Excerpt from forcing to check the point/single looking for archive_log 5 - days years

Similar Questions

• I can't find the file and I can't transfer music from my computer to the windows media player for my sony walkman.

  Original title: C:\Program Files\Sony\WALKMAN-Guide\NWZ-S540\Backup

  I can't find this file and I can't transfer music from my computer to the windows media player for my sony walkman.

  Thank you

  Minerva

  Hello

  1 did you change on your computer?

  Method 1:

  I suggest you to follow the links and check out them.

  Find a file or folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-file-or-folder

  Tips for finding files

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

  Method 2:

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

• Firefox does not allow me to check the box "Remember passwords for sites". What should I do?

  I have iAntivirus, not Norton or McAfee. Wanted to install "remember passwords" and "remember pass" are not add-ons, but the key to the right arrows and after removing these 2 modules I can't check the box "remember password for sites". What should I do? I really want to save my passwords.

  Hello romkom, you can not save passwords when you chose to always run firefox in private browsing mode in the Preferences > privacy Panel...

• How can I check the status of activation for CS4

  I would like to check the status of activation for CS4, S/N < mod redacted >

  Click Help and, if enable is dimmed and disable is clickable, your program is currently active.  If disable is dimmed and to activate is clickable, your program is currently disabled.

• Change the label after you check the sum of calculation for the column

  Hi all
  
  I have a crosstab report and I checked the 'sum of calculation' for each column and the total at the bottom. The label is 'full report '. How to change this label?
  
  Thanks in advance!

  On the attributes page of the report, in the region to break the formatting, you can put your text into the field "Display this text when printing of money to report".

• How to check the status of battery for Cyber-shot?

  How to check the status of battery for Cyber-shot?

  Depends on what Cyber-shot you have - in General, there should be a DISP button, or menu on site that display. The State of the battery is usually at the top right.

  The DISP button is usually the UP button.

  In addition, depending on the type of use of the Cyber-shot battery, it can never just to display the bars, or it can show a percentage.

• I can (Edit PDF files) using my account of the composition of cloud creative single-app for Acrobat Pro (one year)?

  I have account membership cloud creative single-app for Acrobat Pro (one year).

  Can I change my PDF files using this account?

  That's what Acrobat is designed to do

• "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  "Sorry, we could not connect to the Microsoft services right now. If the problem persists, look for 'referee' on the start screen.

  This appears when I try to connect with Microsoft Account.

  I tried all the possibilities that was displayed in the link but when even the problem exists... below you please suggest me the solution to add the microsoft account

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-networking/sorry-we-couldn

  Hi Nikhil,

  If you connect through a proxy, then I suggest you to try the steps suggested in this article and checking:

  http://support.Microsoft.com/kb/2778122/en-us

  Keep us updated on the results.

• Suddenly, when I search using the address field, I am is more directed directly on the site I look for ex-BBC, as I was before. To place a web page

  When I search using the address field, I am is more directed directly on the site I look for ex-BBC, as I was before.

  Instead Google web page appears with a list of proposals, and I have to click on the link to the BBC it to get on the site.

  Ways you can give me the code to insert in the "topic: config" keyword. URL

  r

  Take a look at this module.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/keywordurl-hack/

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• I need to change my plan which is creative cloud single-app for Photoshop membership (one year) full - special offer to students

  I need to change my plan which is creative cloud single-app for Photoshop membership (one year) full - special offer to students

  Single update for all http://forums.adobe.com/thread/1235382 clouds can help

• Check the point of the Image

  Hello world
  
  I have the point of the image as an element of database into my forms 6i application, how can I check if the image element is null or not? because I have a button to delete the image, and I want to make this active button only if there is an image in the image element.
  
  IF: Image_Item IS NULL THEN... END IF; is not... any idea?
  
  Thank you very much
  
  
  
  Best regards
  Damien

  you want to test this field if it is null or not... How can I implement this?

  Ali El - Hal pls try the following...

  ---- if u fetch the image first into a variabel IN WHEN-BUTTON-PRESSED Trigger as follow
  
  SELECT ur_image_item
  
  INTO : XYZ                   -- same data type
  
  FROM ur_tabel_name
  
  WHERE  EMP_ID =:EMP_ID;
  
  -- Then make ur validation
  
  IF  : XYZ IS NULL THEN
  
  DELETE_RECORD;
  
  END IF ;
  

  I hope this helps...

  Kind regards

  Abdetu...

• This item was not found. It is no longer in C:\user\pc\music\backed up\various. Check the point; the location and try again.

  When I try to move the music I just loaded on my computer, I get this message. I can play the music on my computer fine, but cannot drag it to my usb slot. I'm trying to load it on a micro sd card using a usb port. I did it many times and this time I'm having this problem. I tried to put videos and the same thing happens. I even disabled my anti virus and fireeall to try and nothing works. I have already restored my computer for the first day available and the problem is still there. I also checked that file sharing is on. What can I do? Help, please.

  Hi JerryCxz,

  You can check the following link and try to run the Fixit and check.

  Diagnose and repair Windows files and folders problems automatically

  You can also try to use another USB drive and check.

  Hope this information is useful.

