Error in the compiler/bug "PDACluster"... »

Similar Questions

• Internal error of the compiler-123002

  Hi all

  I read this error in other post (with the server), I did what it says also in Help:

  -J' reinstalled the drivers and all the things, Xilinx tools are installed as well.

  -I don't have that one device target FPGA (RIO0, SMU-7966R)

  I don't know what could happen, my projects used to run and compile correctly, I changed the location of the screws in the computer in order to get the orderer and there is suddenly no longer works.
  One thing that is quite rare is the option to "Select the server compile" pop up after I press the botton to cancel.

  "LAbview FPGA: the compilation can be performed by the worker of the compilation." The SME worker of compilation are configured incorrectly for this compilation, or maybe a status error '--> I did something with it. "

  When I create another project that connects a simple addition of two constants, don't let compile me, then... This isn't for lack of screws.

  Thank you in advance, it is such a thing as boring.

  Best regards
  Miguel.

  Hi all

  In fact I solved. What happened is that the path of the compiler has been moved to a different folder, so Labview was unable to find it. Put in the correct folder once again was the key.
  It was a stupid question finally, but information is pretty confusing sometimes. I put it here in case other people need.

  Kind regards
  Miguel.

• The compiler bug? Var statement above the postcedes function being called external execution function definition

  Use Flash CS5 (AIR and, although this does not seem that it would be AIR bound) in Win XP 64
  

  
  

  I have a MovieClip symbol in my library with the identifier 'Puzzle10Piece10' with the following actionscript code attached to frame 1 of the single layer with the following actionscript code:

  Import 12345678910111213import;
  import flash.display.Sprite;

  var bmpSprite:Sprite = new Sprite();
  addChild (bmpSprite);
  trace ("*" + bmpSprite + "*");

  function addBMP(b:Bitmap):void
  {
  trace ("=" + bmpSprite + "=");
  BMP = b;
  bmpSprite.addChild (b);
  }

  I have the following text in a class AS file:
  

  If (name is "GoalCard")
  {
  var p10:Puzzle10Piece10 = new Puzzle10Piece10();
  trace (new Bitmap (p.getImages (). Hallway [1]));
  variableArea.addChild (p10);
  P10.addBMP (Bitmap (p.getImages (again). Hallway [1]));
  }

  Produces the following output:

  CLASS: PictureTools FUNCTION getImages() return [[object Object]]
  [object Bitmap]
  CLASS: PictureTools FUNCTION getImages() return [[object Object]]
  ========== null ===========
  Bland (out) lightbox FEATURE
  [object Sprite] *.

  The "trace (new Bitmap (...". "is only to show that I am sending a valid bitmap object to the function, I'll call you.
  

  This goes against my understanding of the pre-compiler and code execution order.  In my way of thinking, any creation of reference and memory related distribution is performed when the object is instantiated, and indeed that allocation, unlike C does not depend on code order (statement before use), although it is a command that can reach even the C pre-compiler.  If I understand correctly the compiler in Flash at all, it's not even a question of "order of the code"... the symbol is pre-compiled such that it exists... so that it can be instantiated, the variable would exist before the function would be "available" to be called internally or externally.

  Is my way of thinking to the coast, or is this a bug?

  at least since flash mx.

• False alarm: the compiler bug?

  This happens with CVI 2010 SP1.

  Compiling this code, I get "WARNING: Conversion from '__int64' to 'long' could lose data... ' on the 'z = y' line.

  Please note this line does not have any variable __int64.

  More strange: if I comment any line of the "case", the warning disappears: the warning when are present four or more instructions "box.

  However, the generated code works perfectly, to a quick test.

  #define A 0x00000000
  #define B 0x00000001
  #define C 0x00000002
  #define D 0x00000003
  
  #define MASK 0x00000003
  
  void CompilerBug()
  {
  __int64 x=0;
  
  int y,z;
  
      switch(x & MASK) {
          case A: y=0; break;
          case B: y=1; break;
          case C: y=2; break;
          case D: y=3; break;
      }
      z = y;
  }
  

  I will be happy if someone can confirm this behavior.

  Thank you

  At first glance, the warning seems to be false. The conversion from __int64 to long don't actually takes place. Instead, case expressions are converted long __int64. The behavior of the switch statement seems correct and therefore the warning can be ignored.

