Essbase in MSCS Cluster (metadata and data load failures)

Similar Questions

• R12: Copy a group of companies with configurations, metadata and data in the same instance of OA

  The idea was born to a very common condition between the companies IT. pre-sales and pro-ventes groups do various tasks, including the response of the RPF/RFI, PoC, building, Solution architecture, customer demo etc. Ususally they do not have the dedicated application instances, or rather they do not find a sufficient number of cases of applications dedicated to deep study of the road. Every other day a group cries out for an Apps instance and the same gets lift for senior management in short time. It gives a lot of pain to the infrastructure/DBA groups because they fail to meet people like them, due to the limited availability of free nodes, resources, networks and space etc.
  
  I have a Vision of the R12.1.3 (tell SID = VIS1213) installed on a Linux machine. The box is quite busy with his hearts limited, showing little free memory and the attached SAN has insufficient free space remaining. A group of Oracle Apps pre-sales consultants, says "Group 1", is the use of this.»
  
  Now the 3 other groups are asking for a R12.1.3 Vision instance separately for different reasons below. Each of them wants the instance again and do not share with others.
  
  Group 2 for deep study of the road against a critical response to RFP
  Group-3 for the development of a point of contact for a customer demo
  Group 4 for the manufacture of PUK media on some business processes
  
  In this scenario, I should install 3 distinct Vision of R12.1.3 (using CDs or downloaded zip) or clone VIS1213 in 3 different places with different SIDS, possibly on one or more separated nodes (as above Linux node has insufficient free resources). In this case, the need for available server resources and disk space multiplied by 3, so that DBA maintenance for these 3 new instances is added.
  
  Hope that I have clear air up to this point.
  
  Then I was thinking if we have "virtual instances" within an existing instance of Apps, by copying from a vertain org level. First I thought I'd take THE level, but it will not work if an instance of group to work with HRMS claims. We must therefore take business group level. After that we will create the appropriate role and responsibility, user profile options so that the new user can see and work on the new BG and data area down only. It will be like a separate instance to use.
  Benefits of my desired task will be
  
  -no separate server resource, the required network
  -no additional DBA not involved maintenance
  -no separate required backup plan
  
  So here it is to create 3 new "virtual instances" right within the same instance of VIS1213. New groups will have same URL, same existing TNS details but 3 credentials different existing access. Each of them would be limited in a way so that they can not see each and other data and can not hurt each and other changes.
  
  This can be achieved if we can copy an existing group of its activities with org structures, metadata and data, within the same instance. Oralce planning cannot be copied within the same instance configurations.
  
  What I've done so far was I manually created a new BG, attached an existing sobbing (CoA, Agenda / currency), created a new, copied and modified accounting structure flexfields before fixing, created the new ORGANIZATIONAL unit, and then a new InvOrg of master and a new InvOrg clild, defined the profile MO some GL and HR profiles. Then I extracted finished master and data assignment article category Masters against a master/child existing InvOrg, updated the data for newly created InvOrgs, inserted into tables insterface and ran seeded import conc program element. Except for a few, all data have been loaded into base against new InvOrgs tables.
  
  Then I tried with master provider (with sites and contacts). A few AP configurations are required, and then data provider (+ contact + site) have been loaded against OR newly created (under new BG) base tables.
  
  I do not proceed after that. I'm currently looking for ideas from the experts on how to go further.
  
  Planning is able to create this kind of 'virtual instance' within the same instance of OSTEOARTHRITIS?
  
  PL nowadays return.
  
  Thank you and best regards,
  Castelbajac Dhara
  E-mail: [email protected]

  PL don't post duplicate topics - R12: copy a group of companies with org, configurations, metadata & data structures

• Failures of loading data into Essbase Clusters (MSCS)

  Hello

  Is there a power failure on the active node of the Cluster Essbase (call this node A) and the Cube needs to be rebuilt on the node of Cluster B, how the Cube will be rebuilt on Cluster Node B.

  What will orchestrate the activities required in order to rebuild the Cube)? Both Essbase nodes are mounted on Microsoft cluster Services.

  In essence, I want to know

  (A) Comment do to handle the load of metadata that failed on Node1 to Node2 Essbase?

  (B) makes the continuous session to run meta-data / load on the Second knot, Essbase data when the first node of Essbase fails?

  Thank you for your help in advance.

  Kind regards

  UB.

  It would be built the same way that you use either the Essbase NOMCLUSTER or the VIP MSCS is used for configuring the Essbase cluster, you would not ever refer to a host name then it does matter not what node it will run on.

