Error message from the Desktop of blackBerry Smartphones software

Similar Questions

• Cannot print and get an error message from the printer saying to close the scanner cover

  Original title: I can't seem to print on my Epson Workforce 845.

  I can't print from my computer running Windows 7 Home. I get an error message from the printer telling me to close the scanner cover. I can print without problem of my computer running Windows 7 Enterprise.

  Hello

  (1) is your computer connected to a network?

  (2) did you of recent changes to the computer before the show?

  (3) what is the exact error message?

  You can run the troubleshooter printer on the computer that faces the question and check if it solves.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also consult the following articles and check if it helps to solve the problem.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Install a printer: http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  For any further assistance, I'd contact Epson printer manufacture support.

  Here is the link: http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=overview

• Pavilion tx1410us - error messages from the BIOS disk Test

  My first post here so greetings and a happy new year to all.

  I have a Pavilion tx1410us who seems to have a hard drive problem. I have Vista (Partition 2 - 60 2 GB as/dev/sda2) and Ubuntu 10.10 64-bit (1-1 St 20 GB as/dev/sda1 Partition) on the first partition and am getting ATA DMA error messages 2 and on the console when running Ubuntu.

  When I had Vista on the first part of the disc I was getting a lot of errors on Vista.

  I ran check disk for bad blocks, but several seem to be coming.

  Last night I ran the test of the drive from the BIOS twice and twice got them the same "Test #2-07 failure" error message. The text is perhaps not quite correct, but the "#2-07" is certainly.

  Does anyone have a reference to what the BIOS messages mean?

  With the errors appear to come from the same part of the disk that would lead me to believe that it's the hard drive itself which is a failure, but I want to be sure that it is not the disk controller until I get a new hard drive.

  It was close in the past, but we are now very careful to use only on a surface hard and keep the vents unblocked so I think I can have escaped heating problems that seem to dog these machines.

  If someone is under Linux, you can install the monitor CPU cmdlets and the temperature of the system that can sit on your desktop and show you the temperatures constantly. Very useful. Interesting to see the speed at which the processor gets hot when editing or video processing.

  Thanks in advance for any help.

  Andy

  Hi Andy,.

  The error message definetely is hard even though I'm not sure what #2 refers to other it can tell the difference between the short and complete test.  This, and the fact that more unusable blocks are appearing constantly in all point to the failure of the HARD drive.

  Best wishes

  DP - K

• Sometimes web error message from the client / popup that lies behind the HTML view

  Hello

  At times the web client error / popup hiding behind making the full background grey out and highlighting HTML display the HTML view. At this stage the actions behind the HTML code / above the screen HTML is not clickable, which forces the user to refresh the entire page (in case of a popup). Please find attached the screenshots. I tried to find if it is a known problem, but found no references linked to this document from VMware. Can someone please tell me, if there is no work around for this problem.

  Details of the environment:

  • Browser: Google Chrome (latest version)
  • OS: Windows 2007 and 2 k 8
  • vCenter: 6.0

  
  

  Steps to reproduce:

  • Open an extension point that contains the HTML content.
  • Leave it for awhile until the point the web client session, timeout occurs (or) to disable the WebClient service / vcenter server service (Note: this one is not always reproducible.)
  • Try to perform some action less content, it will display the html error message / see the popup behind the html code.
    

  
  

  The problem of popups being hidden behind an HTML view is fixed in version 6.0.1 which was released on 10 September.

  Same question as indicated previously here: problem with IFrame based HTML hosting inside Flex views

• Error message from the kernel Extension

  Recently, whenever I start up my Mac, I get an error message indicating the Extension Wware merger of the kernel VM was poorly installed and must be reinstalled. How can I go about fixing this?

  Thank you!

  Nathan

  You must uninstall VMware Fusion then download the latest version of http://www.vmware.com/download/fusion/ and reinstall it. Make sure you restart your Mac before you uninstall in order to ensure that no process of VMware are running then restart your Mac again before reinstalling. You can uninstall merge by going to/Library/Application Support / VMware Fusion / and run uninstall VMware Fusion.app

• Jdev11g; Customizing the Error Messages from the Business components

  Hi all
  
  Using Jdeveloper 11.1.1.2. I customized the BC error message using message bundle. My bundle of message class is
  
  SerializableAttribute public class MessageBundle1 extends ListResourceBundle {}
  private static final Object [] [] sMessageStrings =
  New String [] [] {}
  {"Houston-26048',"child records exist against the selected record"},
  {"EMP_JOB_FK", "there are the child records to selected record" ""},
  {"Houston-25013',"record already exists"},
  {"JOB_ID_PK", "' Job ID already exsist" "}
  };
  
  / * Return string identifiers and the corresponding Messages in a two-dimensional array.
  */
  protected Object [] [] getContents() {}
  Return sMessageStrings;
  }
  }
  
  
  Need help on two or three issues, I am confronted with this: -.
  
