Error trying to configure user IOM to Active Directory by using SSL
Hi allI am able to see users through LDAP over SSL browser but get the following error trying to configure users IOM to RFA by using SSL.
I use Microsoft Active Directory 9.11 connector type.
Answer: Connection error encountered
Description of the response: error occurred when connecting to the target system
I did a few tests using the "diagnostic dashboard" and here are the results.
Name of the test: target system SSL verification of approval: past
Name of the test: test basic connectivity: failure
Exceptions:
ITResource of the informative values are not correct. Enter the correct values.Name of the test: Test commissioning: failure
java.lang.reflect.InvocationTargetException
javax.naming.CommunicationException: simple bind failed:
Unable to find the path of valid certification for target asked.
Note: Without SLL got past all of the above tests.
Can someone help me with this question.
Thanks in advance.
Pradeep Kumar.
It shows clearly that it is not able to connectto AD to the SSL port.
What are the values you gave in ADITResource as port no. * 636 * and SSL enabled true/yes etc.
Are you sure that your certificate is correct and you are able to connect to AD to the port 636?
JXplorer can test SSL...
Tags: Fusion Middleware
Similar Questions
-
Hi, personal related Qus with several user accounts in active directory for a different purpose, at the time of employees who leave employment what is the easiest way to track and disable all the user id created for him? sort of put a link if I disable the main account, other accounts will be disabled?
Active directory and the server are better asking questions about Technet. http://social.technet.Microsoft.com
-
I want to be able to allow user group to be able to reset passwords and create accounts in an organizational unit. I delegate control of the organizational unit for the group, but if I connect to the domain controller and try opening users and computers active directory, we wonder an administrator password. I have a mix of two domain controllers Server 2003 and a Server 2008 DC. Is there a way to give a group access to the users and computers active directory without being administrator?
For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.
Thank you. -
We look for details user for all users directly from Active Directory in a webcenter portal application?
Hi again.
Is not just WebCetnerDS in WebLogic... If it's a CustomPortal you had created a CustomPortalDS.
You need to do a DB connection in your y JDeveloper Portal App than a link to the WebCenterDS schema.
Deployment and testing of your WebCenter Portal: Application Framework - 11g Release 1 (11.1.1.7.0)
Follow the links provided by Vinay on the WLST.
Kind regards.
-
Temporary disable user accounts in Active Directory
Hello
How COMPUTER administrators to connect the portal of identity (COMPUTER store) and temporary management may disable user account in Active Directory?
How can we give the portal higher priority than the target system where the user status comes (HR DB)?
You can allow users in the Administrators role COMPUTER have access to the portal by SSO or normal connection. In this regard to disabling AD account is, are there at - it no criterion based on who you are disabling the account in AD? Or you can just provide the button turn off and attach it to the "IsTemporaryDeactivated" column in person?
How can we give the portal higher priority than the target system where the user status comes (HR DB)?
-For that you can expand the table person from time to time updates the portal with an update say type 'W' for the web and do not leave any extract DB HR for this type of update.
HTH
-
Commissioning: IOM to Active Directory users
Dear Experts!
I am configuring the IOM to AD provisionig. I want available to users of the IOM to AD.
I will follow this documentation/tutorial:
http://download.Oracle.com/docs/CD/E11223_01/ doc.910 /e11197/deploy.htm#insertedID0
I also read this:
http://www.Oracle.com/technology/OBE/fusion_middleware/im1014/OIM/ad_provision/prov2ad.htm
But it simply doesn't. The EEG provisioned resource always status rejected in the (to-do List-> open tasks).
Then I tried to test the connection to AD using this documentation:
http://download.Oracle.com/docs/CD/E11223_01/ doc.910 /e11197/testing.htm
And I get this error in the console:
http://img689.imageshack.us/img689/3190/errorq.PNG
The resource: ADITResource looks like this:
Path of the Script of Prov. Remote Manager:
FQDN of the admin: [email protected]
Use SSL: No
Research of Remote Manager Prov.: AtMap.AD.RemoteScriptlookUp
Target local time zone: GMT
Port number: 636 + +.
