Export in bootstrap mode

Similar Questions

• Install PT8.53 with Linux problem: unable connect in Bootstrap Mode of Data Mover

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5.

  I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  I've been setting up PeopleTools 8,53 Instance database. Because the Wizard installation problem, I created PeopleTools 8,53 Database Instance PT853 manually. I have run the following scripts:

  (1) utlspace.sql

  (2) dbowner.sql

  (3) psadmin.sql

  (4) psroles.sql

  (5) connect.sql

  Then, we perform Data Mover script in a Windows XP Client computer to fill the PeopleTools PT853 database machine Linux Sever instance. I installed Oracle Database 11 g 2 client for 32-bit Windows XP 64 - bit Windows virtual machine and run it successfully.

  In Oracle Linux 5 Server Machine Net Manager:

  Service name: PT853

  Connection type: default database

  "TCP/IP Protocol".

  Host: 192.168.196.102

  Port: 1521

  Listener: LISTENER

  Protocol: TCP/IP

  Host: 192.168.196.102

  Port: 1521

  I test the Service PT853 with "SYSADM" username and password "SYSADM". The connection is successful.

  In the Windows XP Client computer, the information in the Net Manager is the same as below:

  NET Service Name: PT853

  Protocol: TCP/IP

  The host of the database Machine name: 192.168.196.102

  Port: 1521

  Name of the Basic Service: PT853

  Connection type: default database

  I test the connection using 'SYSADM' and it is successful as well. This means that Windows XP database Client can connect with the server database Oracle Linux 5 successfully. But in the computer Windows XP Client, Data Mover cannot connect in Bootstrap Mode using "SYSADM". Its details are below:

  Configuration manager:

  Type of database: Oracle

  The database name: PT853

  User ID: SYSADM

  Connect ID: people

  Connect password: people

  Data Mover:

  Type of database: Oracle

  User ID: SYSADM

  Password: SYSADM

  When connect in Bootstrap Mode of Data Mover, I got the same error:

  ORA - 12154:TNS: can not resolve the connect identifier specified. Invalid user ID and password for the access code.

  Based on my understanding, in the Oracle database, the Data Mover Bootstrap mode connection requires a PSDBOWNER table with a 'Database name PT853 and UserID SYSADM' entry.

  The problem is that the PSDBOWNER table doesn't have a line after that I run 5 scripts above. I am looking at runs 5 scripts one by one as below:

  (1) running the utlspace.sql script creates spaces of table 2 (PSTEMP, PSDEFAULT). This script can not create 2 storage spaces. So, I created 2 tablespaces manually.

  (2) running the psdbowner.sql script creates the PSDBOWNER table. This script creates the PSDBOWNER table successfully, but the last line by pressing "connect system/manager", had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (3) running the psroles.sql script created the roles PSUSER and PSADMIN. This script runs successfully without error.

  (4) running the psadmin.sql script creates ownerID SYSADM and ownerID password SYSADM. When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  (5) running the connect.sql script creates connectID 'people' and connect password "people." This script runs successfully without error.

  My questions are:

  First of all, in the database Oracle Linux 5 server machine, when I created the instance of database PT853 using DBCA, on the management of the password for the user 'system', I unlocked it and change his password for 'system '. It causes the scripts 'psdbowner.sql' and 'psadmin.sql' got the error "username and password"? If so, how to fix?

  Second, after you run 5 scripts above, why there is no line in the table for Data Mover Bootstrap PSDBOWNER to open a session? How to solve this problem?

  Thirdly, can I just insert a line 'PT853 SYSADM' into the table PSDBOWNER for Data Mover Bootstrap to open a session?

  Thanks in advance.

  By default, the password of the population is peop1e.

  Once more, you shouldn't do anything 'manually' on the database, scripts do everything for you. Unless something is wrong.

  > When this script runs the last line 'connect system/manager', had this error: user not valid Word name and pass. logon denied. I ignore this error and continue the following script.

  I really wonder why ignore the error. This meant everything that your system password is not responsible, but something else that you set when creating the database. Never happens to you to check the script before you run it and change it if necessary?

