Error: ORA-29283: invalid file so that registerdatabase operation

Similar Questions

• SYS. Question UTL_FILE survey ORA-29283: invalid file operation

  We have a cron to demand that gives the State of the database in our emails. Recently we have cloned the instance, and all by doing this, we bounced back the entire server.
  
  After that we stopped getting emails of this instance. When I checked the crontab file and run the scripts manually. It showed the following error.
  
  SQL > alter session SET smtp_out_server = "xxxx1:100";
  declare
  v_utl_filehandler UTL_FILE. TYPE_DE_FICHIER;
  v_rawfile RAW (32767).
  v_size NUMBER;
  5 v_block NUMBER;
  6 v_boolean BOOLEAN;
  v_file_dir varchar2 (100);
  7 8 v_transfer_location varchar2 (100): = "[email protected], [email protected], [email protected];
  9 v_file_name varchar2 (100): = "mailattachment.doc";
  10 starts
  11 v_file_dir: = "MAIL_DIR";
  12 v_utl_filehandler: = UTL_FILE. FOPEN (v_file_dir, v_file_name, "r");
  13 UTL_FILE.fgetattr (v_file_dir, v_file_name, v_boolean, v_size, v_block);
  14 UTL_FILE.get_raw (v_utl_filehandler, v_rawfile, v_size);
  15 UTL_FILE. FCLOSE (v_utl_filehandler);
  16
  17 sys.utl_mail.send_attach_raw (sender = > '[email protected]')
  18, recipients = > v_transfer_location
  19, subject = > 'database of status of EBS UAT.
  20, message = > "Dear Sir". CHR (13) | CHR (13) |
  21 ' Please find attached file database state of EBS UAT. "| CHR (13) | CHR (13) |
  22 'thank you ' | CHR (13) |
  23 ' oracle@UATDB1'|| CHR (13) | CHR (13)
  24, attachment = > v_rawfile
  25, att_inline = > FALSE
  26, att_filename = > v_file_name
  (27);
  28 end;
  29.
  declare
  *
  ERROR on line 1:
  ORA-29283: invalid file operation
  ORA-06512: at "SYS." UTL_FILE", line 536
  ORA-29283: invalid file operation
  ORA-06512: at the level of line 12
  
  It was working fine before the cloning.
  
  Published by: Gerard may 24, 2012 11:52

  I guess that the problem is caused by

  v_utl_filehandler := UTL_FILE.FOPEN(v_file_dir, v_file_name, 'r');
  

  Is the path to the directory "MAIL_DIR" exists in your database server?
  The file 'mailattachment.doc' exists in this path?
  You have read access to this path?

  You can check the path of the directory with:

  select * from all_directories where directory_name='MAIL_DIR';
  

  When the directory does not exist in this table, you need to create (such as s/n):

  CREATE DIRECTORY MAIL_DIR AS 'yourdirectory';
  

  To grant read access to the DBA, you need:

  GRANT READ ON DIRECTORY MAIL_DIR TO ; 
  

  (Overall precondition is that the oracle user (operating system - the user running your oracle instance) can access the given directory).

  Published by: hm on 23.05.2012 22:52

• ORA-29283: invalid file operation

  Hi friends,
  I m getting ORA-29283: invalid file operation. I tried to use create directory option as well. I have to wriite the file to a specific location determined by the system setting
  even I tried to write by specifying the path setting and direct read/write permision he throw the error.any even input will be highly appreciated.
  Thank you
  Create or replace procedure (table_csv)
  in_succ_fail IN kcc_case_trans_fin_audit.success_or_fail%type by default NULL
  in_team_id IN kcc_case_trans_fin_audit.ounit_identifier_kt%type by default NULL,
  in_run_reference IN kcc_case_trans_fin_audit.run_reference%type by default NULL,
  )
  IS
  
  v_file_path varchar2 (100) default Null;-to contain the path
  v_file_name varchar2 (100) default Null; - to hold the name of the file
  v_file_name_component varchar2 (20) default Null; - to contain the part of file name
  v_string varchar2 (4000) default Null;
  v_actual_start_date PROVISIONS.actual_start_date%type;
  v_actual_end_date PROVISIONS.actual_end_date%type;
  v_provid_identifier PROVISIONS.provid_identifier%type;
  v_citem_identifier PROVISIONS.citem_identifier%type;
  v_start_date COST_COMMITMENTS.start_date%type;
  v_end_date COST_COMMITMENTS.end_date%type;
  v_ccentr_identifier COST_COMMITMENTS.ccentr_identifier%type;
  v_ccreas_identifier COST_COMMITMENTS.ccreas_identifier%type;
  v_meaning coded_cost_reasons.meaning%type;
  v_cost_centre_code cost_centres.cost_centre_code%type;
  v_sch_start_date schedules.start_date%type;
  v_sch_end_date schedules.end_date%type;
  v_schedule_type schedules.schedule_type%type;
  v_she_ccentr_identifier schedules.ccentr_identifier%type;
  v_she_cost_centre_code cost_centres.cost_centre_code%type;
  v_success_or_fail kcc_case_trans_fin_audit.success_or_fail%type;
  v_file_audit UTL_FILE. TYPE_DE_FICHIER; -File pointer variable
  File_Exception Exception; -User-defined exceptions
  
  Cursor cur_kctfaudit is
  Select ID, krestr_identifier, person_identifier,.
  ounit_identifier_kt, new_ccentr_identifier
  provis_identifier, ccommi_identifier, schedu_identifier
  success_or_fail, error_message, run_reference
  of kcc_case_trans_fin_audit
  where success_or_fail = in_succ_fail
  or ounit_identifier_kt = in_team_id
  or run_reference = in_run_reference;
  Begin
  -To get the location of the directory, and then to make the name of the file.
  v_file_path: = Adf_Getparam ('END', 'RFDR');
  Select to_char (sysdate, 'ddmmyyhhmi') in the double v_file_name_component;
  v_file_name: = 'kcc_restr_fin_audit_ ' | v_file_name_component |'. CSV';
  If v_file_path is null then
  Raise FILE_Exception;
  End if;
  -If the system "END/RFDR" parameter is not set then do not pass further and get out
  If v_file_path is not null then
  v_file_path: = v_file_path | » \';
  v_file_audit: = UTL_FILE. FOPEN (v_file_path, v_file_name, 'W');
  -v_file_audit: = UTL_FILE. FOPEN ("C: \ KCCTEST', v_file_name, 'W'");
  -If the file to write has been opened successfully
  IF utl_file.is_open (v_file_audit) THEN
  -loops through each line of the file
  I'm IN cur_kctfaudit LOOP
  -The value null if the provis_identifier on the case_tran_fin_audit is null.
  
  -a code here...
  
