Error on admin password recovery and disk Windows XP Configuration

Similar Questions

• error code80004002 when I try and download windows updates

  get error code 80004002 when I try and download windows updates on my windows vista 64-bit system...  Have tried windows repair and this does not help, any other ideas?

  Fix it what particularly did you try?

  http://support.Microsoft.com/kb/956708

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»

  also

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-Error-80004002
  This link applies to Windows vista.

• forgotten my admin password side and have no window 7 DVD or USB. has another user on but on access limited

  I have a laptop Toshiba Satellite with Windows 7 home premium. the password of admin a week or two there are dated, but I forgot the password and did not drive to retrieve it... There are another 2 user account on what I can access (via a now) can someone please tell me how to get it back?

  any advice would be greatly appreciated...

  Thanks in advance

  I have a laptop Toshiba Satellite with Windows 7 home premium. the password of admin a week or two there are dated, but I forgot the password and did not drive to retrieve it... There are another 2 user account on what I can access (via a now) can someone please tell me how to get it back?

  any advice would be greatly appreciated...

  Thanks in advance

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the CD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you changed the password.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

  Since you do not burn a CD to repair Windows, you will need to ask a friend to burn you. It takes less than five minutes through Control Panel / backup and restore.

• How do I erase all user accounts when the admin password forgotten and lost the password reset disk?

  Me and my girlfriend bought someone's Office to his work and the admin has forgotten his password and the user to reactivate remind her and we have been able to remove his password and we can not get his password reset.

  Frankly - regardless of the many ways of hacking, it - format (I would even zero-write of disc/low level format her) and install the operating system and all applications that you PROPERLY.  You have no way of knowing what he remained there from the previous user and probably don't want to know/take the chance.

• Password Recovery HELPPPP! Window Vista

  Windows Vista: lost password and should be retrieved as soon as possible!

  This is the problem...

  I forgot my password for the administrative account and it has been almost a year since the accident. Tried many possible passwords and combinations that I can remember and think, but it did not work.

  Right now, I'm using the local account user...

  I lost my disk to reinstall :/ and asked most of my friends and people to help me and all their answers are the same.

  It's either all reset back to factory State * or the system restore and I can not!

  or use the password reset disk? I do not know about it until what someone told me about this = _ = and then I figured out it's too late...

  and someone told me about 'safe mode' but I don't know where or what.

  and now I'm stuck! on the local user and can't do anything... Cannot download and...-.-just nothing...

  I am a beginner on computers, only know how to download things... and to play games and write stories

  Please help me on this: () I feel very stupid and don't know what to do...

  Is there anyone who had this same problem before or big on technical issues and recoveries and will help me in this mission?

  Restore factory is certainly a good idea, and in most cases, you don't have even a disc, because at the time of Vista, most computers had the integrated hard drive recovery partition. You just restart, press a special key (depending on the manufacturer of the PC) and start the restore.

  But in Safe Mode can help you too.

  If there is no administrator account on the system, you can start safe mode to access the built-in Administrator account.  Since this fail-safe account, you can force - reset your account password.

  1. Turn off the computer.
  2. Turn it on and start immediately typing F8.  When the boot options is displayed, select Mode safe mode with networking.

  Now that you are in safe mode, you can use the backup Administrator account built for perform you a necessary recovery. Built in Administrator account should not be used for any other purpose, or it is not available in such situations when you need it.

  1. On the login screen, select the administrator account.
  2. Open Control Panel / user accounts.
  3. Select manage another account, and then select the account you want to switch to an administrator account. You can also use the option change password here to reset the password of the other account.

  When finished, restart the computer normally.

• Satellite L40 - 10 q - Admin password recovery is not accepted

  Hello

  I want to reset my laptop hard drive recovery function, but when I come to step 3, where it lay on my user name and password, it won't work. I have the username and password that I use to log on windows with. Then he said: ' administrator account is disabled and wrong password.

  What should I do? Help!

  Model: Toshiba satellite L40-10 q

  It's very strange. Are you sure that you have entered the right password? Be careful with Y and Z.

  What you can do is to install the OS by using recovery DVDs.
  You have created one using the preinstalled Toshiba recovery disc creator?

• Boot or admin password recovery for a 2000 HP

  Hello

  I'm working on a wipe and reload a laptop HP 2000.  The owner forgot the admin or start the password, and after that 3 attempts it gives the code "66233711".

