Error when the layout of the component

Similar Questions

• can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

  Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

  Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

  I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

  I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• How can I configure drive extender? get an error when the computer shuts down say reinstall Extender player

  get an error when the computer shuts down say reinstall Extender player. ? What is it. Thank you

  Hi deener49,

  Please look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_other/please-reinstall-Extender-Player-invalid-or/86692b09-9464-E011-8dfc-68b599b31bf5

• Why do I get an unknown error when the AI document opening in Illustrator 5.5?

  Why do I get an unknown error when the AI document opening in Illustrator 5.5.? How open/fix documents?

  Did this happen after update to Yosemite? Sorry, but this could be a number of things and not only have a response

  • disable the automatic plugin font activator which is delivered with the police officer, you activate a corrupt police.
  • Clean your cache of police download nuke font it's free
  • reset your prefs AI
  • Delete your printer driver in the system preferences and recreate - Yes, there is a possibility that this can cause this
  • hold off on the update to El Captan for now, even if an update of the system has a chance to eliminate the problem, you're on CS5.5

• How to fill the empty space when the component is not visible or hidden?

  I have several components in BorderPane which can be visible or not using not check box. When I put the component not to be visible, I get an empty space I want to complete resizing the next component. What options are available to configure the components to fill the empty space when the component is defined on .setVisible(false); ?

  So that a node only takes place when it is invisible,

  before you change the visibility property, call:

  node.managedProperty().bind(node.visibileProperty());
  

  Or you can simply remove the node from the graphic scene:

  parent.getChildren().remove(node);
  

• [ADF Essentials, JDev12.1.3, MS SQL Server] About to restore backup/restore error when the application is deployed on GlassFish. How...?

  Hallo,

  follow the suggestions of Timo Hahn and kdario , I created a panelTabbed with main tables form & details according to this thread Re: [ADF, JDev12.1.3] Master af:form w/read only af:tables detail: how to handle insert and edit through forms?

  The modification/insertion for readonly tables is managed using a form of popup.

  Before displaying the form, I create a backup that I restore it if the user click Cancel on the shortcut menu.

  Everything works well on the integrated WebLogic Server, but now that I have deployed the application on GlassFish Server I noticed an odd error.

  The < <the connection to the server has failed (status = 500)> > error when I click the button cancel from the context menu (Cancel involves restoring the backup) and the empty line added before opening the context menu and create the backup point is left blank in the table.

  In the server log, I read this error:

  Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: call Impossible a commit operation when the AutoCommit is set to 'true '.

  at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:190)

  The check points are not compatible with GlassFish/ADF Essentials or it is - AS I HOPE -some adjustments to make with regard to transactions in GlassFish?

  Until now I deplyed on GlassFish than an application of readonly.

  I see now that the problem also occurs when the call of the AOS restore operation is should not be due to the use of the backup point.

  It is the configuration of the Connection Pool in GlassFish (sorry it's in Italian)...

  

  StackTrace

  Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Impossibile richiamare one ' operation di commit when the terms AutoCommit e impostata su 'true '.

  at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:190)

  at com.microsoft.sqlserver.jdbc.SQLServerConnection.rollback(SQLServerConnection.java:1958)

  at com.sun.gjc.spi.base.ConnectionHolder.rollback(ConnectionHolder.java:630)

  at oracle.jbo.server.DefaultTxnHandlerImpl.handleRollback(DefaultTxnHandlerImpl.java:149)

  ... more than 92

  # # 0 in detail

  com.microsoft.sqlserver.jdbc.SQLServerException: Impossibile richiamare one ' operation di commit when the terms AutoCommit e impostata su 'true '.

  at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:190)

  at com.microsoft.sqlserver.jdbc.SQLServerConnection.rollback(SQLServerConnection.java:1958)

  at com.sun.gjc.spi.base.ConnectionHolder.rollback(ConnectionHolder.java:630)

  at oracle.jbo.server.DefaultTxnHandlerImpl.handleRollback(DefaultTxnHandlerImpl.java:149)

  at oracle.jbo.server.DBTransactionImpl.doRollback(DBTransactionImpl.java:5279)

  at oracle.jbo.server.DBTransactionImpl.rollback(DBTransactionImpl.java:2558)

  at oracle.adf.model.bc4j.DCJboDataControl.rollbackTransaction(DCJboDataControl.java:1770)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1541)

  at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2218)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:784)

  at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:410)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:254)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:212)

  at oaw.view.beans.NotPrel.cancelButton_action(NotPrel.java:254)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at com.sun.el.parser.AstValue.invoke(AstValue.java:254)

  at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:302)

  at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)

  at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)