  We have not yet investigated the cause of this error, but you can follow the matter with bug ID 363456. In the meantime, it would be more prudent to ensure that your switch expression and case expressions are of the same type where we have not fully defined errors.

• Forms 11 g-error during the compilation of pl/sql block having retained a procedure call

  Hello

  I'm getting following error in trying to compile a when the button trigger pressed with a stored procedure call forms 11g R2

  Error on line 0...

  Declaration ignored

  Forms a button trigger (when the button pressed)

  ----------------------------------------------------------------

  do_nothing;

  Stored procedure: (10g R2 database)

  ----------------------------------------------------------------

  create or replace procedure do_nothing AS

  BEGIN
  NULL;

  END do_nothing;

  Note: This procedure works for sql as SQL Developer or plu sql tools.

  Concerning

  user10503016 wrote:

  After validation of this request, I did some tests more and found Forms 11g R2 need a minimum version of database - 10.2.0.4. Is that the reason?, because my version of the database is 10.2.0.1.

  Yes, one of the reasons.

  Hamid

• Error during the compilation of the LCCS SDK Flex 4.5 SDK samples

  Hello

  I'm new to Flex programming and exploring the samples provided as part of the LCCS SDK. I'm trying to compile the examples available as SimpleChatExample.mxml in the swf file using the Flex SDK 4.5 compiler (mxml.exe). But I get following error - could not resolve < rtc:ConnectSessionContainer > to an implementation of the component. Could you please help me to find the exact cause of this? This is to integrate the swf file that is compiled into an existing ASP.NET page and to check the feasibility.

  Please guide. Thank you.

  I recommend the following:

  http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7fcc.html
  

  and use the following syntax to reference:

  http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7a92.html
  

  or better still on the command line:

  mxmlc - help list details

  Normally, you will need to refer to this list of options available (even for compc), and then to formulate your command line options.

  Your order will be probably looks like this:

  mxmlc -library-path+=path_to_lccs_sdk/libs/player10 -source-path+=src src/MyApp.mxml
  

  Depending on your needs, you will need to play with "- include - libraries" and "- external - library-path" params as well.

  Hope that helps,

  Alex G.

• error during the compilation of a function

  Hello
  
  I want to write a function that would give me the name of the database.
  +
  CREATE OR REPLACE
  Getdbname FUNCTION
  RETURN VARCHAR2
  IS
  X VARCHAR2 (10);
  BEGIN
  SELECT THE NAME FROM THE X FROM V$ DATABASE;
  RETURN x;
  END;
  +
  
  but he gave me the following error message
  +
  5/30 PL/SQL: ORA-00942: table or view does not exist
  5/5 PL/SQL: statement ignored
  +
  
  If I wrote the anonymous procedure:
  
  +
  declare
  X VARCHAR2 (10);
  BEGIN
  SELECT THE NAME FROM THE X FROM V$ DATABASE;
  dbms_output.put_line (x);
  END;
  +
  
  This gives me the result:
  
  where am I going wrong to write the function?
  
  
  Thank you
  Sam

  Sam wrote:

  I want to write a function that would give me the name of the database.

  Why reinvent the wheel? Oracle already has the function. SYS_CONTEXT function with the DB_NAME parameter:

  SQL> SELECT  SYS_CONTEXT('USERENV','DB_NAME')
    2    FROM  DUAL
    3  /
  
  SYS_CONTEXT('USERENV','DB_NAME')
  ---------------------------------------------
  orcl
  
  SQL> 
  

  SY.

• Compilation of FPGA - real formal error on the cost of the port cannot be an expression

  Details:
  ERROR: HDLCompiler:192 - "C:\NIFPGA\jobs\BPO5kq2_O6tyN2U\OC4_Sine_Cosine_LUT_Constant_Amplitude_dash_optimised_vi_c.vhd" line 1408: real formal on the cost of the port cannot be an expression
  ERROR: HDLCompiler:854 - "C:\NIFPGA\jobs\BPO5kq2_O6tyN2U\OC4_Sine_Cosine_LUT_Constant_Amplitude_dash_optimised_vi_c.vhd" line 69: Unit ignored due to previous errors.
  File VHDL C:\NIFPGA\jobs\BPO5kq2_O6tyN2U\OC4_Sine_Cosine_LUT_Constant_Amplitude_dash_optimised_vi_c.vhd ignored errors
  -->

  The compilation happens to step "using the unit felt" but then stops soon after with a compilation error.

