Evolution of the data center: N7k or C6500

Similar Questions

• Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is back different physical storage

  Hello

  I am new to vCenter Server, so you can assume that I'm missing something obvious.

  I installed vCenter Server 5.5 and one of the two hosts of re-usable ESXi 5.0.0 connected correctly. When I try to connect to the second 5.0.0 ESXi host, I get the error message:

  Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is supported by different physical storage

  I Googled it and found what I think are the best answers that are successful, but they all seem pretty unique in their situation (they have a cluster, I do not have) etc. Some solutions involve disconnecting the store of data and reconstruction of things. I would not make things worse and can live without doubt with the help of vSphere client (and not the web client) until maybe I can start again with a 5.5 installation to a new host once I have back up everything from the host unconnectable. I closed all the VM on the host of the second. I have put in maintenance mode. I've renamed the data store, all to nothing does not.

  Thanks in advance

  The problem is that a whole army could not be connected to vCenter due to the problem, the solution involving disconnection of the host apply.

  Here is how I solved the problem:

  1 use the client vSphere client heavy, connect you to the host that cannot not be connected to vCenter Server.

  2. click on the host computer, and then click the Configuration tab.

  3. click on "storage".

  4. find the offending on the right data store.

  5. right click on the data store incriminated and click 'remove '.

  6. click on 'Add storage' in the top right.

  7. follow the steps to find this data not mounted store. I gave him a new name just to be sure, even if it's probably not necessary.

• Getting the data center of VirtualMachine with Get-View information

  Hello

  Y at - it a faster way to get the name of data using Get-View and the viewtype VirtualMachine Center.

  I found the following:

  Get-View -ViewType VirtualMachine -filter @{ "name" = "mtl1fsit02" } | Select-Object -Property Name, 
  @{ Label = "GuestOSName"; Expression = { $_.summary.guest.guestfullname } }, 
  @{ Label = "Datacenter"; Expression = { (Get-view (Get-View (Get-view $_.parent).parent).Parent).name } }
  

  Thank you guys

  I think that the property calculated for the data center does not work in all situations.

  It assumes that your virtual machines are 3 levels down from the data center, which is not always the case.

  I personally use a loop, passing up through the parents, until he finds an object data center.

  something like that

  @{N = 'Center'; E = {}

  $parentObj = get-view $_. Parent

  While ($parentObj - isnot [VMware.Vim.Datacenter]({))

  $parentObj = get-view $parentObj.Parent

  }

  $parentObj.Name

  }

• Orchestrator 5.1 REPORT-all the virtual machines in the data center and create a CSV file

  Hello

  What I basically want to do is create a report CSV of all virtual machines in the data center with various information (VMname, domain name FULL, IPaddress, status, data warehouses, tools etc...).  The export list in the client feature is insufficient (especially for any KPI report).

  Problem: (workflow is still under construction so real email send does not not and need to clean the code)

  I am stuck at the part of the creation of a table that can be parsed correctly in the CSV file.  2 ways I've tried will produce a report of single object or combine all of the table into a single string (where I am now).  I think the main problem I have is that I have to create a 2D within my service to push toward the final table that is written to the CSV format.  Basically, I do not understand how to push my variables in a loop of a table.

  Any help or assistance?

  Thank you

  B

  BOOM!

  Added some comments, removed the hardcoded in the csv temp file, deleted path the hardcoded port 25 for SMTP - mail settings should come from the configuration of the MAIL plug-in. And fixed / confirmed that the workflow now includes the attachment for e-mail and ends with success!

• Total amount of storage in the data center

  I'm trying to get a script that will give me the whole total amount of space used in a data center. I want to launch against the center of data from virtual centres. There is a total of approximately 1900 of virtual machines and virtual machine is distributed among several LUNS. I need to get the overall figure for a migration.

  PS: I want to get the numbers in GB instead of megabytes and I also want it spits out a report in .csv on my local machine (c:\scripts\xxxx.csv)

  
  

  
  

  Thank you guys.

  I'm afraid that it won't work by changing just the data center-Get Get-cluster.

  The reason is the cmdlet Get-data store later in the script, on the location setting it only accepts the data center objects, folder and DatastoreCluster.

  But with a little small change, we can get it to work for clusters as well.