  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:168)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:510)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:171)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:111)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:168)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:510)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:171)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:115)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at oracle.adf.view.rich.event.ProxyEvent.broadcastWrappedEvent(ProxyEvent.java:72)

  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:124)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:168)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:510)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:171)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:111)

  at org.apache.myfaces.trinidad.component.UIXComponent.broadcastInContext(UIXComponent.java:364)

  at org.apache.myfaces.trinidad.component.WrapperEvent.broadcastWrappedEvent(WrapperEvent.java:82)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:168)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:510)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:171)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:115)

  at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:759)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:444)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)

  at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1550)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:343)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:217)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:105)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:502)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:327)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:229)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter ([| #])

  Thank you

  Federico

  Hello Dario,

  the solution to the problem really seems to check 'non transactional connections' (with nothing to do in the code of the application) in the GlassFish connection pool configuration.

  I did a lot of tests: commit, rollback and save points works like movement.

  See you later for another thrilling adventure!

  Thank you

  Federico

• Could not resolve an error in the component implementation

  I use the http://www.quietlyscheming.com/blog/2007/01/23/some-thoughts-on-doubt-on-flex-as-the-best-option-orhow-i-made-my-flex-images-stop-dancing/ SuperImage component
  
  The problem I have is that when I try to use this component in a TileList ItemRenderer, I get the error could not resolve < qs: SuperImage > to an implementation of the component.
  
  In the tag of my Application, I use xmlns:qs = "' qs.controls. *" which allows me to use the SuperImage component anywhere else, but the error occurs when I use it in one component. "
  
  I have searched for an answer but couldn't find something that worked. Can someone help me understand what the problem is? Here is the code where the error occurs.
  
  < mx:TileList >
  < mx:itemRenderer >
  < mx:Component >
  < mx:VBox >
  < qs: SuperImage / >
  < mx:Label / >
  < / mx:VBox >
  < / mx:Component >
  < / mx:itemRenderer >
  < / mx:TileList >
  
  Thanks for any help.

  I was able to understand the problem.

  I had to add the xmlns to the item as well as the application. The documentation does not say that it is a valid property, but it works.

  Thanks again for your help.

• Access denied error when the output directly in a shared folder in Windows 7

  I have two workstations, the first working (PC1) of Windows Server 2008 R2 and the other work (PC2) of Windows 7 Professional.

  I work on PC1 using the app called "MetaDimention" dealing with PDF files and generates output files as a separation of colors (CMYK color separation) TIFF files. The problem arises when I intend to exit that TIFF files generated by "MetaDimention" directly in the shared folder on the PC2 via the network "workgroup."

  The 'MetaDimention' gives me the error message: JobTicketMerger: the data output destination '\\EQCENTER1\TiffOut' is not valid (ERROR_ACCESS_DENIED).

  where "\\EQCENTER1\TiffOut" is the path to the folder shared network on PC2.

  I noticed this problem when I using Windows 7 and Windows Server 2008, 2012 as an output destination, but there is no problem when the destination using windows server 2003 path.

  I tried to Google the error message generated by the Application of MetaDimention and I found this thread on the other forum:

  MetaDimension output error - problem

  I have the same problem exactly as mentioned, it has, after several positions the person who asked about the problem, he said that he had found the solution by changing some services started as LocalAccount user! but I do not understand what it does exactly. and here's the quote from his original message: "solved!" some services started as LocalAccount, replaced by the user and all ok.

  Please tell me what can I do to solve this problem in some detail.

  Thank you

  Hi Dia,.

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• AnyConnect Cert warning error when the xml file is changed.

