Exit delay

Similar Questions

• Research in the string token.

  Hello world

  I was wondering if there is any VI that makes the function of finds a particular substring in a string and a Boolean value (True / False) as output. If found, to give a real. Cannot be found, give a fake.

  Thank you! ~

  You will not receive directly a BOOLEAN output, but for those kinds of requirements, there are different functions available and each of these functions is called 'Delay of game' (or 'offset last game' in some functions).

  Now based on the requirement, you can select any one of the following:

  1. chain of research/Split: (easiest and fastest function)

  

  2. model of correspondence: (powerful and slower)

  

  3. regular expression matching: (most powerful and slower)

  

  Now, when you use any of these functions if this particular exit 'Delay of game' (or 'offset last game' in certain functions) gives '-1' (negative 1), this means that the substring (token) is not found in the main chain, so a simple check will give you, your desired features.»

• 2.6 LMS backup fails with strange error message

  Backups on my LMS server fails with a message that makes no sense to me:

  / cygdrive/d/CSCOpx/bin/tar: /CSCOpx/campus/etc/cwsi/DeviceDiscovery.properties: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: /CSCOpx/campus/etc/cwsi/ANIServer.properties: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: /CSCOpx/campus/etc/cwsi/discoverysnmp.conf: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: /CSCOpx/campus/etc/cwsi/datacollectionsnmp.conf: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: /CSCOpx/campus/etc/cwsi/Snmpv3EngineParam.txt: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: /CSCOpx/campus/etc/cwsi/UTSnmpv3EngineParam.txt: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: / CSCOpx/campus/etc/cwsi/users: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: / CSCOpx/campus/etc/cwsi/archives: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: / CSCOpx/campus/etc/users: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: / CSCOpx/campus/etc/cwsi/ReportArchives: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: / CSCOpx/htdocs/campus/maps: cannot stat: no such file or directory

  / cygdrive/d/CSCOpx/bin/tar: exit delayed from previous error messages error

  Error (686): failed to create or save tar file. Backup cancelled. Make sure you have write access to this directory.

  Backup failed: 2008-03-17 04:40:50

  Does this mean that tar has problems reading the files and directories (they are all there) or actually implies that the permissions on d:\backupdir to get messed up?

  ARO

  Olof

  This means that you have another request for Cygwin installed on this machine, and it interferes with the backup. You will need to remove the apps like OpenSSH from the server and make sure that the following registry key is empty:

  HKLM/Software/Cygnus Solutions / Cygwin / mounts v2

• Why $ORACLE_HOME has privileged root folders?

  Hello world

  Why $ORACLE_HOME has privileged root folders?

  records $ORACLE_HOME for 10g

  $ tar - czf /u04/bkp/orclhome_bkp.tar.gz db_1.

  tar: db_1/bin/nmb: cannot open: permission denied

  tar: db_1/bin/NBM: cannot open: permission denied

  tar: exit delayed from previous error messages error

  $ ls-l /u02/app/oracle/product/10.2.0/db_1/bin nm *.

  -rws - x - 1 root oinstall 18598 Jul 17 03:21 nmb

  -rwxr-xr-x 1 oracle oinstall 18598 Jul 17 03:21 nmb.0

  -rwxr-xr-x 1 oracle oinstall 50310 nmcbufp April 13, 2010

  -rwxr-xr-x 1 oracle oinstall 811388 Jul 17 03:22 nmccollector

  -rwxr-xr-x 1 oracle oinstall 811376 April 13, 2010 nmccollector0

  -rwxr-xr-x 1 oracle oinstall 101161 Jul 17 03:21 MIEC

  -rwxr-xr-x 1 oracle oinstall 0 nmei0 of May 19, 2004

  -rws - x - 1 root oinstall 19828 Jul 17 03:21 nmo

  -rwxr-xr-x 1 oracle oinstall 19828 Jul 17 03:21 nmo.0

  -rwxr-xr-x 1 oracle oinstall 72082 Jul 17 03:21 nmocat

  -rwxr-xr-x 1 oracle oinstall 0 nmocat0 of May 19, 2004

  -rwxr-xr-x 1 oracle oinstall 75190 Jul 17 03:21 nmupm

  -rwxr-xr-x 1 oracle oinstall 0 nmupm0 of May 19, 2004

  -rwxr-xr-x 1 oracle oinstall 77251 Jul 17 03:21 NMU

  -rwxr-xr-x 1 oracle oinstall 0 nmus0 of May 19, 2004

  Thanks in advance.
  

