Error message: 'GRUB stage 1.5 loading. Error 71 ".
My laptop is dead. When I turn it on, all I get is a black screen. When I enter my password I get this message that says: "loading GRUB stage 1.5" and the next line says: "error 71". Even when I insert the recovery disk, nothing happens (although I can hear the work of the disc.
It is a fairly old Toshiba 'Satellite', which worked pretty well for me in the past.
Any suggestions? Thanks in advance for your help.
Roger
GRUB is the boot loader program that is installed on a computer when you install Linux. In your question, you did not mention what operating system you are running on your computer. You must provide this essential community information if you are looking for help. :)
Since you have GRUB loader in your computer, I'm guessing that you are running a version of Linux in the computer. If this is the case, these forums are not the right place to ask for help on this error, because these forums takes support only Microsoft Products. You will need to contact the teams/support forums for the version of Linux you are running.
And if you use Windows, you will need to provide much more than information of the computer with the problem - the version of Windows that you are running on the computer, what service packs (if any) are installed for this version of Windows, when is this problem started, do you remember any changes you or one software in the computer just before this problem started etc.
I hope that this information gets you started in the right direction!
Tags: Windows
Similar Questions
-
So I recently got these computer errors on my laptop. The pixels on the screen start to panic and it still restarts my computer.
The first time, he started was when I was playing a game called League of Legends and it worked perfectly fine on my laptop, and he had always run around 70 fps. I played this game for a long time. Then, in the middle of an online game the screen flipped out and restarted my PC! He sent me a message saying: "your PC has encountered a problem :(. "
After it restarts my laptop and then after restarting the pixels on the screen start to panic again and it restarted. After that restart again once he sent me a message saying he will "fix the problem on my PC. I clicked on 'Repair' and then it restarted again. After the restart he freaked out again and then it restarted and it gave me a message saying "your PC will convert at an early stage when it doesn't have this problem. This can remove files that have been installed recently. So, I allowed it do and after 3 hours of waiting he brought me to an earlier stage if my laptop was not the problem. He only come back in a few hours. Then the next day, I decided to try again in League of Legends, it was working fine and it launched the game. I was running on my normal fps then he started trolling and it fell to 12 frames per second and the screen flipped out again and then my computer restarted. Once restarted, it it worked fine after 5 minutes it restarted again, and then he gave me a message saying: "Windows could not load correctly" then he said I got the error: "0xa0000001. I turned on my PC and my screen has panic when he started, and then it restarted again give the same message and tell you have the error: 'DRIVER_OVERRAN_STACK_BUFFER '. It came on again and it was worse still panic then it restarted and it gave me the same message saying that you have the error: "BAD_POOL_HEADER". It restarts and several times with lit the screen always freak out so I decided to just remove the plug and ask for help. I went on the computer of my brother and sought a solution for these errors. Turns out Im not the only one to these errors. They say that '0xa0000001' error is caused primarily by an AMD graphics card and my graphics card is an AMD graphics card. The solution for this error is to uninstall the graphics card and reinstall it directly from the manufacturer's website. I could have made this solution and corrected my graphics card, but there is a problem. Whenever I turn on my laptop the pixels panic and sometimes the screen turns black and then it restarts. I can't access anything whatsoever, and he keeps just restarting. Please help me and tell me how to fix my phone :( I really need a solution to this problem.
Please answer quickly :(
Thank you
There is an old saying that if it ain't broke, don't fix it.
It works again.
Read this information
You need to get the Driver of your laptop computer software or a hardware manufacturer, not through Windows Update (with the exception of Microsoft put updated material), as Microsoft normally does nor those have the most recent drivers available as Microsoft leverages the hardware manufacturer 3rd party to provide them.
Go to the website for your laptop or manufacturing equipment > Driver and Software Support Section > search your laptop or material style number > then your operating system > locate the correct drivers > download and install.
______________________________________________________
But this is no guarantee that this won't happen again.
Also, it would be that the game hardware requirements are higher than supports the hardware in your laptop.
It could also be due to lack of graphic material.
All you can do is search for the latest drivers and play games that require only a material that has your Lapyop.
See you soon.
