Error using the USGA GHIN App
I post my golf score after each round. I do it from the parking lot to the golf course. I just got an iPhone 7. Everything about AT & T LTE, I get this message: unable to connect
Impossible to perform the task
at the moment. Please try
again later.
'RETRY '.
It has always worked in the past with my other iPhones. I tried to remove and reinstall the GHIN app, but this does not solve the problem. I think I have all the settings correct. When I go home and connect to the wifi of the GHIN app works very well.
Any thoughts?
Hello davidfromwest greenwich,.
Thank you for using communities of Apple Support. I understand you were able to successfully publish score when on an LTE network. I post quite often play and training progress. I know that this can be a great feature with many applications. I'm happy to help you.
If you haven't already done so, make sure that the cell data are enabled for this application in settings > cellular. If the problem persists try restarting iPhone following the steps below.
- Press and hold the sleep/wake button until the Red slider appears.
- Drag the slider to turn off your device completely off.
- Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
Restart your iPhone, iPad or iPod touch
Also, here is some additional information on the cellular data settings.
On the cellular data settings and usage on your iPhone / iPad
Have a great day!
Tags: iPhone
Similar Questions
-
Error in the Spooler subsystem App 0x000006ba
Found this same problem on answers back in 2010.
My OS is Windows Vista Ultimate 64.
Do not have this problem in the 2 years of the life of this PC.
Try printing and Spooler subsystem App error 0x000006ba. Error of Job Status window Interface also.
Worked on the resolution of this problem for more than 7 days.
The Lexmark printer is connected to the wireless router.
PC n ° 1 with this problem is connected to a Lexmark printer by USB and to the router by cable.
PC #2 is connected to the router via cable and can print on Lexmark without any problem.
PC #3 and #4 PC is wireless to the router and can print on Lexmark without any problem.
I have uninstalled and installed the software Lexmark times more than I can count. After the uninstallation ran I used search and remove related files from Lexmark.
All PC #1 and Lexmark drivers are up-to-date. Latest firmware in the Lexmark. I restored the factory default Lexmark printer.
All Windows updates have been checked twice a day and all the new updates installed.
I ran difficulty he printer Microsoft and test files. Test the printer shows no problems spooler. File test found problems once, then no more after that.
The Lexmark printer icon sometimes disappears from the printer configuration Page.
After the attempt to print and get the spooler error, the printer indicates a job pending. I can not cancel this job and it connects the printer so that other computers can not print with current work on PC #1. Sometimes I stop PC #1 pending work disappeared. Other times, he is not missing.
I searched the web looking for a solution and all Microsoft. Nothing works.
Heeelllllllpppppp!
Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------
Check with Lexmark Support and drivers
Lexmark - Support
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_USLexmark - drivers
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=downloadI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Can I manage an iTunes U course using the iTunes U app?
When I try to access iTunes U Course Manager using Safari on an iPad I'm directed to the iTunes U app. The application can be used to administer the iTunes U course? I want to confirm registration for example, but I don't see how this is done on the app.
Apple provides resources for iTunesU here
https://www.Apple.com/support/iTunes-u/using/
other resources can be found on the web.
-
Sign in error using the Microsoft account for the custom domain
Hello
I'm trying to connect to Skype by using our business e-mail address that uses Windows Live Custom Domain service. After be identified using the link "Sign in with a Microsoft account", the usual "create an account or connect" appears, but two options ("I have a Skype account" and "I am new to Skype") leads to the following error after clicking 'Join Skype': 'there is a problem of signing with Microsoft account. Please try again or connect with Skype details rather than this'. I tried with the two Skype Desktop and on the Web.
Any help is greatly appreciated...
Thank you!
Well, I managed to make it work by creating a new Skype account with the same email as my Microsoft Account address.
-
Re: Satellite Pro L - error using the recovery media creator
Try to copy in memory USB, using Recovery Media Creator, original image from the Pc; just in case of future problems, I get this message: error 040 EAE-02-000000000.
