agentpush_appprereqs.jar. Now, if I try to start the deployment with the root user it gets more but it will fail since im using root and Yes cannot run with this user (which I understand)
Looking at the directories on the aix server the file agentpush_appprereqs.jar exists - but there is no permission set. This makes me think that it is a permissions issue since the root is able to decompress this file.
Comparing the temporary directories that are created during deployment of the agent, I see that, install it with the root, is unpacking agentpush_appprereqs.jar there are more files in the temp directory has while in the oracle installation there are fewer files even if agentpush_appprereqs.jar exists. Hope it makes sense.
My question is bad where I put permissions? Why EM control Grid deploys the file with no permission?
My understanding is that I don't have sudo installed to allow the oracle user get for the root user, unless I wanted to run the root.sh script.
Tried to fix this for a day now. Any advice welcome.
O and the user has the appropriate permissions for the /patch dir oracle I try to install the agent too many files.
Hello
See the links for the solution below.
http://www.oraclemusings.com/?cat=2
http://www.oraclemusings.com/?p=87
I hope this helps.
Kind regards
Ludmilla amine
http://oracleracexpert.blogspot.com
[See the solution for ORA-19755 when starting the recovery/DB: http://oracleracexpert.blogspot.com/2009/09/ora-19755-could-not-open-change.html]
Click here to learn [how to move an OCR file in RAC. | http://oracleracexpert.blogspot.com/2009/09/how-to-move-or-replace-and-repair-ocr.html]
Tags: Enterprise Manager
Similar Questions
-
EMCA fails with the error "ORA-01034: ORACLE is not available.
Hello
10g R2 on AIX I have the following error:
And that's because all oracle processes are runing with:emca -config dbcontrol db -repos create ...................................................... ..................................................... Password for DBSNMP user: Invalid username/password. [ORA-01034: ORACLE not available]
ORACLE_HOME=/U00/Oracle/product/10.2.0/Db_1/
EMCA fails with the error "ORA-01034: ORACLE is not available" and "Name of user and password invalid." For DBSNMP user [ID 550484.1]
It is said:
Can I do the reverse and in the script of the emca, add "/" at the end of ORACLE_HOME=/u00/oracle/product/10.2.0/db_1+<moderator edit - removed MOS content>+
??
Thank you.
Edited by moderator - content removed from MOSHi user;
First of all please do not post details here, its against to oracle interoperability metalink, ID is sufficient for us. Secondly, yes you can, first to save $ORACLE_HOME/bin/emca script like
CP $ORACLE_HOME/bin/emca $ORACLE_HOME/bin/emca_org
to change the file number and test
Respect of
HELIOS -
Error in db oracle Linux log-in: ORA-01034, ORA-27101
Hello world
I got below error when log installed on Linux REDHAT 6.4 (11 g R2) oracle database.
[oracle@LOM-NEYTR-RHEL-NEW1 dbhome_1] $ sqlplus
SQL * more: Production version 11.2.0.1.0 Mon. Nov 16 15:29:08 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter the user name: dmadmin
Enter the password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
Process ID: 0
Session IDs: serial number 0: 0=====================================
is that someone has an idea about this. I tried to connect as sysdba and connected successfully, but
When I give the command "start", it gives below error.
[oracle@LOM-NEYTR-RHEL-NEW1 dbhome_1] $ sqlplus / as sysdba
SQL * more: Production version 11.2.0.1.0 Mon. Nov 16 15:26:49 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connect to an instance is idle.
SQL > startup
ORACLE instance started.
Total System Global Area 1068937216 bytes
Bytes of size 2220200 fixed
817893208 variable size bytes
243269632 of database buffers bytes
Redo buffers 5554176 bytes
Mounted database.
ORA-03113: end of file on communication channel
Process ID: 21048
Session ID: 16 serial number: 3
==================================================
Please help me on this.
Hello
1. thanks for sharing the alerts log. next time on neighbourhoods - when you receive error first source/watch is in the alert log
2 see the errors below
ORA-27072: IO file error
Linux-x86_64 error: 25: Inappropriate ioctl for device
ORA-19502: error on file '/home/oracle/app/oracle/product/11.2.0/dbhome_1/dbs/arch1_28_850998828.dbf of writing.
Is for example you didn't know that error if information I google for example IOCtl (http://www.iitk.ac.in/LDP/LDP/lkmpg/2.4/html/x856.html) his dirver / core program allows to interact to with the device (as the hard drive is peripheral)
Now oracle dbwr written to right something to when starting after the phase of mounting to the location above. Maybe more space to a tablespace.
3. the first thing you need to make sure there is a space / Home for example at startup
4. change (move all files to the different location) it's not good to hold sound/home/oracle which is General for all other users (staging of situation - home directory)
Update - your last exit
dev/map/vg_lomneytrrhelnew1-lv_home 201915336 190056092 1602452 100% / Home Its filled to 100%
It may be useful
-Pavan Kumar N
-
connection mysql and oracle ORA-28545: error diagnosed by Net8 when connecting to an agent
Hi all
I have Oracle 10.2.0.5 server and MySQL 5.3 on windows environment. all are 64-bit.
