Error provider planning

Similar Questions

• Get the GPS location API error - provider is not available

  Hello

  I am trying to access the information of location using Android location API (via LocationManager.GPS_PROVIDER), but without success. I get error "provider not available."

  AndroidManifest.xml has lines related to the relevant permissions:

  
  

  But I do not get prompt the same security to grant these permissions to my request.

  OS version 2.0.0.3894

  Build 73070

  Thank you.

  I solved this problem by restarting and place the device near a window.

  What I was wondering now is why Android player never asked security permission to access the location of the GPS. What is a function of development?

• Explain the error of Plan

  How can I set the question below

  explain plan  for
  select * from t;
  
  select * from table(dbms_xplan.display_cursor());
  
  SQL_ID  8kfd4vsgdvxuh, child number 0
                                      
  declare     l_line varchar2(32767);     l_done number;     l_buffer
  varchar2(32767) := '';     l_lengthbuffer number := 0;     l_lengthline
  number := 0; begin   loop    dbms_output.get_line( l_line, l_done );   
  if (l_buffer is null) then      l_lengthbuffer := 0;    else     
  l_lengthbuffer := length(l_buffer);    end if;    if (l_line is null)
  then      l_lengthline := 0;    else      l_lengthline :=
  length(l_line);    end if;   exit when l_lengthbuffer + l_lengthline >
  :maxbytes OR l_lengthbuffer + l_lengthline > 32767 OR l_done = 1;  
  l_buffer := l_buffer || l_line || chr(10);      end loop;      :done :=
  l_done;      :buffer := l_buffer;      :line := l_line;  end;
  
  NOTE: cannot fetch plan for SQL_ID: 8kfd4vsgdvxuh, CHILD_NUMBER: 0
        Please verify value of SQL_ID and CHILD_NUMBER;
        It could also be that the plan is no longer in cursor cache (check v$sql_plan)
  
  
  

  Just use:

  Select * from table (dbms_xplan.display);

  Now about the error. This means SQL_ID 8kfd4vsgdvxuh (historically) has several plans. Initially, he was a child 0 but environment optimizer then changed (for example, statistics were collected, index has been created/deleted, etc.) and child 0 to summer invalidated and child 1 has been created (and this process can be repeated). When you run:

  Select * from table (dbms_xplan.display_cursor ());

  child by default is 0 - that's why it fails. Question:

  Select child_number in the gv$ sql_plan where sql_id = "8kfd4vsgdvxuh";

  or

  Select child_number in the gv$ sql_shared_cursor where sql_id = "8kfd4vsgdvxuh";

  and use:

  Select * from table (dbms_xplan.display_cursor ('8kfd4vsgdvxuh', child-number));

  SY.

• ERROR URL planning

  The Oracle EPM System Diagnostics

  PAST

  HTTP: HTTP

  Check availability of HTTP context http://Win-5SRHHS52LM1:19000 / HyperionPlanning /

  0 seconds

  http://win-5srhhs52lm1:19000/HyperionPlanning/index.jsp

  Error

  Error 404 - not found

  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:

  10.4.5 404 not found

  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

  Please notify

  You can access planning directly, for example http://win-5srhhs52lm1:8300HyperionPlanning / index.jsp

  or if planning was deployed on a single managed server http://win-5srhhs52lm1:9000/HyperionPlanning/index.jsp

  If you can't access it then try to restart the services or check the logs (please don't ask where they are once again)

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Error: Provider GL is closed during the operation of staggering accrual

  Hi all
  
  I am trying to create a number of expenses of the class 'Transaction' and ' reverse expenditures in a period Future "flag set.
  When I release the batch processing system is giving error "period of provider GL for the stunning Accounting Transaction is closed.
  
  Please help solve the problem.
  
  Kind regards
  Sanjay

  Hello

  If you enter expenses for October, check that October and November are open.

  Dina

• When you use a set of accounts, get error "provider was not found.

  I use Windows 7-64 bit.

  I had been using a set of accounts a month ago, when I started having 'provider cannot be found. It cannot be installed correctly. The package is in program files (x 86) then I guess that it is 32-bit.

  Their support team said I need "Microsoft Data Access / JET of objects ' but I don't understand how these things can have deserted.

  I think that the Jet is part of windows 7 and so I don't think that I can download.