ADUser AtMap: AtMap.AD
Definition of research for ad group: Lookup.ADReconciliation.GroupLookup
isUserDeleteLeafNode: No
Allow the Provisioning of password: No
UPN domain: domain - test.local
AtMap ad group: AtMap.ADGroup
ADAM LockoutThreshold value: + 5 +.
Feel: No
Admin password: *
Invert nickname: No
The root context: dc = test-domain, dc = local
Server address: tests - server.domain - test.local
Could be the problem that I do not use SSL? I don't set the passwords in AD, I read that then I don't need SSL...?
I'm new to IOM, then your answer is greatly appreciated!
I thank very you much in advance!YAA thats right, it's research. The error you are getting is for the reason that you provide an incorrect value for the Organization in the form of process. Refer to the next section of the deployment document before continuing with the commissioning.
* 3.3 scheduled for Lookup field synchronization tasks *.
The thing that you are missing is to run the reconciliation of research before you run the actual commissioning. This process ensures that the attribute which you try to provision exist on the target. In this case the Organization field should be close to the target before being used as a process, and since you are passing as empty, as a result, you get the error.
Solve this problem and try.
Thank you
Sunny
-
ESX4.1 SSH user access to Active Directory.
I have one of my servers for improved test of 4.0 update 2 for ESX 4.1. I'm trying to understand how to configure SSH access to my Active Directory account. I joined the host to active directory and granted my acount AD permissions on the host computer. If I try and ssh to the host with my AD account I get access denied. I can connect via the Client vSphere with my AD account successfully. SSH works with a local account on the server ESX4.1. I tried both with just my username to the SSH connection as well as domain\username. User domain\username using is actually suspended the host and I need to do a hard reset to get it back.
Someone does it that it works?
4.0 Update 2, I used esxcfg-auth - enablead and then created a user without password on the host computer. This command no longer exists on 4.1 however.
I would like to do an update here for those interested. I found it frustrating that the access AD kerberos from vSphere 4.0 to 4.1, ssh disabled unless you have used the "Authentication AD" via the VI Client configuration. I ran into the same issue with JEPP 0 errors and the server actually restart itself trying to ssh using my AD account. The problem is that if you are part of > 30 security groups (in my case it was only 23), the server lock herself up and sometimes even restart. I validated with another AD account that was only member groups of 3 seconds and he was able to connect without locking ESX or causing a reboot.
In addition, in my laboratory, where I run VCenter 4.1 and both nodes are now 4.1, I use authentication 'AD' and it works very well with only a part of a limited number of groups SEC users in AD.
VMWare said that this issue was refitted to engineering.
FYI, this affects the ESX and ESXi.
-
Error in mscomct2.ocx after application of active directory
Hello!
I developed a system of inventory for my business application, that I am currently working.
The application is developed using VB6 and works perfectly until the Active Directory is implemented.
The error will like "component mscomctl.ocx or one of its dependencies is not correctly registered... etc.
I already checked the administrator account and tried the app and it works exactly the way it should be.
I have already ruled out the user to the list of unauthorized users and included everyone in the group. I rebooted the computer several times.
I guess that active directory is causing the problem.
The error goes to the time windows 7 & 8 (64-bit)
Please help me.
Thanks in advance
Hi Owen,.
Welcome to the Microsoft community.
The question you posted would be better suited in the TechNet Forums. I suggest you to ask your question in the TechNet Forums for assistance.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.
Thank you
Kulu Sharma.
-
User of MS active directory (MSAD) could not connect to the Hyperion Planning
Hi all
Firstly I have properly configure MSAD shared services.
I am trying to configure a MSAD user and use it to connect to shared services and it can connect successfully.
but when I try to connect to a hyperion planning I got this error:
* "failed to synchronize with the provisioning of users."
Everyone knew why this is happening or have experience the same problem?
Thanks for the help.
FeriIs it 11.1.2.0 or 11.1.2.1 you run as a SQL Server 2008 R2 is supported only with 11.1.2.1
See you soon
John
http://John-Goodwin.blogspot.com/ -
IOM with Active Directory password synchronization
Hello people:
On the Active Directory Connector:
It is possible that the user name and password to access the Oracle Identity Manager is the same when configure you the application to Active Directory and with the same key to access my workstation
Thank youThere are two things:
Movement of IOM to AD password: can be done easily on port 636 (SSL) with AD user management connector
Password AD to IOM movement: need of the IOM AD password sync connector. Available on OTN. -
How to export users and groups Active Directory of hyperion shared services
Hello
We are on 11.1.2.3 and in a situation where we need to export all users and groups of shared services, including the native directory and Active Directory users and groups.
Current method of LCM export only the NativeDirectory user and groups. -is this correct?
Is there a way to export all users and groups including NativeDirectory and ActiveDirectory?
Please suggest.
Thank you
I don't think that there is a way to make the groups and users to the AD, and I wouldn't.
You need to connect the next AD system and pull on the users and groups in this way.
-
WebLogic with Active Directory SSO using the Ondaaah
Hello
I tried to configure Ondaaah for Weblogic, but it does not work.
I followed exactly the Oracle documentation: Configuration Single Sign-On with Microsoft Clients
Also I tried other resources, but without success.
Example: How to set up a SINGLE Kerberos/SPNEGO with Oracle WebLogic Server browser-based authentication
My main problem is that I can not really why it does not debugging.
Can someone help me to direct me in the log file I can investigate the problem?
Some info:
KDC is a win2k8r2
krb5.ini
[libdefaults] default_realm = EXAMPLE.COM default_tkt_enctypes = des-cbc-crc default_tgs_enctypes = des-cbc-crc ticket_lifetime = 600 [realms] EXAMPLE.COM = { kdc = 192.168.0.94 admin_server = vs-w8kr2-dc1 default_domain = EXAMPLE.COM } [domain_realm] .example.com = EXAMPLE.COM example.com = EXAMPLE.COM [appdefaults] autologin = true forward = true forwardable = true encrypt = true
generation of key file
ktpass -princ HTTP/[email protected] -mapuser wlsuser -ptype KRB5_NT_PRINCIPAL -pass Welcome1 -out wlsuser.keytab -kvno 0 -crypto DES-CBC-CRC
kinit result
java -Dsun.security.krb5.debug=true sun.security.krb5.internal.tools.Kinit -k -t wlsuser.keytab HTTP/[email protected] >>>KinitOptions cache name is C:\Users\Administrator.EXAMPLE\krb5cc_Administrat or Principal is HTTP/[email protected] >>> Kinit using keytab >>> Kinit keytab file name: wlsuser.keytab >>> KeyTabInputStream, readName(): EXAMPLE.COM >>> KeyTabInputStream, readName(): HTTP >>> KeyTabInputStream, readName(): vs-ucm-cs-pro.example.com >>> KeyTab: load() entry length: 69; type: 1 Added key: 1version: 0 Ordering keys wrt default_tkt_enctypes list Config name: C:\Windows\krb5.ini default etypes for default_tkt_enctypes: 1. 0: EncryptionKey: keyType=1 kvno=0 keyValue (hex dump)= 0000: D3 E6 AB F1 91 B3 B0 D3 >>> Kinit realm name is EXAMPLE.COM >>> Creating KrbAsReq >>> KrbKdcReq local addresses for VS-UCM-CS-PRO are: VS-UCM-CS-PRO/192.168.0.161 IPv4 address VS-UCM-CS-PRO/fe80:0:0:0:48c0:4405:c018:7969%11 IPv6 address VS-UCM-CS-PRO/fe80:0:0:0:383e:e3d:3f57:ff5e%13 IPv6 address VS-UCM-CS-PRO/2001:0:5ef5:79fb:383e:e3d:3f57:ff5e IPv6 address >>> KdcAccessibility: reset default etypes for default_tkt_enctypes: 1. >>> KrbAsReq calling createMessage >>> KrbAsReq in createMessage >>> Kinit: sending as_req to realm EXAMPLE.COM >>> KrbKdcReq send: kdc=192.168.0.94 UDP:88, timeout=30000, number of retries =3 , #bytes=261 >>> KDCCommunication: kdc=192.168.0.94 UDP:88, timeout=30000,Attempt =1, #bytes= 261 >>> KrbKdcReq send: #bytes read=268 >>> KrbKdcReq send: #bytes read=268 >>> KdcAccessibility: remove 192.168.0.94 >>> reading response from kdc >>> KDCRep: init() encoding tag is 126 req type is 11 >>>KRBError: sTime