  The session will be lost on tipping as is the same as the restart of the essbase.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• ODI - SQL for Hyperion Essbase data loading

  Hello

  We have created a 'vision' in SQL Server that contains our data.  The view currently has every year and periods of Jan 2011 to present.  Each period is about 300 000 records.  I want to only load one period at a time.  For example may 2013.  Currently we use ODBC through a rule of data loading, but the customer wants to use ODI to be compatible with the versions of dimension metadata.  Here's the SQL on the view that works very well.   Is there a way I can run this SQL in the ODI Interface so it pulls only what I declare in the Where clause?  If yes where can I do it?

  Select

  CATEGORY, YEAR, LOCATION, SCRIPT, DEPT, PROJECT, EXPCODE, TIME, ACCOUNT, AMOUNT

  Of

  PS_LHI_HYP_PRJ_ACT

  Where

  YEAR > = "2013" AND PERIOD = 'MAY '.

  ORDER BY CATEGORY ASC ASC FISCAL_YEAR, LOCATION ASC, ASC, ASC, ASC, ASC, PERIOD EXPCODE PROJECT DEPT SCENARIO CSA ACCOUNT CSA;

  Hello

  Simply use the following KM to load data - IKM SQL for Hyperion Essbase (DATA) - in an ODI interface that has the view that you created the Source model. You can add filters to the source which are dynamically by ODI variables to create the Where clause based on the month and year. Make sure you only specify a rule of load method to load the data into the KM

• Essbase EAS data vs ODI Essbase data load, which is the fastest?

  To load the data (no metadata) of flat file for Essbase, we have 2 ways, we're ODI, one is data load EAS, which is faster for loading data?

  Hello

  If you use the method of rule no load in ODI EAS will be faster.
  If you have ODI patched to 10.1.3.5.2_02 or newer (I recommend you be on the latest patches) and the use of the method of rule load then the speed should be similar to EA that it uses the same way of loading data.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Forcing errors when loading essbase nonleaf data loading

  Hi all

  I was wondering if anyone had experience forcing data load errors when loadrules is trying to push the nonleaf members data in an essbase cube.

  I obviously ETL level to prevent members to achieve State of charge which are no sheet of error handling, but I would however like the management of the additional errors (so not only fix the errors).

  ID much prefer errors to be rejected and shown in the log, rather than being crushed by aggregation in the background

  Have you tried to create a security filter for the user used by the load that allows only write at level 0 and not greater access?

• Data loading 10415 failed when you export data to Essbase EPMA app

  Hi Experts,

  Can someone help me solve this issue I am facing FDM 11.1.2.3

  I'm trying to export data to the application Essbase EPMA of FDM

  import and validate worked fine, but when I click on export its failure

  I am getting below error

  Failed to load data

  10415 - data loading errors

  Proceedings of Essbase API: [EssImport] threw code: 1003029 - 1003029

  Encountered in the spreadsheet file (C:\Oracle\Middleware\User_Projects\epmsystem1\EssbaseServer\essbaseserver1\app\Volv formatting

  I have Diemsion members

  1 account

  2 entity

  3 scenario

  4 year

  5. period

  6 regions

  7 products

  8 acquisitions

  9 Servicesline

  10 Functionalunit

  When I click on the button export its failure

  I checked 1 thing more inception. DAT file but this file is empty

  Thanks in advance

  Hello

  Even I was facing the similar problem

  In my case I am loading data to the Application of conventional planning. When all the dimension members are ignored in the mapping for the combination, you try to load the data, and when you click Export, you will get the same message. . DAT empty file is created

  You can check this

  Thank you

  Praveen

• Convert a table 1 d of the Cluster (time + data) in 2D-table time and data. How?

  Hello

  is there a simple way to convert a large table 1 d of the Cluster (containing a timestamp and a given) in a table 2D with time stamp and data?

  I could index the table in a while loop, separate each item and put the timestamps and the data in a new table.

  The format of the new table could be an array of double (then the timestamp must be converted to a double) or an array of strings.

  Could I do this without a loop?

  Johannes

  LabVIEW 7.1 (!)

  Hi Johannes,

  If it is possible to manage your time as dbl-floats stamps, I suggest using a simple loop and the cluster to function array (Cluster_to_Array_Mod1.vi).

  If you want to stay with time stamp data type, even once use a loop for a cluster unbundle and build the function array (cluster_to_array_Mod2.vi).

  Kind regards

  Thomas

• Ignore the ASO - zero data loads and missing values

  Hello

  There is an option that ignores the zero values & the missing values in the dialog box when loading data in cube ASO interactively via EAS.

  Y at - it an option to specify the same in the MAXL Import data command? I couldn't find a technical reference.

  I have 12 months in the columns in the data flow. At least 1/4 of my data is zeros. Ignoring zeros keeps the size of the cube small and faster.

  We are on 11.1.2.2.

  Appreciate your thoughts.

  Thank you

  Ethan.

