Error in link delay/reduction

Similar Questions

• Help: error in link 1 project

  Error Msg

  "

  error in link 1 project

  underfined symbol_Word Rpt_ApplicationQuit @8 referenced in "name.c.

  "

  can someone advice how to solve the error above?

  Thank you

  That's the only mistake found associated with WordReport instrument? In order to use the instrument, you must load it into the section of the Instrument of the IDE and add the .fp corresponding to the project.

  You receive this error message in the debug or release configuration?

  You can compile the example project \samples\activex\word\wordrpt.cws without errors?

• Do not have access to Internet thorugh Samsumg PC Studio. "" Operating system error: PPP link protocol was terminated ""

  I'm using Samsung C5212i. while I connect my mobile to PC for internet, he demonstrated error "" operating system error: PPP link protocol was terminated "." How to solve this problem?

  Hey Bigot,

  I suggest that you contact Samsung for assistance with Samsung PC Studio.

  Support | Samsung & Service Solutions product support

• Broken errors in links (menu and Gallery associated extension) after repositioning of the folder.

  After moving a few pages of the gallery in the site, I thought well done at that time, I started testing mistakes of. On large site check for broken links, using DW CS6 wide audit of the site "Link Checker", have received warnings of broken links:

  "" /p7IGM_rootFiles/p7igm/p7IGMscripts.js (1st error) right column then shows------/ /: \:

  "" /p7pm3/p7PM3scripts.js (2nd error) right column then shows------/ /: \:

  Test site at:

  http://0182d1d.netsolhost.com/mickeyharrisart/index.html

  Advice would be appreciated.

  Sorry for the delay, but a power supply failure put me off line for a while.

  I do not use CS6, then your

  Right column then shows:

  \"//:\"

  no sense to me.

  The two scripts are located in the folders expected defined in connection paths.

  The empty line 1 is not a problem.

  Problems with the functionality of the site?

• Often get error Communication Link failure

  Frequently to link failure error in Communication with the host downstream, we recently Upgraged our FMS to 5.6.4 5.5.8

  Pls suggest any quick solution

  Sriram salvation,

  Sorry for the delay in responding.

  The log you posted has about 7000 errors in this document, eight of which are "Communications link failure".

  These mistakes and others in the file, suggest that there is some network downtime intermittent between SGF and its database and monitored hosts and the FMS.

  It would be wise to correct these network failures and also address the other issues identified in newspapers of this.

  Is recommended to open a pension case .

  I enclose an automated analysis of the log file created by the consultant of Foglight excellent David Mendoza.

  Kind regards

  Brian Wheeldon

• Error through links on the iphone (but not Web site)

  Here's a mystery - maybe one of you can help.

  I was adding some css on my site (govinnovator.com) today and added a typing mistake. Who made a mistake in my function.php file, which closed my site. (At this time, my site just showed the error analysis.)

  So, I used FTP and correction of the error. My site is now up, and all the links work when you access my site via my laptop.

  However, on my iphone, when I click on the link (http://govinnovator.com/hrabowski/) in Safari (or Chrome) to my latest message, it always shows the same parse error message.

  Strangely, no other connection post show this error via iphone - only my most recent post.

  Any suggestions?

  Andy

  Update: the problem is fixed in a few hours. Of course, it was a matter of caching.

• Creation of stand-alone executable file with similar library files without errors of link

  I have an Executive Test that is run on two different test systems. Each stand has another card ARINC429. The old card use 429dll32.lib, while the most recent map use pci429.lib. Test Exec code only loads a single library file (using LoadExternalModule) depending on what the test bench has the card, but since there are many similar functions in both, ICB does not test Exec be built as a stand-alone executable.

  In CVI 5.0.1 I opens the "Create stand-alone executable file" and select "add files to the executable. I check the 429dll32.lib and the pci429.lib to include in the creation of executable, and then click 'OK '. When I click 'OK' to create the executable I have several link errors, one for each function both .lib files have in common.

  Is it possible for each of these .lib files to be included in the compilation without having to create two separate executables?

  eatmontr:

  If you use LoadExternalModule(), you need not include the .lib files in the Executive test project.  Refer to the CVI for LoadExternalModule help.

  Here's the info on the help:

  LoadExternalModule loads an external object module file. You need not list the file in your project or loaded as a module of an instrument.

  The file may be an object (.obj) file, a library file (.lib) or a library (.lib) import DLL.

  Here are a few articles to OR who can help.

  To access the plug-ins with CVI (with sample program) http://zone.ni.com/devzone/cda/epd/p/id/133

  How do I call dll if I have two functions with the same named in two different dll? http://digital.NI.com/public.nsf/allkb/5299ED8D43F3B5FE852563BF0056EBA6

• Installation of Java has wiped out everything on the computer receiver error message: "windows-delayed write filed" hard drive failure ' x 5

  I installed java and it wiped out my computer, no program, no picures, no parameters on the left? He even wiped my restore points.

  I tried to restore to the point of installation of java, but alas nothing has happened, now I get all these boxes warning "windows-delayed write filed" hard drive failure ' x 5 and also warning mean my HDD is in peril of the personal data.  This single icon left on my desk is the internet explore and internet runs very slowly, I am reluctant to sign something incase, there a virus or something.

  Please help me!

  Hi Carolinelightfoot,

  This error message occurs when the system could not read and write data to the registry file. The error indicates a problem with the registry.

  Method 1:

  You can run a Checkdisk to see if there are drive errors that can cause this problem.

  Check your hard drive for errors

  Note: When you run the disk check, there is a chance of losing the data that you can take a backup of important data before you run checkdisk.