I want to connect to MySQL. I do the following
Configure Listner.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_2)
(= Extproc PROGRAM)
)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_2)
(SID_NAME = ORCL)
)
(SID_DESC =
(SID_NAME = mysql)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_2)
(PROGRAM = HSODBC)
(ENVS = LD_LIBRARY_PATH = C:\oracle\product\10.2.0\db_2\LIB)
)
)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.hct.org) (PORT = 1521))
)
Tnsnames.ora configuration
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradev.hct.org) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)
MySQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST= 10.153.103.5) (PORT = 1521))
(CONNECT_DATA =
(SID = mysql)
)
(HS = OK)
)create file initodbc.ora in the folder hs
HS_FDS_CONNECT_INFO = mysql
HS_FDS_TRACE_LEVEL = OFF
Restart the listner
tnsping
C:\users\administrator > tnsping mysql
AMT Ping Utility for 64-bit Windows: Version 10.2.0.5.0 - Production 08-NOV-2
015 13:02:52Copyright (c) 1997, 2010, Oracle. All rights reserved.
Use settings files:
C:\oracle\product\10.2.0\db_2\network\admin\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 10.153.103.5)
(PORT = 1521)) (CONNECT_DATA = (SID = mysql)) (HS=OK))
OK (0 msec)Create the connection odbc for Unicode
the test is successful
now, I create the dblink
create public mysql database link to connect to cssDBTeam identified by oracle using "mysql";
then try to select from a table inside the MySQL database
SQL > select * from appeal@mysql;
Select * from appeal@mysql
*
ERROR on line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Cannot retrieve the text of the message NETWORK/NCR 65535
ORA-02063: preceding 2 lines of MYSQL
How could I solve this problem?
Thank you.
Hello
I realize that your problem is that 10.2 HSODBC was never focused on the Windows 64-bit platform and was only available on 32-bit Windows. You can not install the 32-bit on WIndows 64-bit HSODBC.
Your only option is to install 11.2 DG4ODBC on your platform Windows 64 - bit, or if you have a RDBMS 10.2 installed on another platform, then you could use HSODBC as part of this installation and connect from the RDBMS on Windows 64 - bit using the links in the database. HSODBC 10.2 software could not be installed as a stand-alone product and was only available as part of an RDBMS install.
Kind regards
Mike
-
DB ERROR: ORA-01033: ORACLE initialization or shutdown in progress
Hello
I want to start the Oracle 11 g server, but I get this error message
ERROR:
ORA-01033: ORACLE initialization or shutting
Process ID: 0
Session IDs: serial number 0: 0
Note:-My db was working fine, but after Windows Update and restarting the computer, I get this error
I followed the previous thread that describes what it takes, but I am getting below error
SQL * more: Production of the version 11.2.0.2.0 on Tue Jan 15 15:10:12 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL > connect sys/admin123 have sysdba
ERROR:
ORA-28056: audit event log entry records Windows failed
OSD-226114008: Message not found 226114008. product = RDBMS. installation = SOSD
S/O-error: (OS 1502) the event log file is full.
ORA-28056: audit event log entry records Windows failed
OSD-226114008: Message not found 226114008. product = RDBMS. installation = SOSD
S/O-error: (OS 1502) the event log file is full.
SQL > shutdown immediate
ORA-01012: not connected
SQL > startup
ORA-01012: not connected
SQL > shutdown immediate
ORA-01012: not connected
SQL >
can you please tell me what to do
Thanks in advance
Published by: gaelle Medlery on 15 January 2013 02:16Hello
In the error message, it is clear that stop db is in progress. Must wait some time yet so that will end the shutdown process, then you can start. If you do not have the waiting time you reboot the machine so that once the server has been restarted, you can start your database.Kind regards
Kishore -
ORA-28545: error diagnosed by Net8 when connecting to an agent
Hi all
This question was asked several times in this forum and I went to many discussions in this forum, but unfortunately I failed.
I want to connect to MySQL database to oracle. I have the following configurations.
- Oracle database edition company 12 c (12.1.0.2.0) 64 bits on 64-bit Windows server 2012
- I have 5.6.11 MySQL on windows 7 64 bit
- I downloaded the driver site for delivery of oracle ODBC (MySQL Connector/ODBC 5.3.4 MSI for Windows x 86 (64 bit))
- I have install ODBC on my oracle server, a full install which installs the Unicode and Ansi versions.
- I create the connection ODBC for Unicode by going to control panel-> administrator tools-> (64-bit) ODBC Data Sources-> system DSN. I test and the test succeeded.
