Error messages for the following updates several times?

Similar Questions

• I received the following updates several times and they always fail to install, they are KB949074, KB2656353 and KB2656370. How can I fix it?

  Receive automatic updates and there are three that will not be installed?   They are KB949074, KB2656353 and KB2656370.   I needs Blons them or should I solve the problem?

  Hi sgmillersr,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• I recently did a system update and installed Yosemite on my Mac. Now I can't open CS5 at all. I get the error message is the following: "to open Adobe Photoshop CS5.1, you must install Java SE runtime inheritance 6. I tried to download this and it still

  I recently did a system update and installed Yosemite on my Mac. Now I can't open CS5 at all. I get the error message is the following: "to open Adobe Photoshop CS5.1, you must install Java SE runtime inheritance 6. I tried to download this and it still gives me the same mess

  Try to install JRE from

  Java for OS X 2014-001

  Then fire and control

• ORA-04031: unable to allocate 32 bytes of shared memory ('shared pool'.  Check your error messages for the cause of the error. (= < POINTER >)

  Dear team,

  We have for instance R12.

  DB - 11.2.0.3

  12.1.2 - application

  in this concurrent instance depressed frequently when checking of log file showing the error as

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic FDPCRQ met an ORACLE error. ORA-04031: unable to

  allocate 32 bytes of shared memory ('shared pool'.

  Check your error messages for the cause of the error. (= < POINTER >)

  .............................................................................

  APP-FND-01388: cannot read the value for the profile FND_MGR_STRTUP_THRES_TIME option in the routine, and routine.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  
  

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  Post: WARNING: mail_queue_enter: create file maildrop / 379309.437: permission denied

  Please guide me to solve this problem.

  Concerning

  Kumar V

  Dear Kumar,

  I suggest you to check the FND_NODES table

  1) connect to SQLPLUS as the APPS user and execute the following statement:

  Select CONCURRENT_QUEUE_NAME in the FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM ';

  (2) If you have found that FND_NODES table with entries incorrect node (old node from the Source Instance), and then run the query to clean below

  EXEC FND_CONC_CLONE. SETUP_CLEAN;
  COMMIT;

  (3) then run AutoConfig on all stages, firstly on the DB layer then APPS and webtiers levels to repopulate the necessary system tables,

  and make sure that you are now able to see the correct entries in the FND_NODES table and start the application services.

  Kind regards

  S27

• Error message for the trial of Photoshop CS7

  Why do I get an error message that the installer is misconfigured for assistant once downloaded Photoshop CS7?

  There are known issues with Adobe Download Assistant:

  Section of problems known to troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assista nt.html #main_Known_issues.

  You can also download products from the following location:

  http://prodesigntools.com/Adobe-CS6-direct-download-links.html

  (1) you must stay on the page of the trial of Adobe for each product that you download. You must be logged in.

  (2) copy / paste link 1, link 2 for files you download Prodesigntools on the page of the trial from the Adobe address bar and press to enter.

• How to clear the error message for the particular component

  Greetings,
  I display message of successful Transaction after Commit Transaction success using the af:Message component, which is locked in PanelGroupLayout. I am programmatically displaying the message Transaction successful for PanelGroupLayout in which the Message label is present in the Commit method of action. After validation, action if I have no action to "CreateInsert" the message of successful Transaction get not allowed. I want to erase the message for the PanelGroupLayout component. I use JDeveloper11g release 2 Please help...
  
  Edited by: 899000 November 24, 2011 03:32
  
  Edited by: 899000 November 24, 2011 04:04

  You can call getMessages() on the FacesContext, to browse and delete (s) you want

  I have not tried, but Google should find you some examples.

• Pavilion 15 t product # G1V32A: HP 3D DriveGaurd Error Message since the last update for Win 7

  Since the last update of Win 7 in the last week, I get an error on AccelerometerSt.exe is unable to start up.  I guess that's the HP 3D DriveGuard show.  How can I get the program re - install?  Thank you!

  Hello:

  Normally, just reinstall the driver 3D driveguard gets it working again.

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• Error message for the update

  Hello
  My computer won't let me not update even when I disable the firewall. I don't know if to do as well with not being able to install a driver
  cordially koolstar

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Receive the DOWNLOAD ERROR message for photoshop CC update

  Should I uninstall my current Photoshop app and reinstall everything from scratch?

  M Minalima, try the following steps.

  1. Restart the machine try to update.
  2. Open Photoshop CC, click Help > updates and try to update.
  3. Try: https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
  4. You can also try to download and install the updates manually:
  • http://prodesigntools.com/Adobe-CC-2014-updates-links-Mac.html
  • http://prodesigntools.com/Adobe-CC-2014-updates-links-Windows.html

  Let us know if these aid measures.

  Atul_Saini

• Can manage Windows XP Home Edition of Windows 8? Get the error codes for the security updates (0 x 643). ALL through Microsoft Tech INFECTED with the virus and Trojans tried. I need help BADLY. Thank you.