  Get-Cluster | Select Name,@{N="Storage Used (GB)";E={  $sum = Get-Datastore -RelatedObject (Get-VMHost -Location $_) |   where {$_.ExtensionData.Summary.MultipleHostAccess -and $_.Type -eq "VMFS"} |  Measure-Object -Property CapacityGB,FreeSpaceGB -Sum  [Math]::Round($sum[0].Sum - $sum[1].Sum,2)}} |Export-Csv c:\scrpits\xxxxx.csv -NoTypeInformation -UseCulture
  

• How to get the data center moref moref VM in c# using

  Hi all

  Could someone tell how to get managedobjectreference of data center using the VM moref? or any other easy way is? If anyone has examples of code in c# please share with me?

  Thank you

  Vijaya

  You can get the data center in which the virtual machine resides by the following search:

  VM Moref-> Parent (vmFolder)

  Moref folder VM-> Parent (data center)

  Parent of the virtual computer object will always be the vmFolder and the vmFolder object will always be a data center.

  For more details on the model of article inventory of vSphere, take a look at this blog post - http://www.doublecloud.org/2010/03/vsphere-inventory-structure-deep-dive/

• Shortcut to achieve VCDX virtualization in the data center.

  Friends,

  I would like to know to achieve VCDX can choose path below to avoid to submit the design VCDX defense.

  VCP5-VTC > VCAP5DCA > VCAP-CID > VCDX - data center virtualization.

  Who currently hold VCP5-VTC & VCP Cloud. VCAP5DCA inprogress... hope it will pass soon

  Any information will be greatly appreciated.

  Please notify.

  Thank you

  Knockaert

  Yes - actually if you want the VCDX Cloud you have to earn the VCAP-CIA and certification VCAP-CID before sit you for the VCDX defense according to the chart here - (VCDX-cloud) VMware Certified Design Expert-cloud.

  The other option is to pursue and get VCDX-VTC and when you pass the VCAP-CID cert, you will get the Cloud VCDX certification.

  I also move the VCDX forum

• Rename the data center?

  Hello

  I would like to rename my datacenter. Is this possible without impact to the underlying Cluster, hosts, and virtual machines? I tried in my test environment without any problem, but first I'll do in production I want to be sure there are no known issues.

  The environment is:

  VSphere 5.1.0

  Data Center

  Cluster having about 22 hosts ESXi - 5.1.0 - 7997

  approximately 120 virtual machines.

  Thanks for your help!

  It will not affect your underlying infrastructure. You can go ahead and do it.

  It will create problems if you use the view.

• Info from data store based on the location of the data center

  Hello

  I wrote a powershell script to get the amount of free space available in the stores of data butthis is too high

  I need the information broken down according to the opinion of the 'data warehouses' with the virtual Center

  EG - my eyes record data centre as

  Teir 1

  X-x-x-x-x-x-x data warehouses

  Teir 2

  X-x-x-x-x-x-x-x data warehouses

  Teir 3

  X-x-x-x-x-x-x-x data warehouses

  Can someone please

  Altogether.  The problem has to do with the Canal works and references that you are trying to use the output the way.  There are several ways to handle this, and I think that it can do what you want.

  Get-Datacenter  |  Foreach-Object { $dc=$_; $dc | Get-Datastore | Select-Object @{name="DC Name"; expression={$dc.name}},Name,FreeSpaceMB,CapacityMB}
  

• Utility to recover the data center configuration information

  Hello

  Y at-it a utility from Vmware to capture or collect the configuration information from data centers and ESX servers configured under vCenter Server that can provide me with all the information of CPU, memory, disks, storage and development network, and other configurations.

  Thanks/looks

  Take a look at RVTools: RVTools - home

• Get errors when creating VM within the data center.

  A component of the virtual machine is not accessible on the host computer.

  What could be the reason?

  are using you local storage on you're guests rather than a shared storage?

• Mixed Hyperthreading servers in the data center

  Nice day

  I was wondering if there was a negative impact on having an environment ESX 3.5 with servers that allowed of HT and servers who are not capable of HT. If there are problems with this, no one knows what they are. VMotion and smotion still work? It will have an impact on DRS? etc etc...

  Thanks for the posting of this message

  David

  As long as processors are compatible for vMotion ther could be no problucm running servers with HT active or not in the same cluster - but like another user said that it is advisable to have HT enabled if it is available-

• Virtualization from the data center to the presentation of office...