- I have set up my files Listner.ora, Tnsname.ora and initmysql.ora as below;
Listner.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = c:\app\Administrator\product\12.1.0\dbhome_1)
(= Extproc PROGRAM)
(ENVS = "EXTPROC_DLLS=ONLY:c:\app\Administrator\product\12.1.0\dbhome_1\bin\oraclr12.dll")
)
(SID_DESC =
(SID_NAME = mysql)
(ORACLE_HOME = C:\app\Administrator\product\12.1.0\dbhome_1)
(PROGRAM = dg4odbc)
(ENVS = LD_LIBRARY_PATH = C:\app\Administrator\product\12.1.0\dbhome_1\LIB)
)
)LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))
)Tnsnames.ora
PDBORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = pdborcl.hct.org)
)
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.hct.org)
)
)MySQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = N410FS02)(PORT = 1521))
(CONNECT_DATA =
(SID = mysql)
)
(HS = OK)
)initmysql.ora (C:\app\Administrator\product\12.1.0\dbhome_1\hs\admin\)
HS_FDS_CONNECT_INFO = mysql
HS_FDS_TRACE_LEVEL = OFF
then I stop and start the listener, the listener status is less than
LSNRCTL for 64-bit Windows: Version 12.1.0.2.0 - Production on April 23, 2015 09:16
: 52Copyright (c) 1991, 2014, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=ORADEV.hct.org) (PORT = 152
(1)))
STATUS of the LISTENER
------------------------
Alias LISTENER
TNSLSNR for Windows 64-bit version: Version 12.1.0.2.0 - Prod
ction
Start date April 23, 2015 09:13:56
Uptime 0 days 0 h 2 min 59 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
C:\app\Administrator\product\12.1.0\dbhome_1\network\a Listener parameter file
dmin\listener.ora
C:\app\Administrator\diag\tnslsnr\ORADEV\listener\aler log listener
t\log. XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ORADEV.hct.org) (PORT = 1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))
Summary of services...
Service 'CLRExtProc' has 1 instance (s).
Instance of 'CLRExtProc', status UNKNOWN, has 1 operation for this service...
"Mysql" service has 1 instance (s).
"Mysql", status UNKNOWN instance, has 1 operation for this service...
Service 'orcl.hct.org' has 1 instance (s).
Instance "orcl", State LOAN, has 1 operation for this service...
Service 'orclXDB.hct.org' has 1 instance (s).
Instance "orcl", State LOAN, has 1 operation for this service...
Service 'pdborcl.hct.org' has 1 instance (s).
Instance "orcl", State LOAN, has 1 operation for this service...
The command completed successfullytnsping MySQL
AMT Ping Utility for 64-bit Windows: Version 12.1.0.2.0 - Production on 23-APR-2
015 09:17:54Copyright (c) 1997, 2014, Oracle. All rights reserved.
Use settings files:
c:\app\Administrator\product\12.1.0\dbhome_1\network\admin\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = N410FS02)
() (PORT = 1521)) (CONNECT_DATA = (SID = mysql)) (HS = OK))
OK (40 msec)then I open sqlplus and connect to my plug-in database as user sys and create a link from public database for the test scheme that I have created in the MySQL database.
create public database link mysql connect to test identified by test using 'mysql';
then I try the table1 which lies in the scheme of test of MySQL to sqlplus as below
SQL> select * from table1@mysql; select * from table1@mysql * ERROR at line 1: ORA-28545: error diagnosed by Net8 when connecting to an agent Unable to retrieve text of NETWORK/NCR message 65535 ORA-02063: preceding 2 lines from MYSQL
I have tried versions of Ansi and Unicode ODBC, but the same question.
where is the problem in my setup?
Thank you.
You use the wrong host name in the tnsnames.ora.
Take a look at the Oracle listener - it is configured with the address: (ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))
In your tnsnames.ora you specified in the mysql alias: (ADDRESS = (PROTOCOL = TCP) (HOST = N410FS02)(PORT = 1521))
It does not work. Alias configured in the tnsnames.ora AMT must reference an Oracle listener who begins the process of bridge, so in your case at ORADEV.hct.org.
So please correct your tnsnames.ora entry:
MySQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = ORADEV.hct.org)(PORT = 1521))
(CONNECT_DATA =
(SID = mysql)
)
(HS = OK)
)
-
Once again - ORA-28545: error diagnosed by Net8 when connecting to an agent
I am trying to connect to a SQL server server 2012
I make the connections ODBC (called MOFIBO2, MOFIBO3, MOFIBO4) and I have a successful connection to then SQL server.
