Exchange services

Similar Questions

• Exchange Server 2003 Exchange Services stopped working.

  Hello!

  I have a Windows SBS (2003), which is my domain controller and Exchange Server (2003) is installed. Arrived on site this morning only to discover that Outlook was not opening. Check the Small Business Server and it was running. However, most of the Exchange Services stopped running:

  

  I tried to restart the services, but they kept not. I even rebooted a couple of times in hopes that I get lucky but luck was not on my side. Here is the error message and the system logs, I got the failure:

  Windows could not start the Microsoft Exchange Information Store on the Local computer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 0-specific error code.

  In the system event log:

  Source: Service Control Manager

  Category: None

  The event ID: 7024

  Description: The Microsoft Exchange Information Store service stopped with the error special service 0 (0x0).

  I also have a couple of events in the Application log:

  Source: MSExchangeIS

  Category: general

  The event ID: 5000

  Description: Could not initialize the Microsoft Exchange Information Store service. Failed to initialize security - error 0 x 80004005.

  Source: MSExchangeSA

  Category: Monitoring

  The event ID: 9098

  Description: "The analysis MAD thread was unable to read its configuration from the directory service, error ' 0x8007007e".

  I tried to uninstall and reinstall the SMTP Protocol, but it did not help. I also watched some wires, but they seem not directly related to my question.

  When I tried to start the STMP service, it is to get the error message: failed to start the service SMTP Simple Mail Transfer Protocol () on the Local computer. Error 126: The specified module could not be found.

  It's the system log:

  Source: Service Control Manager

  Category: None

  The event ID: 7023

  Description: SMTP Simple Mail Transfer Protocol () service terminated with the following error: the specified module could not be found.

  The server worked fine the day before and it did nothing for the server that I can recall which will trigger such.

  I have TrendMicro Worry Free Business installed on the server but I also exclusion of files/folders to the Exchange folders / file (s). At this setting for a few years and nothing has changed. No update or something has been done since the last time it was running.

  Although I have included one or two mistakes, I got messages and logs for all services failed.

  Help!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Unfortunately the Exchange Service stopped

  After upgrade to lollipop I'm more sync my calendar from Outlook.com. I cannot synchronize e-mail. All I get is this message on stopping the Exchange service. I have clear accounts, e-mail data and calendar - nothing works.

  This is extremely annoying because I'm not able to use the phone in the way I did so far and is not possible to return to the previous firmware.

  Someone has an idea how to fix?

  Technical support - looking forward to immediate solution or a qick patch.

  Thank you!

  It is a forum for basic users, you must contact Sony directly

  http://support.sonymobile.com/global-en/contactus/

• "Security error" when setting 'Microsoft Exchange Hosted Services' Exchange account (user in company)

  I am a user in a company with a very large company that actually uses Microsoft Hosted Exchange services hosted by Microsoft employees in their facilities.  I called Palm support and they were clueless and zero help.  The lady pointed me to some Palm article I had already read and only remotely had nothing to do with my problem.  I don't see anything about this error message in the forums and google searches. Sprint has even replaced my other reasons palm pre, and the same error occurs once I configured the exchange account. I also see the error when I set up my account on my pixi nine wives. Our pre and pixi have already exchange accounts set up with success on our phones that are hosted by sherweb. Sherweb's exchange accounts work fine. I tried to set up this account of microsoft hosted exchange 5 - 6 times with the same result. He accepts my configuration information and adds to the list of email accounts available in the meadow. However, it keeps popping up the message stating "error of security policy:"Exchange..." Tap for details"(with a yellow exclamation point). Then he said "Security policy error" the Exchange (first part of my email address) account is disabled because it is impossible to define security policies. "'Leave this option disabled' or 'delete account '. I know that something does not work because it applied a policy of password or PIN on my phone which is not necessary, unless the account has been added. I can also see it in the "Mobile devices" section of outlook web when I login. This is the place in web outlook where you can see the last time the device synchronized, if remote, you can wipe the phone etc. If anyone has an idea how to solve my problem please post. Any ideas? I'm fresh out of ideas on this issue and very frustrated by the Palm developers. Just another example of evil-development and practical tests by Palm. I hope they correct this problem on later versions, but I'm only slightly optimistic that they will never get this medium of exchange e-mail at the level necessary for the support of large corporations. What I know is that my Microsoft Hosted Exchange account works fine on a Windows Mobile phone and an iPhone 3GS (confirmed by the other coworks who have set up their phones using our Exchange services). Accordingly, I have no choice but Palm to blame for this problem instead of Microsoft. Please, Palm fully support microsoft exchange e-mail users!

