Error of the bad Image of Skype?

Similar Questions

• The bad Image of Skype error

  Hello! I get the error of the bad image whenever I try to start Skype. I run dxdiag but everything works. The error that says:

  THE BAD IMAGE ERROR

  C:\Windows\SYSTEM32\sxs.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the vendor to softwar for support. 0xc0000006 error status

  and after that, I get the message "Runtime error 217 at 4 005283D"

  Does not work either. In any case, I've solved the problem! Solution: I reinstalled Windows 8.1 pro (seems to be the unique solution to the problems of windows)

• Error of the bad image when opening certain programs such as iTunes and Avast

  I have a computer that is running Windows XP and I recently had this problem occurs: when I try to open certain programs I installed (itunes, Avast, etc.) and a message appears saying 'bad image' followed by the name of the program. He also says to check the Setup disk. I really want to get this problem finally fixed. This computer was given to me without any software of anything. I would be very happy if it can be fixed.

  Sincerely,

  Austin Noll

  Well, all I can just anti-malware analysis...

  http://www.Malwarebytes.org/

  But you really want to get your hands on these CD, just in case.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• The bad image error. C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

  Whenever I try to install the material using a USB port, I get an error from the bad image. It is said:
  C:\Windows\system32\cfgmgr32.dll is not designed to run on windows or it contains an error.

  Any help will be useful.

  Thank you
  Jeff F.

  Hi Jfog18

   

  1. what material are you trying to install?

  2 have you installed for the device that you connect software?

  3. were you able to connect the hardware device much earlier?

  
  Method 1:

  You can analyze your computer using online for computer viruses antivirus scan. Rerailway to the link below to complete the virus scan online. Check if this help -
  http://OneCare.live.com/site/en-us/default.htm

   

  Method 2:

  You can perform a SFC scan and check if the problem is resolved.
  To Perform a Scan SFC -
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on Allow.
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• I get the 'BAD IMAGE' when many *.exe files is available. The error image refers to "BROWSE ~ .dll." What is the correct file name?

  When I type (OK) the computer continues to the application, I entered, but there may be a range
  in the opinion of the 'BAD IMAGE' with various. EXE files. Somehow gotten past as the correct file name cut short
  what he should ever TRAVEL ~ .dll. I can rename it leaving out the "~" symbol, but I don't know what to rename it.
  Help?

  Hello

  It would be useful to the Windows OS is supported .

• error "logonui.exe - bad image".

  My daughter has an Acer computer and received the following error message: error "logonui.exe - bad image. I tried to re-boot the computer in Mode safe, but also invite command, it still shows the same error message. If you 'x' out of the box, or click ok, it will take you to a black screen. I'm unable to log in or do a system restore. Any suggestions?

  If you don't have a genuine plant Windows Vista disc or a recovery disk to do what Srimvas has suggested, you can make one at: http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ using burning like software: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  For procedures on the system restore, see: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.

  For startup repair procedures see: http://www.bleepingcomputer.com/tutorials/tutorial148.html.

  Good luck and I hope this helps.  Please post back and let us know in all cases.  There are several troubleshooting steps we can try if these don't work (not much, but some). Lorien - a - MCSE/MCSA/network + / A +.

• Can't find my CD-Rom Windows XP Professional, so I am unable to run a SFC scan to correct the bad image

  Can't find my CD-Rom Windows XP Professional, so I am unable to run a SFC scan to correct the bad image. Help, please! the files are corrupted and I can't fix. Is there a website link, I can go to, to download what I need in order to access cmd sfc/scannow? Thank you very much

  Hi ferfeferferfer,

  You can see the following article for more information on the software.

  How to replace hardware or lost, broken, or missing Microsoft software

• How to correct the bad image applesynofer.exe

  How to correct the bad image of apples synotifer.exe

  Contact apple.

• Helps the bad Image DLL C: Windows

  Help can some please tell Me what I have to challenge these error messages whenever I connect to my pc I get them

  1 Logi_MwX, Exe - bad Image

  The application or DLL C:\WINDOWS\system32\tuvtttTN.dll is not a valid WINDOWS image

  Check against your floppy installatioon.

  2 rundll32.exe - bad Image

  The application or DLL C:\WINDOWS\system32kuwmaayk.dll is not a valid WINDOWS image

  Check this against your installation diskette.

