Execution plan will change if I use the variable binding instead of the literal value?

Similar Questions

• How to change the value of string clustered, to implement using the node value of property instead of writing directly on the flow of data or using the variable

  new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture.   No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.

  

  Hi GerdW

  Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases.  Now I want to insert user event by changing the control and influential cases during run time.

  As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well.  But then, I found there are a lot of screws that are using the string unbundle.  One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.

  I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.

  I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?

  Mant thanks!

  Minyi

• IPhone 7 will accept multiple fingerprints using the key ID?

  IPhone 7 will accept multiple fingerprints using the key ID?  If so, how?

  My iPhone 5 allows you to set up several fingerprints via settings > Touch ID & password, I doubt that the iPhone 7 would have fewer features.

  (I asked for your message to be moved to the forum from iPhone to help, do not know why you decided to post on the forum to help iPad.)

• The new MacBook with touch of force will be able to use the pencil to Apple?

  The new MacBook with Force Touch will be able to use the pencil to Apple?

  N ° of Apple pencil only works with iPad Pro (the iPad Pro is sold in two sizes).

  Use the pencil to Apple with iPad Pro - Apple Support

• In the bar when I write sth such as address: soccer, it leads to search results from yahoo? How do I will change it give me the results of google search?

  In the bar when I write sth for example to address: "soccer", it leads to search results from yahoo. How do I will change it give me the results of google search?

  Hi vavamvak,

  You should take a look at article in the database Search the Web from the address bar . It will show you how to change the default address bar search provider.

  Hope this helps!

• I want to use the Google toolbar. I installed of FF7. I will be able to use the toolbar again if I go back to FF4? If so, how to do that.

  I want to use the Google toolbar. I installed of FF7. I will be able to use the toolbar again if I go back to FF4? If so, how to do that.

  If my post has solved your problem, please click the 'Solved It' button next to my first post.

• Screen resolution/size changes when you use the touchpad

  Bought Probbok 4530 s. Win 7. I continue to have the screen/print resolutiom size change when you use the touch pad. The pointer seems to 'paste' and then when I move it, the screen get is much lower or higher. I continually have to type ctrl + or - to get the size of the screen back to the 'normal '. Is this something to do with the settings for the touchpad or pointer? Its driving me crazy...

  Bruce

  Hell, I think that this is it... Pinch Zoom! I have disabled that, as well as the "allow the theme change mouse pointers" on the pointers tab. I'm playing with it now, and it seems to have solved the problem. I'll let you know if this isn't... Thanks for the great help, Dragon fur!

• Foreground color does not change when I use the color picker.  CS6.

  Foreground color does not change when I use the color picker.  CS6.

  Your document is in grayscale, convert color (Image > Mode).

• I always use Macromedia Dreamweaver 4 for my Web site. The new CC Dreamweaver will be able to use the old traced or will I have to start over?

  I always use Macromedia Dreamweaver 4 for my Web site. The new CC Dreamweaver will be able to use the old traced or will I have to start over?

  CC of Dreamweaver is capable of handling any HTML page, regardless of where it was created. However, you might find that your existing code is not valid (it depends on how good your understanding of HTML is).

  Download the demo version and see how you rate. However, you should be warned that Dreamweaver CC is very different from DW 4.

• How many times can I use a variable binding in a query of the VO?

  Is it possible that I can use a variable binding in a query of VO just once?

  I test a query that keeps throwing the Houston-27122 error by pressing the application module tester. I tried to limit the problem to the simplest possible case, and it seems that the error is caused by the fact that I use the same variable bind two or more times.

  When the query looks like this:

  

  I have run, enter 'x' and it returns me the result.

  When I change to:

  

  I have run, enter the value

  

  and immediately get the error

  

  The same thing in sqlplus runs without problem:

  

  My version of JDev is build JDEVADF_11.1.1.9.0_GENERIC_150314.0718.6673

  Please, advise.

  P. S. where can I find documentation queries are supported in your? In particular, I'm interested if I can use WITH the clause. There seems to be some confusion on this matter (see, for example, Oracle SQL WITH clause support - JDeveloper and ADF)

  Thank you.

  It depends on:

  Open your VO in JDev and go the the query page.

  In the lower part, there is a drop down 'link type', it is usually set to "JDBC-positional. In this case, you will need to provide the bind value for each occurrence of the variable binding separately.

  You could change that to "named" (don't remember the exact name). But beware, this will also affect all relatioships master retail to others your. I think that this is not a good idea to change the style of binding to a single VO.

  Good bye

  DPT

• Use the return value to do step digital multiple success or failure

  Hello

  I use a multiple digital step to check several measurements by an external DMM through a function created in CVI.  I would like to use the return value of the function to replace the global status of the step. The reason is that the return value indicates a communication error, while steps are being taken, and which would lead to a "fake" fake or false 'Pass '.

  What I would do is more or less this >

  If the return value is 0, then check if the measuremets are between the limits

  If return value! 0 = there was a communication error so step continues to operate independently of the measure.

  I tried combining multiple digital step with a step of pass/fail, but it does not work.

  I also trie to change the expression of the status of the multiple digital steps but basically ignores him.

  Any ideas?

  Thank you

  Javier

  Why don't you just make that return the value limits for multiple numerical limit stage.  Comparison of the EQ value and the low limit to 0.

  That would make the most sense.

• kindly tell how to use the unique value of a table with the index 0

  kindly tell how to use the unique value of a table with the index 0

  Hi
  
   
  
  Yep, use Index Array as Gerd says. Also, using the context help ( + h) and looking through the array palette will help you get an understanding of what each VI does.
  
   
  
  This is fundamental LabVIEW stuff, perhaps you'd be better spending some time going through the basics.
  
   
  
  -CC
  

• Application of interactive report of apEx using the last value of the point

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  
  

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  
  

  Thanks for any help you can offer
  

  S.Bovin wrote:

  My interactive report is based on a field, but the value of the field is not applied when executing the query

  SELECT *.

  MyTable FROM A

  where A.registration_year =: REGISTRATION_YEAR_ITEM

  I created an item in the page REGISTRATION_YEAR_ITEM

  When I run the query, I want the user to type in a year, and then run the query and display the corresponding results.

  The query always seems to use the default value of points instead of the current value

  How can I do use the value of the current field?

  Add the REGISTRATION_YEAR_ITEM to the IR Page elements to submit property. He will submit the current value in session state.

  Why bother with the page element at all? Why users can't create just an IR filter?

  I also tried the V method, but produce the same results

  where A.registration_year = v('REGISTRATION_YEAR_ITEM')

  For performance reasons, use bind variable notation when you reference values from session state in SQL queries.

  The environment is ApEx 312, 10.2.0.4 database

  Unfortunately, the upgrade is not an option

  Why not? That it will provide you with a safe and supported environment and your users with a much better life.

• The number of characters is allowed when we use the ' have value in ' option when you create a filter?

  The number of characters is allowed when you use the option "value in" when you create a filter?

  Hey,.

  300 characters are allowed when we use the option "value in" everything by creating a filter.

  Thank you

• Examples on how to use the external value of the vro

  I'm trying to use the 'external value' VRA 7 feature to get data for a property definition.  Examples or guides?   I have a quick action that returns the string, but I get this error

  

  Figured it out... the exit on the action must be array/string...

  now working to reproduce the relantionships parent on custom properties that not available in version 7