  What is the way before on that?

  Thank you

  Kevin

  Hi Kevin

  Try this: 79191337

• Compared Presario CQ56: Cannot go beyond password Admin password page and power on

  Im trying to reset a computer I bought awhile I there, but when I start a screen comes up asking me a password for admin or a power on password and I don't know or and when I try and open the BIOS nothing happens little whatever I click on one when I get the wrong password several times he says "disabled system [57740588] I tried to." the age, nothing works someone can help me.

  @AhmedA

  Enter 48628508

  Kind regards

  DP - K

• HP Pavilion DV8el Entertainment recovery and disk partitioning C

  Someone must have done this before, but I can't find anything...

  I had to replace the C drive of bad sectors, and now the recovery disks that I had done three years ago crash with a blue screen on the partitioning of the disk.

  Nothing can be installed via that * beep * discs (i.e. of the news because I've never used it before!)

  I get clean up a ghost image of the entire disk C (it has been corrupted), the partition partition, so I really want to use it to recover my configurations and software. But I don't know how to do this without going through the ununseable recovery disks.

  The problem seems to be that Ghost is looking for the four original scores and since he can't find them he does not know where to install the data C... Can I manually partition C? I have a Mint 13 Linux system on a bootable USB, so I can ride and the C format, I just need to know HOW (HIDDEN FAT32, NTFS,...) and what size/flags to give partitions...

  I hope someone can help! Thanks 1million, Gabriele

  I understand that you need to restore the software from your system after replacing the HARD drive.

  You mentioned that you have a ghost image.  Are you referring to Norton Ghost?  If so, what version of Ghost was used to make the image?

  If you don't have a ghost, this thread may be useful for you.

  http://community.Norton.com/T5/other-Norton-products/how-do-I-restore-ghost-image-to-a-new-hard-drive/TD-p/540018

  In addition, this document covers restoring a Ghost image on a new disk using Ghost 15.

  https://support.norton.com/sp/en/us/home/current/solutions/kb20091020110134EN_EndUserProfile_en_us;jsessionid=3DE48EAE3B4F8EA0695FA93DEED39621.4?entsrc=redirect_pubweb%EF%BB%BF&product=home&pvid=f-home&version=1

  I suspect that the process is similar for other versions of Ghost.  Once I have the exact version of Ghost, I'm able to find something more specific to your version of Ghost.

• Admin password recovery

  Hi I am trying to install Win 8 and need the administrator password to access the BIOS.  Here's what I get "system disabled [83636754] Please suggest what can be done."

  Hello

  Enter: 32794390

  Kind regards

  DP - K

• Download went well but I get a message about rights error (even connected as administrator) and disk space (though there is a lot) when I try to run the .exe and extract the files.

  TI help says that the installation program has been altered. Back I'm going to see if I can download it again and get a clean version.

  Thank you, Jeff. It was a problem of corruption .exe. Downloaded a clean and install will now fine, no error message on the rights or any other issue.

• Admin Console - requires that the user Admin password and user name valid

  I am running FMIS4.5 on CentOS5.5

  FMIS runs and I can connect via Flash Media Encoder.

  Displays and Web administration console: 1111 gives the xml output, however

  During the use of the user and the password in my xml files to connect (tests with ping), I get the error "user Admin password and valid user name required.

  conf/FMS.ini:

  ###########################################################################

  # fms.ini contains alternative to Flash Media Server variables #.

  # the configuration files. Lines beginning with ' # ' are considered comments.  #

  # A variable substitution is in the form < name > = < value >. All the way to #.

  # the first '=' is considered the substitution variable name and #.

  # everything after the first '=' is considered the substitution value. If #.

  # you want a substitution variable to have beginning or trailing spaces.

  # include double quotes around the value. For example, foo ="bar" #"

  ###########################################################################

  ###############################################################

  # This section contains configurable settings in the Server.xml file #.

  ###############################################################

  # Username admin server

  # For example:

  # SERVER. ADMIN_USERNAME = foo

  #

  SERVER. ADMIN_USERNAME = Admin

  SERVER. $admin_password = str34m1ng

  # Port and Flash Media Admin Server IP address must listen to

  # For example:

  # SERVER. ADMINSERVER_HOSTPORT =: 1111

  #

  SERVER. ADMINSERVER_HOSTPORT =: 1111

  # User Id in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_UID = 500

  #

  SERVER. PROCESS_UID = 500

  # GID in which to run the process (Linux only)

  # For example:

  # SERVER. PROCESS_GID = 500

  #

  SERVER. PROCESS_GID = 500

  # Key license for Flash Media Server

  # For example:

  # SERVER. LICENSEINFO = XXXX-XXXX-XXXX-XXXX-XXXX-XXXX

  #

  SERVER. LICENSEINFO = #SORRY YOU DON'T GET TO SEE THIS #.