  -to build the string with all the information to write to the file
  
  v_string: = i.identifier | ','
  || baf_name_list (i.person_identifier, 'P'). ','
  || baf_name_list (i.ounit_identifier_kt, 'P'). ','
  || i.new_ccentr_identifier | ','
  || v_sch_start_date | ','
  || v_sch_end_date | ','
  || v_schedule_type | ','
  || v_she_cost_centre_code | ','
  ||     v_success_or_fail | ','
  || i.ERROR_MESSAGE | ','
  || i.krestr_identifier;
  UTL_FILE. Put_line (v_file_audit, v_string, autoflush = > true);
  END LOOP;
  
  DBMS_OUTPUT. Put_line (' file Created: ' | v_file_name);
  UTL_FILE. FCLOSE (v_file_audit);
  END IF;
  
  END IF;
  EXCEPTION
  WHEN utl_file.invalid_mode THEN
  RAISE_APPLICATION_ERROR (-20051, 'invalid parameter Mode');
  WHEN utl_file.invalid_path THEN
  RAISE_APPLICATION_ERROR (-20052, 'Invalid File Location');
  WHEN utl_file.invalid_filehandle THEN
  RAISE_APPLICATION_ERROR (-20053, 'no valid Filehandle');
  -WHEN utl_file.invalid_operation CAN
  -RAISE_APPLICATION_ERROR (-20054, "Invalid File opération");
  WHEN utl_file.internal_error THEN
  RAISE_APPLICATION_ERROR (-20057, 'internal error');
  WHEN utl_file.charsetmismatch THEN
  RAISE_APPLICATION_ERROR (-20058, 'Open with FOPEN_NCHAR but later IO inconsistent');
  WHEN utl_file.file_open THEN
  RAISE_APPLICATION_ERROR (-20059, "file already open");
  WHEN utl_file.invalid_maxlinesize THEN
  RAISE_APPLICATION_ERROR (-20060, 'Row size exceeds 32 K');
  WHEN utl_file.invalid_filename THEN
  RAISE_APPLICATION_ERROR (-20061, "Invalid File Name");
  WHEN utl_file.access_denied THEN
  RAISE_APPLICATION_ERROR (-20062, "file access denied by ');
  When FILE_Exception then
  RAISE_APPLICATION_ERROR (-20002,' system END/RFDR parameter is not defined.) Set the system and try again! ');
  dbms_output.put_line (' system END/RFDR parameter is not defined.) Set the system and try again! ');
  WHILE others THEN
  -dbms_output.put_line (sqlerrm);
  RAISE_APPLICATION_ERROR (-20099, "UTL_FILE Unknown Error");
  
  END table_csv;

  29283, 00000, "invalid file operation"
  // *Cause:  An attempt was made to read from a file or directory that does
  //          not exist, or file or directory access was denied by the
  //          operating system.
  // *Action: Verify file and directory access privileges on the file system,
  //          and if reading, verify that the file exists.
  

  I have confidence in Oracle reports reality of the more acurrately, you.
  View simplified code that produces the error and after CUT PASTE & showing evidence why Oracle is bad.

• ORA-29283: invalid file operation, SP2-0103: nothing in the SQL buffer to run.

  Hi gurus of the Oracle,.

  Our version of oracle's 11 g RAC 2.

  We write records into a file using utl_file.

  According to the request, data should write to 160 files.

  After writing to 50 records, his mistake to launch. as

  BEGIN PROC_WRITE_TO_FILE; END;

  *

  ERROR on line 1:

  ORA-29283: invalid file operation

  ORA-06512: at "SYS." UTL_FILE", line 536

  ORA-29283: invalid file operation

  ORA-06512: at "TEST. PROC_WRITE_TO_FILE', line 130 '.

  ORA-06512: at line 1

  SQL > SP2-0103: nothing in the SQL buffer to run.

  My procedure is

  -DECLERATION

  BEGIN

  OPEN C2;

  LOOP

  EXTRACT THE C2 IN P_WRITE;

  WHEN THE EXIT C2% NOTFOUND;

  L_NAME: = "WRITE" | P_WRITE | » _. TXT';

  L_FILE: = UTL_FILE. FOPEN (L_DIR, L_NAME, 'W');

  OPEN C1 (P_WRITE);

  LOOP

  FETCH C1 INTO P_OD_PLACE, P_OD_USER, P_ED_PERF, P_GM_LST, P_GM_FIRST, P_GM_MOD, P_GM_SUFF, P_BD_NUM, P_BD_FRET, P_BD_UNIT, P_BD_GOLE, P_BD_GEP, P_DAT_BOD, P_DAT_EFF, P_ED_RACE, P_ED_GENDER, P_LAND_DIST, P_LAND_LOT, P_ED_STAT_REASON ,P_OD_PRECINCT,P_OD_JANI_PREC,P_NB_PIST_CNG,P_NB_PIST_SEN,P_NB_PIST_VASER,P_NB_PIST_JUD,P_NB_PIST_COMMI,P_NB_PIST_SCHOL,P_NB_PIST_WD,P_NB_PIST_JANIB,P_NB_PIST_JANIC,P_NB_PIST_FIRE,P_NB_PIST_SCHOB,P_NB_PIST_SUPCM,P_NB_PIST_WATBD,P_NB_PIST_GOLEL P_GM_NAME, P_ED_JANI_CODE, P_DAT_ACCEPT, P_DAT_CHANGED, P_OD_COMBO, P_TX_DESC, P_DAT_LST_CTT, P_BD_NUM2, P_BD_FRET1, P_BD_UNIT2, P_BD_GOLE2, P_BD_ST, P_BD_GEP5, P_BD_GEP4, P_BD_FRET2, P_BD_FRET3, P_BD_COUNTRY;

  WHEN EXIT C1% NOTFOUND;

  UTL_FILE. PUT_LINE (L_FILE, P_OD_PLACE: ' |) ' || P_OD_USER |' | ' || P_ED_PERF |' | ' || P_GM_LST |' | ' || P_GM_FIRST |' | ' || P_GM_MOD |' | ' || P_GM_SUFF |' | ' || P_BD_NUM |' | ' || P_BD_FRET |' | ' || P_BD_UNIT |' | ' || P_BD_GOLE |' | ' || P_BD_GEP |' | ' || P_DAT_BOD |' | ' || P_DAT_EFF |' | ' || P_ED_RACE |' | ' || P_ED_GENDER |' | ' || P_LAND_DIST |' | ' || P_LAND_LOT |' | ' || P_ED_STAT_REASON |' | ' || P_OD_PRECINCT |' | ' || P_OD_JANI_PREC |' | ' || P_NB_PIST_CNG |' | ' || P_NB_PIST_SEN |' | ' || P_NB_PIST_VASER |' | ' || P_NB_PIST_JUD |' | ' || P_NB_PIST_COMMI |' | ' || P_NB_PIST_SCHOL |' | ' || P_NB_PIST_WD |' | ' || P_NB_PIST_JANIB |' | ' || P_NB_PIST_JANIC |' | ' || P_NB_PIST_FIRE |' | ' || P_NB_PIST_SCHOB |' | ' || P_NB_PIST_SUPCM |' | ' || P_NB_PIST_WATBD |' | ' || P_NB_PIST_GOLEL |' | ' || P_GM_NAME |' | ' || P_ED_JANI_CODE |' | ' || P_DAT_ACCEPT |' | ' || P_DAT_CHANGED |' | ' || P_OD_COMBO |' | ' || P_TX_DESC |' | ' || P_DAT_LST_CTT |' | ' || P_BD_NUM2 |' | ' || P_BD_FRET1 |' | ' || P_BD_UNIT2 |' | ' || P_BD_GOLE2 |' | ' || P_BD_ST |' | ' || P_BD_GEP5 |' | ' || P_BD_GEP4 |' | ' || P_BD_FRET2 |' | ' || P_BD_FRET3 |' | ' || P_BD_COUNTRY);

  UTL_FILE. FFLUSH (L_FILE);

  END LOOP;

  CLOSE C1;

  END LOOP;

  CLOSE C2;

  UTL_FILE. FCLOSE (L_FILE);

  END;

  /

  Appreciate your suggestions.