  After a lot of research on the subject, here is my point of view on the State of support for MS Exchange @ Palm and other companies.

  Unfortunately, Palm Pre and Pixi, WebOS is not fully supported Microsoft Exchange.  This has led to numerous reports of frustrated customers and countless hours of time wasted by consumers and technical support trying to figure out how to connect these Palm devices to the MS Exchange e-mail servers.  Way to go Palm!  Provide support for all the free email accounts worldwide and decide not to develop a product that is able to support your most rich and more influential-based email clients.  These are the people who are most likely able to spend more money on your mobile products or make decisions for companies that are able to buy huge amounts of smart phones.  Way to go guys!  Penny wise and dollar foolish if you ask me!  Palm supports only partially a handful of MS Exchange security policies.  They document what they take in charge, but they do a very poor job of documenting or even explain the limitations of the software.  Their States of documentation that the security policies that are not supported will not be applied and that users will still be able to connect to the exchange server.  This is certainly not true based on the reported error and other similar user reports.  Here is how iPhone and Palm compare in regards to the support of MS exchange security policy.  Notice in the quotes below the iPhone supports the policy of 'require the encryption of devices' which is very probably used by your greater and more security conscious companies or Government institutions.  I'm sure that Palm's inability to support "device encryption" is why I get this error, even if I have really no way to prove it at the present time.  Come on Palm, if you go to support full POP3 and IMAP, you must provide the full support of the binding protocol and political security by Microsoft Exchange product.  Here is the comparison between iPhone and Palm WebOS:

  ' Said the site of Apple, the iPhone supports the camera allow, password enabled, allow a Simple password, alphanumeric password, Password Expiration, history of password, Maximum password attempts failed, minimum password length, maximum idle lock, policy, Minimum refresh interval complex character devices. ", require manual synchronization while roaming and - in iPhone OS 3.1 only - require Device Encryption". (13 security policies)

  "Palm Web site says its WebOS 1.1 and later support active password, alphanumeric password, password history, Maximum password attempts failed, maximum length password, lock of inactivity maximum, Minimum peripheral characters complex and Password Recovery." (8 security policies)

   

  Windows Mobile 6.1 supports all THE policies.

  BlackBerry does not support the EAS (MS Exchange)

  Google's Android is not compatible EAS (they may have recently released some support but not full)

  Conclusion: If you want a mobile device that fully supports MS Exchange, buy something that is running Windows Mobile 6.1 (or higher) or even an iPhone 3 g (or more).  At least, until Palm decides they want to throw a development more $$ to support Microsoft Exchange E-mail to enhance their level of support.

  Reference: "how to avoid the lie of the foreign exchange policy by smartphone' http://www.infoworld.com/d/mobilize/how-avoid-smartphone-exchange-policy-lie-004?page=0, 1

  Message edited by morgan1112 on 12/01/2010 15:00

• Exchange 2003 Server kept receiving unknown Email sending out through SMTP and the paper jam in the queue folder

  Hello Sir,

  I have a problem with one of my SBS Exchange 2003 servers.

  At first, I was getting a lot of 3008 errors for a non-delivery report with a status code of 5.0.0 was generated for recipient rfc822; address email is removed from the privacy * all these repeated error messages from the event log, SMTP and Exchange Routing service...

  I looked around and discovered more than 10000 .eml in my x:\program files\exchsrv\mailroot\queue folder.  At first, I thought that my server or one of my workstations was compromised, but all workstations have local antiviral software (symantec endpoint protection), my server software also has antiviral and I have a mail server antivirus (symantec endpoint protection).  I scanned all of the computers on the network and even tried almost all of them closing to see if new entries have been created in the queue.

  Unfortunately, more than entries kept by appearing so I kept looking.  By opening one of the .eml, I discovered my own responsibility that I attach to outgoing emails if I have my server acted as a mail relay.  I checked for this and I have been clean.  I kept searching in the .eml and discovered different origins IPs of the Internet.  Am I right to assume that my mail server is BOMBED or attacked with emails with false return addresses and my mail server sends return NDR for spammers/compromised machines on the net?  I tried to stop the exchange services and tried to rename the vsi file 1 to something else as one of the suggested MSKB, but the file was protected.  How can I stop this, it's slowing down my mail server and fill out my HD.  I can't block the IP to shippers because it comes from everywhere.  Help!  There are about 2 to 5 new .eml created every minute!

