error in @Override while chaning JDK1.6 to the JDk1.5

Similar Questions

• I get an error message "an error has occurred while trying to write to the CONFIG folder. MSI"by updating to adobe reader.

  I have a folder named CONFIG. MSI shows as locked in 'share with '.  I can't seem to change the configuration, that is, to unlock the file.  In addition, 'Properties' shows 22 files in the folder but only 2 files display in Windows Explorer.  When I try to update Adobe Reader, I get an error message that an error occurred during the attempt to write to the CONFIG folder. MSI.  I am the administrator on this PC.  What can I do?

  Original title: locked file, CONFIG. MSI

  Hi Paul Rumbaugh,.

   

  (1) this exactly happens when you try to access the folder?
  (2) what is the error message or error code ?
  (3) have you made changes on the computer?

  Method 1-

  You should check if the problem persists in Safe Mode as well.
  To connect in Safe Mode, you must follow the steps in the article-

  Start the computer in Mode safe

  Note: make sure you connect in Normal Mode after you perform the troubleshooting steps.

  Method 2-

  Perform the steps in the article-

  Disable the anti-virus software

  Enable or disable Windows Firewall

  Note: make sure that you turn on Windows Firewall and re- Activate the antivirus after performing all the troubleshooting steps given the computer can be at risk of infection by the virus.

  Method 3-

  See the steps in the link-

  Error writing to file C:Config.MSI

  Note: you must follow step 7 of article to return the computer to Normal startup after you perform the troubleshooting steps.

  Hope this helps!

• 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand

  When I try to go to my site, I get a blank screen and this message:

  Method not implemented

  GET to / not supported.

  Additionally, a 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand.

  Can someone help me fix this bug, please? Thank you!

  This problem may be caused by corrupted cookies or cookies that are blocked (check the permissions on the subject: permissions page).

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Please upgrade to the current version of Firefox 30.

  • Firefox > topic

  The version of Firefox you are currently running is no longer supported with security updates.

  • It is important to update Firefox and Add-ons to the latest version to get all security patches.

  You can find the full version of the current version of Firefox 30.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

• How can I fix tis (sorry, an error has occurred while processing your request.)

  When I try to go to traegergrills.com I get this message (sorry, an error has occurred while processing your request.) I can go on my other computer?

  This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

• I can't print from Firefox, receive "an unknown error has occurred while printing."

  Whenever I try to print something from Firefox (e-mail, reception and so on), printing fails and I get the message "an unknown error has occurred while printing." Printing from Internet Explorer works without any problem.

  You are welcome.

  Please mark it as resolvedusing the useful button when logged in to this forum.

• Error code 0000064c while trying to update

  Error code 0000064c while trying to update (dt000) on vista. any help much appreciated.

  Thanx
  Josh

  Hello

  Please provide information on the updates are to receive messages in your windows under Windows Updates. Then you can check if these updates are lying to your windows or not from http://support.microsoft.com.

  For now, try the following steps:

  1. Open the Windows services control panel (Control Panerl--> administrative tools)
  2. Stop the Service of Cryptographic Service, Windows Installer of Module Background Intelligent Transfer and services of Windows updates.
  3. Rename the c:\programs Data\microsoft\network downloader.old Downloader
  4. Rename C:\Windows\SoftwareDistribution in c:\Windows SoftwareDistribution.old
  5. Rename the Catroot2 Catroot2.old to c:\Windows\System32
  6. Restart the Service of Cryptographic Service, Windows Installer of Module Background Intelligent Transfer and services of Windows updates.
  7. Look for the updates.

  You can also try running the FixIt of http://support.microsoft.com/kb/971058/en-us.

  Concerning

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• While trying to connect to the VPN Windows, I get an error 868. What does that mean?

  original title: connection to the VPN

  While trying to connect to the VPN Windows, I get an error 868. What it means. The address of the server I used was 68.28.195.137. Help, please.

  Vijay Kapnadak

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

• I get an error code 646 while trying to download the updates

  I get an error code 646 while trying to download the updates, update security for Microsoft Works 9 (KB2431831)

  Download size: 2.1 MB

  Help, please

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

• An error occurred while Windows was working with the Control Panel file C:\WINDOWS\system32\ALSNDMGR. CPL.

  Title:C:\Windows\System32\ALSNDMGR. Original CPL.

  Running Windows XP PRO this message "an error occurred while Windows was working with the Control Panel file.

  C:\WINDOWS\system32\ALSNDMGR.cpl.

  Can I re-enstall or the download file?

  Hello

   

   

  1. Once you get the error message?

  2. What is the card its installed on the computer? E.g. Realtek

  3. do you have a cleaning registry registry booster software installed on the computer or third party?

  4. are you able to play sounds on the computer?

  5. have you done any software or hardware changes on your computer before this problem?

   

  Alsndmgr.cpl made reference to the Manager his control panel Realtek Semiconductor AC97 file.

   

  If you have the card Realtek sound on your computer, try the following steps

   

  Method 1:

   

   

  If you have your CD of the sound card, I suggest to uninstall the card drivers sound sound card support applications and reinstall them.