The Oracle database is:
Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production
I made 3 versions of the initdg4odbc.ora and they all look the same:
# This is an example of initialization file of the agent that contains the HS settings
# necessary for the database to ODBC gateway
#
# HS init parameters
#
HS_FDS_CONNECT_INFO = MOFIBOx (MOFIBO2, MOFIBO3 and MOFIBO4)
HS_FDS_TRACE_LEVEL = off
#
# Required for the non-Oracle system environment variables
#
#set < varenv > = < value >
My lisener.ora look like this:
listener.ora # Network Configuration file: C:\app\Administrator\product\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = RESP-ora01)(PORT = 1521))
)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(= Extproc PROGRAM)
)
(SID_DESC =
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(SID_NAME = RESPTEST)
)
(SID_DESC =
(SID_NAME = MOFIBO2)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
)
(SID_DESC =
(SID_NAME = MOFIBO3)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
)
(SID_DESC =
(SID_NAME = MOFIBO4)
(ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
)
)
ADR_BASE_LISTENER = C:\app\Administrator\product\11.2.0\dbhome_1\log
And my share of tnsnames.ora mofibo then look like this (I did three variants as different "manual" using different methods):
MOFIBO2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521))
(CONNECT_DATA =
(SID = MOFIBO2)
)
(HS = OK)
)
MOFIBO3 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID_NAME = MOFIBO3)
)
(HS = OK)
)
MOFIBO4 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MOFIBO4)
)
(HS = OK)
)
When tnsping to all three versions I get this:
C:\users\administrator > tnsping mofibo2
AMT Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on April 24, 2014 12:48:17
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Use settings files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521)) (CONNECT_DATA = (SID = MOFIBO2)))
HS = OK))
OK (10 ms)
C:\users\administrator > tnsping mofibo3
AMT Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on April 24, 2014 12:48:23
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Use settings files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DELTOMBE
(RELATED) (SID_NAME = MOFIBO3)) (HS = OK))
OK (10 ms)
C:\users\administrator > tnsping mofibo4
AMT Ping Utility for 64-bit Windows: Version 11.2.0.3.0 - Production on April 24, 2014 12:48:27
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Use settings files:
C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = resp-ora02)(PORT=1521)) (CONNECT_DATA = (SERVER = DELTOMBE
(RELATED) (SERVICE_NAME = MOFIBO4)) (HS = OK))
OK (0 msec)
I created three database link with then in following (user name and password was in the wright case):
create database MOFIBODB2 link to connect to the "username <>' identified by"password <>"with"MOFIBO2 ";
create database MOFIBODB3 link to connect to the "username <>' identified by"password <>"with"MOFIBO3 ";
create database MOFIBODB4 link to connect to the "username <>' identified by"password <>"with"MOFIBO4 ";
When I tried to select from a table (select * from clients @ < DATABASELINKHERE >) I get errors (replace MOFIBO2 with MOFIBO3/4 and the same error occurs):
SQL > select * from customers@MOFIBODB2;
Select * from customers@MOFIBODB2
*
ERROR on line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Cannot retrieve the text of the message NETWORK/NCR 65535
ORA-02063: preceding 2 lines of MOFIBODB2
What was my mistake?
Hello
In the listener.ora, you have the host as -
(HOST = RESP-ora01)
but in tnsnames.ora entries you have.
(HOST = RESP-ouA02)
The tnsnames.ora host must be the same as the host of the listener.
Unless you have a listener running on the RESP-ouA02 it is not clear why the tnsping returns a result.
Change the host in the tnsnames.ora and let us know what happens.
Kind regards
Mike
-
Java error when agent deployment...
Hi all
I try to install oracle 11.1 agent. Already have the configuration (version 11 as well) WHO and all. Agent deployment. I followed the guide... but during the agent installation using the answer file... I get error related to java? I have java installed on the server where my agent is deployed... any help would be appreciated
http://download.Oracle.com/docs/CD/E11857_01/install.111/e16847/install_agent_usng_rsp.htm#CEGGACJE
$ ./runInstaller -silent -responseFile /oracle/OEMAGENT/software/hpunix/response/additional_agent.rsp Starting Oracle Universal Installer... Checking Temp space: must be greater than 150 MB. Actual 951 MB Passed Checking swap space: must be greater than 150 MB. Actual 49140 MB Passed Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-05-19_03-12-02PM. Please wait ...$ Error: could not find libjava.so Error: could not find Java 2 Runtime Environment. $ $ $ $ whereis java java: /opt/java1.5/bin/java /opt/java6/bin/java /opt/java1.4/bin/java /opt/java1.4/man/man1/java.1 $ $ $ env|grep java PATH=/opt/java6/bin:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/gvsd/bin:/opt/ipf/bin:/opt/nettladm/bin:/opt/fcms/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/sas/bin:/opt/graphics/common/bin:/opt/atok/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/sec_mgmt/bastille/bin:/opt/caliper/bin:/opt/drd/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/resmon/bin:/opt/gnome/bin:/opt/perf/bin:/opt/propplus/bin:/usr/contrib/kwdb/bin:/opt/perl_32/bin:/opt/perl_64/bin:/opt/prm/bin:/opt/sfm/bin:/opt/swm/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/swa/bin:/opt/hpsmh/bin:/opt/langtools/bin:/opt/wlm/bin:/opt/gwlm/bin:/opt/sentinel/bin:/opt/hpnp//bin:/opt/hpnpl//bin:/opt/ignite/bin JAVA_HOME=/opt/java6 $ $ which java /opt/java6/bin/java $
Oracle Universal Installer is normally using its own JRE to its own media. Verify that your Oracle zip files have been correctly uploaded: you can do this with cksum (see page that displays for each download zip file cksum).