is Mon Aug 05 10:55:20 CEST 2013 1375692920000 suSec is 298089 error code is 25 error Message is Additional pre-authentication required realm is EXAMPLE.COM sname is krbtgt/EXAMPLE.COM eData provided. msgType is 30 >>>Pre-Authentication Data: PA-DATA type = 19 PA-ETYPE-INFO2 etype = 1 PA-ETYPE-INFO2 salt = EXAMPLE.COMHTTPvs-ucm-cs-pro.example.com PA-ETYPE-INFO2 s2kparams = null Kinit: PREAUTH FAILED/REQ, re-send AS-REQ Updated salt from pre-auth = EXAMPLE.COMHTTPvs-ucm-cs-pro.example.com >>>KrbAsReq salt is EXAMPLE.COMHTTPvs-ucm-cs-pro.example.com default etypes for default_tkt_enctypes: 1. Pre-Authenticaton: find key for etype = 1 AS-REQ: Add PA_ENC_TIMESTAMP now >>> EType: sun.security.krb5.internal.crypto.DesCbcCrcEType >>>crc32: cf91be86 >>>crc32: 11001111100100011011111010000110 >>> KrbAsReq calling createMessage >>> KrbAsReq in createMessage >>> Kinit: sending as_req to realm EXAMPLE.COM >>> KrbKdcReq send: kdc=192.168.0.94 UDP:88, timeout=30000, number of retries =3 , #bytes=341 >>> KDCCommunication: kdc=192.168.0.94 UDP:88, timeout=30000,Attempt =1, #bytes= 341 >>> KrbKdcReq send: #bytes read=94 >>> KrbKdcReq send: #bytes read=94 >>> KdcAccessibility: remove 192.168.0.94 >>> reading response from kdc >>> KDCRep: init() encoding tag is 126 req type is 11 >>>KRBError: sTime is Mon Aug 05 10:55:21 CEST 2013 1375692921000 suSec is 548089 error code is 52 error Message is Response too big for UDP, retry with TCP realm is EXAMPLE.COM sname is krbtgt/EXAMPLE.COM msgType is 30 >>> KrbKdcReq send: kdc=192.168.0.94 TCP:88, timeout=30000, number of retries =3 , #bytes=341 >>> KDCCommunication: kdc=192.168.0.94 TCP:88, timeout=30000,Attempt =1, #bytes= 341 >>>DEBUG: TCPClient reading 1592 bytes >>> KrbKdcReq send: #bytes read=1592 >>> KrbKdcReq send: #bytes read=1592 >>> EType: sun.security.krb5.internal.crypto.DesCbcCrcEType >>>crc32: 3d4ff0db >>>crc32: 111101010011111111000011011011 >>> KrbAsRep cons in KrbAsReq.getReply HTTP/vs-ucm-cs-pro.example.com New ticket is stored in cache file C:\Users\Administrator.EXAMPLE\krb5cc_Admini strator
krb5login.conf
com.sun.security.jgss.krb5.initiate { com.sun.security.auth.module.Krb5LoginModule required principal="HTTP/[email protected]" useKeyTab="true" keyTab="d:/admin/kerberos/wlsuser.keytab" storeKey="true" debug="true"; }; com.sun.security.jgss.krb5.accept { com.sun.security.auth.module.Krb5LoginModule required principal="HTTP/[email protected]" useKeyTab="true" keyTab="d:/admin/kerberos/wlsuser.keytab" storeKey="true" debug="true"; };
setspn-L wlsuser
Registered (SPN) for CN=wlsuser,CN=Users,DC=example,DC=com: HTTP/vs-ucm-cs-pro.example.com
Post edited by: 2ec502e6-de7d-4cb9-a5b2-5b8f18f80881 Added setspn - L...
Hi, it works!
Thanks to your debugging indicators and a new machine!
The SSO works perfectly on another machine. So please do not test SSO on weblogic machine...
-
Hello
I tried to find documentation for the three ESX5.1 services to understand when they should be or should be used, but have found nothing to help.
I have several 5.1 ESXi hosts managed by vCenter 5.1 (with SSO of course), as well as Active Directory configured as an identity Service.
