Error: Incoming replication failed

Similar Questions

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  Hello

  Thanks for asking!

  You cannot install updates Windows and error migration was not able to transfer.

  The problem can occur if the update of the components are damaged.

  Is the message of exact error that appears?

  I suggest you to reset the update components and check if the problem persists.

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

• I'm moving to Windows XP, Vista, I got an error stating - Int failed: E:\i386\asms

  E:\i386\asms. error
  
  

  I'm moving to Windows XP, Vista, I got an error stating - Int failed: E:\i386\asms. and told me I/O device missing and do anythging else used.

  Hello
  Unfortunately, it seems that you are using the Windows XP CD is corrupt and therefore unusable for installation.  Please see: How to replace lost Microsoft software
  Kind regards
  Chauvet J.

• Could not get the email, get the error number: 0x800CCC0E, failed connection

  Receive a msg of error Outlook Express (XP) as shown.  Just started recently. Must reboot to fix, then it repeats. Any difficulty?

  Receiving the msg to Outlook Express error as follows: failed to connect to the server. Account: 'ted.tedramsdell', server: 'smtpout.secureserver.net', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10061, error number: 0x800CCC0E.

  Any help will be appreciated.

  This account worked before without any changes:

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.

• Opening photos I get the error "Server execution failed" so it displays the link to the windows photo gallery is broken

  I lost the ability to click on a pphoto in the photo file and opened it. I get the error "Server execution failed" it seems that the link to the windows photo gallery is broken. If I choose the open arrow and click the Windows Photo Gallery, and then the picture will open. How to restore the link so I can click on the picture and may he open it?

  original title: opening photos

  Looks like you have a lot more problems of system
  implies that this can be resolved in this forum.

• When you start Windows Media Player I get error: "Server execution failed".

  Hello

  When I try to start Windows Media Player by double-clicking an audio or video file, I get the error "Server execution failed" for this file. Can someone tell me what this means and what I can do about it?

  Thank you

  Christi

  Hi Christi,

  You may receive this error if you try to open a file media shortly after the closing of Windows Media Player (WMP).  When you close WMP, the user interface is closed immediately, but WMP continues to be in a State of "shutting down" for a few seconds, and the process is still in activity during this period.

  To avoid this problem it should be enough to wait a few seconds before Windows Media Player opens, 2 seconds at least.

  Bobby

• PC Backup doesn't work no-internal error: Server execution failed - error Code 0 x 80080005

  Hello

  I use Vista Business SP2.

  I'm having a problem with Windows complete PC Backup. When I click on the "create backup now" trying to create a full backup of the computer, spends about 15 seconds and then this message:
  
  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)
  Please check the configuration of your system and try again.
  
  I click on ok, and the message appears once more.

  I'm trying to save on the same disk external I used for backups. Backup of the files on this drive works fine.

  Here are a few things that may be useful to solve this problem:

  1. I recently uninstalled and tried to reinstall Sophos Anti-virus, but I can't reinstall.
  2. My computer has been restored using the backup of the computer in the past. I have not saved since.
  3. I recently changed the permissions/owner on the external hard drive that I support up to.

  Thanks in advance.

  If you have replaced TrustedIstaller with something else, which could very well be a part of the problem.  It is a user of the system and it can be called by the name of some programs and if she isn't here so the program does not know what to do.  I don't know how to solve this problem - I don't think add that a new administrator account to the user with this name will do (because it will have a different code).  In my view, that a re - install is the only way to solve this particular problem.

  Here is an article on the fixation of 4201 event viewer error: http://www.vistax64.com/tutorials/110886-event-viewer-error-4201-a.html but I wouldn't bother with this if you have an Installation of Windows Vista genuine disc.  Come back if this disc does not (and I don't think it will be necessary).

  CONGRATULATIONS on finding a disk for Installation of Windows Vista SP2 genuine - I guess that it's 32-bit (like your system).  It is exactly what you need - a commercial version.  The OEM versions do not work because they include device drivers specific to their computers and those who will hose your system unless they have exactly the same system for (and I don't think you can do an upgrade by using the OEM versions - at least not all of them - just a clean install {although I found a HP and it has used to update my XP system crashed then) ({I was waiting the disc of real update that I bought from Dell - not exactly kosher but finally in compliance}).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side (by copy and paste if necessary even if you can't use the full backup feature). If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install.  What version of Vista do you have currently?  I think that the drive will work with any version of Vista (they contain probably all versions on them and that they install is governed by the Code of the product used - but I have never actually tried using a different version of disc - I only heard this said by people who seem to know what they're talking about).  The fact that it is SP2 means that you won't have to uninstall all the Service packs that is even better.  I REALLY hope it works for you.  Make sure you use the UPGRADE option or you're going to do a clean install.  If the upgrade option is grayed out, it means that it will not work (but I don't think that this will be the case).