  Thank you and best regards,

  REDA

  You understand, but you can't do it?  What?  Move a single line in the right place?

  * sigh * I wish I was your code monkey...

  -DECLERATION

  BEGIN

  OPEN C2;

  LOOP

  EXTRACT THE C2 IN P_WRITE;

  WHEN THE EXIT C2% NOTFOUND;

  L_NAME: = "WRITE" | P_WRITE | » _. TXT';

  L_FILE: = UTL_FILE. FOPEN (L_DIR, L_NAME, 'W');

  OPEN C1 (P_WRITE);

  LOOP

  FETCH C1 INTO P_OD_PLACE, P_OD_USER, P_ED_PERF, P_GM_LST, P_GM_FIRST, P_GM_MOD, P_GM_SUFF, P_BD_NUM, P_BD_FRET, P_BD_UNIT, P_BD_GOLE, P_BD_GEP, P_DAT_BOD, P_DAT_EFF, P_ED_RACE, P_ED_GENDER, P_LAND_DIST, P_LAND_LOT, P_ED_STAT_REASON ,P_OD_PRECINCT,P_OD_JANI_PREC,P_NB_PIST_CNG,P_NB_PIST_SEN,P_NB_PIST_VASER,P_NB_PIST_JUD,P_NB_PIST_COMMI,P_NB_PIST_SCHOL,P_NB_PIST_WD,P_NB_PIST_JANIB,P_NB_PIST_JANIC,P_NB_PIST_FIRE,P_NB_PIST_SCHOB,P_NB_PIST_SUPCM,P_NB_PIST_WATBD,P_NB_PIST_GOLEL P_GM_NAME, P_ED_JANI_CODE, P_DAT_ACCEPT, P_DAT_CHANGED, P_OD_COMBO, P_TX_DESC, P_DAT_LST_CTT, P_BD_NUM2, P_BD_FRET1, P_BD_UNIT2, P_BD_GOLE2, P_BD_ST, P_BD_GEP5, P_BD_GEP4, P_BD_FRET2, P_BD_FRET3, P_BD_COUNTRY;

  WHEN EXIT C1% NOTFOUND;

  UTL_FILE. PUT_LINE (L_FILE, P_OD_PLACE: ' |) ' || P_OD_USER |' | ' || P_ED_PERF |' | ' || P_GM_LST |' | ' || P_GM_FIRST |' | ' || P_GM_MOD |' | ' || P_GM_SUFF |' | ' || P_BD_NUM |' | ' || P_BD_FRET |' | ' || P_BD_UNIT |' | ' || P_BD_GOLE |' | ' || P_BD_GEP |' | ' || P_DAT_BOD |' | ' || P_DAT_EFF |' | ' || P_ED_RACE |' | ' || P_ED_GENDER |' | ' || P_LAND_DIST |' | ' || P_LAND_LOT |' | ' || P_ED_STAT_REASON |' | ' || P_OD_PRECINCT |' | ' || P_OD_JANI_PREC |' | ' || P_NB_PIST_CNG |' | ' || P_NB_PIST_SEN |' | ' || P_NB_PIST_VASER |' | ' || P_NB_PIST_JUD |' | ' || P_NB_PIST_COMMI |' | ' || P_NB_PIST_SCHOL |' | ' || P_NB_PIST_WD |' | ' || P_NB_PIST_JANIB |' | ' || P_NB_PIST_JANIC |' | ' || P_NB_PIST_FIRE |' | ' || P_NB_PIST_SCHOB |' | ' || P_NB_PIST_SUPCM |' | ' || P_NB_PIST_WATBD |' | ' || P_NB_PIST_GOLEL |' | ' || P_GM_NAME |' | ' || P_ED_JANI_CODE |' | ' || P_DAT_ACCEPT |' | ' || P_DAT_CHANGED |' | ' || P_OD_COMBO |' | ' || P_TX_DESC |' | ' || P_DAT_LST_CTT |' | ' || P_BD_NUM2 |' | ' || P_BD_FRET1 |' | ' || P_BD_UNIT2 |' | ' || P_BD_GOLE2 |' | ' || P_BD_ST |' | ' || P_BD_GEP5 |' | ' || P_BD_GEP4 |' | ' || P_BD_FRET2 |' | ' || P_BD_FRET3 |' | ' || P_BD_COUNTRY);

  UTL_FILE. FFLUSH (L_FILE);

  END LOOP;

  CLOSE C1;

  UTL_FILE. FCLOSE (L_FILE);

  END LOOP;

  CLOSE C2;

  END;

  /

• dmp Impdp file error: ORA-29283: operation invalid file ORA-06512: at "SYS." UTL_FILE", line 536

  Hi all.

  Sorry to ask this error again, I read a lot of topic in this forum on this subject, but I can't fix it.

  So I create this topic.

  My computer is running oracle database 11 g 2 express edition on ubuntu LTS 14.04.

  I'm trying to import the database of dmp file. That's what I do:

  
  

  > sqplus

  opening session with sys as sysdba, then run:

  Hoangnv CREATE USER IDENTIFIED BY hoangnv;

  GRANT CONNECT TO hoangnv;

  GRANT RESOURCE, s/n hoangnv;

  CREATE OR REPLACE DIRECTORY dmpdir AS ' / home/hoangnv/downloads/db ";

  GRANT read, write the DIRECTORY ON dmpdir TO hoangnv;

  
  

  my_project.dmp file is stored on /home/hoangnv/Downloads/db folder.
  

  Finally, I ran the command below in terminal:

  impdp hoangnv/hoangnv@xe directory = dmpdir dumpfile = my_project.dmp logfile = my_project.log

  
  

  That's what see the Terminal:

  ORA-39002: invalid operation

  ORA-39070: unable to open the log file.

  ORA-29283: invalid file operation

  ORA-06512: at "SYS." UTL_FILE", line 536

  ORA-29283: invalid file operation

  Any ideas? I run these commands on window and import the database successfully.

