Error: "one of the drives should be checked for consistency" to start the computer

Similar Questions

• get one of your drive should be checked for consistency

  I have windows 7. Yesterday windows live essentails updated on my computer. I went out and went - there was a brief break and my computer was not shut down cleanly. When I restarted the... one of your drives should be checked for consistency c drive came. I pass through and every time it gets stuck at halfway through step 2 and don't cross. I have to turn off the computer to the power source.

  Maybe it helps

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/a7d5c759-c8c6-49cc-80af-589e28f13a65/

  Or

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html (method 2)

• Help me to get rid of what I get a message on a blue screen that staes that one of my drives should be checked for consistency

  By turning on my PC, I get a message on a blue screen which staes that one of my disks needs to be checked for consistency. It gives me the option to cancel within 10 seconds after which it loads normally but the screen seems suspicious. Someone at - it ideas?

  Microsoft does not send messages to you directly to your PC. The message arrives directly from your own PC.

  Click on the link on how to perform a disk check and continue with it.

  http://support.Microsoft.com/kb/315265 how to perform disk error checking in Windows XP

• "Your drive should be checked for consistency.

  Hello

  I was wondering if you could help us?  I am running Vista on a Dell laptop and recently have been receiveing "your drive should be checked for consistency" at the start - it, then crosses the chkdsk to BACK process.  It goes through the process very well, deleting some files and move others. However, once I have connected to Windows, my laptop does work for a few minutes before freezing completely upwards. I thought it was just streaming elements that aggravate freeze it, but it seems to freeze no matter what I do.  I continue to have force a switch to stop/off that I can't even restart.

  Its been my computer completely unusable - is there something I can do to solve this problem, apart from buying a new one?

  Thank you!

  Katie

  Thanks - how could I do?  Is this a hardware problem?

  Sounds like it... You said, "it goes through the process very well, deleting some files and moving others." which tells CHKDSK is to find questions and tries to compensate for them.  However, who can only go so far and if there are internal physical damage on the disc itself (disk drive I guess - not an SSD) then the damage could extend.  Sooner or later, you might get to a point where you don't even have the option to boot.

  What your backups?

  You can find the manufacturer of the hard drive itself and get their diagnostic utilities and test the drive entirely with those.  That will tell you if you have real bad sectors and like it or whether a zero and writing with their utility and the new installation of the operating system could help.  It is more likely that it is a pity however.

• Should be checked for consistency

  I received the following message during the time I turn on my computer, "one of your drives should be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press a button within 10 seconds. »

  Then I press any key to cancel, but restart the computer again and the same message on the screen shows. Please let me know how I can fix this problem, thanks.

  After a regular stop. Turning off too soon may cause chkdsk run. But I guess you do.

  Interestingly, something different may be at stake.
  http://support.Microsoft.com/kb/831374 tells a similar message if there are too many files on the disk and that you are not running the latest service pack.

  If this happens during more than once then-
  Well, if it was the 1st time in 2nd or 3rd then maybe you don't shut down the computer properly, can you just don't let the scan disk utility (the tool that checks your hard drive for consistency) to complete its work when the pc starts. But if this is not the case, then maybe your hard drive has developed bad sectors, or there may be another problem with him.

  To check the conditions weather, the above is true then right-click on the drive on which is checked at startup and select scan disk. See the results and you will probably notice the problem yourself.

• Windows 7 - after an update, receive 'records should be checked for consistency.

  Since this update, when I start windows, I get a message saying disks should be checked for consistency. Messages to appear that I have create a restore but then disappear until I can read. Windows starts normally. My Norton diagnostic report said that there is a problem in the C: Partition.

  Thanks to all who responded, but I contacted support Norton and they have managed to solve the problem very quickly.

• "Error - disk should be checked for consistency", computer does not complete check of the disk system.

  Original title: computer refuses to perform disk full system check.

  After that I turned on computer always run a check disk systems saying 'need to drive to check for consistency', it stops at 82%, the disc makes noise.  It is said that he replaced bad clusters in file and after checking the window/options/install/win_18.CAB, it stops there.  She always checks the drive C. Checked for viruses, no.  Any ideas?

  Hi DanaCox,

  You did it of any material changes or software on the computer before this problem?

  I suggest you chkdsk from the Recovery Console and check if the problem persists.

  At the Recovery Console prompt, type which Suits, and then press ENTER:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  
  Reference: How to install and use the Windows XP Recovery Console

  To start the computer and use the Recovery Console

  Hope the helps of information.
  Please post back and we do know.

• I can't get my internet to open using my wireless connection, what should I check for?

  I can't get my internet to open using my wireless connection, what should I check for?

  Hi RosaSchiroo,

  1. are you able to access internet via wired connection?

  2. have you done any hardware changes or software on your computer before this problem?

  3. you receive an error message or code?

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.
  Please post back and we do know.

• I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

  I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

  Original title: Chameleon engine

  I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

• Hello, the following problem, I use a PC, can not use Photoshop, you get the text following error message on the computer-Adobe Photoshop CC 2015 has stopped working "close the program". have uninstalled and installed a number of times, but the CC2015 wil

  Hello, the following problem, I use a PC, can not use Photoshop, you get the following error message on the computer-Adobe Photoshop CC 2015 has stopped working " ", "the program '. '. have uninstalled et installed a number sometimes but the CC2015 does not start anyway. Soren

  Please see:

  Re: adobe photoshop cc 2014 has stopped working in windows 8

  Re: Photoshop CC 2015 has stopped working

  https://www.YouTube.com/watch?v=0OUdIZT7C2E

  I hope this helps.

  Concerning

  Megha Rawat

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• computer keeps freezing. When I restart, it checks for consistency.

  original title: computer keeps freezing. When I restart, it checks for consistency. who is wrong?

  my computer keeps freezing all the time. When I turn it off and turn it back on I get tell screen

  audit system C type NTFS file system for consistency

  CHKDSK checking files and index

  She then removes and retrieves a number of files. also every now and them my computer just stops saying its to protect my computer.

  can someone help and tell me what is the problem and how can I solve this problem?

  Here is the correct information on how to set your computer to another date and time.

  The other poster told you how to make a backup of files!

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• Error: One of the USB devices attached to this system has malfunctioned, and windows does not recognize it.

  tried already everything written here. When I plug my USB device (3 of them) my Windows a sad of the USB devices attached to this system has malfunctioned, and windows does not recognize it. I tried plugging it into another winXP machine, it won't work. Can you help me?

  Original title: usb malfunction

  His salvation,

  Thanks for posting your query in Microsoft Community Forum.

  1. What are the troubleshooting steps you have tried so far?
  2. If it works much earlier? If so, did you do changes on the computer before this problem?
  3. What type of USB device you are using?

  As you mentioned that the USB device does not work when plugged into a WinXP machine, it may be a problem with the device itself. In addition, the question may also arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows.

  Therefore, I suggest you try the following methods (skip the ones that you already tried) and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  If the device fails after updating the driver, you can try to roll back the driver with its previous version.

  Restore a driver with its previous version

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• get this error, "one of the software components required,"ms_lbfo"is missing in the system. Please make sure that you use a Server SKU, and no OS components have been uninstalled

  Original title: Windows Server NIC 2016

  Im trying to set up the consolidation of network cards on Technical preview of windows server 2016 3, build 10537 and I get this error message, "one of the software components required,"ms_lbfo"is missing in the system. Please make sure that you use a Server SKU, and no OS components have been uninstalled. »

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum