Error Ox8078002A when trying to back up data on an external hard drive

Similar Questions

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

• How can I prevent Windows Update to write data to my external HARD drive

  I have Windows XP running on a controller NI PXI-8106. On this same controller, I have two mapped drives.
  1 C drive where Windows is installed
  2-external SATA drive mounted in RAID0 used to save sensitive data in our application.

  We discovered that Windows update has written files to disk external DRIVE instead of the local drive as we would expected. What could I do to prevent this. It is very important for us, given that the RAID0 data should not be upset by any means. We cannot update Windows to write outside of the C: drive.

  I look on various forums and it seems that I'm not the only one in this situation where Windows Update writes data to an external HARD drive, but I have not seen anywhere a solution to avoid this, in addition to unmaping the drive.

  During the installation of updates, Windows Update downloads the installers (only) for updates to the drive with free space available. You can either disconnect the external drive when you need and/or free up space on, for example, your boot drive.

  See http://support.microsoft.com/kb/956324 or this discussion: http://aumha.net/viewtopic.php?f=62&t=33827

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if the make

  Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if do leave LR or my car, I get the message; "Disc burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone can find out if there is something I can do. Or could it be that my computer just can't handle it? Help! So frustrating!  I have a Lenovo PC, I don't know if that makes a difference. Any ideas? Thanks a lot for your help!

  You burned discs with other programs using this computer? Are you sure that you have a drive that will burn the disks?

• I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I SAVE ALL MY DATA TO AN EXTERNAL HARD DRIVE MDL WD16001032 AND LOOKS LIKE THIS INS DEVICE IS NOT COMPATIBLE WITH WINDOWS 7... WHAT CAN I DO?

  I don't understand. What makes you think the reader 'is not compatible' with Windows 7? Windows (or any other OS besides) sees no external hard drives as "compatible" or not...

  Now if you have a PROPRIETARY disk, then that is a different case. If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Error - 36 trying to copy iTunes and iPhoto on external hard drive?

  So today, I tried to back up my iTunes and iPhoto libraries on an external hard drive before upgrading my OS, but I am getting error-36 for several files in iTunes and iPhoto. How can I fix it so I can save them? (on my drive hard, the permissions are checked and the hard drive is formatted as Mac OS extended (journaled))

  Finder - How to quickly fix the error Code-36 in the Finder of Mac OS X

  Finder - Mac error Code 36 during file transfer

  Finder - What to do about error-36 and other errors of i/o in OS X

• My new Kindle Fire HD when connected to USB causes files on my external HARD drive to go away, they come back when the Kindle is disconnected and after a reboot, any help please

  If after installation with kindle, connected external HARD drive disappears

  USB ports are usually "matched" in groups, called hubs root.  These root hubs then control and distribute the power to the USB ports.  If any device on one of the two ports, the hub root, requires too much power, the other port loses power.  When a port USB Hub root loses power, the devices connected to the port 'disappears' of the Windows session.  Normally, after you disconnect the devices from the USB port and reconnect them "must" bring these.

  A free USB powered hub can help.  These allow usually additional power over USB ports, on its own USB ports.

• transfer data to the external hard drive to the new computer laptop

  How can I recover the external hard drive LaCie saved information from old computer XP & download on new viao Windows 7? my old computer crashed so I have no way to run the the windows on my old computer program transfer.

  "remerkg" wrote in message News: * e-mail address is removed from the privacy * .com...

  How can I recover the external hard drive LaCie saved information from old computer XP & download on new viao Windows 7? my old computer crashed so I have no way to run the the windows on my old computer program transfer.

  Start Windows Explorer and locate the data that you want to transfer, select it and press on and hold down the CTRL key while tapping the c. key on the new hard drive and locate where you want to place the data and press Ctrl + V to paste the data.
   
  It won't work for data, it won't copy programs or settings of the program as they must be made using the Setup routine.

• Trying to move a large file on external hard drive

  I have a 119gig .bkf file on my desktop and I am trying to move to a new disk 320gig external hard. I get a message that there is not enough space on the disk. If I reformat the external hard drive from FAT to NTFS it work or do I start the backup utility and save it to the external hard drive? On my desk .bkf file took almost 8 hours to create. Don't want to do it again if I don't have to. Any suggestions would be much appreciated. Thanks for your time!

  You guessed correctly the problem. FAT32 is a 4 GB file size limitation. You need to format the drive NTFS. MS - MVP - Elephant Boy computers - don't panic!

• I get the error message 0 x 80070002 when using Vista for backing up my data on an external hard drive.

  Original title: My Vista system will not back up my data to an external drive. I get the error message 0 x 80070002. I obviously don't want to lose any data on my hard drive. What can I do?

  I'm running Windows 9 and I'm trying to save on a Western Digital 1 .5TB external drive.in Vista

  Hello

  There is no windows 9 Microsoft

  There is IE9

  Read this vista information

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Loss of data from the external hard drive Verbatim

  Original title : Verbatim Back Up unit

  Somehow, I had saved my original Windows XP files and photos on my Verbatim block that sits on top of my desktop Tower.  Connects to the computer with the USB cable and is on port G.  For the sake of unnown, when I check it tonight for some old pictures, all been wiped clean slate.

  Hello

  Do you remember any changes made to your computer?

  Follow the steps mentioned below and check if that helps.

  Step 1:

  Check if the files are hidden .

  Step 2:

  You can also try to connect this external hard disk on another computer and check.
  
  Step 3:

  If none of the steps to help, you may need to get a third party software using your search engine that would recover your lost data.

  WARNING OF THIRD PARTY
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I am trying to backup my drivers on my external hard drive and I don't know how to do it and I've lost my windows disc that came with the computer

  I need to know how to save my drivers on my hard drive or on a disc because I lost the disc to my computer and I want to change my hard drive on my laptop

  You back up your operating system, not your drivers.

  If you have Vista Business or Ultimate:

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Explore the features: Windows backup center and restoration

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  How to use the Vista computer backup and restore

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  When you buy a NEW hard drive, the new hard drive manufacturer is normally cloning software available on their website for you to download and do exactly what you want to do.

  Alternatively, use 3rd Party software, you will have to pay for:

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  Or get a drive for recovery of your computer manufacturer, or borrow a DVD of Vista from Microsoft and reinstall Vista,

  Read the info below:
  

  How to get Vista recovery Media.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• In Windows 7 when you try to copy files to an external hard drive, getting the error "are you sure you want to copy this file without its properties?

  I know there have been a few posts on this in the past, but I have a slightly different query.

  To copy files from my drive NTFS of Windows 7 64 bit for my Western Digital My Book World Edition II 2 GB player manually, not with the WD software provided), for some files, the following message appears.
  "Are you sure you want to copy this file without its properties?  The X file has properties that cannot be copied to the new location. »
  After investigation, it appears that Western Digital My Book World Edition II is not NTFS format and is, in fact, driven Linux.
  Their technical support has confirmed that, despite the message, it is safe to copy files and rely on this backup (I want to backup my drive HARD whole so I can do a clean install - so it's really important!).
  Is anyone able to advise exactly what means the message in terms of properties lost?

  If you right-click on one of the files in Windows Explorer, then select Properties, you will see the Details tab of the properties he wouldn't if the files have been copied to a drive not NTFS. They are written in an Alternate Data Stream (ADS), and the FAT format readers include ADS.

  It depends on the file type of the importance of these properties. If you have spent a lot of time, adding titles and comments and authors and authors e-mail addresses to docprops your Word documents, for example, that the work would be lost.

  If you can live with the loss of these properties, go ahead - standard properties will be re-writings in the file when you restore from backup. It's of course time and resources.

  To avoid this problem, format your external drive to use the NTFS system.

  Noel

• The request is not taken in charge (0 x 80070032) while trying to make a backup on an external hard drive

  Original title: the request is not supported (0 x 80070032)

  This is the answer I get trying to external and hard disk backup.

  • I have all of the products norton... I use ms essentials
  • My hd is big enough for this make upward
  • I use power power ac

  Hello
   
  Remember to make changes to your computer before the problem?
   
  Follow these steps and check if the problem persists.
   
  Step 1:
   
  You can check if the backup and restore services are started when you try to make a back up of files.
   
  a. click on start
  b. in the start search box, type Services
  c. click right on - RUN as ADMINISTRATOR

  These are the services that must be running when you try to make a return to the top.

  Automatic started Windows event log
  Task Scheduler started auto
  Backup Windows stopped manual
   
  Step 2:
   
  You may want to consider temporarily disabling your security software and then try to save.
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 3:

  I would also say that you check your disk for errors.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  WARNING:
  Important: All performing hard disk the disk check if bad sectors are found on the disk hard disk check is trying to repair this area if all available on which data may be lost

  Let us know.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Change formatting without erasing the data on an external hard drive

  My post HD format is Mac OS extended (case-sensitive, journaled); It was by default when I used it all first.

  But now I want to make changes for Mac OS extended (journaled), as I assume that I will not need to enter the password for authentication whenever I have copy the files thereon.

  Is there a way I could format my HD Ext. without erasing the files that are already in HD? Because it would be very awkward to copy the folder back.

  Thank you very much in advance!

  X

  Sorry but no... you must reformat the hard disk, which will erase the content.

  "Case-sensitive" should not be originally to enter your password. "Case-sensitive" is rarely necessary.