  Hello

  Please try the suggestions below:

  1. make sure that the roles granted to the user are 'default' for him.

  SQL > change the user hoangnv the role by default all;

  then try to re-import.

  Note: the DBA role contains the IMP_FULL_DATABASE with it.

  2. try import with the use of the 'System' this time, which is the result then? don't forget to give the system read, write on directory dmpdir.

  3. is the permission to/home/hoangnv/Downloads/db fine OS?

• Error: ORA-01722: invalid number

  Hello
  
  Can some please tell me what I'm doing wrong when I try to make a difference?
  
  Since the format is the same I use this query
  
  Select b1 - b2 of TMP_1;

  Error: ORA-01722: invalid number

  --create table         
      CREATE TABLE TMP_1
  (
    B1  VARCHAR2(8 BYTE),
    B2  VARCHAR2(8 BYTE)
  ) 
  /
  
  --insert 
  
  INSERT INTO TMP_1 (B1, B2)
       VALUES ('00:02:54', '00:02:10');
  
  INSERT INTO TMP_1 (B1, B2)
       VALUES ('00:05:47', '00:03:56');
  
  INSERT INTO TMP_1 (B1, B2)
       VALUES ('00:12:49', '00:02:37');
  
  INSERT INTO TMP_1 (B1, B2)
       VALUES ('00:49:33', '00:02:09');
  
  INSERT INTO TMP_1 (B1, B2)
       VALUES ('00:06:34', '00:02:39');
  
  INSERT INTO TMP_1 (B1, B2)
       VALUES ('00:02:45', '00:01:41');
  
  INSERT INTO TMP_1 (B1, B2)
       VALUES ('00:01:22', '00:00:22');
  
  COMMIT;

  objective:
  
  Need to get the difference in the same format as the

   columns example: 00:02:54 

  Please provide examples of data, it is very useful. Here's one way:

  SQL> select b1, b2,
    2         b1 - (to_date(to_char(sysdate, 'dd-mon-yyyy')||' '||b2,'dd-mon-yyyy hh24:mi:ss') - trunc(sysdate)) b3
    3  from tmp_1;
  
  B1                   B2       B3
  -------------------- -------- --------------------
  03-dec-2012 20:13:33 00:02:10 03-dec-2012 20:11:23
  03-dec-2012 18:24:24 00:03:56 03-dec-2012 18:20:28
  03-dec-2012 21:48:33 00:02:37 03-dec-2012 21:45:56
  03-dec-2012 15:50:09 00:02:09 03-dec-2012 15:48:00
  03-dec-2012 14:06:24 00:02:39 03-dec-2012 14:03:45
  03-dec-2012 21:47:15 00:01:41 03-dec-2012 21:45:34
  

  John

• sdo_util code error ORA-01722: invalid number in Oracle 11 g R2

  Dear everyone,
  Greetings.
  
  Hello. As mentioned in the title, I encountered a strange problem when I was trying to extrude 2D to 3D objects. The error code says ORA-01722: invalid number. Then, to eliminate the possibility that the code would be bad, I took the code example for the ORACLE document on sdo_util.extrude
  http://download.Oracle.com/docs/CD/E11882_01/AppDev.112/e11830/sdo_util.htm#SPATL1230
  
  the same error appeared. However, I tried the same code through the SQLDeveloper under Linux (the 11 g R2 where) to do the same thing in my database in windows server 2008 where 11 g R1 has been installed. Works very well.
  
  Y at - it a particular configuration I need to do or that I did wrong. Any knows, please help. Thank you.
  
  
  Jun

  Hi, -.
  Please use without setting for output 11.2.0.1.0 'FALSE':

  SELECT SDO_UTIL. EXTRUDE)
  SDO_GEOMETRY)
  2003,
  NULL,
  NULL,
  SDO_ELEM_INFO_ARRAY (1,1003,1),
  SDO_ORDINATE_ARRAY (5, 1,8,1,8,6,5,7,5,1));
  SDO_NUMBER_ARRAY (0,0,0,0,0),
  SDO_NUMBER_ARRAY (5,10,10,5,5),
  0.005) twice;

  In 11.1.0.7 release, you must use the parameter 'FALSE ':

  SELECT SDO_UTIL. EXTRUDE)
  SDO_GEOMETRY)
  2003,
  NULL,
  NULL,
  SDO_ELEM_INFO_ARRAY (1,1003,1),
  SDO_ORDINATE_ARRAY (5, 1,8,1,8,6,5,7,5,1));
  SDO_NUMBER_ARRAY (0,0,0,0,0),
  SDO_NUMBER_ARRAY (5,10,10,5,5),
  'FALSE. '
  0.005) twice;

  We have fixed this confusion for future releases so that the two interfaces can be used
  and the 'FALSE' parameter is ignored.

  Best regards
  Baris

• Select list LOV (error ORA-01722: invalid number)

  Hello
  I use this procedure to insert data into a table through a submit after processes.
  

  CREATE OR REPLACE
  PROCEDURE PR_INS_TMP_STUDENTS(
  v_tmp_stu_id_in     IN      NUMBER
  )
  IS
  BEGIN
  
  
    INSERT INTO TMP_STUDENTS (
        stu_id,
        stu_name_last,
           stu_name_first,
           stu_name_middle,
           stu_name_suffix,
           stu_name_prefer_last,
        stu_name_prefer_first,
        sch_id
        )
    VALUES (
        v_tmp_stu_id_out,
        V('p50100_stu_name_last'),
        V('p50100_stu_name_first'),
        V('p50100_stu_name_middle'),
        V('p50100_stu_name_suffix'),
        V('p50100_stu_name_prefer_last'),
        V('p50100_stu_name_prefer_first'),
        V('p50100_sch_id')
        );
  
  END;

  I kept getting this error during the presentation of the page.
  

  ORA-01722: invalid number
  Error      Insert Failed! 

  I go back to sch_id which is a list of number type selection (3.0). The LOV selection list has the following attributes:
  

  Display extra value: No
  Dynamic Translation: No
  Number of Columns: 1
  Display Null: Yes
  Null Display Value: blank
  Null Return Value: blank

  Here's the code for the LOV:

  SELECT distinct(site_id || ' - ' || initcap(lower(site_name))) site_desc, site_id ret_val
  FROM sa.SITE_DEMOGRAPHICS@sis
  order by 2

  I don't know why I kept ORA-01722: invalid number during the presentation of the page. Everyone ran through this issue?

  Hello

  First of all, you should also use nv ('itemname') for numeric values-, make sure you use v() instead of V() for others.

  If the p50100_sch_id can be null, the return value will be "null %" - which could be the cause of the error.