  The thing is that it's hidden in the command Alter Database (Aggregate Storage) , when you create the data loading buffer.  If you are not sure what a buffer for loading data, see loading data using pads.

• Script of VM inventory for VM name with the location, the name of the Cluster and data storing total size and free space left in DS.

  Hello

  I wanted to collect script inventory VM VM name with location, name of the Cluster and data store total size and free space left in Datastore.I have script but his mistake of shows during its execution. Any help on this will be apreciated.

  Thank you

  VMG

  Error: -.

  Get-view: could not validate the argument on the parameter "VIObject". The argument is null or empty. Provide an argument that is not null or empty, and then try
  the command again.
  E:\script\VM-DS-cluster.ps1:7 tank: 20
  + $esx = get-view < < < < $vm. Runtime.Host - name of the Parent property
  + CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingValidationException)
  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIView

  Get-view: could not validate the argument on the parameter "VIObject". The argument is null or empty. Provide an argument that is not null or empty, and then try
  the command again.
  E:\script\VM-DS-cluster.ps1:8 tank: 24
  + $cluster = get-view < < < < $esx. Parent - the name of the property
  + CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingValidationException)
  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIView

  Get-view: could not validate the argument on the parameter "VIObject". The argument is null or empty. Provide an argument that is not null or empty, and then try
  the command again.
  E:\script\VM-DS-cluster.ps1:9 tank: 24
  + += get-view $report < < < < $vm. Store data-name of the property, summary |
  + CategoryInfo: InvalidData: (:)) [Get-view], ParameterBindingValidationException)
  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutomation.ViCore.Cmdlets.Commands.DotNetInterop.GetVIView

  It seems that your copy/paste lost some.

  I have attached the script

• What LKM and IKM for b/w MSSQL 2005 and Oracle 11 of fast data loading

  Hello
  
  Can anyone help to decide what LKMs and IKMs are best for data loading between MSSQL and Oracle.
  
  Staging area is Oracle. Need to load around the lines of 400Million of MSSQL to Oracle 11 g.
  
  Best regards
  Muhammad

  "LKM MSSQL to ORACLE (BCP SQLLDR)" may be useful in your case which uses BCP and SQLLDR to extract and laod of MSSQL and Oracle database.

  Please see details on KMs to the http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/ms_sqlserver.htm#BGBJBGCC

• Diff data loading while doing through SQL and while doing through text file

  I have an ASO cube data charges every day morning. Loading the data is automated by MaxL and this MaxL files uses a SQL (against teradata) as the source of data and a State of charge for loading data. 1 week incorrect data return has begun to show upward and nothing has been changed. It's strange when I run the SQL in a teradata assistant and copy the results to a text file and load the data via EAS from the text data source file and the same rule that data file appears on the right. Any ideas on why this is happening. So basically when I use a SQL data source and a particular rule file data seems to be missing, where as during the use of the results of the same SQL copied into a text file and load data into the text file and the same rule file it seems to work. I'm on 11.1.1.4 and in this case only a private citizen of the cube.
  
  Thank you
  Ted.

  Hi Ted, thanks.

  Well, you reset the database before each load that takes the properties 'Overwrite' or 'Add' of the equation which is good. And it looks like nothing of going with several buffers (no parallel loading SQL, right?). That really just leaves box "Aggregate use Last" - did you happen to check this? By default applied your MaxL charge would be "Aggregation Sum" (which is the equivalent of not check "Use Last Aggregate").

  A_defaut, I would suggest that you add a WHERE clause of your SQL query to zoom right down to one of your 'problem' values (you have not really described what you see error data) and a) load just this intersection and b) see the result of the query in the data prep Editor.

• Moving Cluster to new data center and move ASM Lun

  Hello
  
  My question is for an upcoming project. We want to grow our three existing node on our other data Center cluster. Servers will be moved and would re - ip, but Oracle, CRS and ASM houses remain intact.
  
  We have our ASM on EMC Clariion disks. The idea is to use EMC Replication Manager to replicate the LUNS on EMC Clarion in the other data center and to present them to the cluster.
  
  My question is if it looks like a valid plan, or I think to simplistic?
  
  Will keep it even replicated LUN the ASM disk identity and data in order to be recognized and available in start?
  
  In addition, in order to minimize downtime, we want to move a single node of the cluster first, then others do appear later.
  
  Thanks for your opinions.

  Linux-RAC-Admin wrote:
  My question is for an upcoming project. We want to grow our three existing node on our other data Center cluster. Servers will be moved and would re - ip, but Oracle, CRS and ASM houses remain intact.

  We have our ASM on EMC Clariion disks. The idea is to use EMC Replication Manager to replicate the LUNS on EMC Clarion in the other data center and to present them to the cluster.

  My question is if it looks like a valid plan, or I think to simplistic?