  Hello GTS (DBA).

  As far as I KNOW, these files are used by EM (Business Manager), because it needs OS information is available and that information can be given by root only so the owner of these files are the root and the sticky bit is also active.

  If you try to change the property of root and oracle as the owner of some features, requiring root privileges, may not work.

  I tried once to change the ownership of the file $ORACLE_HOME/bin/oradism (it was owned by root earlier, I changed the owner to oracle) and the alert log has been flooded with error -.

  WARNING: -------------------------------

  WARNING: oradism did not set up correctly.

  the permission must be

  -rwsr-x - 1 root root 1340408 Nov 17 23:05 oradism

  This is done internally when we run the root.sh script.

  Kind regards

  Hemant

• Premiere Pro CS4 feature Questions

  Hey everybody,

  I was thrown in a project that is using Premiere Pro CS4 (we use Roxio VideoWave) and I hope someone can answer a few basic questions (I'm not an expert in the field of the video editing software):

  (1) in the wave of the video, I can easily add photos and movies to a project simply by drag-and - drop from Windows Explorer. First, it seems, the only way I can add photos and videos to a project is to import media, and then drag them from the 'library of project' to the timeline. Is it possible to drag-and - drop a photo directly from Windows Explorer in a timeline? If so, please tell me what stage of base, Miss. :-)

  (2) is it possible to get a glimpse of what will look like a transition before adding to made the transition to film?

  (3) when I add a photo/video library project, I have to hold the CTRL key to have a 'ripple' Insert (for example, push everything into the exit delay). Also, I have to hold the CTRL key to make a 'ripple trim. Is it possible to define these actions by default, so I don't have to hold down the CTRL key for these?

  (4) Lastly (for the moment :-)), in Roxio Videowave I could easily change the volume of an audio clip in the timeline just by clicking on the average line goes through the sound wave and dragging upwards or downwards.) I can't know if there is a similar average easy to do in Premiere Pro.

  Any help is appreciated! Again, sorry if these are basic stupid questions, but the first is currently well above my level of experience.

  Thank you! :-)

  (1) is there a way to drag and drop a photo directly from Windows Explorer in a timeline?

  First, no, it does not - at least since the Explorer himself. You must first import the files (you can drag and drop them in the Panel project/bin) and then edit them in sequence. However, you can try on the media browser; go to window > Media Browser so you don't see it. Media browser will give you an interface of type Explorer that you can use to drag files directly from the folder structure on your hard drive in a sequence; When you do so, they will simultaneously be imported into the project.

  (2) is it possible to get a glimpse of what will look like a transition before adding to made the transition to film?

  Nope; Just try them until you find one you like. Then memorize

  (3) when I add a photo/video library project, I have to hold the CTRL key to have a 'ripple' Insert (for example, push everything into the exit delay). Also, I have to hold the CTRL key to make a 'ripple trim. Is it possible to define these actions by default, so I don't have to hold down the CTRL key for these?

  Nope; those who are wired. It will become automatic for you after a while.

  (4) Lastly (for the moment :-)), in Roxio Videowave I could easily change the volume of an audio clip in the timeline just by clicking on the average line goes through the sound wave and dragging upwards or downwards.) I can't know if there is a similar average easy to do in Premiere Pro.

  You probably don't have the volume adjustments or keyframe activated for your track. Check out the following screenshot:

  

  You can select "Show clip keyframes" (which lets you keyframe other effects via the menu drop-down on the clip) or "Show Clip Volume" that shows just the volume effect. A yellow line appears through the waveform; You can drag up and down to adjust the total volume of a clip, or use the control key and click the rubberband to add nodes or key images so that you can increase the audio. You can also control click a keyframe to germinate the handles so that you ease in or ease the level. Note that you can also select the 'Track' options, but (as his name suggests) to set the level of the entire track and not individual clips.