  In such cases, I tend to do something like -1 of the value zero, then do a test for that, in the code - if the value is - 1, I replace NULL

  Andy

• SQL error: ORA-31038: invalid number '420,05' when extracting data from XML

  Hello everyone ,
  
  J’ai créé dieting
  
  

  DBMS_XMLSCHEMA. REGISTERSCHEMA (SCHEMAURL = > 'OrdenDetalle.xsd', SCHEMADOC = > ' <? xml version = "1.0" encoding = "UTF?) 8 "? >

  " < xs: schema xmlns: XS =" http://www.w3.org/2001/XMLSchema ">

  < xs: element name = "Monsigniore" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "Quantity" type = "Integer" / >

  < xs: element name = "FechaCreacion" type = "xs: DateTime" / >

  < xs: element name = "Version" type = "xs: String" / >

  < xs: ELEMENT ref = "News" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < xs: element name = "News" >

  < xs: complexType >

  < xs: Choice >

  < xs: element name = "OrdenCompra" type = "T_OrdenCompra" / >

  < / xs: Choice >

  < / xs: complexType >

  < / xs: element >

  < name XS: complexType = "T_OrdenCompra" >

  < xs: SEQUENCE >

  < xs: element name = "Code" type = "xs: String" / >

  < xs: element name = "Number" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CodigoEstado" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CodigoLicitacion" type = "xs: String" nillable = "true" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Description" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CodigoTipo" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Type" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "TipoMoneda" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "State" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CodigoEstadoProveedor" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "EstadoProveedor" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: ELEMENT ref = "Fechas" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "TieneItems" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "PromedioCalificacion" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CantidadEvaluacion" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Well" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Freighters" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "TotalNeto" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "PorcentajeIva" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Impuestos" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Total" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Financing" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Country" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "TipoDespacho" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "FormaPago" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: ELEMENT ref = "Comprador" minOccurs = "0" maxOccurs = "1" / >

  < xs: ELEMENT ref = "Proveedor" minOccurs = "0" maxOccurs = "1" / >

  < xs: ELEMENT ref = "Items" minOccurs = "0" maxOccurs = "1" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < xs: element name = "Items" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "Quantity" type = "Integer" / >

  < xs: element name = "News" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: ELEMENT ref = "Item" minOccurs = "0" maxOccurs = "unbounded" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < name XS: complexType = "OrdenCompraBusqueda" >

  < xs:complexContent >

  < xs:extension base = "T_OrdenCompra" >

  < / xs:extension >

  < / xs:complexContent >

  < / xs: complexType >

  < xs: element name = "Item" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "Correlativo" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CodigoCategoria" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Category" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CodigoProducto" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Product" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "EspecificacionComprador" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "EspecificacionProveedor" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Quantity" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Moneda" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  "< xs: element name ="PrecioNeto"type ="XS: Decimal"minOccurs ="0"maxOccurs ="1"/ >

  < xs: element name = "TotalCargos" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "TotalDescuentos" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "TotalImpuestos" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Total" type = "xs: Decimal" minOccurs = "0" maxOccurs = "1" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < xs: element name = "Fechas" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "FechaCreacion" type = "xs: DateTime" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "FechaEnvio" type = xs: DateTime "" nillable = "true" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "FechaAceptacion" type = xs: DateTime "" nillable = "true" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "FechaCancelacion" type = xs: DateTime "" nillable = "true" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "FechaUltimaModificacion" type = xs: DateTime "" nillable = "true" minOccurs = "0" maxOccurs = "1" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < xs: element name = "Comprador" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "CodigoOrganismo" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "NombreOrganismo" type = "xs: String" nillable = "true" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "RutUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CodigoUnidad" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "NombreUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Activity" type = "xs: String" nillable = "true" / >

  < xs: element name = "DireccionUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "ComunaUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "RegionUnidad" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Country" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "NombreContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CargoContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "FonoContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "MailContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < xs: element name = "Proveedor" >

  < xs: complexType >

  < xs: SEQUENCE >

  < xs: element name = "Code" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Number" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Activity" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CodigoSucursal" type = "Integer" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "NombreSucursal" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "RutSucursal" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Address" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Comuna" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Region" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "Country" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "NombreContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "CargoContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "FonoContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < xs: element name = "MailContacto" type = "xs: String" minOccurs = "0" maxOccurs = "1" / >

  < / xs: SEQUENCE >

  < / xs: complexType >

  < / xs: element >

  < / xs: Schema >

  ', LOCAL = > true, GENTYPES = > false, GENBEAN = > false, GENTABLES = > false,

  FORCE = > false, OPTIONS = > DBMS_XMLSCHEMA. REGISTER_BINARYXML, OWNER = > USER);

  I have a table with one xml domain.
  
  

  CREATE TABLE XML_Orden_Detalle (Fecha_GET date default current_date not null,

  Fecha_Ordenes number not null,

  Correlativo_Ordenes number not null,

  Codigo_Orden varchar2 (20) not not null primary key,

  Cant_Item,

  Date of InicioProceso,

  Date of FinProceso,

  Xmltype Orden_Detalle not null)

  Orden_Detalle XMLTYPE COLUMN

  STORE AS BINARY XML

  XMLSCHEMA " " http://xmlns.Oracle.com/xdb/schemas/CCS_XML/OrdenDetalle.xsd "" "

  ELEMENT "command";

  
  I inserted data like that, without any Errors:
  
  

  " < Command containing = ' http://www.w3.org/2001/XMLSchema "" xmlns: xsi = " " http://www.w3.org/2001/XMLSchema-instance ">

  < Number > 1 < / quantity >

  < FechaCreacion > 2015-05-28T 12: 10:26.947000 < / FechaCreacion >

  v1 < version > < / Version >

  < Return >

  < OrdenCompra xsi: type = "OrdenCompraBusqueda" >

  3879-2661-SE14 < code > < / code >

  < Number > PSP DAEM 2014.  COFFEE BREAK PARA FRINGE OP21838 < / number >

  < CodigoEstado > 6 < / CodigoEstado >

  3902 5-on 14 < CodigoLicitacion > < / CodigoLicitacion >

  < Description > PSP DAEM 2014.  COFFEE BREAK PARA FRINGE OP21838 < / description >

  < CodigoTipo > 8 < / CodigoTipo >

  < Type > SE < / Type >

  < TipoMoneda > CLP < / TipoMoneda >

  Is < State > < / Estado >

  < CodigoEstadoProveedor > 4 < / CodigoEstadoProveedor >

  Is < EstadoProveedor > < / EstadoProveedor >

  < Fechas >

  < FechaCreacion > 2014-12-29T 17: 43:32.287000 < / FechaCreacion >

  < FechaEnvio > 2014-12-31T 10: 32:35.480000 < / FechaEnvio >

  < FechaAceptacion > 2015 - 01-01 T 21: 03:03.660000 < / FechaAceptacion >

  < FechaCancelacion xsi: Nil = "true" / >

  < FechaUltimaModificacion > 2014-12-29T 17: 51:00.000000 < / FechaUltimaModificacion >

