Error returned (sometimes) when you use the tag < cfxml >

Similar Questions

• NULL pointer exception when you use the tag ahref

  Hello
  I am writing a file html for the file adapter. Inside the transformation, if I understand ahref* tag, I still get null pointer exception and a 0 KB file is written.
  
  However, if I remove the < a href > tag from the code, the html file is generated correctly. But I need to use ahref* tag. Pls help me solve this.
  The details of the error are:
  
  < bindingFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > file:/opt/aia/product/10.1.3.4/OracleAS_MW/bpel/domains/release2/tmp/.bpel_OA_OUT_BPEL_MiddlewareEmailProv_1.0_734ff6b91af23ed1de9191df79ca28b6.tmp/in_Confirmation_FileWrite.wsdl [Write_ptt::Write (ORDER)] - SISM JCA Execute of 'Write' failure due to operation: null; nested exception is:
  java.lang.NullPointerException < / summary >
  < / part > < part name = "detail" > < java.lang.NullPointerException detail > < / details >
  < / piece > < / bindingFault >
  
  Published by: user11119367 on February 9, 2010 21:23

  Hello
  The custom XSD file is not necessary.
  Looks like it's a bug in file 10.1.3.4/10.1.3.5 adapters - it works very well in 11g.

  Whenever there is "a href" tag in the xml support to write to the file, the file adapter tries to get the content of the url real in 'a href' and written to the output file. When I try with any url (say http://www.google.com), the content of google.com is written in the file. If this URL is not accessible (for example http://foo.bar), then you get the null pointer exception. In your case, I think the URL that you are using the payload, is not accessible from your box of soa, or is not a valid URL.

  As a work around 10.1.3.4, I was able to create the XHTML file as follows:
  1 change the link partner of file adapter to use opaque scheme.
  2. in an assign operation, affect the load XHTML to a string variable using ora:getContentAsString ().
  3. Add a java embedding base64 encode the string as follows and assign to the entrance of the file adapter invoke:
  (HTMLString is the string from step 1 variable, InvokeWriteHTML_InputVariable is the input variable to the call on the file adapter operation)

  4. call the file adapter using the input variable in which is written the value encoded in base64.

  you could use the workaround above or rethink your design (if you want to create the XHTML file using bpel only or other means).

  Hope this helps,
  Kind regards
  Yohanna.
  http://www.prshanmu.com/articles/

• Error "Invalid line" when you use the command tableFile - ttImportFromOracle

  Execution of the order and got an error, as shown below:

  c:\oracle>ttImportFromOracle -oraConn myUser/myPassword@myDB -tableFile C:\oracle\table_list.txt
  Error: Invalid Line 'mySchema.myTable2' in file 'C:\oracle\table_list.txt'
  Use '-help' for more information
  
  

  table_list.txt looks to below, except I have 112 tables total in the list, a table by line, as indicated in the help documentation.

  mySchema.myTable

  mySchema.myTable1

  mySchema.myTable2

  I tried to make the file table_list.txt have only the table (without figure) names and the same error occurs.

  Invalid line is always the last table in the file. So if I take off the table she complains, she complains always just whatever the table is the last in the file.

  Can someone tell me what I am doing wrong?

  Thank you

  Matt

  To work around the error, I just used - tables instead.

• Get the error when you use the Oracle 9.2 on RRS 4 installation

  Hi all
  
  I was getting error while installing oracle 9.2.0.4 in Red hat advanced server 4
  
  YES was generating a message

   could not able to relink ins_sqlplus.mk  and ins_rdbms.mk

  but I'd ignored, after installation of the oracle s/w, I relinked bleow files
  
  I also tried running the command below
  

  [oracle@oracle lib]$ make -f ins_sqlplus.mk install
  
  but when i try to make ins_rdbms.mk i was getting a error
  
  [oracle@oracle lib]$ make -f ins_rdbms.mk install
  .
  .
  .
  .
  .
  ..
  .
  u01/app/oracle/product/9.2.0.1/db_1/lib32/libgeneric9.a   `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -Wl,-rpath,/u01/app/oracle/product/9.2.0.1/db_1/lib:/lib:/usr/lib -lm    `cat /u01/app/oracle/product/9.2.0.1/db_1/lib32/sysliblist` -ldl -lm    -lvsn9
  /usr/bin/ld: crt1.o: No such file: No such file or directory
  collect2: ld returned 1 exit status
  make[1]: *** [/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib/extproc32] Error 1
  make[1]: Leaving directory `/u01/app/oracle/product/9.2.0.1/db_1/rdbms/lib'

  Please suggest me if this will have an impact on the DB
  
  Published by: user00726 on July 8, 2009 23:06

  If the error only occurs when you start the dbca Wizard, the database itself should be ok. Before using it for the production you can stress test your db using swingbench or hammerora to be sure that iti works well.

  Concerning

  Oliver

• To access the properties of an Error Message When you use the DisplayRunTimeErrorDialogEx method

  I have a reminder that displays the standard runtime error dialog box using the method Engine.DisplayRunTimeErrorDialogEx of custom error. http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/engine_displayruntimeerrordial....  The parameters of this do not allow me to specify information about the error message available (via the properties of the stage of the appeal of error).  However, when built-in bed in treated TestStand display dialog runtime error through its methods of error handling he managed to fill in the details about the error.

  Anyone know how I can fill in the details and the error code from the dialog box fields when you use the DisplayRunTimeErrorDialogEx method to call it? See attached screenshot by one example of what I get when I use this method.