• Need diagram to check the close switch cover for dell inspiron 1525

  Need schematics for Dell Inspiron 1525, check the following points:

  • proximity LCD cover switch
  • cable from the motherboard to the inverter
  • How to check the inverter

  Thank you

  This is the most you can get from Dell

  http://support.us.Dell.com/support/eDOCS/systems/ins1525/en/SM/display.htm#wp1179838

  Complete maintenance manual

  http://support.us.Dell.com/support/eDOCS/systems/ins1525/en/SM/index.htm

• Check the box 2 tables for difference

  Hello

  I need help, I am trying to loop through the two tables that contain clips video and compareing the differences

  Here is my code so far:

  var SavedJobArray:Array = new Array();

  var NewJobArray:Array = new Array();

  function FillSavedArray (): void

  {

  var Temp: MovieClip = new BlackMC();

  Temp.JobNumber = 11;

  SavedJobArray.push (Temp);

  var Temp2:MovieClip = new BlackMC();

  Temp2.JobNumber = 22;

  SavedJobArray.push (Temp2);

  var Temp3:MovieClip = new BlackMC();

  Temp3.JobNumber = 33;

  SavedJobArray.push (Temp3);

  }

  function FillNewArray (): void

  {

  var Temp: MovieClip = new BlackMC();

  Temp.JobNumber = 111;

  NewJobArray.push (Temp);

  var Temp2:MovieClip = new BlackMC();

  Temp2.JobNumber = 22;

  NewJobArray.push (Temp2);

  var Temp3:MovieClip = new BlackMC();

  Temp3.JobNumber = 33;

  NewJobArray.push (Temp3);

  var Temp4:MovieClip = new BlackMC();

  Temp4.JobNumber = 444;

  NewJobArray.push (Temp4);

  }

  var SameJobCount:int = 0;

  function checkJobArray (): void

  {

  trace ("saved job Array:" + SavedJobArray.length);

  trace ("new Job Array:" + NewJobArray.length);

  var TempSaved:MovieClip;

  for (var i: int = SavedJobArray.length - 1; i > = 0; i--)

  {

  TempSaved = SavedJobArray [i];

  var TempNew:MovieClip;

  for (var j: int = NewJobArray.length - 1; j > = 0; j-)

  {

  TempNew = NewJobArray [j];

  If (TempSaved.JobNumber is TempNew.JobNumber)

  {

  SameJobCount ++;

  trace ("match:" + TempSaved.JobNumber + "&" + TempNew.JobNumber);

  If the match is found, remove them from these two tables

  SavedJobArray.splice (SavedJobArray [i], 1);

  NewJobArray.splice (NewJobArray [j], 1);

  }

  }

  }

  traceNewJobs();

  }

  function traceNewJobs (): void

  {

  var TempNew:MovieClip;

  for (var j: int = NewJobArray.length - 1; j > = 0; j-)

  {

  TempNew = NewJobArray [j];

  trace ("NEW JOB:" + TempNew.JobNumber);

  }

  }

  FillSavedArray();

  FillNewArray();

  checkJobArray();

  I want to be able to do, is makes a loop on both tables and see if the "number of jobs does not equal"... compare the savedjobarray with the newjobarray and see if the new work contains a number of jobs that the registered job board does not.

  I tried something different and those that correspond to I spread the tables... but it's not really working.

  I hope that this fact,

  Thank you in advance for your help!

  OK, so all that matters is the number of jobs and the elements may appear anywhere in any list. You want just the unique number of jobs in any list. For this I would be to iterate through the tables of the number of jobs in the two temp tables. After I would go longer temporary table, eliminating any number of jobs (from two temp tables) that match. What you end up with is potentially two paintings not corresponding employment that you can combine into a single list.

  Sounds more complicated than it is.

  function checkJobArray (): Array

  {

  expansion (outer loop)

  var tempArr1:Array;

  var arrayOrder:int = 1; 1 = saved is temp1, 2 = New temp1

  If (SavedJobArray.length > NewJobArray.length)

  {

  tempArr1 = SavedJobArray

  }

  on the other

  {

  tempArr1 = NewJobArray;

  Since the New is tempArr1, adjust arrayOrder

  which is later used to return results

  arrayOrder = 2;

  }

  smallest (inner loop)

  var tempArr2:Array = SavedJobArray.length< newjobarray.length="">

  iterate over a greater Bay

  for (var i: int = 0; i< temparr1.length;="">

  {

  check if the job matches the smallest matrix (iteration)

  for (var j: int = 0; j< temparr2.length;="">

  {

  football game?

  If (tempArr1 [i]. JobNumber is tempArr2 [j]. JobNumber)

  {

  Yes, remove both

  tempArr1.splice (i, 1);

  tempArr2.splice (d, 1);

  We have reduced the table on this index,

  must reduce the index continue

  i-- ;

  j-- ;

  increase matching jobs

  SameJobCount ++;

  }

  }

  }

  all that's left are jobs that do not match.

  you want a single list? Concat together:

  return tempArr2.length > 0? tempArr1.concat (tempArr2): tempArr1;

  you want to separate lists? return of the separate tables [SavedJobs, NewJobs]

  the use of arrayOrder from above to determine the appropriate order.

  return arrayOrder == 1? [tempArr1, tempArr2]: [tempArr2, tempArr1];

  }

  Test:

  differences in var: Array = checkJobArray();

  trace (differences.length + 'difference (s)');

  for (var idx:int = 0; idx< differences.length;="">

  {

  trace (differences [idx]. JobNumber); See the differences

  }

  Traces:

  3 difference (s)

  111

  444

  11

  As with anything, it has a limit. If you have any repeated JobNumbers 1 single corresponding instance of them is removed, leaving behind the JobNumber double as a difference.

  example of a nickname for example (which means that it is not the code you can use, just understand)

  var NewNumbers:Array = [1, 1, 2, 3];

  var SavedNumbers:Array = [1, 2, 3, 4];

  If these tables could run through this function, only the first duplicated "1" would be removed from the two bays, leaving another '1' NewNumbers. In the end, the difference would be: 1, 4

  You may want to only * shrug *.