• How to exit while loop with delay schedule?

  I have a pretty heavy program that iteratively takes a series of measures from a number of channels using a variety OR-Switch and OR-DMM screws that I assembled as a result of various examples and several help pages. Each channel is sampled once during each iteration with data to be saved in a text file for later analysis, after it is imported into Excel. I added to the screen 'real time' indicators and charts to see what looks like running data.

  Each iteration is performed using a While loop with a delay timer, even if a previous version, I used a timed loop. Measures for the series of channels are collected with a loop For inside the While loop. The loop For includes screws which:

  1 cut the channel and wait as debounce.

  2 Initializes the DMM and passes the configuration information.

  3. wait for a while to make sure that the DMM is set.

  4. measure.

  5. close the DMM.

  6 disconnect all the switches.

  The terms of the election of the channels is ends in 15-20 seconds and I am currently collecting data every two minutes, so he spends "wait" time "collection". Each iteration of the loop For initializes and closes the DMM to avoid the hot switch.

  Other components of the program are configuration setting controls, etc. (in front of the While loop), a "current measurement" indicator and a writing-text inside the loop file operation For, several indicators of the iteration (inside the While loop, but outside the loop For) and a bunch of operations related to the grouping and table that provide graphics of groups of time vs measures.

  I don't know there are more elegant ways to perform many functions that I do and I'm not posting the VI here because I want to concentrate on what I know, it's a big problem with my program (for now!) - I can't figure out how to get out of the While loop. I tried the combinations of Boolean control, its conditions of latch and Stop / continuous if true to nothing does not.

  I want a 'Stop' button that ends the While loop, at the next opportunity, but it is not working properly, I think, because the stop button does not play with good timing, because the program runs either the loop For or the time delay at the beginning of the While loop. 'Next opportunity' can mean 'Immediately', 'at the end of the next iteration of the loop,"or"at the end of the next delay schedule." I think that if I get one of these scenarios to work, I can get an any of them to work!

  Help, please!

  
  

• Force the While loop to exit when the delay is running

  Hello guys,.

  I have a While loop containing some jobs. One of them is delay for 10 seconds. When I push the stop button, the loop does not stop immediately. Instead, it stops after a few seconds (can be, pending other jobs is done).

  What can I do if I want to stop the loop immediately after I press the stop button?

  Thank you for sharing...

  Hello Yoppy,

  I don't know if I understand your problem completely, but here's the method I use to stop the while loop immediately (some ms delay will be there for you).

  I would like to know if the attachment helps.

  There are several ways to do it and you can get better solutions than this one on this community.

• delay 10s ~ when clicking on links before loading starts

  I have a delay of 10 seconds after clicking on links before loading starts. On some sites, it's worse than on others, the worst being on reddit.com. I tried to reset firefox but that did not help. Thanks in advance for any help.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).

  (If you are using an additional theme, place you in default theme.)

  If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:

  

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you.

• Prospects for delay of Pinwheel MAC v15.21

  Apple MACBook Pro OSx El Capitan v10.11.4.  2.8 i7 Nvidia GeForce g chip.

  Since the last version 15.21 MacOffice update (160405).  The MACOutlook APP stalls sometimes when entering an email.  The wheel will start spinning and on several crashes of times, forcing me to "file/exit".  Did someone else who publishes with the Outlook application since the last update?  What are some of the possible causes of delayed typing?

  Adam (apexadam)

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• How can I turn on/off and exit full-screen Mode?

  As stated in my previous announcement on July 3, the only way I could see the view full screen of my Hotmail "Compose" mode was to reload the Hotmail Web page or enter full screen Mode. Now how to exit full-screen mode, because I lost all the headers of windows and toolbars. (NOTE: I use a resolution of 1024 x 768) I have to go to higher resolution before the return of the mode full screen? Reboot may keep the settings that I don't want.) I apologize if this is not not to be a Firefox problem after all.

