Evaluation of Director 11.5 - Spotlight turned off?

Similar Questions

• Spotlight search does not turn off

  I tried have disabled in general settings and it says its odf, but he won't let mt screen

  Your message is not very clear. You can not turn off Spotlight search. You can disable the apps Research Spotlight.

  What screen you're stuck on?

• My iPad turns off my wifi

  After the last update my iPad 2 Air turns off my wifi se option

  any ideas on how to solve this problem

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Satellite A300 spontaneously turned off

  Hi people.

  Hoping someone can confirm what I am already assuming that or possibly help me with something that I have not yet tried.
  My daughters a300 is off spontaneously without reason apparent. Sometimes less than a minute or so but above all a few seconds now.

  Weeks began by cutting only of now & again but it has far more common constantly where it stops almost immediately in most cases. Sometimes I can go as far as the Windows logon or a live cd/usb charge but 9 times out 10 now it is turned off during, before or after the post.
  Before this stop so quickly these days that I assumed it was a Windows problem, but this is obviously not the case, I know now.

  I had the machine open and cleaned that little dust he was. All fans work fine and I have aleardy swapped virtually all bars of the motherboard & CPU.
  I tried to boot from the live Linux CD & USB without any connected main player and I also tried without the battery connected and I ran memtest on his memory in another corresponding A300, we have in addition to control his drive to find errors etc. They are all very good.

  Don't really want to spend more than £100 for a new Board of Directors, if if there's a chance again, he might still be something else that I neglected to try.

  Thanks in advance.

  Hello

  Usually the laptop automatically stops due to a higher temperature.
  If the temperature rises to a critical level, the laptop stops to prevent material damage.
  This usually happens because that the cooling fans don't properly twist because of the dust.

  But it seems that you have already cleaned the cooling modules and fans, so in this case the higher temperature may not be the problem. So it seems that there could be other reasons for this

  Unfortunately, for me it s is not possible to say what role could be affected in the worst case, it could be a motherboard problem, but it could also be a RAM problem.

  Control programs memory are ok, but the RAM modules could still work even if the memory test would detect all problems. So it of certainly worth it to use a new RAM.

• Satellite M60/M55: Turns off after power loss

  Reposting because the original threads are locked.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15285&MessageID=55746
  My M60 sometimes turns off immediately after unplugging the power supply (AC power or plug the laptop CC), instead of out on the battery even though the battery is fully charged.
  The battery is OK & the laptop starts regularly on the battery after pressing the on switch.
  The Toshiba Power Saver seems to work OK & I have the latest version of the BIOS.
  I always save my work before unplugging, but again, I do not like this behavior & would appreciate some good advice.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19092
  Satellite M55 turns off by unplugging the power cable to unplug my laptop making rather that to the battery, my laptop will often simply turn off even though the battery is fully charged. Other time things work as it should.

  I had the motherboard replaced for another reason and was quite surprised to notice the problem after a replacement (but without reinstalling OS).
  The main suspect is the TPS and its pilot; A few months ago, a new version is released the Toshiba support site for M60 (although file dates are not fresh, and I think that I have installed this version earlier).

  So, I removed the GST and the GST pilot. I tried several times and it didn't happen again. Not even when I reinstalled the.

  During the test, I have disabled the HD write cache to avoid file corruption problems (but this slows down HD operation, particularly of hibernation).
  I don't know if it works because also earlier the computer would be closed only occasionally, not all the time. But this may be a clue in case you have this problem. If you do, please test and report the result, no matter what the result is.

  What to say dude. The problem is that this problem occurs ONLY occasionally and so it's not easy to find the real reason for these cases.

  However, I would try to give some useful advice, but first of all, it would be useful to know how old your battery.
  Fact is that batteries old and stressed loose clean performance very quickly.
  My battery is about 3 years and my laptop running on battery for 10-20 seconds even if it s fully charged. The performance is simple very low!

  On the other hand the problem could be related to faulty electronic power to the Board of Directors
  As you can see it's not easy to tell what's exactly wrong and as already suggested in other threads (locked), you should ask a technician for a control of the laptop.
  The guy could run diagnostics tests and can locate the fault.

  Best regards

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Turn off display when you use the external monitor R61?