  TKS and best regards,

  LT

  Hi Lennet,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  Microsoft Exchange Server

  Hope the helps of information.

• IOM-Exchange Provisioning does not work after upgradation to 11.1.1.6.0

  Hi Experts,

  Need your help to solve the issue of implementation of the exchange connector.

  We upgraded the connector to the latest version 11.1.1.6.0 of 11.1.1.5.0 and applied the patch 18310438 for troubleshooting performance issues.

  After installation, exchange Setup does not work, the statistics remain in readiness, asking for your help to solve this problem.

  

  The newspaper of the server connector that we get the error
  
  DateTime = 2014-03-27 T 05: 09:43.0467023Z
  ConnectorServer.exe error: 0: System.TypeLoadException: could not load type 'System.Management.Automation.Runspaces.InitialSessionState' from assembly 'System.Management.Automation, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = 31bf3856ad364e35'.
  to Org.IdentityConnectors.Exchange.LocalRunspaceInstance.InitRunSpace (component snap snap)
  to Org.IdentityConnectors.Exchange.LocalRunspaceInstance... ctor (component snap snap, ConnectorMessages messageCatalog)
  at Org.IdentityConnectors.Exchange.RunspaceInstanceFactory.Create (ExchangeConfiguration config)
  at Org.IdentityConnectors.Exchange.Service.AbstractPowerShellService.CreateRunspace)
  to Org.IdentityConnectors.Exchange.Service.AbstractPowerShellService.Init (Configuration configuration)
  to Org.IdentityConnectors.Exchange.LocalRunspacePowershellImpl.Init (Configuration configuration)
  to Org.IdentityConnectors.Exchange.ExchangeConnector.Init (Configuration configuration)
  to Org.IdentityConnectors.Framework.Impl.Api.Local.ConnectorPoolManager.ConnectorPoolHandler.NewObject () in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocal.cs:line 108
  to Org.IdentityConnectors.Framework.Impl.Api.Local.ObjectPool'1.BorrowObjectNoTest () in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocal.cs:line 1041
  to Org.IdentityConnectors.Framework.Impl.Api.Local.ObjectPool'1.BorrowObject () in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocal.cs:line 981
  at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.ConnectorAPIOperationRunnerProxy.Invoke (object proxy, method MethodInfo, Object [] args) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\ApiLocalOperations.cs:line 178
  to ___proxy1. Schema()
  to Org.IdentityConnectors.Framework.Impl.Server.ConnectionProcessor.ProcessOperationRequest (request OperationRequest) in c:\ADE\aime_icf\icf\framework\dotnet\FrameworkInternal\Server.cs:line 609

  
  

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Details of the environment:

  
  

  1) IOM 11 GR 2 with BP 14 installed.

  2) Exchange 11.1.1.6.0 connector with patch 18310438

  
  Kind regards

  David
  

  Hello

  Error solved with the installation of the hotfix windows http://support.microsoft.com/kb/968930 on the connector server.

  Kind regards

  David

• If it is Possible to change the log for Exchange 2010 running on Esxi 5 drive

  Dear Experts,

  We are running exchange 2010 on Esxi 5, this Exchange 2010 has recently been installed and all the mailboxes have been transferred from exchange 2003 which was a physical server. At the time of migration in exchange 2010 we created newspapers drive 100 GB since big newspapers vmdk is generated when you migrate the mailboxes. As now migration is performed a few months back and now I observed for 2/3 weeks, the behavior of the reader of newspapers for a week only 5 GB is consumed in disk vmdk of newspapers, and that is also supplemented with a backup complete weekly to Exchange.

  I intend to ask, is that I think have newspaper vmdk 30GB instead of 100 GB, so the current of 100 GB of log reader, I can't reduce, but yes, I can create vdisk another to swap, but need advice if anyone has a similar experience to change the disk vmdk of newspapers for the Exchange? With this approach, I try to save 70 GB of storage space.

  I hope my question is clear.

  Waiting for your answers with the thoughts.

  Thank you

  Yes, you must stop the Exchange Services. But Exchange 2010 has a nice Wizard to do this, who can stop the database services, newspapers move automatically and back up the database.

  It is located under the Organization-> mailbox

  

  Leave the database, but only to change the path of the log file.

• Virtualization of Exchange 2003

  We are about to start (finally) virtualization of our systems.  One of these systems is a Standard Exchange 2003 on Windows 2003, using DAS server and serves about 600 boxes mailbox (if users concurrent max would be around 200 users).  Current physical area includes 3 disks, C, D and E.  C is for system D is application/newspapers and E is for banks to information (only 2 - public and private).