  Reference:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  See also:

  http://support.Microsoft.com/kb/307895

  Method 2:

   

  You can still download the drivers from the Realtek or the sound card manufacturer's Web site.

  http://www.Realtek.com.tw/

   

   

  Hope the information is useful.

  Thank you for the help, I downloaded the 97 Realteck PGM. He cured the issue.

• error message trying to run a clean boot "an access error was returned while trying to change a service."

  While trying to solve a problem with IE 8, I have a problem trying to run a clean boot.  When I start up I get a message on change in the config file. Click ok and sys config is displayed. Now, if I make a modification, OR not, I get an error message - "an access error was returned while attempting to change a service. You may need to log on using an administrator account to make the specified changes. "First of all I am logged on as administrator, secondly I get this error even when I select"normal start ". I used the clean boot before without problem.  Any ideas?  I am running win xp sp3.  I started having problems after the sp3 upgrade.

  Given that you are not using the standalone SP3 Installer AND since McAfee was working at the time of installation, that's what I'd do (well, I would do it only if I was almost 100% convinced there was no malware on my system):

  1. download the McAfee removal tool.

  2. download the installation file for the free version of Avira AntiVir.

  3. download the standalone SP3 Installer.

  4. download the standalone installer of IE8.

  5. physically disconnect from the Internet.

  6 turn off the automatic updates (temporarily).

  7 uninstall McAfee.

  8 run the McAfee removal tool to make sure that all other loose ends are supported.

  9 Uninstall SP3.

  10. run the system restore, select the before date SP3 has been installed.

  11 uninstall IE8 (and IE7, if necessary). Reason: It is important to be at the level of IE6.

  12 install the SP3. Reset.

  13 Installing IE8. Restart twice.

  14 install AntiVir.

  15 re - connect to the Internet.

  16. download and install the update of AntiVir.

  17 go into Windows Update and install all post-SP3 SECURITY update (stay away from any optional object).

  18 re-rockers automatic updates.

  After the back if you need links to the downloadable.

• The following error occurred while importing IMG_ #. JPG: The system cannot find the specified file.

  It really starts to annoy me. For some reason, Windows does not allow me to import my photos with Windows more, I was able to import pictures all the time, but all of a sudden it stopped. I tried the import with the program auto-importation of Windows and then I tried to use the import software called Windows Live Gallery. Both gave me the same error message "the following error occurred while importing IMG_ #.» JPG: The system cannot find the specified file. "I tried looking up this error on many sites and have not led to what. I tried to re-formating my memory card but it did not work. Please help me, I can not import all the images and is running out of memory cards, I don't want to delete the images I took because I can not import to my computer.

  Thank you.

  Hello
   
  1. you try to import these images on the camera?
  2. have you checked if the image files are present on the device?
   
  First cross check if the photos are present on the device and if you are importing from the right location. Try to copy the files manually and paste it on the desktop and see if it works.
   
  For more information on troubleshooting camera connection problems, visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems
   
  Post back with the results, so that we can help you better.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Error code: 80070103 while installing optional updates for Brother printer

  I have an optional update from Windows for my Brother, update storage software released in Scanner printer

  May 2009. Published March 5, 2013.

  I tried this option of Windows Update and after a few minutes of installing the update for the

  Brother printer and Scanner STC - 197C I get an error code: 80070103

  Windows Update has encountered an unknown error. I tried to update a few times and now I really need help with this.

  The answer can reply to my email address

  Hi André,.

  According to the description, I understand that you are getting an error code: 80070103 while installing optional updates for Brother printer on your Windows 7 machine. I will certainly help you get this fixed number.

  This problem can occur because of incorrect settings or services does not properly.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Windows Update error 80070103

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070103

   

  You receive error 0 x 80070103 when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/952032

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• I'm running into this error message to a sysprep to capture a WIM image modified: "a fatal error has occurred while trying to sysprep the machine."

  Original title: WDS & Sysprep

  Hello

  I'm running into this error message to a sysprep to capture a WIM updated image the:
  3.14 system preparation tool
  "A fatal error has occurred while trying to sysprep the machine."
  She is probably explained by the time of Amendment 3, but is there a way to bypass that force me to change the registry whenever I use the new image?
  Any recommendations on how to solve this problem would be appreciated.
  Thank you.

  GN

  Please post your request here:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproinstall&filter=AllTypes&sort=lastpostdesc

• Failed to save the system or create the image of the system, error: the problem occurred while trying to connect with the VSS writers (0 x 80042318).

  Original title: cannot backup Windows 7 system.

  When I try to back up the system or create the image of the system I get the following message, the error was detected in the Volumn Service VSS (Shadow Copy) the problem occurred while trying to connect with the VSS writers.  Verify that the event system Service and the VSS service are running and look for errors related to event logs. (0 x 80042318).

  Hi bernardolahoustino,

  Please keep us informed. Please let us know the State of the question, so that we can help you further.