Expand the Perc 5i Raid1

Hello friends,

Small question I have a PE1950 with Perc 5i and two 73 GB drives.

In the other, I have 2 300 GB drive, I would like to broaden my array of 73 GB, 300 GB

What is the correct there?

I already tried once, by removing the disks one by one, but the size of my virtual drive is still 69GB

How to I develop, no the OMSA availabke option?

Need help

Thank you all: bravohelen:


Tags: Dell Servers

Similar Questions

  • expand the search bar window

    Hello, I expected expand the search bar and shrink the address bar. When I fly over the gap between the 2. the cursor will change and I can resize about 1 "altogether. The maximum size of the window of research being 11 characters.

    To be more concise. I hope that search suggestions, be posted more comepletely. For an easier view of them.

    Alternatively, you can choose to move the search bar 'bar 3' Firefox menu button in the drop-down list by right-clicking on search engine (Menu move) or via the mode icon customize.

    The DOM Inspector shows that the search container has two rule to set the minimum width:

    • min-width: calc (54px + 11hp);
    • min-width: 25ch.

    You need to replace this minimum to help reduce the search beyond this minimum bar.

    #search-container {
      min-width: 10ch !important;
    }
    • chrome://browser/content/browser.CSS
    • chrome://browser/skin/browser.CSS
  • Cannot expand the list of media in iMovie for Mac

    When you aye in the Multimedia show, you cannot expand the list box of the media on the left of the screen. Is this a bug? Thks

    Try dragging the lower left corner of the window to the left. Which somewhat widens the sidebar:

    I have to make the window larger than the screen iMovie to make the sidebar wider:

  • New AOL e-mail: one quarter of the screen is blank on the right side, reducing the space for the e-mail subject line. Resize attempts do not work on the right side, so I can't expand the e-mail subject line

    The new AOL E-mail look, which yesterday began a quarter of the screen is blank on the right side, thus reducing the space for the e-mail subject line, which limits its usefulness. Resize attempts do not work on the right side, so I can't expand the e-mail subject line? Running XP pro and Mozilla Firefox 5. No problem with I.E.

    Thank you, these settings were already in place. AOL said now erase the cache, cookies and history... to solve, which worked. (I deleted the cache and a story time.)

  • Expand the overall police?

    El Capitan v 10.11.4, how/where can I that I expanded the general representation of the font?

    Thank you!

    Goto System Preferences, then select display, then select display, then select chipped, then select a setting that is right for you.

    The lower numbers are a larger text size.

  • expand the category drop-down list table in the model of checkbook

    Using version 2.3 of numbers 09.  Try to understand the model section for checkbook and to expand the available categories in the menu drop-down allows to assign a category to an entry in the checkbook.  Where would we go to learn this procedure.

    Hi Robert,.

    This is as good one place as any.

    If you have started using the model and have defined categories for all operations, make changes to the cells in these rows. Fill the pop-up menu edited cells wil also reset the value of each cell filled to the currently selected value in the source cell to this filling.

    Add new categories to a cell in the context menu

    In the Transactions table, click any cell to the row and column reference tabs appear.

    Line control grip (red arrow in the image below) and drag to the bottom to add a new line. The new line will contain a new copy of the cell from the popup menu in the category column. Click this cell to select it.

    In the bar of buttons above the workspace, click the Inspector button to open the Inspector, and then click the format cell [42] button to go to the cell format Inspector.

    You will see the list of the menu items for the selected cell. The list below are a pair of buttons marked + and - (blue arrow). To add a new item to the menu, click on the button +.

    The new item appears at the bottom it has the list, with its highlighted text as shown. Type the new category name.

    Repeat for as many new features that you need.

    You can also edit the items already in the list.

    Double-click an existing item to select the text. Type the new name for the item.

    When you are finished, close the Inspector.