  After reading the various articles and best practices I came with a plan.  Could you get it someone please let me know if it is a good idea?

  In a test environment first of all (with DC operation), separated from the production network:

  Plan of P2V is the current physical Exchange box using VMware Converter Standalone.   Each physical disk would be converted to a virtual disk.  It will implement a SAN to shared storage iSCSI.  Thought create LUNS separate D and E drives, just don't know if this is necessary.  All Exchange and protection antiviruss services will be stopped during the P2V.  I tried to make a cold-clone, but don't know if I can due to the fact that we won't have a VMware enterprise license.

  Once that P2V is complete, power to the top of the new virtual machine.  Remove any vendor (HP Insight) specific applications and drivers.  Then, start the Exchange services and test.

  If successul, process document, repeat the test and before you run on the production system.  Once final, production VM is created, physical stop and turn on VM again.

  If you're ok with the unsupportability of the solution, then I say go ahead and virtualize it.  I still believe that deploying a new server and migrate the mailboxes are the cleanest way to do but to understand the limitations it.  All the more that I would recommend if you could back migration to Exchange 2010 rather than another server in 2003.  There is no direct upgrade from Exchange 2003 to 2013 path so you will need to go to Exchange 2010 in a first time in any case.  Might as well get ready now.

  Migration is easier because then you're not taking all issues with the server of your virtual infrastructure.  It is also pointless to worry about uninstalling the hardware drivers, of unnecessary software, etc.

  I had some success with P2V migration running on Exchange servers.  As I said earlier, you will have the best chance of success if you can organize the downtime to stop all of the Exchange during the P2V services.  That's how I managed in the past.

  Do your homework and understand what works best for you.  I'm sure you can succeed with two approaches.

  Good luck!  Feel free to come back and post how things went or if you need any help.

  Matt

  http://www.thelowercasew.com

• 11g Exchange Connector: error with 2003 mailbox databases

  Hello
  I installed 11g Exchange Connector in OIM 11 g R2 server. I ran successfully the work of "Exchange User Mailbox Database group search reconciliation" and the recon-ed a mailbox for a specific user account (mailbox Exchange 2010) by using the "target user reconciliation resource Exchange".
  
  But the fun stops there, when I try to run the work of 'Target resource Exchange remove user reconciliation', I get the following error (see #1) in the result. I have no new event in Event Viewer. When I check the connector server I see a similar error (see #2). I tried to manually run the powershell command with the user of the connector server and it works correctly (see #3).
  
  The problem seems to be related the Exchange 2003 mailboxes, since when I try to recon a box the mailbox for a user with a mailbox of 2003, I get a similar error of "database" could not be found Here again, if I check the same user using the service account, I can get his mailbox.
  
  No idea what could be the problem? All debugging more I can try?
  
  Thank you
  
  
  H4. #1-in the result of the scheduled task:
  org.identityconnectors.framework.common.exceptions.ConnectorException: problem when executing PowerShell Org.IdentityConnectors.Framework.Common.Exceptions.ConnectorException: could not find database "ELM COUR\Premier group of mailboxes (ELM COURT) stockage\Banque. Make sure that you have typed it correctly.
  to Org.IdentityConnectors.Exchange.RunSpaceInstance.CheckErrors (IList errors)
  to Org.IdentityConnectors.Exchange.RunSpaceInstance.InvokePipeline (Controls Collection 1)
  at Org.IdentityConnectors.Exchange.RunSpaceInstance.InvokePipeline (point of order)
  Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.InvokePipeline (command cmd)
  
  H4. #2-in the connector server log:
  30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeConnector, the-> CreateFilterTranslator method, the Message-> method entered
  30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> CreateFilterTranslator method, the Message-> method entered
  30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeConnector,-> ExecuteQuery method, Message-> method entered
  30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl,-> ExecuteQuery method, Message-> method entered
  30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeUtility,-> GetCommand method, the Message-> method entered
  30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeUtility,-> GetCommand method, the Message-> cmd poll Get-Mailbox
  30/05/2013 10:49:36 < INFORMATION >: class-> ExchangeUtility,-> GetCommand method, the Message-> output of the method
  30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> method entered
  30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> PowerShell command: Get-Mailbox
  30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> parameter: value IgnoreDefaultScope:
  30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> parameter: value ReadFromDomainController:
  30/05/2013 10:49:36 < INFORMATION >: class-> PowerShellExchangeServiceImpl, the-> InvokePipeline method, the Message-> parameter: value ResultSize: unlimited
  ConnectorServer.exe error: 0: Org.IdentityConnectors.Framework.Common.Exceptions.ConnectorException: problem when executing PowerShell Org.IdentityConnectors.Framework.Common.Exceptions.ConnectorException: could not find database "ELM COUR\Premier group of mailboxes (ELM COURT) stockage\Banque. Make sure that you have typed it correctly.
  