  I ran the System File Checker and who found a hash with msjint40.dll problem but it could not fix it. He says that the source file in the store is also corrupt.

  What is going on? Msjint40.dll (winxsx/Syswow64) files do not look as if they have changed recently - 14/07/2009.

  The problem of hash can cause a provider not found message?

  What happened and, more specifically, how do I do?

  2012-10-05 16:52:42, CSI 0000029f hashes for Member file Info? \C:\Windows\SysWOW64\msjint40.dll are not real file [l:24 {12}] "msjint40.dll": "

  Found: {l:32 b:4co68RsJJzz / 05RpZb1lX48bQFAlpOhNYOhLRTD0T2o =} expected: {l:32 b:hz / peGdAuJRqXXf8RXlIEtc + 8CQBNBHngjeC5skUVWc =}

  2012-10-05 16:52:42, CSI Info a 000002-0 hashes of file members \SystemRoot\WinSxS\x86_microsoft-windows-m... mponents-jetintlerr_31bf3856ad364e35_6.1.7600.16385_none_0f472a3521bdcfd4\msjint40.dll is not actual file [l:24 {12}] "msjint40.dll": "

  Found: {l:32 b:4co68RsJJzz / 05RpZb1lX48bQFAlpOhNYOhLRTD0T2o =} expected: {l:32 b:hz / peGdAuJRqXXf8RXlIEtc + 8CQBNBHngjeC5skUVWc =}

  2012-10-05 16:52:42, 000002 a-1 CSI Info [SR] could not reproject corrupted file [ml:48 {24}, l:46 {23}] '------? \C:\Windows\SysWOW64"\[l:24{12}]"msjint40.dll '; source file in the store is also corrupted

  Thank you

  Heather

  The date of 07/14/2009 of the file is correct.

  Did anything else on PC donations problems?

  You have a real MS win7 dvd or only a recovery disk?

  If you run chkdsk which reveals problems?

• Error on planning time (problem)

  Hi guru,.

  I have a problem with planning time in operator ODI.

  I have a delay between the time clock in the designer and run calendar.

  For example, the designer I look 14:00. So I try to plan the work at 14:03. But the work starts at 16:03. Why?

  I tried to change the odiparams.bat in this way: ODI_ADDITIONAL_JAVA_OPTIONS: = ""-Duser.timezone = Europe/Dublin "." But nothing of.

  The server that is running ODI is crimped (UTC + 01:00) Amsterdam, Berlin; Berne, Rome, etc...

  ------------------------------

  The ODI version: 10.1.3.5

  S.O.: Win server Datacenter R12 2012.

  Oracle 11g

  Thanks a lot for your quick return.

  Best regards.

  Thank you all. It's the job.

  Solution: Download a JRE 1.5.0_22.

  After I changed the ODI_JAVA_HOME Variable system in this way:

  

• Error to plan a custom task

  Logic of job scheduling:
  
  SQL query for a list of the user id
  For each user to get resource objects
  UPN for AD resource if update status 'set up' or 'activated '.
  
  (1) time that schedule deals task 500-600 users I get following error in the log for each subsequent user.
  
  09:42:27, ERROR 608 [XELLERATE. [Method / class of DATABASE]: tcDataBase/readPartialStatement some problems: ORA-01000: cursors open maximum exceeded
  
  java.sql.SQLException: ORA-01000: cursors open maximum exceeded
  
  at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
  
  (2) I do check the method of isStop() and try to return from code, but schedule the task continues to run until all users are treated.
  
  NOTE: Number of users to deal with is 9-10K.
  
  Thank you very much.

  -Do FORCE and still one thing you can do is raise open_cursors to * 1000 * or something.
  -isStopped() should work in this case

  Thank you

  Sunny

• error Smart view

  Hello
  I use v 11.1.1.1. I have planning services provider in Smart mode connection. My data forms open properly. But when I try to execute business rules I sent an error message-
  
  XML load error: the following tags were not closed: res_EnumRunTimePrompts.
  
  After okaying when I run a rule he says-
  
  Error provider planning
  
  Can anyone out there help to rectify the problem?
  
  Thank you.

  What version of IE are you using? I wonder if that could be the problem.

  Have you tried to delete the temporary internet files etc...