  The line in question (1408) refers to the output of a "Reinterpretation FXP" node with the text

  Cost => (others-online '0'),

  in the part of port of the code card.  This is the output of the FXP reinterpret node is directly connected to an indicator in a VI sub whose output is then entered directly at a crossing high multiply node.  The code is part of a cosine sine LUT I programmed.  She used to compile without a problem, but I think I know where is the problem.  In one case, I have used only the sine of output of the algorithm and theory, Xilinx can optimize away from the part of cosine.  I have two instances of this VI in my code and looking at those generating any errors, the output is associated with a cosine indicator.

  Cost-online s_Cosine_2434,

  It seems that the track is essentially optimized away, but the compiler, Xilinx has a problem with the flag being present on the sub - VI but the idnicator is not used anywhere.  As a result, the cost gets set to an invalid value.  I guess close to reinterpret it FXP at the exit of the Subvi is an important aspect of this problem.

  I think I know enough now to fix this (remove the path manually by duplicating the sub - vi), but it may be useful for future bug fixes feedback in the FPGA module.  It is not the first time that this kind of removal of incorrect code me has given problems, but this is the first time I could clearly identify the problem.

  Shane

  Hey Shane,

  Looks like someone filed a bug report on it a month or two ago. It's the CAR # 475397 if you want to check for it in the list bug fixed for 2014 SP1.

• Error, while the creation and execution of stored procedure

  Hello

  I'm creating a procedure stored and discovered during the compilation and execution of procedure.

  CREATE OR REPLACE PROCEDURE procTEST
  AS
  BEGIN
  WITH
  AS Report1
  (
  SELECT * FROM Employee
  )

  SELECT * FROM REPORT1

  END;
  /

  ERROR when compiling

  -------------------------------

  PROCTEST update procedure

  Errors: Newspaper the compiler check

  ERROR when executing

  ---------------------------------

  PROCTEST update procedure

  Errors: Newspaper the compiler check
  Error from line: 15 command.
  EXEC procTEST
  Error report-
  ORA-06550: line 1, column 7:
  PLS-00905: object SYSTEM. PROCTEST is not valid
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  06550 00000 - "line %s, column % s:\n%s".
  * Cause: Usually a PL/SQL compilation error.
  * Action:

  Hello

  user13360241 wrote:

  I want to insert values into the table tmpemployees.

  Insert into tmpemployees

  Select * from Report1

  CREATE OR REPLACE PROCEDURE procTEST
  AS
  BEGIN
  WITH
  AS Report1
  (
  SELECT * FROM Employee
  )

  Insert into tmpemployees

  SELECT * FROM REPORT1

  END;
  /

  I see.  Then, there is no need to use the PL/SQL.  All you need is:

  INSERT INTO tempemployees

  SELECT *.

  OF REPORT1.

  (assuming that the columns match Report1 tempemployees... It is best to explicitly list the individual columns, like this:

  INSERT INTO tempemployees (employyee_id, first_name,...)

  SELECT (col_1, col_2,...)

  OF REPORT1.

  )

  If you need to use the PL/SQL for a reason, you could use the exact same INSERT statement in PL/SQL:

  CREATE OR REPLACE PROCEDURE proctest

  AS

  BEGIN

  INSERT INTO tempemployees (employyee_id, first_name,...)

  SELECT (col_1, col_2,...)

  OF REPORT1.

  END proctest;

  /

  DISPLAY ERRORS

• error in the procedure

  Hello
  
  Please help me to fix errors in the compilation of the following procedure, working with 11g.
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  1/37 PLS-00103: encountered the symbol "(" quand attend un de la) "
  Next:
  := . ), @ % of default characters
  The symbol ': = ' has been replaced by "("pour continuer.) "
  
  13/39 PLS-00103: encountered the symbol "(" quand attend un de la) "
  Next:
  , of in bulk
  
  ----------------------------------------------------------------------------------------------------------------------
  
  
  create or replace procedure getvertices (id IN varchar2 (5))
  
  is
  
  type ref_cur is REF CURSOR;
  ref_cur c_v;
  
  type myrec is RECORD (RID number, x, y I number, varchar2 (5));
  REC myrec;
  
  Start
  
  Open c_v to select row_number() over (partiton in order of idarpt to idarpt) RID, t.x, t.y XY, testpoly idarpt t, table (sdo_util.getvertices (a.geometry)) where a.idarpt = id;
  
  loop
  extract the c_v in rec;
  dbms_output.put_line (rec.rid |) » --'|| Rec.x: '-' | Rec.y: '-' | Rec.i);
  end loop;
  close c_v;
  
  end;

  I think there may be a conflict with the name "id" parameter Try to use something else instead, like "p_id" as shown below.

  SCOTT@orcl_11gR2> create table testpoly
    2    (idarpt       varchar2(5),
    3       geometry  mdsys.sdo_geometry)
    4  /
  
  Table created.
  
  SCOTT@orcl_11gR2> INSERT INTO testpoly VALUES(
    2    'PQRD',
    3    SDO_GEOMETRY(
    4          2003,
    5          NULL,
    6          NULL,
    7          SDO_ELEM_INFO_ARRAY(1,1003,3),
    8          SDO_ORDINATE_ARRAY(1,1, 5,7)
    9          )
   10  );
  
  1 row created.
  
  SCOTT@orcl_11gR2> CREATE OR REPLACE PROCEDURE getvertices
    2    (p_id IN VARCHAR2)
    3  AS
    4    TYPE ref_cur IS REF CURSOR;
    5    c_v ref_cur;
    6    TYPE myrec IS RECORD
    7        (rid     NUMBER,
    8         x     NUMBER,
    9         y     NUMBER,
   10         i     VARCHAR2(5));
   11    rec myrec;
   12  BEGIN
   13    OPEN c_v FOR
   14    SELECT ROW_NUMBER () OVER (PARTITION BY idarpt ORDER BY idarpt) rid,
   15             t.x x, t.y y, idarpt
   16    FROM   testpoly a,
   17             TABLE (SDO_UTIL.GETVERTICES (a.geometry)) t
   18    WHERE  a.idarpt = p_id;
   19    LOOP
   20        FETCH c_v INTO rec;
   21        EXIT WHEN c_v%NOTFOUND;
   22        DBMS_OUTPUT.PUT_LINE
   23          (rec.rid || '--' || rec.x || '--' || rec.y || '--' || rec.i);
   24    END LOOP;
   25    CLOSE c_v;
   26  END getvertices;
   27  /
  
  Procedure created.
  
  SCOTT@orcl_11gR2> show errors
  No errors.
  SCOTT@orcl_11gR2> exec getvertices('PQRD')
  1--1--1--PQRD
  2--5--7--PQRD
  
  PL/SQL procedure successfully completed.
  

• Error 2013 CVI: the compiler has run out of memory.

  Hello

  I get this error in a source file, I want to debug:

    1, 1   Error: The compiler has run out of memory.
        1, 1   Note: You may be able to work around the problem:
        1, 1   A. Set the debugging level to 'no run-time checking'.
        1, 1   B. Split your source file into smaller files.
        1, 1   C. Enable the 'O' option for your source file in the project.
        1, 1   D. Move large static data structures into new files and
        1, 1   enable the 'O' option for the new files.
  

  Options A and C turn off debugging AIDS especially, and I don't dare edit.

  So no possibility to increase the memory limit?

  
  

• The compilation don't installed tools not error message

  I installed 11_5 Xilinx tools in C:\nifpga\program\xilinx11_5.  When I Isaiah to compile my FPGA code in LabVIEW 2011 SP1 I get the error that the build tools are not installed, see the attachment.

  How can I get LabView to see the Xilinx tool, since he did not automatically?

  Hi, Paul.

  The problem is probably caused by an incompatibility between versions of LabVIEW and Xilinx tools. Check the following KB to show compatibility.

  http://digital.NI.com/public.nsf/allkb/A4B20D58C051DFB386257A56007BB0B2

  Best regards;

  Pedro M.

