Error installing the camera Kodak Easyshare failed on Windows 7
Original title; Photos of transfer problems. Device is not install properly
I bought a new Kodak easy share camera. When I plugged in my computer transfer pictures USB driver said that installing the unit has failed and the camera does not appear on "my computer" as a removable as it should. I plugged into the Mac of my mother and went right in the Setup program, as it is supposed to is not my camera that is the problem. Any ideas?
Hello
1. What is the exact error message you get?
2 have you installed the software for the device?
3. What is the exact make and model of the Kodak camera?
You can check if there are errors appearing in Device Manager (usually a yellow exclamation next to it).
Open the Device Manager
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
I also you suggest to install the software that came with the device and then try to plug in and check.
You can download and install the application from the link below:
KODAK EASYSHARE Software - WINDOWS operating systems
http://support.en.kodak.com/app/answers/detail/A_ID/36670/selected/true
You can also go through the help of Easyshare software to:
http://resources.kodak.com/global/en/service/help/easyShare_v8_2/Webhelp/EasyShare_Software_Help.htm
Tags: Windows
Similar Questions
-
I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?
If the installation program itself fails to open and run. Download it again maybe your current download is corrupted. Also, what OS you are using and you are an administrator with permission to install.
-
Windows will not start since the attempt to install the camera software?
Hello, I tried to install the camera software, when I did it said my computer to shut off and re satart to complete the installation, when I did a blue screen came up saying that windows had been shut down to protect my computer (not this one). He says to re start computer I did who bought the safe mode/start windows normally screen etc, but nothing's going to restart windows, it starts at, then returns to the blue screen again. Can anyone help please? Thank you. Trevor
Hello
· What software have you tried to install on the system and what is the name of the program and where you installed it go?
· What is the exact error message that you meet in the blue screen?
· You're able to boot in safe mode?
Method 1:
Step 1:
I suggest you try and boot into safe mode. Follow the steps mentioned below.
a. restart and keep tapping F8 until you reach the start menu.
b. Select safe mode and press ENTER.
Step 2:
Do a restore system, safe mode and check. Follow the steps mentioned in the article below.
How to restore Windows XP to a previous state
http://support.Microsoft.com/kb/306084/en-us
Method 2:
I suggest you to try and initiate the last known good configuration. Follow the steps mentioned below.
a. restart and keep tapping F8 until you reach the start menu.
b. Select last known good configuration and press ENTER.
Method 3:
I suggest to do a restore of the system from the recovery console and check if you are able to boot to the desktop without any problem. Follow the steps mentioned in the article below.
How do I recover from a corrupted registry that prevents Windows XP startup
-
Cannot install the camera Canon Power Shot A85 on Windows 8
I used Canon camera digital solution disk, ver.17.2 to install my Canon Power Shot A85 on my computer Windows 8. The camera doesn't
install, just ZoomBrowser EX4.6.
Hi Gordon,.
It would be great if you can provide more information about the issue.
(1) what exactly happens when you install the camera Canon Power Shot A85 on Windows 8?
(2) you get an error message? If Yes, what is the exact error message?
(3) you have any previous/old drivers of the device and the associated software installed on the computer?
(4) did you try to install the latest drivers and software on the Canon site?
The Canon Web site shows that there is no Windows 8 driver for this camera model. The driver may be either included in the operating system, or you may not need to pilot. You can click on the given link and check details:
Note: Select the operating system and check the latest drivers available.
But because the device does not work with the drivers built into Windows 8, it would be preferable to contact Canon Technical Support for assistance.
Hope this information is useful.
-
Re-installing the camera application
I just got a Windows 8 Surface RT Tablet and I accidentally uninstalled the camera application, so I was wondering how can I re - install? Can you please explain step by step? Thank you!
Hi Eva,
To install the camera app, you can follow the steps provided.a. on the start screen, press Store to open the Windows store.b. open the bar and charms on the search bar, type "camera".c. press the install button.You can also check if the camera application is present in "your apps".Reference:Apps in the Windows storeHere are the answers to some frequently asked questions about the camera application and troubleshooting of the webcam:Reference:App photo and webcams: FAQHope this information helps. Response with status so that we can help you. -
I downloaded and installed the camera Raw 8.8 and ORF files that will always open in Lightroom 5.7. The files were made using the new Olympus E - M5 II, who is on the list of supported devices. When I run Lightroom and check the on the screen, it says it's Lightroom version 5.7, but Camera Raw 8.7 despite my having upgraded to 8.8. I use a MacBook Pro with OS 10.7.5 Please advise on how to import and use ORF files in Lightroom.
The files were made using the new Olympus E - M5 II, who is on the list of supported devices.
Yes, this camera is supported by Camera Raw 8.8.
Camera Raw plugin | Supported devices
However, the required 'Version of Lightroom Minimum' column is empty. Lightroom does not yet support it.
Like the so-called Warunicorn, Lightroom does not use the Camera Raw using Photoshop plugin. It uses its own Raw conversion engine so you have to wait for an update of Lightroom separate for this camera edit Raw files in Lightroom. Or use the DNG Converter and work with the DNG in Lightroom.