  Sounds like something that you could simply add to your previous post, expected rather than we could find your previous post and working on a new response.

  And then if you just repeat what you read before you won't like the answer better than before. If you have a web page specific are you a bit more of one problem than the other also can help.

  Mode full-screen:

  • Toggle in and out with F11
  • Toggle to display-'Alt + V' menu > F (full screen)
  • While in the switch from full-screen and hold the mouse at the top of the window - whatever it is that you would do before can be done full screen as long as you stay in height in the toolbars. Including as noted recently Cor - el (hope it wasn't yours), you can press the "Maximize" button, then the button "restore".

  I can do the same thing on Hotmail, the special thing is that there is a delay, and he likes to show my top full Office between the two. I am running Windows 7.

• Command delay AppleScript in display-asleep

  Hello

  I would look for a way to run a script at midnight - NOT on a calendar. For example, I want to do the following:

  delay 10000 -- assuming 10000 seconds to midnight

  activate the application "Notes".

  tell application "System Events" to keystroke "Test"

  The problem is that when my display sleep (the computer is not sleep), the delay control is stuck. Any help is greatly appreciated. Thank you!

  Are you really sure you want to exit a script running & hope that it will work?

  Personally I would forget about the timer, set the script to be triggered by a calendar event instead.

  1. Save the script as an Application in the Applescript Editor.
  2. Add an event to the time you want in the calendars, set an alert, with "Open File at the time", choose custom: & add your script.

  I think that the calendar will be reliable Mac hoping moe keeps the running script, it can wake the Mac - I test only.

  Calendars also makes it very easy to reschedule.

• Delays in DAQmxWriteRaw when you use several cards PXI-6733

  Application:
  I have an application that generates and writes the analog data at 300 kHz slightly underneath.  Data generation and output take place every 14 ms (we'll call it who a 'block',) through an event EveryNSamples leave a timing sheet.  In each block, 4000 samples of analog data are generated and output to 6 of the 8 channels of analog output of the PXI-6733.  The output buffer is set to twice the block 4000 writing samples and pre-filled with 4000 zeros, so the output is always a block behind the data generated.  If a single block exceeds 14ms to generate and write on the analog samples, the output buffer will be against the wall and exit stop (regeneration is disabled.)  I recently needed to add more than 10 output channels, so I installed a second PXI-6733 map in the chassis and set up a second analog output task to write the second map.

  Problem:
  As analog data are generated on demand in each block of 14 ms, the program cannot take more than 14ms to generate the data and write them on the cards, otherwise we will underflow analog output.  Thus, any unwanted delay must be avoided.  Data generation stage does not take very long (in my test it is off and decision< 1ms,)="" but="" i'm="" seeing="" some="" problems="" when="" i="" write="" the="" data="" to="" the="" pxi="" cards. ="" i'm="" using="" the="" daqmxwriteraw="" function="" to="" write="" the="" samples="" to="" the="" cards. ="" the="" function="" is="" being="" called="" twice="" every="" update="" loop:="" once="" for="" each="" output="" task="" (card). ="" when="" i="" added="" the="" second="" card,="" i="" noticed="" that="" occasionally="" the="" call="" to="" daqmxwriteraw="" would="" take="" much="" longer="" than="" 14ms,="" causing="" buffer="" underrun="" errors="" (-200016)="" on="" the="" second="" card,="" or="" regeneration="" errors="" (-200290)="" on="" the="" first="" card. ="" i="" inserted="" timing="" markers="" around="" each="" call="" to="" daqmxwriteraw,="" and="" i="" see="" that="" normally="" the="" calls="" each="" take="" around="" 4.8e-5="" seconds="" to="" complete="" on="" card="" 1="" (whether="" alone="" or="" in="" conjunction="" with="" card="" 2). ="" on="" card="" 2,="" the="" calls="" take="" usually="" take="" about="" 4.8e-5="" seconds="" to="" complete,="" but="" they="" occasionally="" spike="" to="" between="" 5="" and="" 40ms="" (e.g.="" 6="" out="" of="" 300="">

  I wonder what would cause these erratic spikes in time it takes to DAQmxWriteRaw BIE called on the second card.  Is there a known issue with the help of 2 PXI - 6733 s in the same PXI chassis?  Could there be some sort of conflict of resources (not enough channels DMA, etc?)  The two report cards they have in DMA mode, and fill FIFO priority is set to NotEmpty.  The problem also occurs when the transfer mechanism is set to interruptions.

