Export of CA via Media Encoder - cannot get to work. PLS HELP!
I have problems to export my scene character animate as a .mp4 (or any video format) via Adobe Media Encoder? Whenever I do - using the value default and pre-loaded settings - video's fraked up (screenshot attached example).
Everyone knows this!
I use AE CC Version 13.8.1.38 and a MacBook Air El Capitan running.
Eager for advice! Thanks in advance.
As Jerry, it's fallout of a bug of SOUL involving non-standard width. We have a bug on this issue internally as well. I'll add another + 1 on this bug. For what it's worth, while I'm not an expert of low-level video format, I found that all the cases that I have seen this problem could be solved by changing the width to something divisible by 16 (even if it is hidden by another question in the extract 4 where SOUL it must be revived for a resolution change is taken into account).
In any case, I thought I would mention that because it can allow you to make a less disruptive change to the resolution of your export and always work around the bug.
Thanks - Dan Tull
Tags: Character Animator
Similar Questions
-
First CC 7.2.2 crashes when you try to export via Media Encoder
Hello
My computer is:
2 x Intel Xeon processor E5-2650 (2000 MHz, 20 MB);
16 x Kingston DIMM 8 GB PC3-8500 ECC REG. ;
PNY Quadro 4000 with 2048 MB GDDR5 - RAM;
PNY Tesla C 2075
2 x 2000 GB Western Digital RE4 (7200 UPM/S-ATA II) as a RAID I
1 x 120 GB OCZ Vertex 3 SSD
1 x 240 GB OCZ Vertex 3 SSD (system disk)
Card mother Tyan S7050GM4NR
Windows 7
I recently installed Windows 7 and the CC-Apps PremierePro, After Effects, Media Encoder, Photoshop, and Speedgrade.
When I try to export any video from first to the first Media Encoder crashes without an error message. The problem is not the project: I created several new projects and even if I don't have that one Photoshop file in the scenario that I try to export: first goes down. When I export directly from first it works, but there is no chance to go via media encode. The strange thing is that I can export AfterEffects the encoder to media without any problems...
Does anyone have an idea?
Here is the debug database file that was created:
SOUL. False false EnablePresetDB
SOUL. False false EncoderHost.NoXMP
SOUL. True true UseExportProgressCallback
False false AME.amewrapper.donothide
False false AddDebugClipInfoToTimelineTooltips
False false AddTimestampToLogFileNames
False false AddUTCTimestampToTraces
False false AllowDynamicLinkToOwnProjectType
False false AllowMergedClipsToBeOpenedAsSequences
False false AllowSetPositionDuringPlayback
False false AnalysisDataIsAlwaysCompressed
False false AnalysisDataIsNeverCompressed
ApplicationLanguage en_US en_US
True true BE.CompressProjects
AEM false false DisableCS7RelinkUpdate
AEM EnableNewSerializer true true
False false Bravo.defaultLanguage
CTPreDefinedEncodingType 13 13
CloseAlwaysTimeoutInSeconds 300 300
CloseIfContentionTimeoutInSeconds 15 15
False false CodeProfiler_AutoStart
False false CompareMediaNodeRenderers
False false CreateLogFilesThatDoNotExist
DLG. True true DebugRelinkAsync
GSM Disable10BitSupport false false
GSM DisablePixelFormatShaders false false
GSM ForceCPUOnly false false
False false DVA_syncWindowEnablement
False false DisableGPUMediaNode
False false DisableHighQualityAVCHDPlayback
False false DisableNewMediaNodeRenderer
True true DisableSequenceSettingMasterChannelType
False false DisableSpeculativePrefetching
DistanceFromLastStateToNeedANewMPEGInfo 20 20
False false DumpProject
False false DvaMarshalRPCLogging
False false EnableDogEars
True true EnableGPUDebayer
False false EnableRedGPUDebayer
False false ExporterQT.DNxHDNativeSupportEnabled
FE. True true AudioPluginScanOnFirstLaunch
FE. Fake fake PerformanceLogging
GF. False false DisableAcceleratedDisplay
GF. False false DisableAcceleratedRenderer
GF. True true EnableMultipleGPUs
GF. False false EnableNVIDIAOpenCL
GF. False false ProfileKernels
GF. False false SupportCPUDevices
HandlerProject.HoverScrubDelay 250 250
False false IgnoreDirtyState
True true ImporterMXFEnable
True true LinkLocate.Auto
True true LogTimeInTicks
MC.AudioRenderer.ComplexityBeforeRender 200 200
MC.BE. True true AddDocIDOnImport
ML. fake fake EnableDiskCache
ML. fake fake LoadTestingPluginsAtStartup
ML. fake fake SimulateGrowingFiles