-
When I try to install the CC apps they fail to extract to half way through. How can I fix it?
Check your running process (when the installation crashes) using adobe. to end this process and continue the installation.
-
is it possible to install the camera raw in offline mode?
I tried to download and install the camera raw plugin in a PC which is always offline for security reasons (it contains data of my clients).
However, when I try to install the available page file downloads, all I get is a guest "this download is not available for you", probably since my PC is unable to download the necessary components.
Y at - it a link to download the full installer, offline for camera raw 7.1 (or later version)?
Frodo
Hi MRPin1963,
Please find the link to download camera raw: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows.
Kind regards
Romit Sinha
-
I can't install the latest iTunes on my pc windows 10.
I can't install the latest iTunes on my computer windows 10. I tried everything according to this: https://support.apple.com/en-us/HT201668. The error that says: "there is a problem with this windows package install." "A program required for this install to complete could not be run. He does at the end of the installation. What should I do? (Sorry for my bad English)
General advice for troubleshooting when iTunes is unable to properly install (and reinstall or repair it does not) are to remove not only iTunes, but all the components, restart, remove the target installation files and reinstall. See excellent iTunes for Windows troubleshooting page located at turingtest2:
Troubleshooting problems with iTunes for Windows updates
especially the section: removing and reinstalling iTunes and other software components
It also includes a section on the download of iTunes: iTunes installers
-
install the printer driver HP Laserjet 1020 windows 7
Hi all
I am here to share my idea to install the printer hp laserjet 1020 in windows 7.
There no driver for windows 7 until mid-November.
I installed the driver for laserjet 1020 on windwos 7, here is the method to install the driver of windows 7 for laserjet 1020.
1. 1st download all laserjet 1020 base of the printer driver for windows vista. You can it to the bottom of this link
2. After you download the driver for vista check it out same exe file with winrar and then go to Device Manager, then HP laserjet 1020 which is indicated as a device unknown and do right click on it and after this update the driver
3 and after that go to the folder where extarct vista driver exe and select it.
novel I ran no exe file.
Thanks for reading. hope it will work for you
4 and it will be installed without any problem like me.
take care of all.
Mokhtari
Edit by Katie_H: fixed broken link
Hello, again and again
Here I downloaded the HD video to see better the HP Laserjet 1020 driver Windows 7
If you have any questions please conatact me through yhis post or respond to it.
Is this useful? Please let me know
-
I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?
(1) temporarily disable your security/antivirus software
(2) download iTunes from the official source: http://www.apple.com/itunes/download/
(3) try to reinstall
(4) turn on your anti-virus
-
Where to install the IEE 802.11 g for Windows Vista?
Where to install the IEE 802.11 g for Windows Vista.
It's for the wireless, as long that you install the latest driver for your wireless manufacturer, it should install. Note that your wireless network must support this standard in wireless hardware.
If you update your Windows, it could install too last driver update as optional.
-
How to install the HP LaserJet P2015 printer in Windows 7!
Hi all!
I'm luck using windows 7-32 bit. I would like to install the printer HP LaserJet P2015 in Windows 7, but I can't install it because during installation, it could not get. In fact, I can install it on Windows XP without any hindrance, but now I've upgraded to Windows 7 32 bit. Could you tell me what to do to solve it?
Thank you very much and I look forward to hearing of all.
My best regards,
CHANCE
Hey good LUCK.
The printing of your driver functionality is prodided by the HP Universal print driver.
You can download the driver by clicking on the button to download from the link below:
If you may find it difficult to understand all the steps of the installation, you will find full details below:
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02536202#A6
Please let me know of any necessary clarification.
Sincerely,.
Shlomi
http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02536202#A6
-
My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.
I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.
I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.
I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n
I need step by step instructions on this Yes please treat me like a fool!
Thank you
Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)
After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!
-
HP dc 7800 how can I install the driver for serial port pci Windows 8.1
HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help
Hello:
Download and install the W7 AMT driver.
Maybe you are looking for
-
Why Firefox requires the SMS permissions?
I use the beta for android version string and the last update requires SMS permissions but does not explain why. Someone tell me what "characteristic" is for?
-
eStation C510a Zeen problems-broken Scan &; Apps does not print
I have 2 new problems with my zineb: 1. we will not analyze on an SD card. It will preview the analysis but the locks upwards when you press the scan button. 2. Printing apps won't work. They eject a blank sheet of paper. 3. still no sign up with e
-
is it because it comes with so many programs and files? Thank you
-
Error code 0xc0000005 whenever I try to launch my programs,
.. as record cleaning tool, uninstall some programs (like 4sharedsync), open outlook. I don't know what to do? I have windows vista. I could get my outlook open in safe mode, when I opened my account gmail or yahoo, that I can not add attachments. Th
-
HP Envy 4500 cannot connect wireless to the printer
Recently I bought HP Envy 4500 printer. Connected to my router ok TP-Link3631 and have successfully printed from android phone and portable computer connected wifi but cannot print wireless from the office, running XP Pro, but allows you to print via