  Other Observations:
  I noticed the first edge of calendar corresponds to the point in the program to the location of loading the dll "nicesru.dll."  I can't find any information that features in this dll, and I don't know if it's a symptom or a cause.

  I also noticed that when an error occurs, I can't seem to stop and clear the tasks of production.  After trying to stop it and cancel all active jobs, keeps blinking the link on the PXI chassis light.  To reset, the only way is to go into solution of measurement and Automation Explorer and reset the second card 6733 manually (or use ResetDevice C calling).  There seems to be only the second PXI-6733, and it also happens when using the test panels in the MAX program.

  Material:
  PXI chassis, 1033
  1 x card synchronization PXI-6608
  2 PXI-6733 analog output cards x
  1 x card PXI-8461 CAN
  PXI, PCIe - 8361 I / map F

  Dell Precision T7600
  E5-2687W CPU Xeon

  Software:
  Windows XP SP3 32-bit
  NOR-DAQmx 9.0.2
  Visual Studio 2008 sp1

  I was able to solve the problem by moving the PCIe card in the PC to another location.  I assumed the problem was with how bus PCIe are managed by the motherboard, or how the resources have been allocated to the cards in this particular niche.  Move the map on the slot 16 second x on the motherboard seems to have solved my schedule delays.

• Delay of Subscriber notification followed Winlogon 0x800705b4 after installing MS Office 2010

  My PC Windows 7 Professional x 64 now takes a long time to start. I see a screen "Configuring Updates" which remains at 0%, followed by "failed to configure.

  The logs show a second delay 300 as follows:

  -L' subscribed to winlogon notifications took 300 second (s) to handle the notification event (CreateSession).

  So my updates pending show as follows:

  -Installation failure: Windows failed to install the following update with error 0x800705b4: update to the list of compatibility view Internet Explorer 8 for Windows 7 for x 64-based systems (KB2447568).

  Even for updates KB2284742, KB2388210, andKB2249857

  This started happening when I installed Microsoft Office 2010 (download HUP).

  Suggestions?

  Error_Timeout 0x800705B4

  From: you can encounter errors related to the connection of temporary when you use Windows Update or Microsoft Update to install updates

  First see if there is a proxy server used by the security software installed by following the steps for Windows 7 Sub
  Method tip B: remove the entry from the WinHTTP proxy configuration proxy server.

  Netsh winhttp show proxy from a command prompt displays Direct access , type exit and then press enter at the command prompt to close.
  Otherwise type netsh winhttp reset proxy , and then press ENTER to remove the proxy, then type exit, press ENTER to close the command prompt.

  If a proxy server is not the question...

  We use a 3rd party firewall? If the answer is Yes, then suggest you set up boot system, restart the system and make sure that the native firewall of Windows 7 is now on by opening the Windows Firewall in Control Panel (click on the view by: link and set it to small icons to be able to access the Windows Firewall), then see if the updates install now.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If the updates install or not, Cancel now clean boot configuration and restart the system once more.

  If updates are always not to install please copy & paste the last lines of 50 or more WindowsUpdate.log in your response.
  How to read the Windowsupdate.log file

  Expert MowGreen Windows IT Pro - consumer safety

• How to delay and trigger output for redeclenchables DAQ

  I make redeclenchables data acquisition based on the technique described here and that my departure point couple year I used joint comes with LabVIEW example.

  What I realize now is also already done that I need to delay the recognized outbreak and output as a trigger for any other device signal.