No idea what this means?.Thank you
Hello
Have you tried another USB key? The stick is probably defective, so the recovery media can t create successfully.
Also format the stick before using the recovery media creator.
-
DAQmx 201105 error using the cDAQ 9403 module
I'm using the DAQmx C library of Borland Delphi programming. My hardware configuration is a cDAQ-9174/9178 with a 9222, 9401 and 9403 module. Here's where I manage problems at the moment:
I want to run three different tasks on my 9403 module:
Task1 is an output buffered with frame sample clock/cDAQ1/do/SampleClockTimebase to 100 kHz (channel 0-5)
Task2 is a software-timed output (20-25 channels)
Task3 is a timed software entry (channels 26-31)
Task2 and Task3 me give 201105 errors when I try to use DAQmxWriteDigitalLines and DAQmxReadDigitalLines, respectively. Create channels for these tasks works very well, however. Apparently, there is some reason to believe that the 9403 won't perform Task1, except that it works without raising errors. This work by accident and only because I am using channels 0-5? That's why I'm getting errors when trying to use the tasks 2 and 3?
Any thoughts are appreciated.
Hi André,.
This is expected behavior and is documented in the digital i/o considerations for devices of the series C using DAQmx.
The 9403 is registered has a series module that has the following restrictions:
- You may not use modules series and parallel together on the same task timed material.
- You may not use modules series for the trigger.
- You can do static and timed tasks at the same time on a single serial module.
- You cannot material timing in one direction at a time on a module in the two-way series.
You can do task 1, or you can do tasks 2 and 3. You can not do the tasks 1, 2 and 3 together, as you saw. You can do it with an additional 9403 if you move the software tasks timed to the other module.
The 9401 is a parallel module that does not have these restrictions. Snacking is configurable, however, which means that you must set the direction in groups of 4, but it seems that you are using too many lines for a single 9401.
-
Sudden error using the creator of selections
I have been using creative sanse of selections for Sansa e 200v1 for awhile. All of a sudden, when I try and add a name to my playlist it comes back with an error message:
"Wrong file or number name.
No idea why this is happening?
I used the playlist Sanse (even if it has been awhile) before and can't say I never had this problem. Your player is connected in MSC mode? Are you sure you have refreshed or updated the program after the connection, so this lookiing for a list of songs on the player and/or the card? You could try adding a song that is still in the list of the last time you used the program, but has since been removed from the drive.
-
Hi all
I use OAM 11.1.2.0 and am trying to use the Federation of Oracle for the SSO component. Here's what I've done so now
1. to enable Oracle Federation components
-Journal on Oracle Access Manager
-Click on System Configuration
-Click on the available Services
Result: successfully
2. you want to configure the Federation as an IDP component
-Go to < MW_HOME > / oracle_common/common/bin /
-Executer./WLST.sh
WLS -: / offline > configureFederationService ("displaced persons", "true")
-See below error
Raceback (innermost last):
Folder "system <>", line 1, in?
NameError: configureFederationService
WLS: / offline >
Help, please.
-Go to the
/oracle_common/common/bin /. That is your problem. You use the bad wlst.sh
You must use the wlst.sh which is under Oracle_IDM1.
-
Error using the JDBC connection from 12.4SE
We are upgrading to 12.4 SE and explore using JDBC, rather than rely on ODBC connections. We run on windows and connect to SQLServer2012. I found in the administration guide how to set up. After having GENDAW32 the analysis falls down.
I tried with sometimes a JTDS driver as well as the microsoft JDBC driver.
With the driver microsoft is the error:
SQL Server supports the feature queued at the connection level only. Use the connection.setHoldability () method.
With JTDS driver error is:
CLOSE_CURSORS_AT_COMMIT option is not currently supported by the setHoldability method.
Anyone has any ideas how to fix? All database settings, to change?
My DBHandler settings. Note the microsoft driver failed with the same message without worrying about selectMethod was there or failed
< DBHandler:AMSMRL >
; Class = ODBC
Class = JDBC
CreateIndex = No
Passwd = ~ ENCRYPTED HoHwiD8meYLLIiEGgtE_OA
; Server = AMSMRL
Server = com.microsoft.sqlserver.jdbc.SQLServerDriver; jdbc:sqlserver://server_name_here;databaseName=AMSMRL;sendStringParamatersAsUnicode=false;selectMethod=cursor
; Server = net.sourceforge.jtds.jdbc.Driver; jdbc:jtds:sqlserver://server_name_here/AMSMRL
Debug = Yes
Hello
It is a problem with SQL Server and DB Oracle Documaker JDBC Manager in 12.4.0 GA release.
You will need a fix/patch that should be remedied.
Kind regards
-Steve
-
Export error using the size limit
Everytime I try and export using the ' size limits to "I get an error saying that no photo rendering is on disk (1)
I use windows 8.1 pro x 64
Lightroom 5.7.1
Any help will be greatly appreciated.
Lee
He has had several discussions in the last bugs in the option "limit of the file size. Just do a search on 'limit of the file size' in the forum. I think that some of them have been fixed, but still there may be another or two still in the vicinity.
-
expand the disk error using the cmdlet set-hard drive
Hello
I will try to extend a vmdk with the command set-hard drive the rcli installed to my latptop througth, but I'm getting some sort of syntax error, I think.
I connect the vCenter and can run commands very well...
I use the following commands in the process:
PS C:\ > get-disk hard-vm xxx_teco
CapacityKB persistence Filename
---------- ----------- --------
persistent 31457280 [brjgs163_Storage1_Local] xxx_teco/xxx_teco.vmdk
persistent 5242880 [brjgs163_Storage1_Local] xxx_teco/xxx_teco_1.vmdkthen:
PS C:\ > set-hard drive - vm xxx_teco - hard drive ' [brjgs163_Storage1_Local] xxx_teco/xxx_teco_1.vmdk "-capcity 10485760
then, got the error:
Together-hard drive: Nao e possible associar o Parâmetro 'hard drive '. NAO e possible Converter "[brjgs163_Storage1_Local]" o valor homes don't do tipo "System.String" no type "VMware.VimAutomation.Types.HardDisk".
Em linha:1 caractere:36 + set-hard drive - vm xxx_teco - hard disk < < < < [brjgs163_Storage1_Local] xxx_teco/xxx_teco_1.vmdk - capcity 10485760
+ CategoryInfo: InvalidArgument: (:)) [game-hard drive], ParameterBindingException)
+ FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.Commands.SetHardDiskI have tryied somehow different to specify the disk hard but without success... always get these errors of messages...
any help, please.
The cmdlet Set-HDD wants something, such that returned by Get - hard drive to the hard drive setting.
Easier is to use the pipeline (see also example 1 on the hard disk-Get help).
get-disk hard - vm xxx_teco | where {$_.} {Name - eq ' Hard disk 2 "} | whole-disk hard-capcity 10485760
-
The exprorting error using the parfile - LRM-00109 and LRM-00113
Hello
Getting "LRM" errors when you try to export (exp) using a parfile.
I created this parfile location = ' / backup1/params.txt ' with the following contents inside of her parfile:
QUEUE = Larry.dmp
FULL = n
OWNER = larry
GRANTS = y
LINES = y
COMPRESS = y
Here is that the error codes I received while calling him parfile.
======================================================
[oracle@localhost backup1] $ exp userid=larry/champion@orcl parfile = params.txt
LRM-00109: could not open file "params.txt" settings
LRM-00113: error during the processing of file "params.txt".
EXP-00019: failure of the treatment of parameters, type 'HELP EXP = Y' help
EXP-00000: export completed unsuccessfully
=======================================================
Information on the platform:
OS: Red Hat Ent Linux 5
Version: Oracle 10g R2
Please help.