  Hello

  I have a ThinkPad R61, which I use with an external monitor.  Somehow, I had in place for months with the laptop out of the screen and the monitor on.  I've used today at a meeting to feed a projector, selected somehow dieting Fn F7 of presentation such as the screen and the projector are-as I wanted - then home, re-installed with my external monitor and cannot find out how to turn off the display on the laptop.  The selections under Fn F7 do not allow this combination.  I tried the trick you offered, Fn F3 to turn off the display, but it turned out the two views.  (Now, how can I reverse this setting?)

  It sounds like a requirement of switching every day, but I can't find a clue in aid of ThinkVantage, manual mini, on the website, etc.  Thank you

  WaynO salvation,

  After pressing Fn + F7, click on manage plans... to open the Director presentation window. Then click the new... button. You should be able to put in place a system to only display on the external monitor. After setting up, make sure to check the box in the column Menu Fn + F7 to have your new schema appears in the menu when you press Fn + F7.

• Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so.

  Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so. Any ideas?

  My PC is an Asus
  3 GHz Celeron Prosessor
  2 GB of ram

  Hello Kenneth g. Mann

  What version of Windows 8 you have installed on your computer?

  The only thing I can think of that would cause the computer shut down every 2 hours would be if you have the Windows 8 Preview of consumers or the Windows 8 Preview version. These two operating systems were copies of the assessments only and were set to expire on 15 January and 16 January.

  Click the link here , which deals with these issues.

  If you have previews of Windows 8 evaluation, please answer and provide your version of the operating system and any error if set.

  Thank you

  Marilyn

• Turn off VApps before the DB migration?

  I'm under Director VCloud 1.5.2.x with a backend MS SQL 2008 R2 (2003 R2). I am preparing to migrate the Director and VC DB to a new SQL 2008 R2 (2008 R2 OS) server this weekend.

  What I was wondering is I have to turn off VApp running before migrating the database?

  Networks of VM/VAPP made if VC or Director's cut?

  I can't find any official documentation on this process. The info that I found a few States to stop the service, and to move the database.

  Stopping the service is expected to freeze the State of the DB. Networking is configured to the host. In theory, there is no need to turn off running the VApps

  Thoughts?

  Thank you

  -Joel

  You should not have to stop your workloads while they change state during the shutdown.

  ground handling, data movement, take old DB offline, run the script (to update the information of DB) configuration to start the services.

  You can get invited for certificates if you moved the file to original source on the bone of the cell keys.

  Also make sure you use the cell management tool for quiese the cells in your shutdown process.

• Partially turned off

  Hello

  We create a paralytic and the virtual machine by sending Agency following an instantiation of VDC: (the x must be replaced)

  < InstantiateVAppTemplateParams name = "xxxxx" xmlns = " " http://www.VMware.com/vCloud/v1 'xmlns:ovf =' http://schemas.dmtf.org/OVF/Envelope/1 ' deploy 'true' = >

  {1} < description > < / Description >

  < InstantiationParams >

  < NetworkConfigSection >

  Configuration settings for vAppNetwork < ovf:Info > < / ovf:Info >

  < NetworkConfig networkName = "xxxx" >

  < configuration >

  < ParentNetwork href = "xxxx" / >

  deck of < FenceMode > < / FenceMode >

  < / configuration >

  < / NetworkConfig >

  < / NetworkConfigSection >

  < / InstantiationParams >

  < source href = "xxxx" / >

  < / InstantiateVAppTemplateParams >

  All this goes well.

  Then, we strive to set up the guestcustomization and the networkconnection of this paralytic and this virtual machine by sending bodies following XML to the guestCustomizationSection of the virtual machine and the networkConnectionSection of vApp, respectively. Again, the x need to be replaced:

  < GuestCustomizationSection xmlns = " " http://www.VMware.com/vCloud/v1 'xmlns:ovf =' http://schemas.dmtf.org/OVF/Envelope/1 '

  type =' application/VND. VMware.vCloud.guestCustomizationSection + XML' href = "xxxx" ovf: required = "false".

  xmlns: xsi =' http://www.w3.org/2001/XMLSchema-instance '

  xsi: schemaLocation = " " http://schemas.DMTF.org/OVF/envelope/1 http://schemas.dmtf.org/ovf/envelope/1/dsp8023_1.1.0.xsd http://www.vmware.com/vcloud/v1 http://xxx/schema/master.xsd">"