    The menu changes are applied immediately and affect only the menu in the modified cell, and cells, this version of the menu is filled in. If you add a new line to the bottom of the table, for example, the edition menu of line 15 will be filled in the new line.

    Add a new category to the account categories table

    The new category is not automatically added to the category table account. When you add it, ensure that there is an exact match between the label of the table and the category in the menu.

    Click any cell in the account categories table to select it.

    Enter the line control handle and drag down to add as many lines as necessary.

    Note that the totals in a footer line moves down and the new lines are added above it.

    Fill in the new lines of the new category (or categories). *

    If you have completed transactions for these categories, these will be totaled in the B column and adds the total in the footer line, but not yet appear on the pie chart.

    Add the new categories on the pie chart

    Click the pie chart to select it and show its data source.

    Data for the graph comes from the cells defined by the selection (in blue) rectangle. The cells shown in white on a background come from the chart legend labels black in column A of the table in the colors of the wedge can be seen in the box beside the category name (and can be changed by clicking on the box, and then choosing a new color in the fill color in the toolbar).

    To add the new category to the table, place the mouse pointer on the small handful (circle in the lower right corner of the selection rectangle. When the pointer changes into a Black plus sign, click and drag down to lock the new categories, which will be instantly assigned a color and added to the graph.

    Click anywhere outside the objects onscreen to deselect all objects, and then save your work.

    * To ensure matched spelling between the menus and the list of categories, select one of the new cells of menu and copy. Select one (or all) cells new category on the table of the types of accounts and paste. Specify each menu to the new categories, and then select all the cells in the new category. In the format of cell Inspector, use the context menu to change the format of these cells to the text. This removes the attribute from popup menu of the cells, leave the text as it was when the last value.

    Kind regards

    Barry

  • Equium L20 - 198 expand the RAM

    Equium L20 daughter - 198 has the factory supplied 512 MB RAM installed 2rx16 PC2. I want to expand the memory to see if it improves performance with programs like MSN which seem to be grinding to a halt and freeze enough frequently. After looking on the Toshiba site for compatible memory, I couldn't find - is there any compatible RAM available? If so who?

    Thank you

    Hello

    Your laptop can handle with 2 GB of RAM max.
    If you want to add 512 MB RAM compatible a part PA3412U - 1 M 51 number module. With 1 GB of RAM of your Satellite will work perfectly.

    You want to use more than 1 GB of RAM?

  • Impossible to expand the C partition after the reduction of the DATA Partition

    I dropped my DATA partition to increase the size of my partition Vista (c), but I can't extend C: (as far I understand it) because it is more than a single partition to the right.

    I can reformat the free space and I have another partition, but I would rather extend C:
    Is there a way to do this?

    Also, I wrote my recovery disks, but the DATA partition again should he be there? Also if you do not delete the DATA partition and that do it again you?

    Thanks in advance.

    Hello

    The problem is that your data partition was created after the C partition.

    If you reduce a partition, the free space appears after the shrivelled partition and so you can not add this free space to the other partition of C that is placed behind the partition Data (D).

    The only way to expand the C partition is to delete the partition D and then to add this free space to the C partition, but I wouldn't delete the DATA partition because it has a record of recovery that is necessary to create the Toshiba Recovery DVD

    But if you have already created a Toshiba Recovery DVD then the deletion of the DATA partition is not a serious problem because the Toshiba Recovery disk would format the whole HARD drive and would create 3 new partitions (hidden WinRE partition, partition C system, DATA partition).

  • cannot expand the c partition in unallocated space

    I have a HP Pavilion dv5224nr laptop running Windows XP.  I've been low on disk space, so I came on this forum to find out how to remove the recovery partition, since I have the recovery CD from HP.  Now that I deleted the partition through disk management, it only allows me to expand the C partition in unallocated space left by removing the partition D.  "Extend partition" is not an option in the menu when I right click.  I also tried going through the "diskpart" command prompt, select the volume and him asking to "extend".  I received a message that it was unable to extend the volume.  How can I recover the 12 GB of space on my C drive?  Thank you.