  SEB

• All my instruments back VISA errors

  I recently added the cryogenic temperature controller pilot Lake Shore model 336 in the folder instr.lib under program files of National Instruments. When I tried to run one of the example programs accompanying the driver, LabView gave:

  1073807346 error occurred while VISA opening to edge the Lake 336.lvlib:Initialize.vi-> Lake Shore 336 write Curve.vi

  Because I was working on an another VI at the time I just ignored the error and planned to fix it later. The other program, which had a servo error since last week-free motor, are also starting to give an error:

  Error 1073807343 has occurred to clear VISA

  Improper installation of the Lake Shore drivers affect somehow my other instruments? I am running LabView 2012 and have NI-VISA 4.6.

  Thanks for any help.

  Lakeshore pilots apply their own version of VISA?  Sometimes conflicting versions of VISA can cause problems.

  Lynn

• error-200279 card USB-4431 DSA

  

  I use USB-4431 dynamic signal acquisition card.  I have the program set out in the attachment.  I am trying to generate a control shaker random vibration signal and at the same time reading back 2 analog inputs. When I run my code with the full program, I have error-200279 but when I split the acquisition & code generation and put it in a stand alone vi and run it in itself, I don't get any errors.  I tried the different sampling frequencies and samples/channel.  one that seems to work best is when I'm 60 kHz and 20Ks/channel sampling.  My requirement is an example for the acquisition of 200 kHz ane 20Ks/channel.  I've been monitoring the node available samples/channel and seems to continue until no more samples are available and it shows 0.  I need to make these 2 tasks to run correctly in the main program, which is an event focused on loops of master/slave.

  Hi ssherian,

  The USB-4431 is a sampling frequency maximum of 102.4 kech. / s. If your application requires a 200 kech. / s, you will have to use a PCI or PXI-based DSA with a sampling rate WAS higher.

  What about the 200279 error, this error is usually due to a problem with the DAQmx hardware buffer. With a continuous acquisition, a good rule of thumb is to have 10 x the number of samples to read sample rate (i.e. the sample rate = 10000 s/s, samples read = 1000). It is also possible that your computer simply cannot process the data quickly enough. If you perform any complex, analysis of real-time data the processor of your computer simply may not able to catch the flow.

  This KB: error-200279 DAQmx Read Error provides an overview of together in-depth to error 200279, possible causes and measures to resolve the error.

  Hope this helps,

  Chris G

• Windows Update: failed. __Code 643 windows Update encountered an unknown error. _ * AND * __I cannot repair Windows 7 with the disc either. My guess is: these issues are related...? __

  I have THREE questions which PEUVENT all be linked togther... What do you think?

  [I am slot as Windows 7 Ultimate (free upgrade to Dell PC w/purchase) on a Dell 64 bit PC XPS435]
  I've upgraded from Vista about 3 weeks ago.

  #1 - Two weeks ago I had a problem with the installation of Nero/LiquidTV-TiVo to my PC... (this is also when the problem started).
  To get the "Nero" thing figured out, I took the advice of someone on the Forum/Blog of Nero. The person has provided a lenghty explanation how to uninstall LiquidTV completely by removing the registry files... I don't really know what I'm doing in the registry, but everything that I helped my problem of Nero, but I couldn't tell you WHAT I deleted OR if I have deleted any bad subfolders or whatnot!... the next time I started my PC is when the NEW NUMBER is right.

  #2 - On my next BOOT, Windows Update has found an IMPORTANT update:

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

  .. .and it fails every time, it tries to install saying this:

  Windows Update - failed

  Code 643 Windows Update encountered an unknown error.

  "Get help with this error" provides little or no help... but it says this:
   "WindowsUpdate_00000643" "WindowsUpdate_dt000"
  
  All the research I did, the problem seems to be with Microsoft .NET Framework... .and all the solutions I found talking about it, "UNINSTALL all THE .NET FRAMEWORK & REINSTALL" ... I tried and there is no .NET Frameworks listed in Add/Remove, and when I press on ' VIEW INSTALLED UPDATES'... " on my PC it says, "no updates are installed on this computer"... what the _____?

  #3 - Today, I thought I would just pop the WINDOWS 7 installation disc and do a repair/upgrade... It will not be upgraded.
  He cycles most of the way through, then he Has STOPPED and says this:

  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task, (it lists only a SINGLE task), and then restart the upgrade to continue.

  • Windows needs to be restarted if necessary to system files can be changed before you continue.

    Does not help restart. He tried 3 times and he ends up doing the same thing.
    Is it possible I deleted something out of the register so far here and which is cause of all this?
    If so, is it possible to fix WITHOUT doing a new install of Windows 7?
    OR... anything can be a problem... Please HELP!

    (And please note: I am a first year student college with specialization in computer science... but I just started last semester, so I don't know what I should... yet. - though, I SHOULD have known better than to mess with the registry!) My bad).

    Thanks a lot for your time in advance, and I look forward to hear from you!  VikeMike4
    

  Erwan,
  You must read this entire thread and the State, if you have tried the steps listed here or that you tried to fix the problem.  Take a look at this article, because it has a solution for 643 errors: KB971187
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Terminal Services WMI provider DLL is missing

  I have Windows POS 2009 ready installed.  The "WMIC SERVICE LIST" command fails with the absent error provider.  I checked the systems, and it seems that the "c:\windows\system32\tscfgwmi.dll" DLL is missing.  Anyone know how I get this installed on my system or what package installs this dll?

  I see it on m another system, but I can't determine what package installs.  I have all the updates that are installed.

  Please report all further follow-up replies to your new thread in the Windows Embedded POSReady forum: http://social.technet.microsoft.com/Forums/en-US/b4773ed4-23f3-4abf-ab8f-10f2b1d9198e/missing-terminal-services-wmi-provider-dll?forum=posready

  That being said, you could see http://support.microsoft.com/kb/822664

• System error: the program cannot start because mscms.dll is missing on your computer. Try reinstalling the program to fix this problem

  My system is Windows 7 64 Bit OS:

  Description of the problem:

  I get the error above with several programs: MS Money, MS Office and Picasa, but not all programs. Ex: Firefox, IE

  With Microsoft office programs, I get this error and when I acknowledge the error by clicking OK, application starts normally. With Picasa, I get the error and Picasa does NOT start.

  What I have done:

  I uninstalled and reinstalled Picasa without exploitation.

  I already uninstalled the recent programs that I installed on the PC.

  I have also run the command SFC on this file and I get the answer saying "Windows Resource Protection not found any breach of integrity.

  My ideas, please help.

  Ignore this request. I got the problem fixed.

  When I tried to go back to a previous restore point, Windows complained that the disc has errors and should be set before any restoration. Once I corrected disk errors in planning sweeping through reboot, mscms.dll problem disappeared and everything works fine.

  Thank you.

• clock_watchdog_timeout error!

  Hello!

  I recently did some updates and now my computer keeps a clock_watchdog_timeout blue screen.
  This often happens when I play any video, game, or sometimes just randomly freeze my computer.
  I did some research on the error, and he mentions something on the processor. I've recently updated the chipset as well with a driver. I use an ASUS P8P67 motherboard with an Intel i5 - 2500 k (not overclocked) on Windows 8.
  I've attached a dmp file: http://sdrv.ms/18AzoGU
  Any help would be appretiated!

  Thanks for the DMP!

  It is of course the error checking WHEA_UNCORRECTABLE_ERROR (124) .

  This bug check indicates that a fatal hardware error occurred. This bug check uses the error provided by the Architecture (Windows Hardware) WHEA error data.

  Note that this is a material unique error checking, most of the time. The only software that usually cause this error checking are OS utilities BIOS or software such as Asus AI Suite that provide a direct bridge from the OS to the BIOS to make adjustments flies, monitor tensions and BIOS settings, etc.

  If we run one! errrec on the 2nd parameter that corresponds to the address of the structure WER, we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa800dcd6138
  Article @ fffffa800dcd62c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal
  
  Error: Clock (Bank of Proc 0 3)
  Status: 0xbe00000000800400
  Address: 0x000000006ba52315
  Misc.       : 0 x 0000000000000000

  It seems an internal CPU clock failed on processor 0 (first and main CPU core) and Cache Bank 3. Of course, we have seen only ONE * 124 landfills, it is difficult to make calls regarding the CPU eventually being the issue.

  There is that for as much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there are no incorrect BIOS setting or to clear the overclock settings - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 as I said above, the only software normal conflict that usually cause * 124 finding bugs is the OS to the BIOS manufacturer as Asus AI Suite utilities. If you have something like this software-wise, remove it as soon as POSSIBLE.

  5 if all else fails, the only one left to do is replace your CPU because it is defective.