  Hello world

  We have valid CA cert and it is installed successfully on the ASA ASA associate outside the interface.

  When you use ipsec IKeV2 with any connection pre deployment anyconnect when I change the anyconnect on ASA and user profile

  connects the first time, he gets the warning below

  Untrusted security VPN server certificate warning

  The options are

  Connect anyway cancel connection

  I click on connect anyway and anyconnect is connected.

  Checked that CN has the FQDN value.

  We do not use SSL certificate.

  When I connect the second time above cert error warning do not come.

  This warning cert error only comes when the changes are made to the anyconnect profile and the user connects again to the AAS.

  We do not use cert based authentic.

  Any ideas how I can fix this problem?

  Concerning

  MAhesh

  You can remove and reinstall the certificate authority. It will require that first delete you the configured services dependent thereon, binding to the interface etc..

  I am not convinced that would fix what you see, and it would not be my first choice.

  First, I would check things like why don't not the client approves the certificate (audit for example simply by accessing the interface of the ASA and see what your browser indicates that the question (both Firefox and Chrome are very useful in telling you of any problem with the certificate if you expand the details), what is the content of the profile and changes) the etc.

  You can open a TAC case?

• 404 error when the lowest selection (column name) for the metadata 11 g dictionary

  
  Hi all

  I get a 404 error when I select a column name and click the link for dictionary of metadata. I get the 404 because obiee is allowing more 179 characters for the web link. You do not get a 404 error if you click on one of the shorter column names.

  When you select the number of offices with commands and then click the metadata dictionary button you get the error 404 below and the web address is truncated causing the 404

  This is the product link

  http / / self/analyticsRes/SampleAppLite_BI0024/SubjectArea/PRCAT_Sample_Sales_Lite80cb6a2e /.

  PRT_Calculated_Facts80cb6aa9/PRC_N_of_Offices_with_Or80cb6cfb.x

  If you type the ml at the end, you can see the Web page you want. Also if you click on the area in question and then click the dictionary of metadata and access the column from here the link works.

  
  

  

  We receive this error in our Dictionary of metadata generated, but I can also reproduce the problem with the sample app, we have placed the dictionary in the folder anlyticsRes.

  I just wanted to check to see if someone else has this problem.

  Thanks in advance!

  S. Clark

  I opened a SR and a bug has already been reported, and the solution is in the latest patch.

  Solution

  The fix for the Bug 17449036

  is included in the bundle 20124371 Patch (patch bundle 11.1.1.7.150120). See this note for more information:

  Note 1488475.1: OBIEE 11 g: required and recommended patches and Patch Sets

  There is also a one-off Patch 17449036 on top of previous patch bundle for different platforms.
  It is advisable to be in the latest patch bundle. In this case, you prefer to apply exceptional measures, you can do but
  It is not for all platforms and all the patches together.

• ORA-12545 error when the connection to the remote server

  Hello

  Env: Oracle 11 2 Client (11.2.0.1) on Oracle Linux 5.8 GR 64 bit

  DB server: Oracle 11 g 2 (11.2.0.3.6) on Oracle Linux 6.2 64bits

  I have installed Oracle 11 GR 2 client on a server and created the tnsnames.ora with required entry.

  When I try to connect to the databases on the server of remote database using the suite in two ways, one of them give me error "ORA-12545". Do not know why.

  [oracle@server ~] $ sqlplus scott/tiger@proddb01

  SQL * more: Production of release 11.2.0.1.0 game Apr 10 12:24:58 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  [oracle@server ~] $ sqlplus

  SQL * more: Production of release 11.2.0.1.0 game Apr 10 12:25:04 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Enter the user name: scott

  Enter the password:

  ERROR:

  ORA-12545: Connect failed because target host or object does not exist

  Enter the user name:

  Here's my env:

  [oracle@server ~] $ echo $ORACLE_SID

  PRODRD01

  [oracle@server ~] $ echo $ORACLE_HOME

  /opt/Oracle/app/product/11.2.0/Client_1

  [oracle@server ~] $

  Input TNS is:

  PRODRD01 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = server.whatever.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = PRODRD01)

  )

  )

  I tried to replace the host name and IP address, I still got the same error. The host name of the server database and IP entry does not exist in the file "/ etc/hosts. Could this be the cause? I can't edit the file "/ etc/hosts" and I couldn't convince the sys-admin to add the hostname of Server DB and IP entry to this file.