In addition, I joined the hosts ESXi 5.1 for the Active Directory domain to allow AD authentication for host management direct when necessary.
It all works well, however, there are three Active Directory related services that are stopped, so I'm trying to determine if they should really be executed to perform certain functions that are not obvious to me at the moment.
The three services are:
- Local security authentication server (Active Directory Service)
- Server connection network (Active Directory Service)
- I/o Redirector (Active Directory Service)
I believe that some or all of these services are related to the integration of the 'same' in ESXi, but this does not really explain what they are doing, especially since I see no problems with authentication.
Any idea would be appreciated.
Thank you
Rob Ralston
OK, I answered my own question. Turns out that I had a confusing situation because I didn't have to reboot the host after the join domain operation.
Now, all three services are started with the parameter 'Start and Stop with Host.
So, while I have not seen any specific documents, it is clear enough, that these services are designed to run after the junction, that make sense.
Rob
-
Vista - Photo Gallery
Tried to upload a .jpg from an SD card image (the image was scanned with a Pandigital Photo converter, slide, negative (model # 05 PANSCN).) This message appeared in the photo gallery, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "I inserted the SD card even in a HP Photosmart C6280 printer; the printer has recognized the file and print the photo. The converter from Pandigital is useless unless the Vista updates can 'cure' photo gallery. What do you, Microsoft?
Tried to upload a .jpg from an SD card image (the image was scanned with a Pandigital Photo converter, slide, negative (model # 05 PANSCN).) This message appeared in the photo gallery, "Photo Gallery can't open this photo or video. This file format is not supported, or you do not have the latest updates to the photo gallery. "I inserted the SD card even in a HP Photosmart C6280 printer; the printer has recognized the file and print the photo. The converter from Pandigital is useless unless the Vista updates can 'cure' photo gallery. What do you, Microsoft?
=====================================
Just one question... when done scanning and recording of the scans...
you select the options to reduce the file size by compressing
the photos?If you have only a few of these scans... you could open their
one at a time in Windows Paint and go to... File / save as...
Enter a new name, choose a backup folder and choose .jpg.
This will create a new version of the same photo and I suspect
It will be compatible with Windows Photo Gallery.Also... it may be interesting to try to install Windows Live Photo Gallery.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Download Windows live Photo Gallery
http://explore.live.com/Windows-Live-Photo-Gallery
(There are other applications included in the download...
Uncheck the ones you don't want)No guarantee... but there is a possibility that reinstall
DirectX can improve this problem.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)End-user Runtime Web install DirectX
http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=enVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Hello
I have two less than my production needs.
(1) we need to delegate control of user not administrator to add the computer to the connection of users to.
(2) we need to add computer accounts in bulk in to each users logon (located; useraccount--> tab account--> logon to the specific logon button--> Add a computer account).
The reason for this is that we must control the users to connect to specified computers and will be managed by our resource allocation Manager (it will add or delete based on the requirements of the production. It must only have the control to add / remove option Logonto computer accounts.)
Please suggest.
Best, Surendra
This issue is beyond the scope of this site and must be placed on Technet or MSDN
Maybe you are looking for
-
The MacMini (late2009) is this compatible w/Sierra?
The MacMini (late2009) is this compatible w/Sierra?
-
I'm new on this and am going to buy a laptop for the first time. We love apple. The MacBook Air Book and Air Book Pro is better than other brands. What are the positive and negative points. Also, can you get word, excel, and these options as well? T
-
How can I sort a column of short phrases in numbers?
For example, "search for" appears as a first, second and third word in some sentences in column B, but not in all. How can I make the phrases "search for" in a column on a new sheet? I repeat this process for other keywords to make them into categori
-
Saturday A300 - USB ICH8 Family USB Universal Host Controller does not work
Device: Intel(r) ICH8 Family USB Universal Host Controller - 2830 until 2836 and 283 has DriverVersion is: 8.0.0.1008DriverDate: 15.09.2006 does not work! Can someone help me? Where can I find the real driver? Thanks in advance. Chris
-
Bridge configuration with comcast - need to change password
Hello I have a NetGear R6300 I use in conjunction with my comcast router (router comcast serves as a bridge). I am able to access the router to comcast, but cannot access the netgear router. We use the netgear as thoughout the home wi - fi router bec