  If the drive works (and after installing all updates), then there should be nothing to fix on your system - it should work like new.  You should be able to do your backup with no error message.  Have no other problems.  This will fix the problem with TrustedInstaller so.  I feel confident thiis will work.

  I mentioned that Acronis because first of all, it's the best backup software and secondly because there could be a workaround, because it does seem like there was another solution because you do not want to delete this special software (but now that you have the disc - which is debatable – although it is still the best software {even though) ({, as you say, it's not free}).

  As far as Windows7 goes, I refer you to the Windows7 Forum at: http://social.answers.microsoft.com/Forums/en-US/w7install/threads where the people who specialize in installation, the upgrade, and activation Windows7 will be more than happy to help you in the process.  I have Windows7 (my computer is not compatible and it is too costly to update since it's several components that need to be changed and my other computers are even older, so he has no hope here - I just have to wait until the "I need a new computer" but strikes me to new, but that will probably not for one or two years).  To be honest, I wouldn't intentionallly update at this point even if I could because I always wait a while before installing a new OS (generally up to the publication of its SP1 and in the case of Vista its SP2) to let other people work the new bugs - and there are some despite what you see in the ads.  Spend time on Windows7 forums, if you don't believe me.  Out of the box, she seems to be better than Vista did (which was awful) but there are still issues that need to be addressed - I'll wait instead until it is more stable (and a bit of my software is not compatible and I don't want to have to go out and buy all these updates at the same time (, because it will be too expensive overall).  But if you want to upgrade, which is perfectly fine - thousands of others do (always, especially since Vista has problems after all this time) and I totally understand.  This is just my own personal bias and procedure - I don't recommend to my clients that I recognize it as being just a personal preference rather than one-piece objective advice.  Before installing Windows7, make sure that your system is ready with the Windows7 Upgrade Advisor to: http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx - you should perhaps update or remove some software and may not even need to upgrade certain hardware - better know before you start (especially if you go x 64 which I assume that your PC is able to treat - mine isn't).

  I hope this helps and wish you all the best in your effort to make the repair/improvement of the system.  I hope it works.  Remember that you must use your own product key to activate the software if necessary.  If it does not automatically have to activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain that you had a problem and you need to reinstall the OS but it's the same PC.  They should give you a code to enter on this screen to activate Vista.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error starting program: failed to initialize the graphics system

  I just upgraded to Windows Vista 64 bit to Windows 7 64 bit.  I now have problems of execution of Roller Coaster Tycoon 2.  I get an error that says: "failed to initialize graphics system '.  I think the problem has something to do with the program you want to run in 256 k colors.  I installed the new video drivers on the Dell Web site, but it did not help.  Any ideas?  Thanks in advance.

  See if you can use a Compatibility Mode setting to run in 256 colors?

  How to troubleshoot a program that does not run as expected once it is installed on Windows Vista
  http://support.Microsoft.com/kb/931362/en-us

  Make older programs in this version of Windows
  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Windows Vista Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/details.aspx

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

• Error: Printer Validation failed

  Hi guys, new here.

  I'm trying to print via Microsoft Word on my printer HP Photosmart 6C100 series of my laptop HP Envy of m6 through a wi - fi connection, but by clicking on the printer 'HP ePrint', I get the error 'printer Validation failed. I use Windows 8. If someone could help I would be very happy, thank you.

  Ross

  This printer does not work with the ePrint driver.  That's why you get this error.  I don't really know why it's even pick up the printer.  To get the printer to work with your computer, you can use the InOS driver that is built into Windows 8, or you can use the full download of software and the driver for HP.  I'll link the download below.  The InOS driver should just pick up and install the network printer without telling you.  If this is not the case, try to install the software below to print and scan with the C6180.

  HP Photosmart full feature software and drivers

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• During the installation of adobe in Win 7 products I get this error: "certificate authentication failed.

  Windows 7 Edition using Home Premium.  Had Adobe Reader and Flash work and then had problems to update.  Uninstalled all Adobe products and now cannot re - install.  I get the error "certificate authentication failed.  Other proposed help sites enter gpedit.msc but it is not installed on my machine (not available with Win 7 Home Premium, I understand, $220 upgrade to Ultimate... :-(

  Hello

  Step 1: Run the fixit to solve the problems of the uninstalling and reinstalling:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2: I suggest to try a clean boot and install.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startup mode

  To further support contact Adobe support to improve assistance to this topic:

  http://forums.Adobe.com/community/webplayers/flash_player

  http://www.Adobe.com/support/Flash/

  The video problems with Internet Explorer

  http://support.Microsoft.com/kb/2532294

  It will be useful.

• When I tried to download my free tril of Adobe Pro, I get an error message "http failed"

  When I tried to download my free trial of Adobe Pro, I get an error message "http failed"

  Adobe is the name of the COMPANY... you hear Premiere Pro or Acrobat Pro?

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2203126