ERROR LOG RE1000
HO
RECENTLY I boutght the RE1000 extender
Since the I ve, then two questions of continuous disconecctions and many errors of transmission (log).
I move the Extender until I found a place that set the discconections... but the other problem is and I don't know what to adjust or twek...
the log show me this
Number of packages: | |||
Envoy (TX): | 5619550 | ||
Filed: | 0 | ||
Received (RX): | 5451403 | ||
Filed: | 0 | ||
Errors: | 158057 |
is there a way to reduce the number of errors... I have a mixed network, it is common?
Thank you
Check your RE1000 settings. There are two signal meters. They say 'the signal intensity' and the other says "signal quality". They all have two need to have at least 3 bars. If they don't have at least three bars, you will need to find a better place for this.
Tags: Linksys Products
Similar Questions
-
How to create an error log file
Hello
I want to make an error log in the format below:-
Date error error number
Description 1/1 3243543 error 01:00
- - - -
- - - -
The error log should be created automatically after execution of a particular program. (only date and time when no error occurs).
Can someone give me the samplecodes to do that?
-
Xcopy - need of path of the error log file
Hey Microsoft,
I run the xcopy command:
xcopy/C/H/E "C:\Original" /e > "C:\LOGFILE. TXT"2 >"C:\ERROR_LOGFILE. TXT ".
The error log gives me this result:
"File creation error - the system cannot find the file specified."
But I need the path of the file that caused this error.
How this is done?
Thank you!
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/xcopy.mspx?mfr=true
Maybe this page will help?
or that, asked in the forums of win7
-
I have 90% free or empty space on my computer, but my memory is full of error logs.
How can I clear the logs for free my memory and find my speed?
Hello
Thank you for contacting Microsoft Answers.
Too clarify unwanted newspapers, go to my computer-> select your system partition/drive (the partition where Windows is installed usually C:\)->right click for menu doll-> click Properties-> click on disk cleanup.)
After a few seconds, the disk cleanup window opens. Select the categories of files that you want to remove, and then click Ok.
-
How a repair tech to display error log when it is not on the computer
I got our office for repairs because it crashed constantly and gel to the top. The technician who brought back the computer said that there is nothing wrong just a few things that it has fixed. Not 10 minutes after that he did to the left of the computer freeze and our screen is blurred. When I called him to inform him, he said he went in my error log and he could see that there was a problem. It's that he can see what I'm doing? Better yet, what can I do to eliminate looking at him in front of my computer.
You can disable remote assistance by will start--->Panel---> System---> using Remote taband uncheck the allow invitations to support remotely to send from your computer. I suspect that when you took it, he put the system in place for handling remote.
You can also remove remote assistance exception in your firewall.
-
What kind of things can I delete on my computer to make the space.i downloaded lots of stuff you want to find and remove the it.thankyou much novice user
We do not know what you download and what you have installed so difficult to answer.
If you have installed some stuff and you want more, then Yes, uninstall it from Add/Remove.
Regarding the error log - are what error paper you referring?
FYI - http://support.microsoft.com/kb/310312
Description of the tool in Windows XP disk cleanupHarold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
MS antispyware error log text document
In my program files, there is a record of anti-spyware microsoft with a text of the error log document. This document is large, 953 MB is it OK to remove this file?
Go to add/remove programs and see if MS Antispyware is here. If this is the case, you can uninstall it. MS Antispyware is an obsolete program. If it has already been uninstalled (does not appear in Add/Remove Programs), then simply delete the folder in Program Files. MS - MVP - Elephant Boy computers - don't panic!
-
Failed to create task scheduler error log... Event ID 412
Original title: windows edition vista Home premium... Error log... Event ID 412... Task Scheduler service failed to start triggered by computer startup... Additional data... Error value 2147549183
Also, when trying to open the Task Scheduler to message... The image of the task is damaged or has been tampered with
dabf8524-213d-4B2F-8c28-216053942221
6db14b86-dc09-417f-B9E4-8ea3e1d3cad3
5e741641-d6b4-4A05-BE04-d909bd185b49
Reminders-Nat
MP Sceduled Scan
Thank you for any information you may be able to help with this problem
Thanks, Nathan
Hello
Have you made changes on the computer before this problem?
Try the following and see if it helps.Method 1:
I suggest you delete the related corrupted image in this folder and see if the problem occursCommonly, Task Scheduler task image is located in:a. in Windows Explorer, navigate to the folder below.