  Nicolas.

• Columns "bootstrap" mode DW CC 2015 package Design

  The design of the layout in 2015 CC DW no standard bootstrap columns render correctly - he always breaks them on a second line, regardless of the width of the application window to DW.

  This makes unnecessary design layout to the design of Bootstrap.

  Can I do to solve this problem?

  

  Use live view.  Because the bootstrap uses CSS and javascript for rendering, you must preview the pages in Live view to see the real results of bootstrap.  Unfortunately, there is no way around that.

• Export in background mode

  Does anyone know how to run a background for windows export?
  
  Normally, under unix, I would simply like to nohup command expdp.
  
  Also, what is the purpose to be able to relate to a task Data Pump - which, in itself, suggests export is already running as a background process - until this means for the window command prompt where you launch expdp from? Can get out you of this command prompt and export will continue in the background?
  
  Also is there anyway to control how your export went? At the moment all I'm looking in the content of dba_datapump_jobs is telling me just as if the job is running or not
  
  Thank you
  Jim

  Jim,

  Export runs in a background process. There are actually at least 3 processes running.

  1. you have the client, which is where you run your expdp/impdp command.
  2. you have processes MCP which is a process of Data Pump
  3 you have a WORKER process (or more if you use parallel) which are Data Pump processes.

  I still use LINUX, but I think it works even for Windows. Once the running job, you can type a CTRL-C and you will reach an IMPDP > EXPDP or > prompt. This allows you to do other commands. We must leave the client process. You can also stop the task or killed at work. Try and type HELP at one of these guests.

  On the same line, you can type STATUS will give you an idea on what is being developed.

  Some of the reasons why you do not want to attach to a job is

  1. you previously quit and want to link to change something.
  2. you left running while you were at the office and you are now home and want to see the status. (you can have multiple clients attached to the same data pump task.
  3. your work is stopped for some reason any (power failure, breakdown, etc.) and you want to restart.

  I hope this helps.

  Dean

• New modes of export - exporting not through target buttons-layer blend modes

  This can be corrected. I do not know?

  Basically when I feature layer 'button target' application of a blending mode to the layer it does not export the blending mode correctly. that is flat/normal.

  I can get around this by applying the 'normal' mode of return to the mixing layer and apply the blend mode to individual objects, but is not ideal for my workflow. I can also get around this by using the 'save for web' option to legacy but again, not ideal for the workflow.

  Any suggestions? Thank you!

  This is a front screen:

  

  and after export:

  

  Create a new layer and drag the layer with the blending in it mode. Try again. I could just that it works.

• Version 14, I can't export to 1080 p

  I'm trying to understand why I can't take my 1920 x 1080 29 Mp4 files and export to a folder to a DVD 1080 p movie.  I can do it with version 12, but it only offers the ability to export as a mode of DVD 720 x 480. So I chose AVCHD on DVD and it filled the ISO in the folder, but the disc will not play... it says it's Blu Ray, but I chose not Blu Ray, I chose to export the DVD to the folder. It seems that I often find things I can do is no longer in Version 14. I am certainly glad that I held to the old version. Is it possible to burn my videos in 1080 p to DVD movie?

  Thank you

  You may be confused making a DVD AVCHD with creation of a DVD. An AVCHD Disc is actually a BluRay disk file, except that it is recorded on a DVD. You can not play on a DVD player. This isn't a DVD. But, if your film high definition is long within half an hour, you can save this file in HD on a DVD and play on SOME Blu - Ray players.

  You do not have the ability to create a DVD high resolution that can play on a DVD player in version 12.

• Export PNG in CMYK or RGB. Changing colors.

  Short version: using Illustrator CC. I exported correctly a logo PNG in RGB (sent to the client), but the new PNG logo looks very different from the old PNG logo which has been exported properly in mode CMYK (sent to the client, a long time ago).

  Customer wants to know why PNG NEW logo looks so much different than the EPS logo and the OLD PNG logo (all from the same Pantone color).

  Long version:

  I recently sent logos to my client in different formats.