-Thank you
Prashant DixitPrashant
I would like to change the directory where I want to export.
Then create a pafile here and execution (note the changes and add your system password)
vi out.parm userid=system/
OWNER=larry FILE=larry.dmp log=larry.log STATISTICS=none exp parfile=out.parm FULL and OWNER conflicts, use only one of these modes.
Best regards
mseberg
-
Error using the ColdFusion/Flex Application Wizard
I'm looking forward to use the CRUD from the CF/Flex Application Wizard features. After 4 hours of trying to find the problem, however, maybe someone else can help. The wizard is able to locate and work with a SQL Server 2005 data source and create the application. When I run it however, I have the following error:
(mx.rpc::Fault) #0
errorID = 0
faultCode = "Client.Error.MessageSend".
faultDetail = "error Channel.Connect.Failed NetConnection.Call.Failed: HTTP: status 405.
faultString = "send failed".
message = "faultCode: Client.Error.MessageSend".
faultString = "send failed".
faultDetail = "error Channel.Connect.Failed NetConnection.Call.Failed: HTTP: status 405.
name = "Error".
rootCause = (Object) #1
Code = "NetConnection.Call.Failed".
Description = "HTTP: status 405.
Details = "" http://localhost/flex2gateway " "
Level = "error".
1 flex Integration is enabled on my 7.0.2 Server
2. it looks like a mapping problem
Someone, help please?
Christian Briggs
It was after all the configuration file. Thanks for your help.
The problem:
was always set to false. Thank you! -
Error using the search field to index in flash help
Hello again,
I hope that it will be an easy question. In using Flash, when the tab Index, if I use the search box to find a word index, shows the following error: "a script in this movie is causing Adobe Flash Player 9 to run slowly.» If it continues to run,
your computer may become unresponsive. You want to stop the script? "Note: this works generally the first time that I'm looking for a Word, but if I get a second word it gives the error.
If I DO NOT give up the script, the computer is still slow. If I said to go there and to abort the script, Internet Explorer crashes.
Is there something I can change in the code anywhere to prevent that from happening in the first place? Alternatively, is it possible to change the skin to completely remove this entry field? It is not necessary to our process to have him there, as long as the index entries are there with the scroll bar.
Check it out... looks like a new bug!
-
Is it possible to NOT use the * cloud creative app? This thing sucks Holy shit big time
Seriously, please delete it all. He's not even why using in any sense.
h * he's
Hello
You can install all the applications you need, and then uninstall the application Adobe CC using the uninstall program.
Using creative cloud | Uninstall the creative cloud desktop application
Kind regards
Sheena
Maybe you are looking for
-
Last episode of podcast is not showing in iTunes Store
I help my launch marries a podcast, and we are still pretty new to the process. We noticed that her last episode, posted 6 days ago appears in the my iTunes Podcasts section, as well as on the application of Podcasts on my iPhone. However, it is no
-
Satellite L655-183 - how do I get drivers?
I have observed that this laptop is not more taken in charge on the toshiba Web site.How can I download the new updated for this laptop drivers if the Toshiba support page it tells me that the serial number for this laptop is not valid even if I writ
-
Media why player used my Windows Media Player work?
Should I the proper drivers and sound cards and video? I don't know anything about.
-
Error message 0x8024400a every time I try to use Windows update.
I reinstalled XP Home Edition on my laptop using a recovery disc included when I bought my computer. The re-install worked perfectly out I get the 0x8024400a error message everytime I try to use Windows update. In other words, that I can't install up
-
notbook HP 2000 2d28ca: lost to the bottom of ranking network drivers to win 8-7
I spent to win 8 for win 7, lost some drivers, if I reload 8 victory that will solve my problem? model hp 2d28ca eop81ua #abl network drivers, usb, eathernet all missing, can not conect to the Internet with it!