  I tried every thing blessed with technology microsoft... always hanging in limbo here.  Tired of doing constant comprehensive analyses, etc. in order to remove the constant threats.  Apparently my McAfee can't stay with her either.  Need help with the download/repair these seeds as soon as possible.  Thanks to all those who wish to help me - it would be that popular, for sure!

  The question makes no sense.

  "Can manage Windows XP Home Edition of Windows 8?"

  Two problems: there is no Windows 8 and even if there were, Windows XP Home Edition would not not 'manage '.  ;-)

  I drop McAfee for a few different freeware products.  Or better yet I'd get two products 'cost' (~ 25 and 60 dollars) and install them and use them in the future - but WHEN you are trying to clean up.

  You seem like you maybe sincerely - at a time when a format/install of Windows XP/patching/installation of applications/patch/restore backups of your data is the best course of action.

  However, if you are willing to work - maybe we can at least get things cleaned up to a certain point where you can get a good backup before doing this (otherwise avoid doing all together.)

  In the order shown, do not jump (no matter what you do, what you have done in the past, etc.) ...

  First of all - download, install, operate and put to update and then run a full system scan with the following two (one at a time, reboot in-between):

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Search online with eSet Online Scanner.

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now try usig the Fixit (Yes - try to use it again) to reset your Windows Components Update (you'll do the aggressive version, not the other):
  How to reset the Windows Update components?

  Reset.

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Reset.

  Now, open Internet Explorer, visit http://windowsupdate.microsoft.com/ and do a CUSTOM search for updates.  Install any critical/high-priority ones and - for now - to ignore all those in option (always do this for material updates optional here.)

  Restart if necessary and continue to visit this web page until you have not yet updated to high priority.

  Now - if your problem is with the facilities of the .NET Framework...  You can end up with something like:
  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
  to uninstall a few versions of the .NET Framework, then you can try to install again - but you should not do this until the machine is supposed to be cleaned.

• error message for the app Lenovo store

  In the appstore of Lenovo, I have the update waiting for gmail 4.05. Right now I have an old version 3.0. But when I go to update I get the error message that says that the package of the analysis of problem. Someone knows how to fix this? Thank you.

  Kaledai wrote:
  What version of android you have on your TPT? New update of gmail requires android version 3.2 and newer.

  The TPT had ever 3.2? I don't think so.. He went directly from 3.1 to 4.0.

• Why Windows asks me to install the same updates several times. Often several times the same updates and often several times in the same day?

  I install security updates and important. Sometimes in the same day, I wonder to install the same updates. When I check the history I see that they are already installed. This can happen several times in the same day.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  UTC/GMT is 00:34 Sunday, March 11, 2012

• Installation for the error message for the Fund

  Hello
  Can someone tell what is the condition prerequisite/configuration to make the error message to display when the created purchase order does not have sufficient funds to cover the PO commitment

  Hello
  We believe that you have found this error checking of funds coz... An audit of the Fund determines if there are funds available for the requisition according to the budget there is place and if the cost is deductible. If funds are not available for the requisition, the applicant will receive an immediate notification that the funds are not available, and the request cannot be processed.

  Could you please check the profiles, 1) POR: allow funds to check, it is defined as "Checkfunds"?
  (2) PO: Substitute funds reservation

  S.P DASH

• Error message for the integrity constraint

  Hello
  
  I have a table called TMREF_MEDIATION_DATA_TREATMENT and one called TMREF_UOC_CRITERIA_MAPPING. There is a foreign key constraint and the TMREF_UOC_CRITERIA_MAPPING
  table contains the UID of the other column. When I select Remove form TMREF_MEDIATION_DATA_TREATMENT I get an error as expected:
  
  ORA-02292: integrity constraint (MRS_DEV. TMREF_UOC_CRIT_TO_TREAT_FK2) violated - book of the foundling
  Error
  Cannot process the row in the TMREF_MEDIATION_DATA_TREATMENT table.
  Ok
  But is it possible that I can make this more user friendly error? I don't want to delete if there is a record of the child - it should just warn the user.
  
  Thank you.
  

  You can use this method:

  http://Apex.Oracle.com/pls/OTN/f?p=31517:185

  who is in the process of the page. However, you can also create a validation, that fires before the execution process and verify the same.

  Enter an invalid number will infringe the constraint (column is a column number) and it will then call the INVALID_NUMBER exception. You can also declare with the exception of constraint on aid

  child_record_not_found EXCEPTION;
  PRAGMA EXCEPTION_INIT (child_record_not_found,-02292);

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Error messages on the security updates.

  Try to get updates of security (Vistsa) (three different ones) and get three different error codes: 800b0100, 80070570 and 80070020 - tells me that updates "met with unknown errors.  How can I fix this.  I am a novice and need clear step by step instructions.  Updates security trying to get are KB967723, KB9705238 and 972036 KB.  I tried to get one at a time (from) with the oldest first and all at the same time - get the same error.  Help, please.

  You're currently running Vista, Vista SP1 or SP2 for Vista?

  Try/download bar...

  .. .the tool was updated for Windows Vista system...
  http://support.Microsoft.com/kb/947821/

  See also...

  Description of Windows Vista... update installation software feature released on April 28, 2009
  http://support.Microsoft.com/kb/955430 ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft