Similar Questions

• Layout error in the dashboard of the hosts.

  Hello

  Just we have been reclassified foglight FMS version 5.6.4 for 5.6.10, after upgrade, one of our child fms showing the error in the dashboard hosts, we are not able to see the guests, please check the screen shot and could you help me on this.

  

  Thank you

  Ashok

  Hey Ashok,

  I think you should raise a service request with the support team.  You can get them by pointing your browser to software.dell.com/support.

  Best regards

  David

• My PIXMA MG5320 has error U052-' the type of print head is incorrect. Install the correct print head

  My printer has stopped between different documents with the printing error U052.  He has said, "the type of print head is incorrect.  Install the correct print head. "I couldn't find help on the support page.  A YouTube video showed me how to get out of the print head and clean it manually.  I did this and reinstalled my ink cartridges.  I still have the error.  I can't align my printhead.  Buy a new print head or I have to buy a new printer?  I love this printer!  He is a year old.

  Hi Brooks14,

  If your printer was purchased less than a year, we will be able to replace it under warranty without having to buy a new.  Since you've already tried it replace unsuccessfully, I recommend to use the link contact us to contact our support staff that can go through your warranty options

• Microsoft Visual C ++ Runtime Error with the Dell 962 printer

  The operating system is Windows XP on startup, I get an error message, to load the driver on the Dell 962 printer.

  The printer prints, however other features like scan do not work.

  I have re-charge the driver with the same problems.

  Also, if I try to open the Dell 962 All-in-One-Center, the error reads Mircosoft Visual C ++ Run Time Error.

  Hello 1946mike,

  Thank you for your message.  Try to remove the software from the Dell printer and the driver, reboot and reinstall.  After you remove the software, click HERE to download and install the driver from the last and utility.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Get this error on the dashboard for the last 2 days: Please try again later we are working to improve your experience of the Enterprise Dashboard.

  When you try to run the company, I received this error for the last two days.  I have tried using another browser and ended in the same results.

  Please try again later

  We are working to improve your experience of the Enterprise Dashboard.

  Hello

  Your proof of cloud creative's 'VIP' instead of the company, so you would not normally manage your CC on the Enterprise Dashboard, but you had some Digital Marketing rights so that's why you have a dashboard.

  I am informed that currently some adjustments are made to your dashboard for Digital Marketing and that it should end soon.

  In the meantime your creative team of cloud management should be available through creative.adobe.com

• Error on the dashboard

  We get the error while trying to open the dashboard in tests of approx. It works very well in dev. Here is the error:
  
  Dashboard display error
  Assertion failure: pRoot on line 107 of the /net/sdchs20n529/vol1/users/anabuild/views/nightly/Tue/101341/RH_Linux/vobs/090414.1900/analytics_web/main/project/webxml/xmldocument.cpp
  Details of the error (javascript:void(null))
  Error codes: OQ78YWIW
  
  Can someone help me with this problem?

  Its a known bug, see this blog for a workaround:

  http://obiee911.blogspot.com/2013/02/OBIEE-10G-error-from-Dashboard-layout.html

• Error during the generation of print documentatin HR 7

  Dear Sir.
  While generatig printouts, the following message appears: -.
  
  "Microsoft Word seems to not respond, you want to continue waiting for an answer?"
  then "the Macros in this project are disabled, please refer to the online help.
  then "Macro VBA registry version is incorrect, please re install printed documentation.
  
  Thank you.

  I discovered the reason why, macros have been disabled in my word

  Thank you.

• I'm more able to print messages from Thunderbird. By clicking on the "print" key does nothing. Clicking on give the preview before printing a printer not found error message.

  I have recently installed Windows 10 on my machine (upgrade to 8.1)
  The "print" button does absolutely NOTHING. A printer NOT FOUND of error occurs when I try to get a preview of the message.

  All of the suggestions.

  the configuration editor allows you to change the entries in print.printer to the default values * right click and reset

• When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried the stuff even printing from the Internet

  When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.

  Hello bdoolen, please try to reset firefox and see if that can solve the problem...

• Error in the external employment when Google Cloud Printing Service: HP Laserjet 1102w Professional P

  I set up my printer and associated with Google Cloud Printing. I shared the printer with my daughter who is on a chromebook. When she tries to print, the printer is here and the job is sent to bu ePrint I get an error saying: "error in the external employment service". No documents are able to print. Google says that it is a problem of HP.

  I deleted the printer on my behalf of girls and it re-shared and associated again, but this is not enough. On my Printers page, my daughter's google account is identified as "authorized to print." But it still does not work. Any ideas?

  Thanks Jerends. I had checked all these options and none worked, so I deleted the printers and re-associates a few minutes. That did the trick. Just as the helpdesk CTR-ALT-DEL trick.

  Strange thing has been/is that he used to work, but something happed to raise this issue.

  In any case, thanks for your help.

• Error in the printer "document in the ADF.

  Original title: Canon injet 310 series

  All of a sudden, my printer shows this error when I try to print "document in the ADF.  When I press ok to delete it, the same message appears.  What is an ADF?  How can I fix?  Help, please.  Thank you.

  Linda, in addition to "stir" around with the paper-feeder(open the drawer, take out the paper, put it back in well aligned) and wiggleing everywhere elsewhere where it is possible, I'm ideas! Sorry! Don't forget: it's obviously a kind of jam: just so push, shake and 'free' the printer...

• I can not print complete E-Mail due to the space occupied by the personal dashboard. The right side of the screen is taken by the dashboard. How can I remove the dashboard, that is to say, the column to the right of the screen?

  There is not enough room for the message between folders on the left and the (advertising) dashboard on the right.  Therefore, I often use the slide bar on the bottom of the screen to read the entire lines of the message.  For this reason, I can not print a full e-mail.

  How can I eliminate or reduce the dashboard?

  The ads are not visible under the eyes. Click the button in the toolbar of the message header in the reading pane:

  

  Le The full view button

  To print the message alone, click the three dots in the command bar and select print.

• "20 error" when I try to print in PDF Quicken format - which has been installed on the computer of orig

  I just got computer and "Quicken PDF Printer" has been installed but I can't print without computer paper.  I get a message titled "20".   Help

  Hello

   
  See the link below to fix the problem.
  
  Error codes: '-20' and "-30"when printing to the printer PDF of Quicken."
  http://Quicken.Intuit.com/support/help/printing/error-codes---20--and---30--when-printing-to-the-Quicken-PDF-printer/GEN82190.html

• How can I fix this error msg? your default printer must support a minimum resolution of 300 x 300 to use the shape tool. I am trying to save in PDF format.

  How can I fix this error msg? your default printer must support a minimum resolution of 300 x 300 to use the shape tool. I am trying to save in PDF format.

  When you have what you want to save the selected PDF file, make sure that you press properties, and set the resolution in the settings.  PDF files themselves have quality settings, (print quality, Web quality etc) then make sure that you have the right to a game if you plan to use the "print" function to save in PDF format.

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!