  Hello

  I was hoping someone might be able to point me in the right direction towards a kind of powerpoint presentation to explain virtualization from the datacenter to the desktop...

  I recommend you to review the recorded webcasts

  http://www.VMware.com/a/webcasts/recorded/

  you will find some useful information

  Jose Ruelas B

  http://aservir.WordPress.com

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Script to get the tree of data center

  Hi all

  I want to return a complete tree of data through script task centers.

  example:

  Datacenter1:

  CLUSTER1:

  Host1:

  Host2:

  VM1:

  VM2

  When I try to enumerate the data center to get this Cluster fails. Can anyone help on this?

  MyScript:

  var myDatacenters = VcPlugin.getAllDatacenters ();

  for each (i = 0; i < myDatacenters.length; i ++)

  {

  for each (mycluster in myDatacenters [i] .cluster)

  {

  System.Debug (cluster. (Name)

  for each (myHostSystem to myCluster.host)

  {

  System.Debug (myHostSystem.Name);

  for each (myVMs to myHostSystem.vm)

  {

  if(myVMs.isTemplate==true)

  {

  System.Debug (myVMs.Name);

  }

  }

  }

  for each (myDatastore to myCluster.datastore)

  {

  System.Debug (myDatastore.Name);

  mytotalDatastoreCapacity += myVcDatastore.summary.capacity;

  mytotalDatastoreFreeSpace += myVcDatastore.summary.freeSpace;

  }

  }

  }

  Hi LuckyT,

  There is no attribute VcDatacenter.cluster, you could use VcPlugin.getAllClusterComputeResources () instead.

  But I found a code on my environment facing maybe also your needs:

  for each ( var myDatacenter in VcPlugin.allDatacenters ) {
    forEachChildEntity ( myDatacenter );
  }
  
  function forEachChildEntity( myChildEntity ) {
    switch ( true ) {
    case myChildEntity instanceof VcDatacenter:
    System.log( "Datacenter:" + myChildEntity.name );
    for each ( var myChildEntitysChildEntity in myChildEntity.hostFolder.childEntity ) {
    forEachChildEntity( myChildEntitysChildEntity );
    }
    for each ( var myChildEntitysChildEntity in myChildEntity.datastoreFolder.childEntity ) {
    forEachChildEntity( myChildEntitysChildEntity );
    }
    for each ( var myChildEntitysChildEntity in myChildEntity.networkFolder.childEntity ) {
    forEachChildEntity( myChildEntitysChildEntity );
    }
    for each ( var myChildEntitysChildEntity in myChildEntity.vmFolder.childEntity ) {
    forEachChildEntity( myChildEntitysChildEntity );
    }
    break;
    case myChildEntity instanceof VcFolder:
    System.log( "Folder:" + myChildEntity.name );
    for each ( var myChildEntitysChildEntity in myChildEntity.childEntity ) {
    forEachChildEntity( myChildEntitysChildEntity );
    }
    break;
    case myChildEntity instanceof VcClusterComputeResource:
    System.log( "Cluster:" + myChildEntity.name );
    for each ( var myChildEntitysChildEntity in myChildEntity.resourcePool.resourcePool ) {
    forEachChildEntity( myChildEntitysChildEntity );
    }
    break;
    case myChildEntity instanceof VcResourcePool:
    System.log( "ResourcePool:" + myChildEntity.name );
    for each ( var myChildEntitysChildEntity in myChildEntity.resourcePool ) {
    forEachChildEntity( myChildEntitysChildEntity );
    }
    break;
    case myChildEntity instanceof VcVmwareDistributedVirtualSwitch:
    System.log( "DV Switch:" + myChildEntity.name );
    for each ( var myChildEntitysChildEntity in myChildEntity.portgroup ) {
    forEachChildEntity( myChildEntitysChildEntity );
    }
    break;
    case myChildEntity instanceof VcDistributedVirtualPortgroup:
    System.log( "Portgroup:" + myChildEntity.name );
    break;
    case myChildEntity instanceof VcStoragePod:
    System.log( "StoragePod:" + myChildEntity.name );
    break;
    case myChildEntity instanceof VcVirtualMachine:
    System.log( "VirtualMachine:" + myChildEntity.name );
    break;
    default:
    System.log( "Unknown:" + myChildEntity.name );
    break;
    }
  }
  

  Kind regards

  Chris