  # LIVE_DIR is the full path of the sample application 'Live '.

  folder # to store any live streams recorded by the server.

  # For example:

  # LIVE_DIR = \applications\live < FMS_Installation_Dir >

  #

  LIVE_DIR = / opt/adobe/fms/applications/live

  # VOD_COMMON_DIR is the full path to the sample application "VOD".

  folder # to the storage on demand and progressive download of fichiers.flv/.mp3.

  # File stored in this folder can be listened to and are also available PD.

  # Note: If you use the installation default Apache as a Web server.

  # If you change VOD_COMMON_DIR and please change the document root

  # in the httpd.conf file accordingly.

  # For example:

  # VOD_COMMON_DIR = \webroot\vod < FMS_Installation_Dir >

  #

  VOD_COMMON_DIR = / opt/adobe/fms/webroot/vod

  # VOD_DIR is the full path to the sample application "VOD".

  folder # to store only the fichiers.flv/.mp3 on request. Files stored in

  # This file are not PD-able

  # For example:

  # VOD_DIR = \applications\vod\media < FMS_Installation_Dir >

  #

  VOD_DIR = / opt/adobe/fms/applications/vod/media

  # The maximum size of the FLV cache, in megabytes.

  # The default is 500 MB.

  #

  SERVER. FLVCACHE_MAXSIZE = 500

  # To start and stop the server HTTP included throughout

  # with FMS.

  #

  SERVER. HTTPD_ENABLED = true

  ################################################################

  # This section contains configurable settings in Adaptor.xml #.

  ################################################################

  # Application to the virtual host directory

  # For example:

  # VIRTUAL SERVER. APPSDIR = C:\myapps

  #

  VHOST. APPSDIR = / opt/adobe/fms/applications

  VHOST. ALLOW all =

  ####################################################################

  # This section contains configurable settings Application.xml #.

  ####################################################################

  # List of semicolon delimited paths of research for loading script

  # For example:

  # APP. JS_SCRIPTLIBPATH = C:\scripts; C:\Program Files\Foo\scripts

  #

  APP. JS_SCRIPTLIBPATH = / opt/adobe/fms/scriptlib

  ###############################################################

  # This section contains configurable settings in Logger.xml #.

  ###############################################################

  RECORDER. LOGDIR =

  ####################################################################

  # This section contains configurable settings in Users.xml #.

  ####################################################################

  # Enable or disable using HTTP requests to run admin commands.

  # The value "true" to enable, otherwise it will be disabled.  The

  actual orders # allowed for the server admin and admin of the virtual host

  # users can be defined in Users.xml.

  USERS. HTTPCOMMAND_ALLOW = true

  Users.XML:

  < root >

  < UserList >

  <!-this tag defines a server administrator. ->

  < username = ' ${SERVER.» ADMIN_USERNAME} ">"

  <!-salted Hash of the password for the administrator of the virtual server. ->

  < password encrypt = "false" >$ {SERVER. $admin_password} < / password >

  <!-this administration cannot connect to the server of the-> specified

  <!-hosts. This is specified as a comma-delimited list.

  <!-host names or domain names and/or (full or partial) IP->

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  <>allow all < / allow >

  <!-this admin is unable to connect to the server from all the...