  Will keep it even replicated LUN the ASM disk identity and data in order to be recognized and available in start?

  Hello

  To replicate ASMDISK success, all databases in the Diskgroup must be down or in backup mode.
  Replication starts with the online database (IE database in backup mode hot) needs attention, because all data/redo/controlfile files will be copied in use (i.e. corrupt), be necessary will perform database recovery.

  I think that you already have this doc, but I write anyway.
  http://www.EMC.com/collateral/hardware/white-papers/h2104-EMC-CLARiiON-DB-Stor-Sol-Oracle-10G-Oracle-11g-CLARiiON-Stor-repltn-WP.PDF
  >

  In addition, in order to minimize downtime, we want to move a single node of the cluster first, then others do appear later.

  The plan seems good.
  Build a step by step mapping all changes and good luck.

  Kind regards
  Levi Pereira

• Load the metadata and extract the metadata tasks EPMA hfm App not appearning

  Hello
  
  I have deployemed an application of hfm in EPMA.
  But the options load metadata and extract metadata does not appear under load task and extracted.
  Version of EPMA is 9.3.1.3.
  Is this a limitation with this version of EPMA or I made a mistake during the installation.
  The user has all privileges for this app.
  
  Help, please.

  Once you create an application in EPMA these options are no longer available.

  They are only available for Classic applications.

  See page 121 of the Administrator's guide.

  http://download.Oracle.com/docs/CD/E12825_01/EPM.111/hfm_admin.PDF

• Newbie sorry data-load question and datafile / viral measure

  Hi guys
  
  Sorry disturbing you - but I did a lot of reading and am still confused.
  
  I was asked to create a new tablespace:
  
  create tablespace xyz datafile 'oradata/corpdata/xyz.dbf' size 2048M extent management local size unique 1023M;
  
  alter tablespace xyz add datafile ' / oradata/corpdata/xyz.dbf' size 2048M;
  
  Despite being worried not given information about the data to load or why the tablespace must be sized that way - I was told to just 'do it '.
  
  Someone tried to load data - and there was a message in the alerts log.
  
  ORA-1652: unable to extend temp by 65472 segment in tablespace xyz
  
  We do not use autoextend on data files even if the person loading the data would be so (they are new on the environment).
  
  The database is on a cold backup nightly routine - we are in a rock anvil - we have no space on the server - to make RMAN and only 10 G left on the Strip for (Veritas) backup routine and thus control space with no autoextend management.
  
  As far as I know of the above error message is that the storage space is not large enough to hold the load data - but I was told by the person who imports the data they have it correctly dimensioned and it something I did when the database create order (although I have cut and pasted from their instructions - and I adapted to our environment - Windows 2003 SP2 but 32 bits).
  
  The person called to say I had messed up their data loading and was about to make me their manager for failing to do my job - and they did and my line manager said that I failed to correctly create the tablespace.
  
  When this person was asked to create the tablespace I asked why they thought that extensions should be 1023M and said it was a large data load that must be inserted to a certain extent.
  
  That sounds good... but I'm confused.
  
  1023M is very much - this means that you have only four extents in the tablespace until it reaches capacity.
  
  It is a load - is GIS data - I have not participated in the previous data loads GIS - other than monitor and change of tablespaces to support - and previous people have size it right - and I've never had no return. Guess I'm a bit lazy - just did as they asked.
  
  However, they never used 128K as a size measure never 1023M.
  
  Can I ask is 1023 M normal for large data loads - or I'm just the question - it seems excessive unless you really just a table and an index of 1023M?
  
  Thanks for any idea or other research.

  Assuming a block size of 8 KB, 65472 would be 511 MB. However, as it is a GIS database, my guess is that the database block size itself has been set to 16K, then 65472 is 1023MB.

  What load data is done? Oracle Export dump? Which includes a CREATE INDEX statement?
  Export-Import is a CREATE TABLE and INSERT so that you would get an ORA-1652 on it. So you get ORA-1652 if the array is created.
  However, you will get an ORA-1652 on an INDEX to CREATE the target segment (ie the Index) for this operation is initially created as a 'temporary' segment until the Index build is complete when it switches to be a 'temporary' to be a segment of "index".

  Also, if parallelism is used, each parallel operation would attempt to assign degrees of 1023 MB. Therefore, even if the final index target should have been only, say 512 MB, a CREATE INDEX with a DEGREE of 4 would begin with 4 extensions of 1023 MB each and would not decrease to less than that!

  A measure of 1023 MB size is, in my opinion, very bad. My guess is that they came up with an estimate of the size of the table and thought that the table should be inserted in 1 measure and, therefore, specified 1023 MB in the script that is provided to you. And it is wrong.

  Same Oracle AUTOALLOCATE goes only up to 64 MB extended when a Segment reached the mark of 1 GB.