  I, eps, CMYK, pdf and png eps

  Before you create the PNG in Illustrator CC version,

  I changed the color of the Illustrator in RGB mode, then converted my colors Pantone to RGB (specific values by the Pantone book), then exported in PNG.

  This has created a very different blue than the eps CMYK version.

  Someone else on the side customer is working with my files and question why the blues look so different. The eps of Pantone vs the RGB version.

  Problem:

  In the past, the png was created correctly - they had been exported in CMYK mode without converting anything either in RGB and they are much closer to the EPS version.

  Now, they wonder why there is such a big difference.

  I've done the process correctly, I don't know how to answer this question. Why they look so different?

  J,

  On this basis since your post #7.

  They gave their web and me specific RGB values of the company for their logo.

  It seems that you will have to do exactly this. And you must use the RGB Mode for this appearance (to answer the question).

• Export / import tablespace with all objects (data, users, roles)

  Hi, I have a problem or a question to the export of the section / import tablespace.
  
  On the one hand, I have a database 10g (A) and on the other hand, an 11g database (B).
  
  At there is a tablespace called PRO.
  
  Also 3 users:
  
  PRO_Main - contains the datas - space PRO
  
  PRO_Users1 with a PRO_UROLE - professional role
  
  PRO_Users2 with a PRO_UROLE - professional role
  
  Now, I want to transfer the tablespace set PRO (included users PRO_MAIN, PRO_USER1, PRO_User2 and PRO_UROLE role) from A to B.
  
  On B, I created the user PRO_Main and the tablespace PRO.
  
  On A, I run suite statement:
  
  expdp TABLESPACES PRO_Main/XXX DIRECTORY PRO = DUMPFILE TSpro.dmp LOGFILE = backup_datapump = = TSpro.log
  
  B:
  
  Impdp TABLESPACES PRO_Main/XXX DIRECTORY PRO = DUMPFILE TSpro.dmp LOGFILE = backup_datapump = = TSpro.log
  
  Result:
  
  The user PRO_Main has been imported with all data.
  
  But miss me PRO_USER1, PRO_User2 and PRO_UROLE role...
  
  
  I guess, I've used wrong settings in my experienced and / or impdp.
  
  Would be nice, if someone can give me a hint.
  
  Thanks in advance.
  
  Best regards
  Frank

  When you perform an export of TABLESPACE mode by simply specifying tablespaces, then everything gets exported are tables and dependent objects. Users, roles, and tablespace definitions themselves don't get exported.

  When you perform a SCHEMA mode export by specifying the schemas, you will get the schema definitions (if the schema running export is privied) and all of the objects that has the schema. The schema is not owner of roles or tablespace definitions.

  In your case, you want to move

  1 patterns - that you have already created 1 on your target database
  2. the roles
  3 all in the storage spaces belonged to several patterns.

  There is not 1 import/export command that will do that. This is how I could do this:

  1. move the schema definitions
  a. you can either create them manually or
  B1. expdp schemas = include = user
  impdp B2 b1 results.

  2 transfer the roles
  complete expdp = include = role...
  don't forget, this will include all the roles. If you want to limit what is exported, use:
  include = role: "in (" ROLE1","ROLE2", etc.).
  impdo roles come to export

  3. move the user information
  a. If you want to move all the objects in the diagram as functions, packages, etc., then you need to use a schema view
  Export
  patterns of username/password expdp = a, b, c...
  b. If you want to move only the objects in these storage spaces, and then use the export of tablespace
  expdp username/password = tbs1 storage spaces, tbs2,...

  c. import the dumpfile generated in step 3
  Impdp username/password...

  I hope this helps.

  Dean

• EXP - Mode FULL

  Hi all
  
  I could not use utility EXP export to FULL mode to check and clarify my doubt.
  
  Please confirm, Mode FULL export data and other objects of all schemas of the exporter database.

  Hello

  Full export, export all schemas.

  The CREATE SESSION privilege and the role of permission must be enabled for the user who made the export. This role is granted to the DBA.