  Clues please?

  Best regards

  user130038 wrote:

  Hello

  Env: Oracle 11 2 Client (11.2.0.1) on Oracle Linux 5.8 GR 64 bit

  DB server: Oracle 11 g 2 (11.2.0.3.6) on Oracle Linux 6.2 64bits

  I have installed Oracle 11 GR 2 client on a server and created the tnsnames.ora with required entry.

  When I try to connect to the databases on the server of remote database using the suite in two ways, one of them give me error "ORA-12545". Do not know why.

  [oracle@server ~] $ sqlplus scott/tiger@proddb01

  SQL * more: Production of release 11.2.0.1.0 game Apr 10 12:24:58 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > exit

  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  [oracle@server ~] $ sqlplus

  SQL * more: Production of release 11.2.0.1.0 game Apr 10 12:25:04 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Enter the user name: scott

  Enter the password:

  ERROR:

  ORA-12545: Connect failed because target host or object does not exist

  Enter the user name:

  Here's my env:

  [oracle@server ~] $ echo $ORACLE_SID

  PRODRD01

  [oracle@server ~] $ echo $ORACLE_HOME

  /opt/Oracle/app/product/11.2.0/Client_1

  [oracle@server ~] $

  Input TNS is:

  PRODRD01 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = server.whatever.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = PRODRD01)

  )

  )

  I tried to replace the host name and IP address, I still got the same error. The host name of the server database and IP entry does not exist in the file "/ etc/hosts. Could this be the cause? I can't edit the file "/ etc/hosts" and I couldn't convince the sys-admin to add the hostname of Server DB and IP entry to this file.

  Clues please?

  Best regards

  When '@proddb01' is not used, then sqlplus can only connect to a local database, & there is no local database on the client system

• problem with adf table when the component is added in the column of the table.

  Hi all
  
  I use jdev 11.1.1.5.0 version.
  
  use case: I created an adf table that is based on the original Version. DC now I added a component of group select a radio (which contain 4 approved, rejected, radio button back, no) in the table of the adf.
  I have table with many rows for example in the first row select approved and the next row I select reject now when I get the value of a radio button group in backing bean by using the component binding I had the last selected value. (in this case to reject).
  
  And the second is that when I set the value for the current by using binding as line radio button
  
  rb.setValue("R") then reject option selected for all lines.
  
  so my question is--
  
  How can I get and set the value of the group to select a radio at the level of the line using the element binding.

  Hello

  I don't see a reason to not use a transitional attribute for the radioGroup in your previous answer.

  Here's the example I tried.

  Where DeptnoRadio is the transitional attribute, I created (which will be a few random values between A and E) and EnableDisable is another temporary variable of type Boolean that returns true or false depending on certain conditions.

  Now, for each row, the value is different (and the corresponding radio button is selected) and thereafter, which match the condition, the option is disabled.

  Arun-

• 403 error when the customer clicks on the download buttons

  Customer wrote the download buttons on the page of tips of penhart.businesscatalyst.com take him to a 403 error screen when she tried to test downloads. She has. I also had another test with IE and same 403 error has occurred. I work on a Mac and using Firefox. Works fine on my end... Hmmmmmmm?

  Means an error 403 "forbidden". You must enable the public access to the directory dropbox of PDF files (that you wish to consult with Dropbox, if possible).

  I see the same error when I try to download from your site as well. The version of the browser or operating system is not relevant here. You do not receive an error because you have full access to files... considering that neither myself, your clients or the public can visit to download PDF files:

  

• JavaScript error when the special opening

  It happened twice all in task of opening in the workspace: 'expected hexadecimal digit.

  Sniff the communication between the client and the server to LC revealed that the URL should point to a temporary server file contains the server path:

  C:\LCGDS\doc17987987

  first '-' since this is way not analyzable URL together by EI - where the above javascript error.

  LCGDS is the Global document storage directory that is, at this stage, local to the LC Server.