  < / Fechas >

  < TieneItems > 1 < / TieneItems >

  < PromedioCalificacion > 5 < / PromedioCalificacion >

  < CantidadEvaluacion > 1 < / CantidadEvaluacion >

  < Well > 0 < / well >

  cargo <>0 < / cargo >

  < TotalNeto > 53782 < / TotalNeto >

  < PorcentajeIva > 19 < / PorcentajeIva >

  < Impuestos > 10218 < / Impuestos >

  < total > 64000 < / Total >

  < Financing > 1140569 < / financing >

  < Country > CL < / Pais >

  < TipoDespacho > 12 < / TipoDespacho >

  < FormaPago > 2 < / FormaPago >

  < comprador >

  < CodigoOrganismo > 118069 < / CodigoOrganismo >

  < NombreOrganismo > Ilustre municipalidad of Bulnes < / NombreOrganismo >

  < RutUnidad > 69.141.200 - 8 < / RutUnidad >

  < CodigoUnidad > 4799 < / CodigoUnidad >

  Daem < NombreUnidad > < / NombreUnidad >

  < Actividad / >

  < DireccionUnidad > VICTOR BIANCHI Nº415 < / DireccionUnidad >

  Bulnes < ComunaUnidad > < / ComunaUnidad >

  < RegionUnidad > Region del Biobio < / RegionUnidad >

  < Country > CL < / Pais >

  Antonella Brunetti < NombreContacto > < / NombreContacto >

  Adquisiciones < CargoContacto > < / CargoContacto >

  < FonoContacto > 56-42-2204053-2204054 < / FonoContacto >

  < MailContacto > [email protected] < / MailContacto >

  < / comprador >

  < Proveedor >

  < Code > 275020 < / code >

  Luis < number > < / number >

  < Activity > MANUFACTURING OF PAN, BLOCK PANADERIA Y PRODUCTOS < / activity >

  < CodigoSucursal > 280820 < / CodigoSucursal >

  Luis < NombreSucursal > < / NombreSucursal >

  < RutSucursal > 5.940.940 - 9 < / RutSucursal >

  < Address > Carlos Palacios 125 < / address >

  Bulnes < Comuna > < / Comuna >

  Region del Biobio < region > < / region >

  < Country > CL < / Pais >

  < NombreContacto > Luis Leonardo Valdés Landero < / NombreContacto >

  Gerente < CargoContacto > < / CargoContacto >

  < FonoContacto > (56) (42) 631498 < /FonoContacto >

  < MailContacto > [email protected] < / MailContacto >

  < / Proveedor >

  elements <>

  < Quantity > 7 < / quantity >

  < Return >

  < item >

  < Correlativo > 1 < / Correlativo >

  < CodigoCategoria > 30222700 < / CodigoCategoria >

  < Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >

  < CodigoProducto > 30222703 < / CodigoProducto >

  < product > ALMACEN Mercancias < / product >

  < EspecificacionComprador > 3 LITROS BEBIDAS < / EspecificacionComprador >

  < EspecificacionProveedor / >

  < Number > 10 < / quantity >

  < Moneda > CLP < / Moneda >

  < PrecioNeto > 1550 < / PrecioNeto >

  < TotalCargos > 0 < / TotalCargos >

  < TotalDescuentos > 0 < / TotalDescuentos >

  < TotalImpuestos > 0 < / TotalImpuestos >

  < total > 15500 < / Total >

  < / point >

  < item >

  < Correlativo > 2 < / Correlativo >

  < CodigoCategoria > 30222700 < / CodigoCategoria >

  < Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >

  < CodigoProducto > 30222703 < / CodigoProducto >

  < product > ALMACEN Mercancias < / product >

  < EspecificacionComprador > DEEMED OF 1 1/2 LITYROS < / EspecificacionComprador >

  < EspecificacionProveedor / >

  < Number > 10 < / quantity >

  < Moneda > CLP < / Moneda >

  < PrecioNeto > 1150 < / PrecioNeto >

  < TotalCargos > 0 < / TotalCargos >

  < TotalDescuentos > 0 < / TotalDescuentos >

  < TotalImpuestos > 0 < / TotalImpuestos >

  < total > 11500 < / Total >

  < / point >

  < item >

  < Correlativo > 3 < / Correlativo >

  < CodigoCategoria > 30222700 < / CodigoCategoria >

  < Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >

  < CodigoProducto > 30222703 < / CodigoProducto >

  < product > ALMACEN Mercancias < / product >

  < EspecificacionComprador > PACKAGES SERVILLETAS < / EspecificacionComprador >

  < EspecificacionProveedor / >

  < Number > 8 < / quantity >

  < Moneda > CLP < / Moneda >

  < PrecioNeto > 170 < / PrecioNeto >

  < TotalCargos > 0 < / TotalCargos >

  < TotalDescuentos > 0 < / TotalDescuentos >

  < TotalImpuestos > 0 < / TotalImpuestos >

  < total > 1360 < / Total >

  < / point >

  < item >

  < Correlativo > 4 < / Correlativo >

  < CodigoCategoria > 30222700 < / CodigoCategoria >

  < Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >

  < CodigoProducto > 30222703 < / CodigoProducto >

  < product > ALMACEN Mercancias < / product >

  < EspecificacionComprador > pounds OF AZÚCAR < / EspecificacionComprador >

  < EspecificacionProveedor / >

  < Number > 5 < / quantity >

  < Moneda > CLP < / Moneda >

  < PrecioNeto > 580 < / PrecioNeto >

  < TotalCargos > 0 < / TotalCargos >

  < TotalDescuentos > 0 < / TotalDescuentos >

  < TotalImpuestos > 0 < / TotalImpuestos >

  < total > 2900 < / Total >

  < / point >

  < item >

  < Correlativo > 5 < / Correlativo >

  < CodigoCategoria > 30222700 < / CodigoCategoria >

  < Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >

  < CodigoProducto > 30222703 < / CodigoProducto >

  < product > ALMACEN Mercancias < / product >

  < EspecificacionComprador > NESCAFE < / EspecificacionComprador >

  < EspecificacionProveedor / >

  < Number > 2 < / quantity >

  < Moneda > CLP < / Moneda >

  < PrecioNeto > 3900 < / PrecioNeto >

  < TotalCargos > 0 < / TotalCargos >

  < TotalDescuentos > 0 < / TotalDescuentos >

  < TotalImpuestos > 0 < / TotalImpuestos >

  < total > 7800 < / Total >

  < / point >

  < item >

  < Correlativo > 6 < / Correlativo >

  < CodigoCategoria > 30222700 < / CodigoCategoria >

  < Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >

  < CodigoProducto > 30222703 < / CodigoProducto >

  < product > ALMACEN Mercancias < / product >

  < EspecificacionComprador > CAJAS OF TE 20 BOWL < / EspecificacionComprador >

  < EspecificacionProveedor / >

  < Number > 5 < / quantity >

  < Moneda > CLP < / Moneda >

  < PrecioNeto > 340 < / PrecioNeto >

  < TotalCargos > 0 < / TotalCargos >

  < TotalDescuentos > 0 < / TotalDescuentos >

  < TotalImpuestos > 0 < / TotalImpuestos >

  < total > 1700 < / Total >

  < / point >

  < item >

  < Correlativo > 7 < / Correlativo >

  < CodigoCategoria > 30222700 < / CodigoCategoria >

  < Category > items para estructuras, obras y construcciones / permanent Construcciones / industriales Construcciones < / categories >