  (1) although I gave the error message for Houston-25013 and JOB_ID_PK, always I get after the error message on the user interface, when you save the new record
  "Too many objects correspond to the oracle.jbo.Key [AD_PRES primary key]."?
  (2) why do I get "Attribute in HrModule.JobsView1 JobId is required." with above the error message in the error popup window?
  "(3) when removing the record, even though I'm getting desired error message on UI ' oracle.jbo.DMLConstraintException: there are the child records to selected record", why the error message is prefixed by "oracle.jbo.DMLConstraintException".?
  (4) how can I locate the error messages in another language?
  
  Thank you
  Vikram
  
  Published by: Vikram K on March 22, 2010 15:23

  Hello

  Just put the number of the error, instead of Houston-25013 1), try with 25013

  For 4) you must create a second resource group with the locale in his name. ex I have a BCBundle.java for English and a BCBundle_fr.java for the French
  Check the guide FusionDev and WebDev guide for information on the locale and the beams of the resource.

  HTH

  Concerning
  Paul

• Problems of blackBerry Smartphones with error message on the Desktop Manager

  Hello

  I am having trouble with an error message that I get when I try to sync my Curve 8530 with MS Outlook 2010.  It was working fine and now I get the error message "error code-0x80043ade. See the documentation "all advice?

  Thank you!

  I had the same problem when I first tried to synchronize. The problem for me was when the BlackBerry Desktop Software has updated to Version 6, it left the old version - Version 5 - on my computer. If you go into the Control Panel on your computer and uninstall the Version 5 and try to re-synchronization, it should work!

  I hope this helps!

• Error connecting to the Terminal for blackBerry Smartphones

  Hello

  I have a BB 8100, Desktop manager 4.6.

  The synchronization work properly 3-4 weeks ago.

  Today, when I tried to sync, I got this error message:

  0 x 80040fb3

  I tried debug it using the procedure of changing family name, first name, etc... without success

  I tried several times to synchronize again but without success.

  Now, the situation is even worse!

  New message when I connect my BB to my computer. When I run the Desktop Manager, I have the following error:

  "Error connecting to the Terminal. Make sure that your device is connected properly, and then try again.

  I can't not try to synchronize!

  It is very strange, it's never happened before.

  However, Desktop Manager recognize my BB, I can read on the button to the left of the screen: Terminal connected (Pin code) recognized xxxxxx.

  HELLLLP!

  Thank you

  You know what?

  I just read another post suggested.

  They simply offered to take off from the Blackberry battery and put it again.

  Then I tried to sync and IT WORKED! I can't believe! I tried a lot of complicated stuff!

  1 month for this problem! (with this simple solution!)

  Hope that now, everything will be ok!

  Concerning

• error message from the invention of user required on printer hp2510

  For the last few days whenever I try to print to the printer from hp2510 I always an error of the necessary user input, how can I get get this error for good. I am currently using Windows 7.i some scanned documents

  a few days before this error occurred, this could be the reason? Thank you.

  Gwendoline

  Hi @kinggc,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem with your HP Deskjet 2510 printer and get an error message on your Windows 7 computer. Here is a link to the HP print and Scan doctor. Printing HP and doctor Scan will run a check of your system and your printer.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source because they can be a problem.

  Can make you a copy of something ok on the printer?

  Please let me know if you do this wired or wireless.

  I hope this helps.

  Thank you.

• error message from the object page Web keeps popping up, especially in hotmail. What should I do?

  Help me please

  Hi Dale,

  Thanks for posting your query in Microsoft Community.

  I understand that you are getting the error message while browsing Web sites in Windows XP.

  I will certainly help you in this matter.

  1. which web browser you are using?

  2. What is the exact error message you are getting?

  3. were there any changes made to the computer before the show?

  If you use Internet Explorer, please follow the methods.

  Method 1:

  Use the Internet Explorer (No Add-ons) mode

  To do this, click Start, point to programs, point to Accessories, point to System Toolsand then click Internet Explorer (No Add-ons).

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  1. click on Tools, then Internet Options.

  2. click the tab programs , and then click Manage Add-ons.

  3. click an add-on in the list name and then click disable.

  4. Repeat step 3 until you identify the add-on that is causing the problem.

  Method 2:

  Reset the Internet Explorer settings and check if it works very well.

  See the link.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Note: "Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords. »

  For any help about Windows, you can still post on the Microsoft Community Forum.

• Error message from the computer - SHWICONXP9106 - Load Configuration of the file has failed

  I got my Windows 7-64 bit system, which is now 13 months old, lock upwards and closed twice in a week.  I get a strange error message that says "SHWICONXP9106 - load Configuration File Failed".  It seems that this is a card I ever use.  It is a work computer that I rarely do anything whether online with.  He did re - starts and begins to funny click on my Tower.  It takes in telling the system to start windows normally and after stopping power, twice, I can get it to restart very well.  can someone let me know if I need to get a new hard drive again?  This system is only 13 months old?

  If you do not, you might want to see if it can be disabled at startup:

  1. Press simultaneously on key Windows + R .

  2. type MSConfig in the box, and then click OK.

  3. Select the Startup tab.

  4. find SHWICONXP9106 (if its there) & uncheck the box against it. Click OK.

  5 reboot & see what happens.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Email from being erased from the SMTP server blackBerry Smartphones

  I have setup my Storm just to collect email from my personal account, which is in an area of SMTP in Windows Server (no Exchange). I see that when I get a message on the storm, it is immediately removed from the server, so my normal PC does not see everything. There is the option when you delete a message in the storm to remove only locally, or delete the copy on the server and local, but it seems to be a little too rambuncious! For now I have to delete my account off the coast of the storm, but I would really like to be able to use it for timely emails when I go out in the field.

  And you were correct. I did a sniff of this ethernet on the SMTP server port and found an Exchange Server that has a Connector POP3 pointing on the account. Deleted the POP3 Connector (that Exchange server is not live yet) and the post office started acting normally.

• Message from SMS sending to blackBerry Smartphones

  I can receive text Messages but when I try to send them, it does not send. It goes to standby and does nothing else. Can anyone help?

  Thanks in advance

  First of all, restart your BlackBerry > with the phone smart BlackBerry turned on, remove the battery for a minute and then reinsert the battery to restart.

• Windows 7 - error message from the address conflict IP appears periodically. Error message "another computer on the network has the same IP address as this computer.

  Error message "another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

  Does anyone have a simple way (for a dummy) to solve this. If I disconnect my wireless router and laptop and turn the two again this sorts the problem temporarily, but it does not provide a definitive solution.  I use a new laptop and my old one has been scrapped, so I do not know whence this 'conflict '.  My old laptop had Windows XP operating system and my new Windows 7.  I hope that someone can provide a solution to this annoying problem.

  Hi Figgerty,

  have you tried these steps?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/IP-conflict-error-another-computer-on-this-network/4eed87e2-45FD-4FF7-ae29-9a9fb664a8cc

  B Eddie

• Error message from the apex of the change.

  I separate qa and data entry forms.  They have a low number of users but can be used in parallel on rare occasions.  Therefore, after opening a file for QA it is possible that it will change.  (it's all the needs of the company no-negiatable)

  Fortunately, if the QA status is passed apex detects this and displays the error messagae:

  1 error has occurred

  Current version of the data in the database has changed since the user initiated the update process. version of current line identifier = "8D716CB15D32DEBD815BEB72517F9448" line application version identifier = "E480FF3482CEA545726D9FFAC9BC7379".

  
  However, this is not the message of simlest for users.  I would like to be able to change it to something like.

  "This disc has been published please exist file and reload ' or something like.

  Is this something that can be done in an hour or less?  If not maybe I'm jjust leave it as it is and I hope that it does not cause confusion...

  It turns out that in shared, text_messages components I could simply create a text message containing the text for "APEX. DATA_HAS_CHANGED ".

  It worked well.  The answer above was helpful, however as he had me looking for internal errors, which was a search term better then I had used.