-
Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »
Perhaps the reason for the problem of synchronization is the problem with the loading of google map?
Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »
Apple has not renewed the contract with Google to access Google servers.
If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging. Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.
There is more support for iPhoto from Apple. You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.
Perhaps the reason for the problem of synchronization is the problem with the loading of google map?
It is very likely. If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.
-
Following error message is displayed "could not load C:Users/Owner/Locals~1/temp\msavvzczh.exe how to remove the registry."
Remove it from startup. Start/Run, type msconfig. Delete it under the Startup tab. Its probably malware
-
I get the error message when I try to load lightroom 5 - unable to laod application properly (oxooooo7b)
What can I do
Search here or Google... https://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html
-
Hello...
When my cc photoshop opens a message "extension could not be loaded because it was not signed." What is c? How can I solve this problem.
Please notify.
Thank you
Shaji
Hi Shaji,
You use Onone extension on your machine? If so, please follow the steps mentioned below.
http://www.on1.com/support/979135/
Please post on the Adobe Forums.
-
my systems page will not open error message "the page failed to load".
Original title: my systems page does not open after going into the control panel and then system and maintenance
my systems page opens not after going under maintenance then system and Control Panel. This shows simply "the page failed to load". I need to access this page to share files from one computer to the other. can anyone help?
Hi Sarah Brown,.
(1) remember you to make changes prior to this problem?
(2) what is the complete error message you receive?
Method 1: Run the fixit available in the link below and check if that makes a difference
Difficulty of broken desktop shortcuts and common system maintenance tasks
Note:
Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.
Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833 -
Error message from the computer - SHWICONXP9106 - Load Configuration of the file has failed
I got my Windows 7-64 bit system, which is now 13 months old, lock upwards and closed twice in a week. I get a strange error message that says "SHWICONXP9106 - load Configuration File Failed". It seems that this is a card I ever use. It is a work computer that I rarely do anything whether online with. He did re - starts and begins to funny click on my Tower. It takes in telling the system to start windows normally and after stopping power, twice, I can get it to restart very well. can someone let me know if I need to get a new hard drive again? This system is only 13 months old?
If you do not, you might want to see if it can be disabled at startup:
1. Press simultaneously on key Windows + R .
2. type MSConfig in the box, and then click OK.
3. Select the Startup tab.
4. find SHWICONXP9106 (if its there) & uncheck the box against it. Click OK.
5 reboot & see what happens.
All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.
-
I get the update of Windows asking to download. I try and download and every time get an error message '57th in the code. How can I do this properly installed without error message?
See you soon!
Hello
1. try the steps by the solar eclipse on April 23, 2009 at 15:41 from the link below and check if it helps.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/691a9c92-624e-4BB9-847a-fe9fc6a51394
2. If this does not help, try to reset the windows components and check.
Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Why do I get error message "Prop Bitmap DLL not loaded" when I try to print Adobe documents?
When you try to print images or text in Adobe format, I get the above error if you use Mozilla firefox as my browser. I f I use Internet Explorer as my browser, I don't have any problems printing from Adobe.
With Lexmark printers, we saw these mistakes before and the solution was to copy the printer or a subfolder (for example C:\Windows\System32\Spool\Drivers\W32X86\3) DLL files in the main folder System32.
See [816793/questions/816793]
-
Error message - protective conductor player not loaded after installing XP
When I reinstalled XP Pro using a generic disk, I get the message 'Disc of protective conductor has not loaded' when I boot.
I do not have the original CD.How can I get the driver he needs?
Thank you, Jon
Install the XP all service packs. SP1 + SP2!
Upgrading XP to the last State by using the Microsoft Update page.Please note; Sometimes you have to reboot several times to get all the fixes and patches!
Good luck
-
Error message: FRM-1808: unable to load the following items
Hi gurus
I copied the forms of my server on my local machine and got the following message when I try to open this form:
Message
FRM-1808: unable to load the following items.
Source Module: test_property_class.fmb
Source object: J_OBJ_GRPAfter that, I see another message to fix some PL/SQL libraries, now I have a plan to fix the missing library, but I don't know how to get rid of the message above...