  to Org.IdentityConnectors.Exchange.RunSpaceInstance.CheckErrors (IList errors)
  to Org.IdentityConnectors.Exchange.RunSpaceInstance.InvokePipeline (Controls Collection 1)
  at Org.IdentityConnectors.Exchange.RunSpaceInstance.InvokePipeline (point of order)
  Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.InvokePipeline (command cmd)
  Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.InvokePipeline (command cmd)
  to Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.SearchUser (ObjectClass oclass, query string, Manager of ResultsHandler, OperationOptions options, ObjectClassInfo ocInfo)
  to Org.IdentityConnectors.Exchange.Service.Impl.PowerShellExchangeServiceImpl.ExecuteQuery (ObjectClass oclass, query string, Manager of ResultsHandler, OperationOptions options)
  to Org.IdentityConnectors.Exchange.ExchangeConnector.ExecuteQuery (ObjectClass oclass, query string, Manager of ResultsHandler, OperationOptions options)
  to Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.RawSearcherImpl'1.RawSearch (search for SearchOp 1, ObjectClass, filter oclass, Manager of ResultsHandler, OperationOptions options)
  to Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.RawSearcherImpl'1.RawSearch (object search, oclass ObjectClass, filter, ResultsHandler Manager, OperationOptions options)
  to Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.SearchImpl.Search (ObjectClass oclass, filter originalFilter, Manager of ResultsHandler, OperationOptions options)
  at Org.IdentityConnectors.Framework.Impl.Api.Local.Operations.ConnectorAPIOperationRunnerProxy.Invoke (object proxy, method MethodInfo, Object [] args)
  to ___proxy1. Search (ObjectClass, filter, ResultsHandler, OperationOptions)
  to Org.IdentityConnectors.Framework.Impl.Server.ConnectionProcessor.ProcessOperationRequest (OperationRequest request)
  
  DateTime = 2013-05-30 T 14: 49:37.1880494Z
  
  H4. #3-Powershell using the service account
  Get a 2003 database
  [PS] C:\Windows\System32 > Get-MailboxDatabase "ELM COUR\Premier group of mailboxes (ELM COURT) stockage\Banque.
  
  Name server recovery ReplicationType
  
  Store to the letter... Fake of the ELM COURT no
  
  
  Get a 2003 mailbox
  [PS] C:\Windows\System32 > Get-Mailbox-filter "DisplayName - eq 'Merchant Robert 0'"
  
  Name Alias ServerName ProhibitSendQuota
  
  marchanr marchanr Elm Court unlimited
  
  Published by: SG on May 30, 2013 11:57
  
  Published by: SG on May 30, 2013 13:41

  We have solved this problem: the service account was missing certain privileges of reading on the tree of Exchange 2003. We have added the 'read' and 'show info store' privileges on the tree of Exchange 2003, restarted the server connector and now it seems to work.

• Updated Adobe Exchange problem

  Hello, I can not update my Adobe Exchange Panel in InDesign.

  Hi Julie,.

  Adobe InDesign is not to support the Adobe Exchange website as an extension of InDesignCC2014 ownwards.

  Most of the Adobe Exchange services, have now been incorporated into browse Add ons that you can find in the submenu of Windows.

  Ideally Adobe Exchange does not exist in your windows--> menu Extensions, but you might have another Adobe product that makes it look at this place.

  So what has happened to you is somehow expected for further investigation on who caused this, may I ask what other Adobe products you have on your system?

  ~ Monica Singh

• Conversion error of an Exchange Server and a server files to 95%

  Hello

  I have problems when I am trying to convert an Exchange Server and a file server. Two of them are physical servers that I'm trying to convert an advanced vsphere ESX infrastructure. The problem is that when the conversion process reach 95% fail and sometimes it says that the physical server restarts. Is there a recommendation to convert and Exchange Server. Because I also convert a SQL Server, and I don't know what to do.