  3 RUMDLL

  Error loading C:\WINDOWS\system32\kuwmaayk.dll

  %1 is not a valid Win32 application

  Hello You did changes to the computer before the show? Method 1: A clean boot allows you to check if startup item or services to third-party application is causing this issue. Reference: How to configure Windows XP to start in a "clean boot" State: http://support.microsoft.com/kb/310353 Method 2: Sometimes rundll32.exe might be a form of the virus. I suggest you make a system full scan just to be sure. , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. Note 2: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. Here is a link that will give you information on how to perform a full scan of the system: http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Expand.exe - error dpx.dll bad image

  Hey

  Whenever I try to install a downloaded update something (e.g. itunes or google chrome) this message always appears and stops him.

  Expand.exe - bad Image

  C:\Windows\system32\dpx.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the software vendor or more support.

  Any ideas on how to solve this problem?

  See you soon

  Hi frjk69,

  Step 1: You can also check out the following link and perform an analysis online on your computer to verify if your computer is infected with a virus.

  http://OneCare.live.com/site/en-us/default.html

  This problem can also occur if a particular dll file is missing or damaged. You can try to run a SFC (System File Checker) scan and check what is happening.

  Step 2: SFC Scan

  (1) close all open windows.

  2) click on the Start, click on ' all programs"and click on"Accessories ". " "»»

  (3) with the button "command prompt" and click on ""run as Administrator ". "

  (4) in the window "Administrator: command prompt", type "sfc/scannow" (without the quotes) and press ENTER.

  (5) restart the computer after completing the analysis of the SFC.

  For more information, you can consult the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Help!  My Photos of Preview of Lightroom are associated with the bad image.   How can I fix it?  Thank you!

  Hello

  Part of my images from lightroom 5 were associated with bad images.  I found this after I exported the entire catalog.  How do I re - associate images so that the corrections that I made are to correct pictures?

  Thank you!

  I found the solution... I renamed all the files and made Lightroom force me to reassociate the preview images again.

• I just bought the bad image, and how to download.

  Hi, I just tried to upload a picture, but somehow ended up buying another. I'm sure you can see I did not download the image again, can I get my money back and lock you again, this image or what you have to do so I can get the image I want to please?  In addition, after I purchase an image or a vector how to download it? I thought it would be similar to shutterstock.

  Hi Luis,.

  According to our records, you have bought only a picture of the plan on request. So, you mean you bought the wrong picture? Is - not whatever you want world map - image | Adobe Stock ?

  I know the other image you want to buy?

  In addition, it is easy to upload pictures. Please see--> -free images use Adobe Stock | Tutorials Adobe Creative Cloud

  ~ David

• the bad image error

  Hello everyone, I wrote an iso file to a dvd + r disc, but I can't run it. I got an error: the application or dll \sources \spwizeng.dll D: is not valid windows image. Please check this against your installation diskette.

  I tried to delete the file spwizeng.dll but I don't know how to cancel registration is in the drive. What other ways to solve this problem?

  First of all, you won't tell us anything on your system or you are trying to do.

  As you send your message in the Windows XP forums, it must have something to do with Windows XP, right?

  Second of all, if you have something to a burned CD/DVD you can't delete files from a CD/DVD.

  Thirdly, the spwizeng.dll is not a registrable DLL.  Just because a file has an extension DLL does not mean it can be or must be registered.

  Fourth, if you perform a Google search on your message, you will find a lot of related topics on the Internet about similar messages and they seem to relate to any attempt to install Windows 7/8 of an ISO file downloaded which might be corrupted - that's what you try to do?

  You can browse through some of the Google search results and see if they are useful. Some people have been able to understand, and the topics of discussions are quite ridiculous.

  Click on the following link to begin:

  http://bit.LY/1wDe6WR

• Since my last windows update, whenever I open firefox, I get an error message saying BAD IMAGE on the C:\windows\system32\WRusr.dll file. Can you help me?

  The message I get is:

  "C:\WINDOWS\SYSTEM32\WRusr.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your administrator or the provider of support software. »

  I can't open Mozilla firefox more. I tried reinstalling 3 times already.

  I have reintalled webroot and everything seems fine now.

• quality of the bad image after place in muse

  Hello

  I placed my high quality images in muse and narrowing in small side to display on the page. But after I have write my site, these images will appear so blurry with a very poor quality. Someone knows the answer?

  Also, is there a way I can enter muse Adobe PDF file? It seems to have much better quality too.

  Thank you!

  S

  You can find this thread helpful: Re: my images blurry when I export or publish my site of Muse. Why and how do?