Appreciate your help. Thanks in advance.
Concerning
Muzz
Forms is unable to find your form tamplate and your PLL.
Check FORMS_PATH (in the registry) and add the appropriate paths where to find them.
-
How can I solve this problem?
Contact HP for instructions on installing the printer software.
-
I went into the backup from the control panel and its saying that no replacement has been set up... I tried several times, just to be sure that I had set up the backup on my computer before and it worked very well, I don't know what else to do... help
Hello
All changes made to the computer before the show?
Method 1:
Run the tool on your computer system file checker. You can check the link that will give you information on how to use the System File Checker tool to fix system files missing or corrupted on Windows Vista or Windows 7 below:
http://support.Microsoft.com/kb/929833Method 2:
Run a check disk on the computer. Follow the steps.
1. Select command prompt.
2. type chkdsk/r (note: there is a space after chkdsk)
3. restart the computer and allow to run the disk check.Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost
-
I get his message erorr every time I load Firefox...
Question
I have another type of problem with Firefox
Description
I get this message every time I load Firefox. Click OK to launch the browser OK: -.
OnLoad error TypeError: TcFfUpdates.getTcPluginsInstance (.onBrowserStarted) is not a functionThis has happened
Each time Firefox opened
I installed the previous update.
Troubleshooting information
OnLoad error TypeError: TcFfUpdates.getTcPluginsInstance (.onBrowserStarted) is not a function
Version of Firefox
3.6.6
Operating system
Windows XP
User Agent
Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.6) Gecko/20100625 Firefox/3.6.6 (.NET CLR 3.5.30729)
Plugins installed
- -Adobe Acrobat plugin Version 7.00 for Netscape
- Coupons, Inc. Coupon Printer DLL
- Java (TM) Platform SE binary
- ScorchPlugin
- The QuickTime Plugin allows you to display a wide variety of multimedia content in Web pages. For more information, see the Web of QuickTime site.
- Default plugin
- Shockwave Flash 10.1 r53
- iTunes plugin detector
- DivX Web Player
- GEPlugin
- Plugin Picasa
- Plugin Yahoo Application State version 1.0.0.7
- Windows Presentation Foundation (WPF) plugin for Mozilla browsers
- 6.0.12.709
- RealPlayer LiveConnect-Enabled plug-in
- Netscape Plugin RealJukebox
- Google update
- Java plug-in 1.6.0_13 for Netscape Navigator (DLL Helper)
- Npdsplay dll
- DRM Netscape Plugin store
- DRM Netscape Object network
Barry, I don't suggest you disable one of your modules. I asked you to run Firefox in safe mode, easy (and, basically, temporarily) disable all add-ons. It's just for diagnosis at this stage.
But it's great that you fixed your problem though.
Maybe you are looking for
-
Equium M50-235: how much memeory of upgrade slots?
Hi, in response to a another question on this forum somone said this model has two memory expansion slots, I can only find one, it's on the underside of the case. All the ideas corresponding to the other? I also understand that this laptop uses ddr 2
-
HP ENVY 059C: pull the bottom of the box is not Windows 10 in option
I am updating my drivers using the HP Web site, but when asked for my (window 10 Home 64 bit) operating system there are two drop-down lists. The first request "Operating System" and I click on the option "Microsoft Windows". The second request 'Vers
-
Lenovo G505s energy for windows 8.1 64-bit management
Looking for new wersion for power management g505s. On the drivers download page is only for win 7 and 8 http://mobilesupport.Lenovo.com/pl/PL/products/laptops-and-netbooks/Lenovo-g-series-laptops/LENOVO-g...
-
How to put on for the TX2 Tablet usb loading
I have a TX2 tablet, and a usb cable it connects to a pda IPAQ 210 (pocket pc handheld device). I would like the device to recharge via the usb cable, and on the pda, on the control panel to power, under the usb charging, I checked (or selected) 'use
-
Canon printing service app works now printing of phone and im upset I need help people please
Canon has me awhile back that they do not use cloudprint to download canon printing services and printed phone for quite a while... He kept adding more numbers to connect, and now on the third issue, he leaves his all blackened... canon stop messing