  Kind regards

  David

  Doug is correct; each sequence in the call stack has its own sequence context, so if you just "ThisContext" for the sequence context parameter, you provide the framework for the error callback, which has no error.  To access the context of the sequence that wrong, you use the caller property to get to the next level in the call stack, for example:

  RunState.Engine.DisplayRunTimeErrorDialogEx ("error Dialog", ThisContext.Caller, 0, False, False, False, False)

  I hope this clarifies!

• When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang

  When you use the brush in the development module and I have a lot less brushes to create an image, the program hangs up to what I sometimes have to use windows to complete the task.  I have ICC Intel i7 3.4 and 16 GB of RAM to operate Windows 7.  Why hang up LR

  Doing a lot of brushing up on an image using Lightroom is known to have this problem. The first thing to try is to turn off the graphics acceleration (go to Preferences/Performance tab and then uncheck the box here). IF this does not help, then you can consider doing your brush in Photoshop Elements or Photoshop, instead of brushing in Lightroom.

• get the error when you use the TRIM method in the collections

  Hi Experts,

  When you use the TRIM method I get below error. I make any mistake here?

  DB: Oracle 11g

  SQL > declare

  2

  emp_tab of type 3 is the employee table % rowtype index directory.

  4 l_emp_tab emp_tab;
  5

  6 start

  7

  8 select * bulk collect into l_emp_tab of employees;

  9 l_emp_tab.trim (5);

  10 dbms_output.put_line (l_emp_tab.count);

  11

  12 end;

  13.

  l_emp_tab. Trim (5);

  *

  ERROR on line 9:

  ORA-06550: line 9, column 2:

  PLS-00306: wrong number or types of arguments in the call to 'TRIM '.

  ORA-06550: line 9, column 2:

  PL/SQL: Statement ignored

  Thanks in advance for your help.

  See you soon,.

  Suri

  For PL/SQL collections "index by" you cannot use the TRIM function. If your collection statement excludes the portion "index of...» ", then you can.

  Gerard

• Error message when you use the menu buttons in IE but not chrome

  Hello.

  My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.

  Website: vanletteringco.com

  You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?

  Thank you

  GAV

  Gavin,

  Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.

  Kind regards

  Sachin

• When you use the Windows XP Mode integration, it fails; maintains a new attempt and finally I have to cancel

  When you use the Windows XP Mode integration, it fails; continues to try again and finally I cancel it. The same newspaper for Virtual PC on the host computer has the following error message: Windows XP Mode integration error 'failed to connect in place inside the "Windows XP Mode" VM on channel 0 on the... named pipe endpoint XP, TCP port 3389 with the 0x8007274c error mode. This error occurs every time, but I don't know why he is successful a few times and sometimes fails. This question was in another post and mentioned the removal and resettlement components of integration, which I've tried, but it did not help. I also checked that I have the latest version of the integration components (v. 14.1.7600.16403). I have a separate instance of Virtual PC that I brought over my old XP machine and it was never a problem with integration. The problem with the image in XP Mode occurs also, regardless of whether or not the other Virtual PC image runs. Only the image of the XP Mode has this problem. I suspect it's perhaps a conflict of TCP port in the named pipe, but if so, I don't know how to solve. Thanks in advance to anyone who might be able to offer advice.

  Thanks for the reply. I tried to reinstall the integration features in the past, but the problem has come back at a later date. A few days after I posted this request for assistance, I needed to log out of Windows 7, so I hibernated the XP Mode image. Then, I opened a session in Windows 7 and thought I'd give it a try once again, and it worked this time! I did nothing special. So hopefully that will happen in the future, just as it went and on the past few months. Enjoyed your attempt to offer advice, however!

• Message box color settings disabled when you use the dialog "Windows color and appearance".

  When you use the configuration dialog box 'Window color and appearance', why are there color settings invalid?  I want to remove the default 'Pastel Pink' value that I find unacceptable.

  I can switch to "Classic Windows" that uses no pastel pink color, but "Classic Windows" does not support "Aero Peek", and the windows look pretty tired.  You can only take "Classic Windows" for many years.

  Color settings are disabled for: buttons, Message box, title of Palette, scroll bar.

  Help, please!

  Me too I'm frustrated by that.   Found the old windows with very honest XP environment.   I used the advanced settings, but has not found a way to save the changes with a label, so I knew that the changes you made.   It is just Frigging trial and error and very frustrating.

  Why are there no way to return either to the default value (not found a default label) or save the settings changed under a name?    It is a productivity KILLER.

  Hello

  Interface user of Windows 7 is theme based. The colors are defined by the theme.

  You still have many color options that can be used to change the colors.

  Right click on the desktop and select Personalize. Click on the color of the window at the bottom of the window box.

  You can select one of the colors in the boxes colored at the top.

  Adjust the intensity of the color with the cursor.

  Click on the color down mixer and you can a lot of variations on all the different color choices.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

• When you use the "Fill &amp; sign PDF" feature, is there a way to stretch to resize the text box, to an area of the page... rather than through a long straight line...?

  When you use the "Fill & sign PDF" feature, is there a way to stretch to resize the text box on a specific area of the page... instead of the text box is in a long straight line...? I do not see there is an option or the ability to do so, just want to confirm.

  Improving the management of multiple line text fields is in our plans, but for now, you need to add manual carriage return (Enter).

  Thank you

  Josh