Similar Questions

• Exception ESynapseError in module ezGameXN.dll at 000CDF57. How can I solve this problem?

  Whenever I turn on my laptop I get this error message: Exception ESynapseError in module ezGameXN.dll at 000CDF57. In addition, every time I try to go on the internet its good for about half an hour and then everything just slows down and the only thing I can do is to shut down my computer.

  Help, please
  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  I hope this helps.  Good luck.

• Anyone know what means this error and how to fix it? GIFexception of exception in the module aviwusb54gc.dll to 000252af

  I get this error message and you can get up to 200 of them.  It is so boring.  Any help would be greatly appreciated.

  GIFexception of exception in the module aviwusb54gc.dll to 000252af

  Hi yioryianna,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have validated, Exceptional GIFexception in module aviwusb54gc.dll to AI 000252af,related to the Linksys WLAN monitor. Your question will be better answered by contacting Linksys Support.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message when starting my PC: exceptional EFOpenError in the module aviWMP54Gv4.dll to 0000DB5F

  Hello world

  My WIndows XP home PC has an error - Application error Exception EFOpenError in module aviWMP54Gv4.dll at 0000DB5F.  What can I do about it?  Any help is greatly appreciated.
  Thank you
  Gemma.

  Re-install the latest driver Linksys

• When closing Firefox 13.01 I always get this pop-up: Exception EAccessViolation in module ntdll.dll to 000222 B 2. Access violation at address 77BF22B2 in module

  When closing Firefox 13.01 I always get this popup:
  Exception EAccessViolation in module ntdll.dll to 000222B 2. Access violation at address 77BF22B2 in module 'ntdll.dll '. Writing of
  address 00000008.
  With previous versions of FF it never happened.
  Any solution?

  Hello

  Please check if this happens in a new profile. If the new profile is correct, you can then reset Firefox on the old (previous) profile via the help (Alt + H) > troubleshooting information.

• Exception in the module coinwatcher.exe ECovertError

  Hi, I installed coinwatcher futurelogic Corp. application in my Win 7 pro. After reboot, program error invites you to say, EConvertError Exception in the coinwatcher.exe module to 0000827. "is a valid integer. Application will not work more except if it will be reinstalled, but then again, after restarting the PC, same program error will occur. Help, please.

  Hello Amancio,

  Where did you install the software from coinwatcher.exe?

  I suggest you to install in compatibility mode coinwatcher.exe.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, then I suggest you to contact the support of the logic of the future.

  http://www.futurelogic-Inc.com/

  I hope this helps!

• 775de753 of the module ntdll.dll access violation

  I am getting access violation 775de753 in module ntdll.dll which I can't very well what the problem is with the software. can someone help me in this reregard?

  Hello

  1. have there been recent changes to the system before the show?

  2. when exactly do you have this problem?

  3. What is the exact error message?

  4 are. what software you referring?

  Please provide more information on the issue to help you best.

  For more information, please visit: http://social.msdn.microsoft.com/forums/en-US/ieextensiondevelopment/thread/5ab972c4-8924-4214-a314-e60080972b05/

• Class cast exception between the modules of the child

  Hi people,

  I am new to Flex and ActionScript. I would like to make the following use cases:

  Context:

  -          2 modules with navigator Tab.

  -          1 main application without navigator Tab.

  Scenario:

  1.       I load my first module of the child with the following commands:

  var moduleInfo:IModuleInfo = ModuleManager.getModule (path2PresentationModule);

  moduleInfo.load (new ApplicationDomain (ApplicationDomain.currentDomain), null, null, _moduleFactory);

  2.       On the module ready event I view tab within the child module 1

  3.       I load my second module of the child with the following command:

  var moduleInfo:IModuleInfo = ModuleManager.getModule (path2PresentationModule);

  moduleInfo.load (new ApplicationDomain (ApplicationDomain.currentDomain), null, null, _moduleFactory);

  4.       On the module ready event I view tab within the child module 2

  5.       Then it crash with the following error stack:

  Error stack:

  TypeError: Error #1034: Type coercion failed: cannot convert mx.managers::HistoryManagerImpl@4d004e1 to mx.managers.IHistoryManager.

  to mx.managers::HistoryManager$ /get impl()

  at mx.managers::HistoryManager$/register()

  at mx.containers::ViewStack/commitProperties()

  at mx.containers::TabNavigator/commitProperties()

  at mx.core::UIComponent/validateProperties() [E:\dev\4.5.1\frameworks\projects\framework\src\ mx\core\UIComponent.as:8209]

  at mx.managers::LayoutManager/validateProperties() [E:\dev\4.5.1\frameworks\projects\framewor k\src\mx\managers\LayoutManager.as:597]

  at mx.managers::LayoutManager/doPhasedInstantiation() [E:\dev\4.5.1\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:813]

  at mx.managers::LayoutManager/doPhasedInstantiationCallback() [E:\dev\4.5.1\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1180]

  You have an idea to save me!

  Thank you

  Roman.

  Bind the HistoryManager in the main application.

• How to throw the exception in the Module of the Application

  Hello

  Jdev Version 12.1.3

  I have the custom in the request Module method that is exposed as a Client Interface. It is added as a button to the page.