  < ovf:Info > specifies Guest OS customization settings < / ovf:Info >

  < enabled > false < / enabled >

  < ChangeSid > true < / ChangeSid >

  < JoinDomainEnabled > true < / JoinDomainEnabled >

  < UseOrgSettings > true < / UseOrgSettings >

  < AdminPasswordEnabled > true < / AdminPasswordEnabled >

  < AdminPasswordAuto > false < / AdminPasswordAuto >

  < ResetPasswordRequired > false < / ResetPasswordRequired >

  < CustomizationScript / >

  XXXX < ComputerName > < / ComputerName >

  < link rel = "Edit" type='application/vnd.vmware.vcloud.guestCustomizationSection+xml' href = "xxxx" / >

  < / GuestCustomizationSection >

  < NetworkConnectionSection xmlns = " " http://www.VMware.com/vCloud/v1 'xmlns:ovf =' http://schemas.dmtf.org/OVF/Envelope/1 "type='application/vnd.vmware.vcloud.networkConnectionSection+xml" href = "xxxx" ovf: required = "false" xmlns: xsi =' http://www.w3.org/2001/XMLSchema-instance ' xsi: schemaLocation = " http://schemas.dmtf.org/OVF/Envelope/1 http://schemas.dmtf.org/ovf/envelope/1/dsp8023_1.1.0.xsd http://www.vmware.com/vcloud/v1 http://xxxx/schema/master.xsd" >

  < ovf:Info > specifies the available VM network connections < / ovf:Info >

  < PrimaryNetworkConnectionIndex > 0 < / PrimaryNetworkConnectionIndex >

  < NetworkConnection network = "xxxx" >

  < NetworkConnectionIndex > 0 < / NetworkConnectionIndex >

  < IsConnected > true < / IsConnected >

  < IpAddressAllocationMode > POOL < / IpAddressAllocationMode >

  < / NetworkConnection >

  < link rel = "Edit" type='application/vnd.vmware.vcloud.networkConnectionSection+xml' href = "xxxxx" / >

  < / NetworkConnectionSection >

  Yet once, all this goes well.

  We begin to experience problems when trying to turn on / turn off the virtual machine. Everything we try - anything under power off / on the TIME or the machine itself - we don't seem to get good deeds and indicate subsequently. An example to clarify what I mean by that: suppose we did a virtual machine by performing the steps above. Then, send us a power control on (powerOn/action /) to the paralytic (or vm). Later, send us a Power Off command (action/extinction /). When we look into vCenter / vCloud director, we see that the virtual machine is stopped, but the vApp is still 'running' in a State partially powered Off . We do not seem to completely stop. It is a problem because we want to show users the different actions on this virtual machine, given his State. Stuck in that State party powered off, there is no action of deletion in the XML link nodes received questioning the virtual machine.

  Thanks in advance,

  Kind regards

  Klaas

  I don't know if this is the case, but there are actually a few actions that govern the State of the virtual machine. They deploy and walk to start the virtual machine. Extinguishment and cancellation of the deployment to stop it. These should be 4 different API calls. The UI allows to expose all this, but then we decided that we could have confused end-users as they want to just push a button and the power (or turn off). That's what the two buttons in the UI do today (the API calls green it means two and even made the Red).

  If you build your application against the API, you must use four calls accordingly. I'm not a person of the API... then apply your filters of programming skills to what I say here.

  I'm not sure that we are talking about the same thing, but generally those "partially on / off...". "States are for this reason. HTH.

  Massimo.

• sprite channel does not turn off

  Should be simple; I have a sprie I turn off so it does not play on the stage (works well here), but when I saw in a browser, it is not off. I'm on OSX; MX2004.

  Sprite channels that you turn it off by clicking the button in the
  partition is not saved between sessions. Therefore, if you close Director
  then open it again, this sprite channel likely will be visible again.
  Same goes for the preview in a browser (or publish on projector).
  Start all channels of sprite always visible.

  If you want to force an invisible first channel, you can do
  in a movie script:

  on startMovie
  Sprite (1) .visible = 0
  end

  Who will make channel sprite 1 invisible until you whether visible
  Once again, like this

  Sprite (1) .visible = 1

• Access code is lost as soon as the screen turns off

  When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

  I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

  The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

  Hello

  Make sure the wrist detection is enabled:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

• I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

  I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.

• After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

  Batteries.

• Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Settings > display and brightness > raise to Wake