  It is not possible to repeat the isssue or connect it to the specific document, user or workstation.

  We have LC ES2 with the latest SP and configuration of single server (without clusters).

  What should do?

  Don't think it would be on SS2, but this is a bug, you should contact technical support to get a patch so that it is.

  The url must end with the file name of the path part (for example usually something like expenses.pdf) and not including any previous drive: / path path/info).  The bug is that when the full path of the file name contains the backslashes, the analysis did not work.

  The file name is taken from the name attribute of the Document provided for the service rendered.  This case could occur if you use a variable document in your process. As a solution, you can temporarily modify the process to remove the attribute file name variable doc containing the form before being used in a step of user.  (use setvalue with Document function setDocAttribute (docvarname, "fileName", ""-Note that this returns the document updated so easy to use in a setvalue).)

  I do not recommend trying to modify the workspace for this problem.

• Errors when the Participant leaves the room

  I have the following two errors when a user leaves/close the browser session. I think the first one is for the person leaving and the second is for the person who left.

  Is it possible to intercept these errors and prevent them from happening?

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at com.adobe.rtc.messaging.manager::MessageManager/onUserRemove() [C:\work\main\connect\cocom o\src\com\adobe\rtc\messaging\manager\MessageManager.as:745]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at com.adobe.rtc.sharedManagers::UserManager/userRemoved() [C:\work\main\connect\cocomo\src\c om\adobe\rtc\sharedManagers\UserManager.as:1056]
  at com.adobe.rtc.sharedManagers::UserManager/onItemRetract() [C:\work\main\connect\cocomo\src \com\adobe\rtc\sharedManagers\UserManager.as:957]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at com.adobe.rtc.sharedModel::CollectionNode/ http://www.Adobe.com/2006/connect/COCOMO/messaging/internal:receiveItemRetraction ([C:\wo rk\main\connect\cocomo\src\com\adobe\rtc\sharedModel\CollectionNode.as:755])
  at com.adobe.rtc.messaging.manager::MessageManager/ http://www.Adobe.com/2006/connect/COCOMO/messaging/internal:receiveItemRetraction ([C:\wo rk\main\connect\cocomo\src\com\adobe\rtc\messaging\manager\MessageManager.as:679])
  at com.adobe.rtc.session.managers::SessionManagerBase/receiveItemRetraction() [C:\work\main\c onnect\cocomo\src\com\adobe\rtc\session\managers\SessionManagerBase.as:341]

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at com.adobe.rtc.pods::SimpleChat/onUserRemove() [C:\work\main\connect\cocomo\src\com\adobe\r tc\pods\SimpleChat.as:693]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at com.adobe.rtc.sharedManagers::UserManager/userRemoved() [C:\work\main\connect\cocomo\src\c om\adobe\rtc\sharedManagers\UserManager.as:1056]
  at com.adobe.rtc.sharedManagers::UserManager/onItemRetract() [C:\work\main\connect\cocomo\src \com\adobe\rtc\sharedManagers\UserManager.as:957]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at com.adobe.rtc.sharedModel::CollectionNode/ http://www.Adobe.com/2006/connect/COCOMO/messaging/internal:receiveItemRetraction ([C:\wo rk\main\connect\cocomo\src\com\adobe\rtc\sharedModel\CollectionNode.as:755])
  at com.adobe.rtc.messaging.manager::MessageManager/ http://www.Adobe.com/2006/connect/COCOMO/messaging/internal:receiveItemRetraction ([C:\wo rk\main\connect\cocomo\src\com\adobe\rtc\messaging\manager\MessageManager.as:679])
  at com.adobe.rtc.session.managers::SessionManagerBase/receiveItemRetraction() [C:\work\main\c onnect\cocomo\src\com\adobe\rtc\session\managers\SessionManagerBase.as:341]

  Hello

  Why do you need to use the same instance of authentication for each connectsession. I think you should use separate authenticators to authenticate and start a session. Looking at the behavioral example sampleApps folder.

  Once you have a connectsession, you can use it for the various components out of session containers.

  I hope this helps.

  Thank you

  Hironmay Basu