  If I need to throw and exception in this method, how do I do that. Could you please give me a code example?

  See you soon

  AJ

  Hello

  Try this

    public void methodInAppModuleImpl()
    {
      throw new oracle.jbo.JboException("error message");
    }
  

• Access violation at address 59 * 963 in the module 'SMM.dll '. Read address 00000004

  Hello

  I get this error when you try to start the Migration of data from Samsung.

  I tried to start in safe mode, the same error.

  Also run a sfc/scannow found no errors.

  I also tried to run the program as an administrator, no luck.

  The address change slightly (*) 59 * 963 every time.

  What should I do?

  

  EDIT: Change address

  I found the solution.

  WARNING: This isn't a very good, and it could cause data loss. Use it at your own risk.

  Just go to the folder were Samsung migrating data stored and cut the SSM.dll.

  Then, run the program and paste them again.
  Successfully, I cloned my drive and found no errors with chkdsk or sfc/scannow.

  Works so far :-)

  Still don't know how to uninstall the program, but that's another issue...

• eroexcetion of exception in the module greg.exe to 001cd90c

  In Spanish, please.

  Hello Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below: http://support.Microsoft.com/common/international.aspx Thank you

• Player will not start. Message "file error EMM in the Module tbhookin.dll to 0001FA77.

  Then... "Error creating memory mapped file 5."

  Just addicts with a window open and empty that can not close the Task Manager.

  Player 11.0.03

  Win 7 32 bit

  Thank you!

  My original installation of Taskbar Shuffle was in 2008. Apparently, it was the origin of the problem (and not with IE 10, which works very well). Only, it was obvious in my trying to use Adobe Reader XI.

• Collage error: runtime error. Error: access violation, address of the error: 0000 P 280, the Module name: GFSData.DLL

  Hello to all on the forum,

  I am running DIAdem 2015 (15.0.0f6005) on a Windows 7 Pro SP1 i3 4 GB RAM machine.

  I want to evaluate a test. Data are expressed as 25 .txt files. I need to plot, one of the values on the whole test time. I tried to combine the data from all 25 in one file .tdm .txt files. I came far enough until I met my problem. After gathering around 15 .txt files in a .tdm, tiara doesn't let me continue. It gives this error message (in German, I'll translate as good as possible):

  "When executing command 'DataBlClpPaste('1-52',1859122,0)' a rumtime error has occurred.

  Error: ACCESS VIOLATION

  Address of the error: 0000 P 280

  "Name of the module: FGSData.DLL.

  I will describe my procedure in which this happened:

  -Open the .txt with plugin I had created the first import

  -Ribbon with two windows view channel: have the target in a secondary window group, drag the newly imported from .txt in the other channels

  -In the secondary window with new data, select the lines I want to add to the data target group by clicking on the first line, then scroll to the last row and shift-select that. CTRL + c to copy the data

  -In the target group, click the first empty line, and then ctrl + v to paste data here

  After the last step, instead of pasting the new data in the target dataset, the above message error. I can't do anything, but click on 'ok '. After ok, the program window will not respond to any click except for switching between Navigator / View / analysis /... I have to close DIAdem, where I can always select "close and save", that works too.

  I could go a few times after reopening DIAdem, but finally, which stopped working. It now gives me the error message whenever I try to do this routine. The .tdm file is 21Mo now, the .tdx is 1.1 GB.

  I appreciate any help on this, I really would prefer combining data using DIAdem on trying to copy and paste around 1 GB of data .txt into one giant .txt file. It takes very long to not even open a .txt of 50 MB file, I fear this would be a messy process.

  Best regards

  Simon

  If you are using DIAdem 2015, there is a new entry in context menu where you can select Add.

  Maybe it helps.

  The help of DIAdem 2015:

  Adding data

  
  

  Adding data to merge similar series ratings data in order to deal with them. In the process, DIAdem adds the data to load for existing channels with the same name in the data portal instead of storing data in new channels. Perform the following steps to add the external data area data channels in the data portal:

  1. Open the NAVIGATOR tiara.

  
  

  2. Select remove internal data to delete the data in the data portal.

  
  

  3. Find the Demo1.tdm file in the file browser.

  
  

  4. Drag and drop the file in the data portal.

  
  

  5. Select the Demo2.tdm file in the file browser.

  
  

  6. Open the context menu of the file and select Add data.

  
  

  Tiara adds the data in channels that have the same name in the data portal. In the properties of the Data Portal window, you can see that the number of values in the channels has doubled.

• module ivuxoqoya.dll is not found

  On startup, I get this error message with a "appdata".  I cleaned my disk and it still appears and a drive next to my pointer just keeps turning.  The full message is the module ivuxoqoya.dll is not found

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Post your question in the forum Windows here: http://answers.microsoft.com/en-us/windows/forum

  It sounds like malware to me.  This module is not part of what Google can locate.

• Access violation at address 0e42128d in module AVSFLVFile3.dll. Access reading 0000000 C

  How to fix a breach of access to the address 0e42128d in the module AVSFLVFile3.dll. Access reading 0000000 C

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  1. Once you get this error?

  2. are you aware of changes to the computer before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 3 in the article by putting your computer to normal startup.

  Method 2:

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.