-
Oracle Version of policy template - how deploy us multiple versions?
Oracle Version of policy template - how deploy us multiple versions of the same rule of thumb in determining server? The intention is to have the rule of thumb in parallel of the versions available and the client to the web service to decide which version to use?
You don't have to reboot - just put "cache.loaded.rulebases = false" in the application.properties file (its value is 'true' by default). If you rename this * after * deployment then it could give inconsistent results, but must ultimately resolve itself.
-
I had to reload of the two ESX 3.0.2 Server I have here.
Now the I get a HA error "an error has occurred while setting up the HA Agent on the host" when try to reconfigure HA.
I note also that the same host if console type 'hostname - a' I get "Failed to find host name"
I still seem to migrate virtual machines, but clearly something is wrong somewhere, there DNS config file I can check, I already check ed the hosts file and I can ping everything using long DNS name and short host name.
Or maybe there is dns service can I restart?
Thank you
If you are running ESX 3.0.x check/etc/FT_HOSTS
You can also check http://kb.vmware.com/kb/1003691
-
I get a ""oracle.jbo.JboException: identity store is null ' error in my web application from merger which is based on the UIShell and UIShellMainArea models. " I disassembled the application at a very basic level. The error is thrown when the data control is added and the showDetailHeader is toggled between releases/no disclosed (and other actions as well).
The same or similar application without models UIShell/UIShellMainArea construction works very well. I tried it with Dynamic tabs Shell and other models with success.
I'm on the R8, JDev version is 11.1.1.7.2 and I added the libraries required for the model/viewcontroller. Since this is a small application, I here enclose with a script to create the table/data used by the application.
I couldn't find much of anything related to this Support of Oracle or other research online. Any help will be greatly appreciated.
Yes, I can confirm that, you will get this error when your LDAP connection is not correct.
To prove that I changed my LDAP server to a bad server so that the connection fails.
JDev newspaper, I saw this error
The rendered page, and when I fell ShowDetailHeader (Infact any PostBack) caused the exact error even to appear.
And the stacktrace of the Exception in JDev journal is
Caused by: oracle.jbo.JboException: storage of identity is null.
at oracle.apps.fnd.applcore.pref.model.util.PreferencesUtil.getImpersonateeList(PreferencesUtil.java:832)
at oracle.apps.fnd.applcore.patterns.uishell.ui.bean.GlobalAreaBackingBean.isImpersonateeListAvailable(GlobalAreaBackingBean.java:1650)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.el.BeanELResolver.getValue(BeanELResolver.java:261)
... more than 68
Hope this helps you.
-
Error while installing Oracle 11 g under Solaris 10 SPARC 2 forms and reports
We are trying to install Oracle Forms and reports 11 GR 2 (11.1.2.2.0) 64-bit Solaris 10 SPARC 64-bit (U9) and we are facing errors of installation during installation of 11 GR 2 forms. I will note down the environment and steps reproduced to produce errors:
Environment:
Operating system: Solaris 10 SPARC 64-bit (U9)
JDK: Oracle 1.7.0_79 64-bit JDK
WebLogic: Oracle WebLogic Server 10.3.6 64-bit
Form & reports: 11.1.2.2.0 64-bit
Steps to follow:
1. install JDK - success
2. installation of WebLogic Server 10.3.6 (64-bit) and created a new home of Middleware. -Success
3. ensure that all prerequisites are met by a prior information of Oracle: http://docs.oracle.com/html/E25460_01/r2_fr_requirements.htm
a. all patches necessary OS and packages are installed
b. There are a lot of disk space, swap, TEMP space and memory (RAM live)
c. all environment variables are cleaned, as indicated in the prerequisites in the URL
d. no other product Oracle doesn't lie in the path except for the JDK. (NOTE: Forms 6i is installed in a separate House in the server.)
e. all software are 64-bit
f. the user oracle (same user who has installed the JDK and WebLogic) has read, write, and execute permissions for the entire House of Middleware.
g. we set the LD_LIBRARY_PATH variable to $ORACLE_HOME/lib as indicated in the Doc ID 1643548.1.
4. start the installer of Forms
a. choose 'install only - do not configure ".
b. all the prerequisite checks passed
Errors: Installation product until it reaches approximately 92% when we get the first error:
"Error in invoking target 'nnfgt.o' of makefile '$ORACLE_HOME/network/lib/ins_net_client.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".
If we click on 'Continue' to work around the error, we get another error after that:
"Error in invoking target 'repeat' of makefile '$ORACLE_HOME/precomp/lib/ins_precomp.mk'. See "$ORA_INVENTORY/logs/installDATE.log" for more details".
Someone has met these errors before installing 11 GR 2 forms (11.1.2.2.0) on Solaris 10 SPARC 64-bit?