  I tell you that these conversions have tried to end the two server into production. Could this be the problem? I should stop all Microsoft Exchange services before you begin to convert the machine? Somewhere I found it is recommended all users to be disconnected from the server when you try to convert a machine, but I don't know if it's a suggestion or it is an institution. I thought that maybe the problem could be that the Exchange database cannot be suspended and that is because the process fails.

  Can someone help me with this problem? On the other hand, is there another application that is used to convert a physical machine in virtual? I only know the VMware Converter.

  Thank you.

  Warlock.

  While making the P2V conversion, it has always recommended to stop the services associated with the database, tools and application. This helps the conversion process ends without errors.

  Have you checked that the vmware converter logs, errors it gives while doing the conversion?

  For P2V conversion it is company known tool Platespin.Refer the link for more details below.

  http://www.PlateSpin.com/products/PowerConvert/

  Jay

  MCSE, VCP 310, VCP 410

  Review the allocation of points for "useful" or "right" answers.

• Satellite A300-1EH - where to find the key for Microsoft Works?

  Satellite A300-1EH

  My laptop has been repaired. Exchange service throughout the system. I have serious problem since then.
  The new version of Microsoft Works requires me 25 - the key of the product registration. I don't have him. Where can I get this version, the product key?

  It did not help me Microsoft or service. They sent me manufacturer...

  Hello!

  You have installed a newer version of Microsoft Works? Normally, you can only use the version preinstalled work and so you do not need a key. It s already active and ready to use.

  I think you use HARD drive recovery option to get a working dos version Works. :(

  Good bye

• Battery replacement - 884 cycles

  Hi all

  I have an iPhone 5 that I bought second hand in October 2013 and was first purchased between January and March 2013, is 3 years old now.

  In the past few months I've lived the bad life battery, with usage of 100% time - > 0% approximately 3 hours medium. I was once a few hours in a place where no service and my usage time of 100% to 0% was literally 2 h and 30 m. That's all!

  I use 4G and roaming all the time, and saw my Wi - Fi.

  I have run diagnostics with Apple and it seems as if my battery has passed their test. However, their test to determine whether faulty or not (this is what I understood of them at least).

  I just checked my battery status and he executed 884 cycles which AFAIK is a lot so far.

  My question is: would you recommend replacing the battery? It will make a huge difference?

  Thank you very much.

  sok777 wrote:

  Hi all

  I have an iPhone 5 that I bought second hand in October 2013 and was first purchased between January and March 2013, is 3 years old now.

  In the past few months I've lived the bad life battery, with usage of 100% time - > 0% approximately 3 hours medium. I was once a few hours in a place where no service and my usage time of 100% to 0% was literally 2 h and 30 m. That's all!

  I use 4G and roaming all the time, and saw my Wi - Fi.

  I have run diagnostics with Apple and it seems as if my battery has passed their test. However, their test to determine whether faulty or not (this is what I understood of them at least).

  I just checked my battery status and he executed 884 cycles which AFAIK is a lot so far.

  My question is: would you recommend replacing the battery? It will make a huge difference?

  Thank you very much.

  It is possible.  And you should be able to request the Exchange service of battery for $79, IIRC.

• Satellite U500-178 connection bluetooth Sony Ericsson W995 problem

  Hello

  The PC and the phone identify each other, but when you try to connect from the laptop, it appears with "Detection of service failed. The phone appears with a similar message appears if you try to connect from the phone.

  I've updated the software of the phone and the laptop is Toshiba Bluetooth Stack for Windows version 7.00.08 running.

  Bluetooth is enabled on both devices.

  Any ideas what the problem might be?

  Right-click on the Bluetooth system tray icon and select Options...
  Check in the general tab. ensure that the "Bluetooth Information Exchange Service" is enabled.

  Check in the Windows Device Manager if the COM ports, 15-19.

• Satellite A100: keyboard change - can I do it myself?

  Hi, just bought a satellite a book of notes-100 and at the same time ordered a QWERTY keyboard. Once I get it, I can install it on my mobile me or what I consider a dealer?
  Thank you

  It's the right question. Theoretically, you can do it alone but it is possible that the warranty will be voided, and in my opinion, it's too risky.

  I don't know how it is on the keyboard, but a few screws have a special type of tint on the screws and he brake if you try to remove the screw. Subsequently if you bring the laptop to the service they'll know you tried to open the only unit and the warranty is gone.

  Next important thing you need to know exactly how to remove the plastic above the keyboard. This plastic cover may be damaged by accident, and then you have just more problems.

  Keyboard Exchange service don t need more than 20 minutes and I think that it is better to visit service and let the technician to do it for you.