• Error occurred when using the compiler CAP

  I developed a J2ME MIDlet program that can run on the mobile phone. Now, I want to run it on the BlackBerry. I tried to use the compiler CAP to change the .jad and .jar format .cod files. However, he returned the following error message.

  Error! : offset of field too big for: cmdJobDetailGoToTop

  It should not be a java error.

  Someone has seen this before and how to solve?

  Thank you very much

  This error indicates that the class containing the data member cmdJobDetailGoToTop has too many data elements of members where the upper limit is 512 words.  It is worth noting that the number of double and long for two words in this upper limit.

  Finally, the members of the classes of database would contribute to this indictment as well.  To resolve this problem, you must reduce the number of data items in this member.

• Fehler bei Videovorschau - Fehler beim create movies. (Error in the video Preview - 'film compilation error. Unknown error.)

  Hallo,

  ICH habe seit Kurzem problem beim Exportieren aus Premiere Pro 2015.2.

  ES opens sich ein Fenster mit found message:

  "Fehler bei Videovorschau - Fehler beim create movies. Unbekannter Fehler . »
  
  As sharps Fehlers habe ich meinen Rechner neu aufgesetzt, aber er is experienced.

  Ich weiss, wie also provozieren kann ich jetzt Aber. Wenn ich beim export die Zielbitrate [Mbps:]

  Auf unter 10 stelle tritt der Fehler auf.

  =======================================================

  Hello

  I recently problems when exporting from Premiere Pro 2015.2.

  It opens a window with the following message:

  "Error in the video Preview - 'film compilation error." Unknown error. ».

  Because of this error, I restarted my computer, but he persists.

  I know now how I can cause the error. When I export the movie and put the target bit rate [Mbit / s:]

  less than 10, the error occurs.
  
  ==========================================================
  
  Windows Pro 10
  First Pro CC 2015.2
  Intel Core i7 - 4930 K CPU 3, 40GHz
  32 GB of RAM (checked with MemTest, no error)
  NVIDIA GeForce GTX 780 (game ready Driver, Version 368.39)

  With the 2015.3 version, the problems seem to have disappeared.

• Lumetri color is "film compilation error. Unknown error' all the time...

  I have problems to compile anything if I use the Lumetri color in first Pro CC 2016 9.2.0

  If I remove all Lumetri color on all plans, it compiles without any problem. If I use any kind of color Lumetri - presets or custom color Lumetri it's for me

  "Film compilation error. Unknown error. "if I try to render or export/compile.

  It matters little if I just export from in the body or the SOUL use.

  At first I thought it might be some errors with the media, but after trying to remove the clips one by one, he always made the mistake. Finally, I removed all the effects and it worked.

  If I put Lumetri color on a single clip, it does not.

  It's very frustrating.

  My system:

  Windows Pro 10

  I7 - 4930 K 3.4 Ghz

  64 GB OF RAM

  NVIDIA GTX 570

  4 x 4 TB HARD drive

  Clips of Panasonic GH3 GH4 - GH3 vlclips and 50 1080 P the GH4 is 4K 25 p. All places on the timeline with 1080 P. 25, have made many films with mixed without any problems before - looks like this error came after the latest organization update?

  Clues?

  UPDATE: I managed to get the sequence exported using the red giant seems only instead of Lumetri. I had jumped to almost looks like after having to get used to Lumetri, which I find easier to adjust when editing. Have the old edition, but consider the upgrade to bersion last, otherwise Lumetri works more. I wonder if this could have something to do with my Nvidia driver? Old eyes do not use the GPU but only the CPU... so maybe something related to the GPU for my GTX570 driver?

  / Morten

  Just look at the GTX 570... «With 480 CUDA cores...» " ... I think that this is your problem, really.

  Plus, the recommended minimum CUDA cores is to stay more than 1,000. Simply, this card doesn't have the power to handle the most recent Lumetri. The rest of your machine looks very good, I think you just need to move up to say a 970 at least. It would balance the rest of your machine better.

  Among the major warnings of building a computer for applications video Adobe is 'balance'... with the most amazing CPU and 256 GB of RAM, but only using a disk 5400 RPM, for example, is not a machine "balanced". 570 isn't near the capacity of your machine... and PrPro... can use.

  That's why he better just software.

  Neil