Thank you
Scott
We have solved the problem. The library of expr has not found in/usr/xpg4/bin but in another location. After you create a symbolic link in/usr/xpg4/bin pointing to where it has been deployed, the installation is completed successfully (after removing the previous attempt failed).
A test you can do to make sure that expr is working correctly is to run expr 1 + 1 in the shell. If the command works, the library can be found.
Matthew, I thank you for your suggestions as well.
Thank you
Scott
-
Data error Services POST Oracle REST of the escape character
I get an error 400 Bad Request of ADR operating POST or PUT with JSON that contains a slash reverse to escape the quotes and forward slashes, etc using Java. How can I POST JSON with these types of characters?
Oracle REST Services 2.0.9 data 224.01.05
Database 11.2.0.3
Thanks in advance for any help.
Raymond
Oracle support:
The 404 Bad Request appears as the ORDS JSON parser does not accept escape forward slash (/) characters. Remove the slash before each slash to solve the problem
Using the example provided, change:
"WebURL": 'http:///\/ \/enterprise","LogoURL":"http:///\/testsite.domain.net\/clients\/pxx2014\/Custom\/354881.jpg","Category":"Consulting, Education\/training, Service industry www.testsite.com '...
... for:
"WebURL": "http://www.testsite.com/enterprise", 'LogoURL': 'http://testsite.domain.net/clients/pxx2014/Custom/354881.jpg', 'Category': 'Consulting, training, Service industry '...
Escaping the obliques is allowed in the JSON specification, but is not necessary. It of a minor flaw in the ORDS JSON parser and is addressed in the final version of 3.0.x. All other escaping works very well with the ORDS JSON parser.
-
Executing:
%MW_HOME%/oracle_common/common/bin/WLST.cmd %IAM_HOME%/common/tools/configureSecurityStore.py d %MW_HOME%/user_projects/domains/oimdomain-c IAM Pei Oracle123 m create
.....
WebLogic Scripting Tool (WLST) initializing...
Welcome to WebLogic Server Administration scripts Shell
Help() type help on the available commands
........
........
Info: Data Source is: opss-DBDS
seedSch [oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator]
emaAndCreateDIT - HSD-10000 failed: there was an internal error in the policy of m
ore.
Exception in thread "Main Thread" java.lang.RuntimeException: JPS-10000: there w
as internal an error in the policy store.
oracle.security.jps.internal.api.common.JpsCredentialStoreLdapNodeCreationExcept
ion: JPS-10000: there was an internal error in the policy store.
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.cre
ateJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:303)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigur
ator.addServiceStoreBase(LdapCredStoreServiceConfigurator.java:114)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigur
ator.seedSchemaAndCreateDIT(LdapCredStoreServiceConfigurator.java:142)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.runConfiguration(LdapServiceEnabler.java:485)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.configureCredentialStoreService(LdapServiceEnabler.java:233)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.configureSecurityServices(LdapServiceEnabler.java:171)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.main(LdapServiceEnabler.Java:129)
Caused by: oracle.security.jps.service.policystore.PolicyStoreConnectivityExcept
ion: JPS-10000: there was an internal error in the policy store.
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.handl
eRollbackException(JpsDBDataManager.java:1345)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.inter
nalCommitTxn(JpsDBDataManager.java:1508)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commi
tTransactionInDoAs(JpsDBDataManager.java:1475)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commi
tTransaction(JpsDBDataManager.java:1466)
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.cre
ateJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:296)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigur
ator.addServiceStoreBase(LdapCredStoreServiceConfigurator.java:113)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigur
ator.seedSchemaAndCreateDIT(LdapCredStoreServiceConfigurator.java:142)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.runConfiguration(LdapServiceEnabler.java:484)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.configureCredentialStoreService(LdapServiceEnabler.java:232)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.configureSecurityServices(LdapServiceEnabler.java:170)
... 1 more
Caused by: javax.persistence.RollbackException: Exception [EclipseLink-4002] (Ec
Lipsius persistence Services - 2.3.1.v20111018 - r10243): org.eclipse.persistence.ex
receptions. DatabaseException
Inner exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001
: constraint unique (DEV_OPSS. IDX_JPS_RDN_PDN) violated
Error code: 1
Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?,?,?)