C:\Windows\System32\Tasks.
b. remove the related items.
c. try to create a new task and check if it helps.Method 2:
I suggest to remove the item from the following location registry and check if it helps.
a. click on the Start Menu.
b. type regedit in the search box and press on enter.
c. If the application for leave, click on continue to open the registry editor on the left pane, navigate to the following:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache\Tasks.
d. remove the registry concerned items.
e. close the registry editor.
f. restart your computer.Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry
Reference: -
Apache error log is 146gigs because of the online game I think, how it remove?
I was online game. I keep losing free space on the disk. My apache error log is more than 146 GB. How can I delete? I tried. I read about resetting my journal from the mistakes of 'prevent' to 'emerge', but I couldn't save this parameter or the other. any help? Thank you
Hello chriscilantro,
Try contacting support for Apache as it's a matter of Apache.
Please click the link below for support of Apache.
http://httpd.Apache.org/support.html -
Try to install autocad architecture 2012and get 1603 error log.
I have Vista 64-bit with Service pack two. I'm having a problem when trying to install autocad architecture 2012. The installation will fail and the error log indicates Visual C++ 2008 has begun and then abandoned... error 1603. My continuous automatic Windows Update Service update two pack 1 updates and when I check the history they have been successfully updated each time. I feel that I need an update for Visual C++ 2008 and service pack update is noted as successful. I uninstalled all such files as suggested by autodesk and autodesk products. Then redownloaded and tried to install. Failed every time. A friend had the same problems and after Vista update, hers is a 32-bit system... She redown loaded Autocad and installed. Are there updates for service pack 2 because I noticed are updated to service Pack 1. This program is my lively hood! I tried to install 2011 also failed. The 2009 version worked fine, but I uninstalled it he's trying to upgrade. My system is too qualified to manage the program. Thanks Cat
Hello
I suggest you try the steps in the following articles (one by one) and check.
You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package
http://support.Microsoft.com/kb/834484When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
http://support.Microsoft.com/kb/923100/en-usThere is a thread on the problem installing AutoCad (both for the installation of 2011) found here: http://forums.autodesk.com/t5/Installation-Licensing/Autocad-2011-Installation-trouble-error-1603/td-p/2699162
-
Error log can be used with multi table insert?
I mean I want to insert into multiple tables and errors in the log for each table. Would this be possible?
I tried something like below:
in zzz_party)
name,
party_type,
domicile_ctry_id
) (the values
case
Where rn = null then 14
other name
end,
party_type,
domicile_ctry_id
) Journal of log errors in zzz_err_party ("INS1")
reject limit unlimited
in zzz_party2)
name,
party_type,
domicile_ctry_id
) (the values
name,
case
Where rn = null then 14
of other party_type
end,
domicile_ctry_id
)
Error log of journal zzz_err_party2 ("INS1")
reject limit unlimited
Select name, legal_name.
case
Where rownum = null then 14
of other party_type
end
-t.domicile_ctry_id, rownum rn
advantage t
WHERE name like 'A %' and rownum < = 100
;
And it does not work.
Is there a way to do what I thought without having a separate select insert for each table with its own errors in the log?
Whenever you have an error message the complete error message. "It doesn't work" is not an error message that others can understand.
Looking in your statement, there are some flaws of syntax. I have fixed the. Try this
insert all into zzz_party ( name , party_type , domicile_ctry_id ) values ( case when rn=14 then null else name end , party_type , domicile_ctry_id ) log errors into zzz_err_party ('ins1') reject limit unlimited into zzz_party2 ( name , party_type , domicile_ctry_id ) values ( name , case when rn=14 then null else party_type end , domicile_ctry_id ) log errors into zzz_err_party2 ('ins1') reject limit unlimited select name , legal_name , case when rownum=14 then null else party_type end party_type , t.domicile_ctry_id , rownum rn from party t where name like 'A%' and rownum<=100;
-
Why error log is not catch every error?
Hi all
I wonder is why newspaper error only intercept a mistake? In other words, in the case of more than one error occurs for each row, error log only trap one, why? Do you rely on it?
create table test_table
(
primary key ID number,
txt varchar2 (5)
);insert into values table_test (1, "yyyy");
insert into values table_test (2, 'bbbb');
insert into values table_test (3, 'cccc');
insert into values table_test (4, "dddd");commit;
exec dbms_errlog.create_error_log (dml_table_name = > 'Table_test');
Insert into test_table
SELECT id, txt | txt from test_table
release log errors unlimited limit;0 rows inserted.
Select count (*) MRO$ _test_table; = > It must be 8. Because 4 errors for ORA-00001: unique constraint and 4 errors for ORA-12899: value too large for column
4
Thanks in advance
This is because Oracle gives only one error at a time.
In my case it gave me this error.
ORA-12899: value too large for column
Once he receives the first error, it does not have to insert the data to get the second error!
SQL > create table test_table
() 2
number 3 id primary key,
4 txt varchar2 (5)
5 );
Table created.
SQL > insert into values table_test (1, "yyyy");
1 line of creation.
SQL > insert into values table_test (2, 'bbbb');
1 line of creation.
SQL > insert into values table_test (3, 'cccc');
1 line of creation.
SQL > insert into values table_test (4, "dddd");
1 line of creation.
SQL >
SQL > commit;
Validation complete.
SQL > insert into test_table
2 select id, txt | txt from test_table;
SELECT id, txt | txt from test_table
*
ERROR on line 2:
ORA-12899: value too large for column 'MARY '. "' TEST_TABLE '. "' TXT ' (real: 8,)
maximum: 5)
-
Error log runtime directory forms 11g
Hi does anyone know where 11 GR 2 error log is located in c:\oracle runtime error log directory
There are a lot of newspapers in the environment. You must be more precise.
With a typical configuration, an incoming request forms will hit OSH then the forms Servlet (which in WLS_FORMS) then hit the Forms Runtime (frmweb) then if go to the db it will hit the DB client layer. Here are a few of the many places for the main components in the path that I have just described:
OSH
C:\Oracle\Middleware\asinst_1\diagnostics\logs\OHS\ohs1
WLS_FORMS and forms Servlet
C:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\WLS_FORMS\logs
Track of forms and dump
C:\Oracle\Middleware\asinst_1\FormsComponent\forms\trace
-
Characters in numeric columns and dml error logging
Hello
Sometimes we get the data from the erp system which has the wrong data type for example number of year issue 99.99% of the digital time - character from time to time
While mandatory record integrity constraints can be used and what Paris way to handle errors. dml - recipient data must have this column in the numeric form
We could filter these records.
With the help of 11.2.0.3
Just wondering if any new features would allow it - don't think that put a shadow dml error logging table would work.
Thank you
Nordine:
Not a sure grip.
SQL > WITH test_data LIKE)
2. SELECT "100" val FROM dual UNION ALL
3. SELECT "101" val FROM dual UNION ALL
4. SELECT '10' a2 dual UNION ALL val
5. SELECT "1 b 03" dual UNION ALL val
6. SELECT "a" dual UNION ALL val
7. SELECT val '104' UNION double all the
8 select ' #$% @* "( double val).
9 select * from test_data
10 where UPPER (val)! = LOWER (val);VAL
-----
10A 2
1 b 03
one@OP
Why don't you use record to deal with incorrect data errors. It is simple and reliable and allows you to easily connect the lines 'bad' for analysis or to beat people in the source over the head with.
John
-
Hi all, I had a problem when using popup to create a new table row.
I do like in this http://andrejusb.blogspot.com/2009/11/crud-operations-in-oracle-adf-11g-table.html
but when I click on insert, an error stating:
java.lang.NullpointerExeption
ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #2 60096:Server
In other cases, when showing Popup, when I clicked on cancel (popup), the display of the error as above. I don't know why?
Can someone explain to me why. Thank you
Check your page links if the createInsert operation is present.
Then check that the getBindings() method returns a value and not null.
Timo
Maybe you are looking for
-
Should I move to El Capitan of Mavericks
Currently have a mid-2009 MacBook Pro Mavericks to market with a 1 TB hard drive and a 2.26 gHZ processor. Just upgraded from 4 to 8 RAM with original thoughts to move towards El Capitan. I use Aperture 3.5.1, but understand that I would need to go t
-
creating mobile application in the apex 4.1
All,I am creating a mobile application in the apex 4.1 but I can't like the new theme of jquery like 4.2.x then what is the best approach without installing additional libraries / files on the server? I tried cloudy = 24 but its is not in great shape
-
fonts of creative suite license
Is it permits using fonts included in Creative Suite Design Standard 6 in trade?
-
Hello, I have been using BusinessCatalyst to host my adobe Web site muse for awhile (connornorvell.businesscatalyst.com) until I finished it.I wanted to test some CMS features in catalyst for business, but when I went to connect it said that "'Busine
-
Liquefy tool showing the bad curcor
Always problems with Liquefy Tools -Hello.I can not Discover What's not when I use the " " Liquefy. "Although I have activated le good layer et Press on the """ finger""" flow Tools, (self image "then fluidity Circle doesn't appear when I move the mo