    I downloaded a free utility called Easeus Partition Master and it worked very well for resizing my partition C.  I also used explores the function to watch the 1 gig unknown partition and it wasn't empty, so I left it alone.  Thanks for your help!

  • expand the volume of original Windows disc C y

    I have original lWin & and my drive C is full. I need to expand the volume of the E drive.

    I tried the disk management, but I can only reduce. He can not open the link of the extension of the volume. What I would do.

    Do I need to do a format and a recovery CD and reinstall or something else that is not harmful if you please.

    Thank you very much

    Hello

    What version of Windows are you using? XP, Vista or Windows 7?

    Repartition: (make sure you have redundant backups because accidents happen)

    How to resize a Partition on Windows Vista & Windows 7, using disk management.
    http://www.WinVistaClub.com/T11.html

    How to shrink a Partition or Volume in Windows 7
    http://www.SevenForums.com/tutorials/2672-partition-volume-shrink.html

    How to extend a Partition or Volume in Windows 7
    http://www.SevenForums.com/tutorials/2670-partition-volume-extend.html

    How to use the Fdisk tool and the format tool to partition or repartition a hard disk
    http://support.Microsoft.com/kb/255867

    ----------------------------------------------------

    Create and format a hard disk partition
    http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

    I can I repartition my hard disk?
    http://Windows.Microsoft.com/en-us/Windows7/can-I-REPARTITION-my-hard-disk

    Formatting disks and drives: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

    How to create a Partition in Windows 7
    http://windows7news.com/2009/09/23/how-to-create-a-partition-in-Windows-7/

    Windows 7 - create a Partition (HD) - video
    http://www.YouTube.com/watch?v=l2XmBGmYfGQ

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Is it possible to configure the computer to always expand the window open?

    I have Windows XP, and I wish that IE to always expand the window of IE when a window is opened.  If it is a new feature in IE9. It is not available for me because I don't have Vista or Windows7.  Any ideas?

    Three options.
     
    1: take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and this last one. Windows will remember the size used in the last window closed , the next time that you open the program.
     
    2: any shortcut you use to launch the window, right-click, and select Properties. Under the 'Run' drop-down list, choose "expanded".
     
  • Dear all, can __How I increase and expand the volume of my hard 22nd of the available capacity at the (:)) d hard drive)

    Dear all,

    How can I increase and expand the volume of my hard capacity available to the (d) 22nd

    Hard drive

    You can't take a little D: and nail it on C:

    You delete D: > and then extend C: into the now unallocated space that will become D:.

    Save all data on D:, as it will be lost.

    http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

    How to remove and extend a Partition with Vista disk management

    See you soon.

    Mick Murphy - Microsoft partner

  • How can I expand the sidebar of Windows so that for example the photos are a bit larger?

    How can I expand the sidebar of Windows so that for example the photos are a bit larger?

    You can use your mouse to drag the sidebar of windows...

    Windows Sidebar: Frequently asked questions

  • Is it possible to expand the range of a WRT54GX V.2 with a Netgear N300 WNR 2000 V3 wireless?

    I am using Netgear WNR 2000 V3 repeat function for wireless to expand the palette of a Linksys WRT54GX V.2. I have the channels and the same SSID. I got the Netgear works very well as an extender with my Apple Airport Extreme (equipped with WDS) Terminal. As far as I know, the Linksys is not equipped with WDS. Thanks for any help.

    You go into the settings advanced on the linksys wireless to see if she lazy WDS.

  • How can I expand the frame of reading on my computor

    original title: how DO I EXPAND THE READING FRAME ON MY COMPUTOR

    I can't read my email - reading image is too small

    Hello

    • E-mail are what customer you referring?
    • This only happens on the Email?
    If you use a Webmail, you can check this link:
     
    Reply back with more information.
    See also:

Maybe you are looking for