  Method 2:

  You can also try to boot from a full version of Windows Vista installation disc and try to perform a restore of the system to WinRE (Windows Recovery Environment)

  What are the system recovery options in Windows Vista?

  Hope this information is useful.

• AppleSync notifier not workiing CoreFoundation.dll not found. Error in link in OUtlook 2007

  I have a Dell Inspiron from 9000 over 4 years running Vista. Since I installed iTunes I get the above error message every time that my PC starts. I followed the advice on the Windows support and uninstalled iTunes, then reinstalled, but the problem persists.

  In addition, whenever I get a message in Outlook 2007, that contains a link, whenever I click the link I get the message "this operation has been cancelled due to restrictions on this computer. Please contact your system administrator. Therefore, I must copy this link in Internet Explorer so that it can work.

  Any help gratefully received.

  

  RE: itunes error message.
  Read this link from Apple - Support - Discussions
  Topic: AppleSyncNotifier.exe Unable to locate CoreFoundation.dll
  http://discussions.info.Apple.com/message.jspa?MessageID=11324062

  If the answers he don't help, ask your own question to...
  Apple Discussions Forum - Support -: using itunes for Windows.
  http://discussions.Apple.com/forum.jspa?forumid=800

  RE: links not directly open from Outlook

  Please check if your Internet Explorer or your main browser (if you have multiple browsers) has all of its default...
  Start > default programs > Set Your Default programs > column on the left, click on Internet Explorer or your main browser. He said "this program has all its defaults"?
  If not, click on choose by default for this program > check on all the entries in the list > click Save

  Also do the same thing with Outlook, make sure he has all the defects.

  If this does not help, please repost the problem Outlook to the Microsoft Office Outlook forum
  http://social.answers.Microsoft.com/forums/en-us/OutlookSend/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Autodesk 3ds max 2015 ~ 16 error slate link parameters After Effects Compositor

  Autodesk 3ds max 2015 ~ 16 slate Compositor settings link
  After effects error: failure of internal audit, sorry! {No projects open.}

  (5027: 55)

  world you please this error?

  Hello Wal,

  Visit this forum: http://area.autodesk.com/blogs/maxstation/v3_3ds_max_2013_after_effects_file_menu_shows_no, _open_compositor_link_autodesk_vishnu_draft

  Thank you
  Kevin

• Error on linked clone of VMware View 4

  Hi all

  I just installed the trial version of 4 reviews. Creating linked clones, I get the following error:

  A specified parameter was not correct. Spec.Snapshot

  I know that XP image is OK I can clone the image manually.

  We are running vSphere with all patches installed.

  Anyone can shed light on this error?

  Thank you very much

  Thomas

  It's the same problem as described here: http://communities.vmware.com/thread/244269.

  You will need to disconnect / reconnect the ESX of VC servers.

• Error package links and Images

  

  Hello

  I have this error, and I did not now what to do. It is a .jpg image that I placed in the document. I already go in the menu links and doing a reissue, but nothing.

  If someone knows the answer to this problem, please help.

  My goal is to pack a vertical and a horizontal of the image to use in the Adobe digital Content Bundler.

  It was bound and then embedded or pasted (I think that the former, in this case). In any case this isn't a fatal mistake, especially for your release. RGB is only a problem when the press and can be corrected at this time here by converting to CMYK in PDF export.

• fatal error when linking or including the style sheet

  I recently started to do an exception error fatal when working with dreamweaver and php and a style sheet.
  I work with files php and style sheets for several weeks without problem. He seems to have an impact on a single file. (or all the files that php includes). I have even isolated the line of code that generates the error code that binds or includes the stylessheet. I tried different ways to link/include the stylesheet and still error. The strange thing is I can open the stylessheet in question fine in dreamweaver and have used for a while with a lot of changes.
  
  I have Dreamweaver MX 6.1 on Windows XP Pro (I installed the update to try to fix it but it did not help).
  
  Possible known problems or solutions? Thank you.
  William
  
  
  
  If one of my

  I have not tried validating at w3.org yet but I think I have solved the problem.

  Even if the css file opens fine, I removed commented code that redefines some colors. Removal of commented code duplication seems to have solved the problem...

  Thanks in any case.

• 1403 errors of links on this page:

  Page: [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=304]
  
  Country (United Kingdom)
  
  Links under Certification exams...-error rutnr 1403 course title:
  
  for example: [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41 & p_exam_id = 144 - 1Z1 |] [Oracle Database 11 g: program PL/SQL]
  
  
  (Hint: my humble opinion, I think that this should not be referenceing 1z0-144 not 1z1-144)
  
  Published by: bigdelboy on 27-Sep-2009 14:48 UNRESOLVED ISSUE at this point in time (from UK)

  Thank you for bringing this to our attention. We will try to find out who owns this page and to correct the link.

  Kind regards
  Brandye Barrington
  Certification Forum Moderator
  Manager certification program

• Receive the error without link, download of Civ III with steam.

  Original title: problems to download civ iii with steam

  haven't bought civ 3 steam started to download then received the error no support for windows connection saying steam is not compatible

  Hi Duncanostridge,

  1 Windows operating system you are using?

  2. What is the full error message that you receive?

  3. what version of Civ 3 do you use?

  4. are you facing issues to download the installation for the game files or you use a disk?

  5. If download you the installation files and receive the error, then when you download the files/game of?

  You can check with the technical support of Steam on the issue.

  Steam support

  Troubleshooting connection problems

  Troubleshooting: Specific error Messages

  If you have problems with compatibility, you try to install the game in compatibility mode and check if that helps.

  To run any application in compatibility mode, see the article:

  Make older programs in this version of Windows