link = > [3 related parameters]
Query: InsertObjectQuery (EntryId = 11439:rdn = credentialstore:pdn = cn = jpsroot, cn = cn =
jpscontext, cn = iam,: entry JpsStore = {[EntryId = 11439:Attribute = 45357 RowId
DN = cn = CredentialStore, cn = ARA, cn is JPSContext, cn = jpsroot, EntryId = 11439:Attribu
You RowId = 45358
objectClass = top, EntryId = 11439:Attribute RowId = 45359
objectClass = orclContainer, EntryId = 11439:Attribute RowId = 45360
CN = CredentialStore]})
at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImp
l.commitInternal(EntityTransactionImpl.java:102)
at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImp
l.Commit(EntityTransactionImpl.Java:63)
to oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager$ 8.run
(JpsDBDataManager.java:1488)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.inter
nalCommitTxn(JpsDBDataManager.java:1492)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commi
tTransactionInDoAs(JpsDBDataManager.java:1476)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commi
tTransaction(JpsDBDataManager.java:1466)
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.cre
ateJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:297)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigur
ator.addServiceStoreBase(LdapCredStoreServiceConfigurator.java:114)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigur
ator.seedSchemaAndCreateDIT(LdapCredStoreServiceConfigurator.java:142)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.runConfiguration(LdapServiceEnabler.java:485)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.configureCredentialStoreService(LdapServiceEnabler.java:233)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.configureSecurityServices(LdapServiceEnabler.java:171)
... 1 more
Caused by: Exception [EclipseLink-4002] (Eclipse persistence Services - 2.3.1.v2)
0111018 - r10243): org.eclipse.persistence.exceptions.DatabaseException
Inner exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001
: constraint unique (DEV_OPSS. IDX_JPS_RDN_PDN) violated
Error code: 1
Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?,?,?)
link = > [3 related parameters]
Query: InsertObjectQuery (EntryId = 11439:rdn = credentialstore:pdn = cn = jpsroot, cn = cn =
jpscontext, cn = iam,: entry JpsStore = {[EntryId = 11439:Attribute = 45357 RowId
DN = cn = CredentialStore, cn = ARA, cn is JPSContext, cn = jpsroot, EntryId = 11439:Attribu
You RowId = 45358
objectClass = top, EntryId = 11439:Attribute RowId = 45359
objectClass = orclContainer, EntryId = 11439:Attribute RowId = 45360
CN = CredentialStore]})
to org.eclipse.persistence.exceptions.DatabaseException.sqlException (Dat
abaseException.java:324)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.exec
uteDirectNoSelect(DatabaseAccessor.java:840)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.exec
uteNoSelect(DatabaseAccessor.java:906)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basi
cExecuteCall(DatabaseAccessor.java:592)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.exec
uteCall(DatabaseAccessor.java:535)
at org.eclipse.persistence.internal.sessions.AbstractSession.basicExecut
eCall(AbstractSession.java:1717)
to org.eclipse.persistence.sessions.server.ClientSession.executeCall (Cli
entSession.java:253)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism
.executeCall(DatasourceCallQueryMechanism.java:207)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism
.executeCall(DatasourceCallQueryMechanism.java:193)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism
.insertObject(DatasourceCallQueryMechanism.java:342)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.inse
rtObject(StatementQueryMechanism.java:162)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.inse
rtObject(StatementQueryMechanism.java:177)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.inser
tObjectForWrite(DatabaseQueryMechanism.java:472)
org.eclipse.persistence.queries.InsertObjectQuery.executeCommit (insert
tObjectQuery.java:80)
at org.eclipse.persistence.queries.InsertObjectQuery.executeCommitWithCh
angeSet(InsertObjectQuery.java:90)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.execu
teWriteWithChangeSet(DatabaseQueryMechanism.java:287)
at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery
(WriteObjectQuery.java:58)
at org.eclipse.persistence.queries.DatabaseQuery.execute (DatabaseQuery.j
AVA: 844)
to org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork (Dat
abaseQuery.java:743)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitO
fWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:108)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitO
fWork(ObjectLevelModifyQuery.java:85)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExec
uteQuery(UnitOfWorkImpl.java:2871)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuer
y(AbstractSession.Java:1516)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuer
y(AbstractSession.Java:1498)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuer
y(AbstractSession.Java:1449)
at org.eclipse.persistence.internal.sessions.CommitManager.commitNewObje
ctsForClassWithChangeSet(CommitManager.java:224)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObje
ctsForClassWithChangeSet(CommitManager.java:191)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObje
ctsWithChangeSet(CommitManager.java:136)
at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObj
ectsWithChangeSet(AbstractSession.java:3799)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToData
base(UnitOfWorkImpl.Java:1415)
at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.c
ommitToDatabase(RepeatableWriteUnitOfWork.java:636)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToData
baseWithChangeSet(UnitOfWorkImpl.java:1505)
at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.c
ommitRootUnitOfWork(RepeatableWriteUnitOfWork.java:267)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitAndRes
UME(UnitOfWorkImpl.Java:1143)
at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImp
l.commitInternal(EntityTransactionImpl.java:84)
at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImp
l.Commit(EntityTransactionImpl.Java:63)
to oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager$ 8.run
(JpsDBDataManager.java:1487)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.inter
nalCommitTxn(JpsDBDataManager.java:1492)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commi
tTransactionInDoAs(JpsDBDataManager.java:1475)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commi
tTransaction(JpsDBDataManager.java:1466)
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.cre
ateJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:296)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigur
ator.addServiceStoreBase(LdapCredStoreServiceConfigurator.java:113)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigur
ator.seedSchemaAndCreateDIT(LdapCredStoreServiceConfigurator.java:142)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.runConfiguration(LdapServiceEnabler.java:484)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.configureCredentialStoreService(LdapServiceEnabler.java:232)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.configureSecurityServices(LdapServiceEnabler.java:170)
... 1 more
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique
constraint (DEV_OPSS. IDX_JPS_RDN_PDN) violated
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:445)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:450)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:192)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8 (T4CPreparedStatement.
Java: 207)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows (T4CPreparedSta
directly. Java:1044)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout (OracleStateme
NT. Java:1329)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal (OraclePrep
aredStatement.java:3593)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate (OraclePrepar
edStatement.java:3674)
to oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate (Oracl
ePreparedStatementWrapper.java:1354)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.exec
uteDirectNoSelect(DatabaseAccessor.java:831)
... more than 45
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.throwExceptionWithStackTrace(LdapServiceEnabler.java:145)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnab
ler.main(LdapServiceEnabler.Java:137)
Error: Cannot initialize the security of the store.
Error: Create operation failed.
I fixed the problem by checking the article KM 1539345.
Thanks for your help!
-
Error when running oracle database synchronization project
Hi all
We have created a connection to the oracle database with native database connector in the Dell One Identity Manager 7.0.1.
We created the project of synchronization for the initial synchronization. working server have been defined with the Native Database Connector service. but when the synchronization of the project executing its gives me error. below
"[2161006] a full synchronization runtime error!"
VI. Projector.Editor.Internal.GlobalActionHandler.HandleEvent (Object sender, eventName, String, Object [] args)
VI. Projector.Editor.Internal.GlobalActionHandler._ExecuteStartInfo (IProjectionStartInfo startInfo)[810103] error generating processes to the event being handled.
VI. DB. . Entities.PermissionsUnitOfWorkd__2b. MoveNext()
VI. DB. Entities.UnitOfWorkImpl.d__13.MoveNext)
VI. DB. JobGeneration.JobGeneratorImpl.d__0.MoveNext) [810222] error running script "Event_Run".
VI. DB. JobGeneration.JobGeneratorImpl.d__0.MoveNext)
VI. DB. JobGeneration.JobGeneratorImpl. <_CreateChainsForSingle>d__10.MoveNext)
VI. DB. Scripting.ScriptInstance.Eval (String key, Object [] parameters)[810108] error generation process step Run event.
at DynScripts.JobGen_DPRProjectionStartInfo_203oMa0Utun7HUiP7JfLSY2TsE.Event_Run (JobGenContext context)[810109] error generating process DPR_DPRProjectionStartInfo_Run_Synchronization.
at DynScripts.JobGen_DPRProjectionStartInfo_203oMa0Utun7HUiP7JfLSY2TsE.Event_Run (JobGenContext context)
at DynScripts.JobGen_DPRProjectionStartInfo_203oMa0Utun7HUiP7JfLSY2TsE.Chain_DPR_DPRProjectionStartInfo_Run_Synchronization (JobGenContext context, String EventName)[810110] error generating process step run the synchronization.
at DynScripts.JobGen_DPRProjectionStartInfo_203oMa0Utun7HUiP7JfLSY2TsE.Chain_DPR_DPRProjectionStartInfo_Run_Synchronization (JobGenContext context, String EventName)
at DynScripts.JobGen_DPRProjectionStartInfo_203oMa0Utun7HUiP7JfLSY2TsE.Job_DPR_DPRProjectionStartInfo_Run_Synchronization_Run_Synchronization (JobGenContext context, String EventName, JobChain myChain, IVarContext chainValues)[810112] there is no server that can perform server mask and/or my script from selection of an entry-level server.
VI. DB. JobGeneration.JobGenContext. <> c__DisplayClass1. <_GetJobServer>b__0 > d__3.MoveNext)Please help me in this.
Kind regards
Hello
In your synchronization project, go to Setup > Basic objects...
If you do not have a base object that defines the working server where synchronization has to be performed then you will get the above error.
Create a base object and try again.
HTH, B.
Maybe you are looking for
-
The site tells me your apple id is not an apple ID
When I go in Help and support, and then I write my apple Id, he tells me this is not an apple ID and I am sure that I write it true
-
Atrix: No option to link contacts
I feel a little like I'm losing my mind here. I had my Atrix for a few weeks now (switched from an iPhone) and especially, I love it, but I can't find the option to make all contacts. With friends who have many Facebooks, Twitters and others, is to l
-
age of empires III download... what I need to make the game load on windows 7
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem
-
SOMSI DEMOVERZIU NEMCINY KOMPRIMOVANEHO SUBORU STIAHOL HAS VYSVETLIŤ HO OTVORIT AT PREZRIET IF
-
My Iphone will not update with itunes.
My Iphone will not update with itunes. He hit a certain part and it's downloading but everything freezes, I can't it never ends downlaoding my photos or anthing. Also, my itunes does not connect to the itunes store. Original title: program compatibil