  < CodigoProducto > 30222703 < / CodigoProducto >

  < product > ALMACEN Mercancias < / product >

  TRITON GALLETAS < EspecificacionComprador > < / EspecificacionComprador >

  < EspecificacionProveedor / >

  < Number > 31 < / quantity >

  < Moneda > CLP < / Moneda >

  < PrecioNeto >420,05< / PrecioNeto >

  < TotalCargos > 0 < / TotalCargos >

  < TotalDescuentos > 0 < / TotalDescuentos >

  < TotalImpuestos > 0 < / TotalImpuestos >

  < total > 13021,550000000001 < / Total >

  < / point >

  < / News >

  < / object >

  < / OrdenCompra >

  < / News >

  < / Monsigniore >

  However when I extract data, for example:

  
  

  Select *.

  from xmltable (to_char (' / Monsigniore/news/OrdenCompra/Items/News/Item[1] ''))

  passage (select Orden_Detalle

  of xml_Orden_Detalle

  where Fecha_Ordenes = 20150101 and Correlativo_ordenes = 83)

  path of columns Correlativo varchar2 (15) 'Correlativo '.

  , Path of varchar2 (15) CodigoCategoria 'CodigoCategoria '.

  , Path Categoria Varchar2 (100 CHAR) "category.

  , Path of varchar2 (15) CodigoProducto 'CodigoProducto '.

  , Path of Producto Varchar2 (100 CHAR) 'product '.

  , Path of the EspecificacionComprador Varchar2 (100 CHAR) "EspecificacionComprador".

  , Path of the EspecificacionProveedor Varchar2 (100 CHAR) "EspecificacionProveedor".

  , Amount varchar2 (15) path 'amount '.

  , Path of the Moneda Varchar2 (16 CHAR) "Moneda".

  , Path of varchar2 (15) PrecioNeto 'PrecioNeto '.

  , Path of varchar2 (15) TotalCargos 'TotalCargos '.

  , Path of varchar2 (15) TotalDescuentos 'TotalDescuentos '.

  , Path of varchar2 (15) TotalImpuestos 'TotalImpuestos '.

  , Path of varchar2 (15) total 'Total '.

  );

  
  

  delivery the following error:

  
  

  Informed of error:

  SQL error: ORA-31038: Valor number no valido: "420,05."

  «31038 00000 - "value not valid %s: \"%s\»»

  * Cause: The text in the XML document does not represent a valid

  value given the data type and other constraints in the schema.

  * Action: Make sure the value specified in the XML documents is valid

  regarding the data type and other constraints in the schema.

  Note that extract le agenda [1] but the reported error is à la point [7]

  Please If anyone can Help me with le solution for no report error
  
  Thank you very much in advance
  
  
  Carlos
  

  in Chile, the decimal point are ', 'no'.', the xml data table is OK for us

  You do not understand.

  Regardless of the locale, numeric values limited by a type of data XS: Decimal must use a point in a correct XML representation, otherwise, the document is not valid by the XSD.

  (3) TO_CHAR (...) the code is part of a procedure

  Again, do NOT build a dynamic path like that.

  Why not just move through the records returned by the query (if you need close at all)?
  

  
  

  FOR rec in)

  SELECT x.*

  From your_table t

  XMLTABLE (...) x

  )

  LOOP

  END LOOP;

  
  

  What is the role of the v_CantItems variable? Paging?

  Whence its value?
  

• The AUDIT command in, oracle apex (version 4.2.5.00.08), error "ORA-00911: invalid character '.

  I am trying to run

  "AUDIT INSERT, UPDATE, DELETE on emp BY ACCESS WHENEVER SUCCESSFUL;"

  in "SQL commands" on oracle-apex (version 4.2.5.00.08).

  I get the error message ' ORA-00911: invalid character '.

  Can someone tell me the solution for this?

  Apex environment we need to set the database AUDIT_TRAIL to TRUE for the control

  "AUDIT INSERT, UPDATE, DELETE on emp BY ACCESS WHENEVER SUCCESSFUL;"  to work.

  By their Summit, to be able to change the setting of database AUDIT_TRAIL we have to log-in as a DBA from the link "SQL workshop--> utilities--> on the database.

• has received the error ORA-44416: invalid ACL, while trying to enable network services

  Hi guys I got the ERROR ORA-44416 after the activation of services network in 11 GR 2 to send emails, so I ran this command found just as shown below in the Oracle document library

  SELECT THE ACL, PRINCIPAL

  OF NACL, XDS_ACE ACE DBA_NETWORK_ACLS

  WHERE HOST = ' *' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL AND

  NACL. ACLID = ACE. ACLID AND

  ARE NOT (SELECT NULL FROM ALL_USERS WHERE USERNAME = MAIN);

  That returned a result of

  no selected line

  What could this mean

  The installation is done on a localhost and the APEX version is 4.2.2 browser is mozilla fire fox

  ORA-44416 means that the ACL that you tried to create to refer to a valid principle - that is, the user does not exist.

  The SQL code that you included above seems to be looking for associated ACL principles which are more database users. I don't see a direct link between this request and the ORA-44416.

  What was your original script of ACL?

  Also, because it is a question of database rather APEX you might get a better answer on the forums of the database.

• ORACLE auxiliary database error: ORA-01152: 2 file was not restored en

  Hello
  
  I'm trying to clone a database. It is in log mode archive.
  I took a complete using below command
  

  run {
    backup
       tag 'DAILY_WHOLE'
       format 'FULL_backup_%s_%p_%c.bkp'     database
       plus archivelog
       tag 'DAILY_WHOLE'
       delete all input;
    backup
       current controlfile
       format 'FULL_backup_%s_%p_%c.bkp'     tag 'WHOLE'
       spfile
       format 'FULL_backup_%s_%p_%c.bkp'     tag 'WHOLE';
  }

  then I run a duplicate database command
  

  RUN
  {                         
   DUPLICATE DATABASE TO TEST_DB
            NOFILENAMECHECK
              NOREDO
             BACKUP LOCATION '/disk10/flash_recovery_area/PROD';
   }

  in the end, I got this error.
  

  contents of Memory Script:
  {
     Alter clone database open resetlogs;
  }
  executing Memory Script
  
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 05/15/2013 11:59:21
  RMAN-05501: aborting duplication of target database
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06136: ORACLE error from auxiliary database: ORA-01152: file 2 was not restored from a sufficiently old backup
  ORA-01110: data file 2: 'sysaux.dbf'

  Can someone help me? I'd be happy. Thank you

  NOREDO would be used when you have a consistent backup (i.e. backup performed while the database is mounted, but is not OPEN) and so any archivelogs must be applied. (It would also be the case for a NOARCHIVELOG database).