  How to make a simple diagram:
  Trigger is recognized-> DAQ [which works perfect already more than a year]
  -> wait 100ms-> exit the trigger [to be added]

  Using Windows XP edition family, NI PCI 6110

  I thank you in advance to anyone interested

  
  

• Apply real-time: delay is ignored

  Hello

  I am trying to set up a standby database can be found in paragraph 12.1, but apply in time is always activate.

  Of the primary database, I always see in the alert.log:

  WARNING: Managed Standby recovery started by APPLYING in TIME REAL

  DELAY of 60 minutes ignored elementary

  Same database alert.log emergency exit:

  Managed Standby recovery started by APPLYING in TIME REAL

  Specified previously ignorant DELAY 60 minutes for the sequence of thread 1 169

  Archived newspapers is copied on standby but applied immediately. Delay of log_archive_dest_2 is ignored. Why?

  Primary DB:

  Select the id dest_id, database_mode db_mode, recovery_mode,.

  protection_mode, standby_logfile_count 'litigants. "

  ACTIVE standby_logfile_active,

  archived_seq #.

  v $ archive_dest_status;

  ID DB_MODE RECOVERY_MODE PROTECTION_MODE ACTIVE ARCHIVED_SEQ LAR #.

  --- --------------- ----------------------- -------------------- ---- ------ -------------

  1 OPEN 0 0 169 IDLE MAXIMUM PERFORMANCE

  2 RISE-STANDBY MANAGED IN TIME REAL IS APPLIES TO MAXIMUM PERFORMANCE 4 0 169

  Specific parameters are:

  log_archive_config DG_CONFIG = (JFDG, JFDG_SB)

  LOG_ARCHIVE_DEST_2 SERVICE = JFDG_SB ARCH ASYNC DELAY = 60 VALID_FOR = (ALL_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME = JFDG_SB

  LOG_ARCHIVE_DEST_STATE_2 ENABLE

  standby_file_management AUTO

  I restarted standby db with

  ALTER DATABASE RECOVER MANAGED STANDBY BASE DISCONNECT FROM THE SESSION.

  or

  recover the parallel managed standby database disconnect 2;

  = > same result

  How can I use a delay of application of archived log?

  The version of the database is:

  Patch 20831110: applied on Thu Sep 24 09:55:04 CEST 2015

  Patch ID: 18977826

  Patch description: "Set update database: 12.1.0.2.4 (20831110).

  Operating system: Redhat 64 x 6.6 (2.6.32 - 504.el6.x86_64)

  Hello

  1. oracle docs: https://docs.oracle.com/database/121/SBYDB/release_changes.htm#SBYDB5408

  Apply specific features to redo

  • The USING CURRENT LOGFILE article is is no longer required to start real-time applies.
  • To physical databases ensure, issue the ALTER DATABASE RECOVER MANAGED STANDBY DATABASE statement. (From the Oracle 12 c Release 1 database (12.1), the USING CURRENT LOGFILE article is obsolete and is no longer necessary to start real-time applies.) (doc: https://docs.oracle.com/database/121/SBYDB/log_apply.htm#SBYDB0050)

  2. entry delay (real-time applies to will does not provide the option, his conflict with your apply requirement)

  Doc: https://docs.oracle.com/database/121/SBYDB/log_apply.htm#SBYDB4762

  Note:

  If you set a deadline for a destination which in real time is activated, delay is ignored. If you set a delay as described in the following paragraph, then you must start the application using the NEWSPAPER ARCHIVE in the HELP file

  clause contained in Section 8.3.1

  .

  3 doc:https://docs.oracle.com/database/121/SQLRF/statements_1006.htm#SQLRF00802

  https://docs.Oracle.com/database/121/SQLRF/statements_1006.htm#BGECJDHB

  Note:

  Beginning with the Oracle 12 c database

  real-time applies

  is enabled by default in the course from the redo apply. Real-time apply redo retrieves waiting for redo log files as soon as they are written, without having to check in all first to the physical database ensures. You can disable real-time apply, with the USING ARCHIVED LOGFILE clause. Refer to:

  It may be useful

  Every bit of information is covered in Oracle docs, spare some time for learning.

  -Pavan Kumar N