  <!-specified hosts. This is specified as a list by commas->

  <!-the name of host or domain names and/or IP (full or partial) - >

  <!-addresses. For example,-->

  <!-"foo.yourcompany.com, macromedia.com, 10.60.1.133, 10.60" - >

  < deny > < / nie >

  <!-specifies the order in which evaluate < Allow > and ->

  <!-< Deny > tags. This can be 'Allow, Deny' or 'Deny, Allow '. The - >

  <! - default is 'Deny, Allow', which means that access is allowed - >

  <!-unless specified in < Deny > < Allow > and not.     ->

  < order > allow, deny < / order >

  < / user >

  < user name "janedoe" = >

  < password encrypt = "false" > S4mpl3P4ss < / password >

  allow <>< / allow >

  < deny > < / nie >

  < order > allow, deny < / order >

  < / user >

  < / UserList >

  < AdminServer >

  < HTTPCommands >

  <!-turn on or off using HTTP requests to run admin commands.     ->

  <!-set "true" to enable, otherwise it will be disabled.  The - >

  <! - actual orders allowed for server admin and admin of the virtual host - >

  <!-users can be defined in allow it and deny elements.                                   $

  < activated >$ {USERS. HTTPCOMMAND_ALLOW} < / activate >

  <!-list orders admin server accessible through HTTP.         ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders (it is not recommended to allow orders).          ->

  <!-Separate multiple commands with commas.                              ->

  Ping < Allow > < / allow >

  <!-list of orders admin server refused access via HTTP.                ->

  <!-add several commands separated by commas.  'All' indicates->

  <!-all orders.                                                       ->

  < deny > all < / deny >

  <!-processing order for refuse and allow command lists.  'Deny, allow' - >

  <!--means that the command will be permitted if the order is allow-->

  <!-list or not in the deny list.   'Allow, Deny' means the--> command-line

  <!-will be allowed if it is in the allow list and not in the - >

  <!-list of deny.                                                           ->

  < order > deny, allow < / order >

  < / HTTPCommands >

  < / AdminServer >

  < / root >

  Exit the: admin/1111/ping? auser = Admin & apswd = str34m1ng:

  < result >

  errorof the < level > < / level >

  < code > NetConnection.Connect.Rejected < code >

  < description > Admin user requires valid user name and password. < / description >

  < timestamp > Thursday, May 17, 2012 11:33:43 AM EDT < / timestamp >

  < / result >

  Links do not work for localhost and external connections and the fms_adminConsole.htm (.swf) fails as well.

  Any help is appreciated!

  Hey Jon,

  Please take a look at this. Should help.

  http://forums.Adobe.com/message/4346847#4346847

  Thank you.

• Haven't forgotten admin password no disc reset

  I have a windows 7 starter net book (laptop) and I forgot my password, I'm the only adminstrater of computer and I do not have a password reset disk so I can't do something. What should I do?

  Microsoft's policy won't cover no password recovery and cracking but if you have backups of data you might clean install. BUT clean install would lead all LOST data.

• Everyone is dismayed to see that there is no password recovery or reset secure put in place for encrypted backups?

  I am absolutely amazed that there is no recovery password for iPhone backups encrypted.

  (1) no password is required to access the iTunes application. He launched and the phone connects automatically.

  (2) someone might maliciously put a password. The password for Mac or device using iTunes OSx need at least before setting the encryption password.

  (3) there is no recovery option. None. Tell me: what password-protected sensitive data have NO option of recovery? No secret questions, no e-mail link, no OSx password, nothing. It's horrible.

  I'm in a situation where I remember not the password, and even if I had the foresight to write it somewhere, that the hard copy has disappeared. I suffer a miserable condition where I lose memory. I have reset passwords on all my stuff course often. That's just my new reality.

  I am faced with a situation where if I ever need to restore my device or upgrade to a new, I won't lose all my old texts and local health data in my applications (which is essential for a person with health problems). The loss of memories of conversations for a person who relies on these devices, precisely because I lose my memory is a slap in the face.

  What the risk of COMPUTER audit team approved this feature, Apple? It's quite incredible that a company of your size would be created people to fail like this. Please post a fix in iTunes for password recovery and substitute it. PLEASE, I BEG YOU.

  N ° if there is a way to recover or reset, the encryption would be completely useless.

  Exercise good security practices on the computer where you have installed iTunes and you will not you care about someone maliciously setting a password for backups.

• How to confirm admin password restore actually works?

  So I just corrected is logged into my admin account, see this link for more information:

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/ReadyNAS-ultra-6-OS-reinstall-appears-to-have-n...

  My question is about the admin password recovery in place. I lost access because I used the password successfully recovery screen, but has not received an email from recovery to the specified recovery e-mail account.

  So what is sending the e-mail of recovery? Is it possible to test the recovery email delivery without resetting the admin password?

  Under system > alerts.

  You can send a test message to verify that the e-mail settings are functioning.