  See the notes on NOREDO in order to DUPLICATE documentation in the backup and recovery of reference.

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724

  Hemant K Collette

• Reconciliation error: ORA-00903: invalid table name

  I am facing this error below:
  
  SELECT * FROM WHERE ORC_KEY =? AND UD_RES_P_KEY =? : java.sql.SQLSyntaxErrorException: ORA-00903: invalid table name
  
  What is a product of IOM 9.1.0.2 problem?
  
  Best regards
  Robert

  No, it isn't a matter of product. Please go to the tab of process definition and
  define any attribute with multiple values as a key field in mapping definition of the reconciliation process.

  Let me know the result, if you please.

  hope this helps,
  Thiago Guimarães L

• Why this error ORA-01747: invalid user.table.column, table.column or colu

  Hello
  
  Run immediately is to give different results

  SQL>  declare
    2   v varchar2(30):='SAL';
    3   Begin
    4   execute immediate 'update emp set :1=1000 where empno=7900' using v;
    5   end;
    6   /
   declare
  *
  ERROR at line 1:
  ORA-01747: invalid user.table.column, table.column, or column specification
  ORA-06512: at line 4

  But,
  

  SQL> declare
    2  v varchar2(30):='SAL';
    3  Begin
    4  execute immediate 'update emp set ' ||v||'=1000 where empno=7900';
    5  end;
    6  /
  old 7900 new 7900
  
  PL/SQL procedure successfully completed.

  Can someone kindly explain to me the reason.
  
  I need to accomplish a task using the first way.
  
  What could be the solution to the above ORA error?
  
  Thank you

  Column names cannot be used as a bind variable.
  If you do not need to do this using method 1 as method 1 does not work by design.
  On the other hand, you need replace the literal (7500,7900) with a variable binding.

  --------
  Sybrand Bakker
  Senior Oracle DBA

• HELP-immediate execution in PL/SQL has received the error ORA-00904: invalid identifier

  What is the problem with the following codes from PL/SQL (actually it comes to Oracle Metalink Note: 313175.1):
  ===========
  declare
  cursor c1 is select * from $ semantic;
  v_statement VARCHAR2 (255);
  v_nc number (10);
  v_nt number (10);
  Start
  immediate execution
  "select count (*) from $ semantics" in v_nc;
  immediate execution
  ' select count (distinct s_table_name) of semantics$ "in v_nt;
  dbms_output.put_line
  ('Edit' | v_nc |) 'columns ' | v_nt | "tables");
  to r1 c1 loop
  v_statement: = 'ALTER TABLE ' | R1.s_owner | '.' || R1.s_table_name;
  v_statement: = v_statement | «change (' |)» R1.s_column_name | ' ';
  v_statement: = v_statement | R1.s_data_type | ' (' | r1.s_char_length;)
  v_statement: = v_statement | ' CHAR))';
  immediately run v_statement;
  end loop;
  dbms_output.put_line ('Done');
  end;
  /
  =====
  Executed once the codes as sysdba against 10gr 2 database, I got this error:
  From build to select columns to change
  Editing columns 4428 35249
  declare
  *
  ERROR on line 1:
  ORA-00904: invalid identifier
  ORA-06512: at line 22
  
  I see nothing wrong with the line of "immediate execution". I appreciate your help!
  
  Thank you.

  Hello
  Try to print the offending instruction using exception, I used small test cases by changing the pl/sql block, you may need to change to respond to all other types of data in this table.

  CREATE TABLE semantics$
  AS
     SELECT USER AS owner,
            table_name,
            data_type AS s_data_type,
            column_name,
            data_length AS s_char_length
     FROM cols
     WHERE table_name = 'MY_OBJECTS';
  
  DECLARE
     CURSOR c1
     IS
        SELECT *
        FROM semantics$;
  
     v_statement   VARCHAR2 (255);
     v_nc          NUMBER (10);
     v_nt          NUMBER (10);
  BEGIN
     EXECUTE IMMEDIATE 'select count(*) from semantics$' INTO v_nc;
  
     EXECUTE IMMEDIATE 'select count(distinct table_name) from semantics$'
        INTO v_nt;
  
     DBMS_OUTPUT.put_line(   'ALTERing '
                          || v_nc
                          || ' columns in '
                          || v_nt
                          || ' tables');
  
     FOR r1 IN c1
     LOOP
        v_statement   := 'ALTER TABLE ' || r1.owner || '.' || r1.table_name;
        v_statement   := v_statement || ' modify (' || r1.column_name || ' ';
        v_statement   :=
           v_statement || r1.s_data_type || '(' || r1.s_char_length;
  
        IF (r1.s_data_type = 'NUMBER')
        THEN
           v_statement   := v_statement || '))';
        ELSE
           v_statement   := v_statement || ' CHAR))';
        END IF;
  
        DBMS_OUTPUT.put_line (v_statement);
  
        -- EXECUTE IMMEDIATE v_statement;
     END LOOP;
  
     DBMS_OUTPUT.put_line ('Done');
  EXCEPTION
     WHEN OTHERS
     THEN
        DBMS_OUTPUT.put_line ('Statement = ' || v_statement);
        DBMS_OUTPUT.put_line (SUBSTR (SQLERRM, 1, 200));
        RAISE;
  END;
  

  _ Output

  ALTERing 13 columns in 1 tables
  ALTER TABLE MY_OBJECTS modify (OWNER VARCHAR2(30 CHAR))
  ALTER TABLE MY_OBJECTS modify (OBJECT_NAME VARCHAR2(30 CHAR))
  ALTER TABLE MY_OBJECTS modify (SUBOBJECT_NAME VARCHAR2(30 CHAR))
  ALTER TABLE MY_OBJECTS modify (OBJECT_ID NUMBER(22))
  ALTER TABLE MY_OBJECTS modify (DATA_OBJECT_ID NUMBER(22))
  ALTER TABLE MY_OBJECTS modify (OBJECT_TYPE VARCHAR2(19 CHAR))
  ALTER TABLE MY_OBJECTS modify (CREATED DATE(7 CHAR))
  ALTER TABLE MY_OBJECTS modify (LAST_DDL_TIME DATE(7 CHAR))
  ALTER TABLE MY_OBJECTS modify (TIMESTAMP VARCHAR2(19 CHAR))
  ALTER TABLE MY_OBJECTS modify (STATUS VARCHAR2(7 CHAR))
  ALTER TABLE MY_OBJECTS modify (TEMPORARY VARCHAR2(1 CHAR))
  ALTER TABLE MY_OBJECTS modify (GENERATED VARCHAR2(1 CHAR))
  ALTER TABLE MY_OBJECTS modify (SECONDARY VARCHAR2(1 CHAR))
  Done
  

  Concerning

  Published by: OrionNet on January 5, 2009 23:53

  Published by: OrionNet on January 5, 2009 23:55