  Kind regards
  Mansoor

• HRCS 9.0 database installation script does not have the Data Mover Bootstrap

  People,
  
  Hello. I'm working on Campus Solution 9.0 and human resources.
  
  Atfter install HRCS 9.0 in PeopleTools 8.49, I create a script and run the script to load data into a database using the Data Mover Bootstrap HRCS.
  
  Data Mover Bootstrap mode, when the script imports about 1,000 records in the database, the Data Mover becomes unresponsive. How do the Data Mover to continue to run the script?

  As I said previously, you should check the log generated by the MDS file and as explained Jean-Marc, despite his suspended looks, the script can continue behind.
  A database of loading may take some time, depending on the configuration of the server/network.
  If you have an error in the unique key, this means that the tables has already loaded, so you can drop it and restart the DMS of this table or restart from scratch.

  Nicolas.

• Export for iPad out teaching Flash CS5.5 version?

  Hey there real simple question we want to check before the upgrade to Flash CS4 to Flash CS5.5

  You can export files to the iPad to an educational version of Flash CS5.5?

  I work for a University and need to make Flash products for students on the web and for the iPad and had to be 100% sure that he would do this for us.

  Thanks in advance.

  Yes, it is always totally complete. You can always do the same thing as in the complete package of the price. The extent of the im aware you can export in trial mode.

• Move a single table with data engine

  Hello
  
  I'm new on data mover. I want to move a table and I used the following script
  
  the value of log c:\app\psft\export.log.
  output c:\app\psft\export.dat;
  export PS_COMMISSION;
  
  I get the error
  
  unsuccessful end 'command is not valid in bootstrap mode "?
  
  help please?

  Use non-bootstrap mode instead (e.g. PS or VP1 or whatever else as SYSADM).

  Nicolas.

• Resolution of the dv6t - GT230M quad

  I have quad dv6t - GT230M. In the specification of Nvidia GT230M, wrote that:

  Thank you. I already have a get 1080 p resolution based on your idea.

  Because of the computer screen laptop is 1360 x 768, so if I want to get 1080 p, I export in projector mode (in the laptop have 4 display modes: only laptop, laptop + projector, expand, projector only). When I choose the projector mode, I go to Alba Nividia Control Panel to change the resolution 1080 p.

  Thank you once again.

• Copy a table with its index of Oracle 12 to another instance oracle 12

  Hello

  I m using 64 bit Win8

  I have a huge table T1 (about 200 million) on user storage space and its index is on different tablespaces on DB1

  I built an other empty DB2 with the same names of storage spaces. I d like copy the table T1 of DB1 with all its indexes in DB2 so that the table will in User tablespace and the index go to their corresponding storage spaces.

  Is it possible to do?

  Currently I T1 to export into a CSV file and re - import to DB2 and build all indexes manually.

  Concerning

  Hussien Sharaf

  1. What is the exact syntax to export and import a table with its index?

  You will need to use the "Table". An export of table mode is specified by the parameter TABLES. Mode table, only a specified set of tables, partitions, and their dependent objects are unloaded. See: https://docs.oracle.com/cloud/latest/db121/SUTIL/dp_export.htm#i1007514

  2 How can I import the indexes in one tablespace other than the table itself?

  You can only export the table first without the index by specifying the EXCLUSION clause in order to exclude from the index (see: https://docs.oracle.com/cloud/latest/db121/SUTIL/dp_export.htm#i1007829) and then manually create the index and specify the different tablespace when you create.

• Expdp tables a schema and all the objects in another schema

  Hello

  Is there a way we can export tables to a diagram and everything else a diagram? I tried below, but none of them did the job.

  Table = A.Table1, A.table2

  schemas = b, c

  include = table: "in (a. 'Table1'., 'Table2')" "

  schemas = b, c

  Thank you

  The datapump has several modes:

  "Full import mode.

  "Schema Mode".

  "Table mode".

  'Space Mode '.

  "Transportable Tablespace mode."

  It seems that datapump cannot be in one mode at a time.

  So you have to choose the mode of table first, then for the following export select pattern mode.