False false MPEGDisableMainConceptIndexing
False false MPEGDisableMultipleOpens
MZ. False false DisableMetadataDatabase
MaxLogSize 0 0
MinimumDelayBetweenFlushesInSeconds 1 1
2 2 Monitor.PlaybackQuality
2 2 Monitor.ScrubbingQuality
4 4 Monitor.StoppedQuality
NumberOfInstancesBeforeContention 5 5
False false Player.EnablePerfomanceStatics
False false EnableQEDOM REM
QT. False false DisableQuickTime32
QT. True true EnableNativeExports
30000 30000 QT32ServerManager.StartupTimeout
False false REDRocketCompletelyDisabled
REDRocketMaximumNumberOfCardsToUse 0 0
False false ShowExperimentalEffectParameters
False false SuppressPeakFileGeneration
False false TimeWarpFilterEnabled
False false TraceAsync
TraceSyslog
True true WindowMediaPARApproximation
False false Assert.Enabled
Hi Mark,
Thanks for your reply. Without having changed anything, he works all of a sudden... I got the block all day and now it works.
Thanks for your response, best regards
Wolfram Wagner
-
Help! Problem exporting in Adobe Premiere &; Media Encoder
Hi guys,.
I have a problem for which I do not find any solution on the web. I'm not a very experienced user of Premiere Pro. Maybe you can help me!
I did a project using Adobe Premiere Pro.
There is only a single sequence, but I have several clips that I want to export in this order as separate videos (see video 1, video 2, video 3 in the picture)
The problem is that when I open Adobe Media Encoder, I opened the sequence and I export all the different clips, exported videos don't keep all the effects that I applied to the video (contrast and brightness, other adjustments of different image settings / effects etc.).
So, I can automatically export all videos with Media Encoder, but with no correction of color or other adjustments. When I play the first sequence, everything looks good. When I export videos using Media Encoder, they have not all applied effects.
If I export the sequence directly in first as a long video, it keeps the effects, but I get only a single video, and I need all export them separately.
The only way it works is different sequences manually and export all of them at once. But I've got 200 of them. So it will take a lifetime
I guess there is a smarter way to do it.
Happened to you? Is this something that I'm not just doing?
What should I do to keep all the effects that I apply when exporting Media Encoder?
Is there another method I could use to correctly export all 200 videos in this order in addition to do it manually?
Thank you!
Are - what you happened to select items in the project Panel in Premiere Pro and SOUL queue? You can export a timeline properly (select a timeline > menuFichier > export > media > Click 'Tail')? The effects are only applied on the mounting elements, not media clip in the project Panel.
-
Export the movie in Media Encoder provides support screen offline
I've recently updated to the latest versions of first Pro CC (2015.3) and Media Encoder (2015.3) and since the update, I had issues of export of sequences in Media Encoder. The issue I'm having is that everytime I try to export a sequence from the SOUL, it gives the screen offline, on the same clips in the preview window, even though they appear correctly inside the preview in PR. window the really strange thing is that when I export directly from the menu "Export Media' in first itself with the same export settings, everything is fine.
These project files are templates for the videos that I do on a weekly basis, and they worked perfectly fine before the update.
I tried the following steps, but had no joy with this problem:
- Creates a new sequence with only the relevant clips.
- Created a new project with only the relevant clips.
- Moved to the location of clips on my drive hard and at PR
- All the project files and clips on my laptop and used the pre version updates of PR and SOUL, these exports very much copied.
My tests, it seems that there is a problem with SOUL not recognizing some .mp4 files because it is the only common thing between the affected elements, but happens not all the files in .mp4 h.264.
I found the solution by another Member of staff.
For those who have the same problem, what I had to do was make sure you I have deselected the "import footage natively" in the preferences of the SOUL.
-
Cannot get a connection of help after 120 seconds.
Hello
Cannot get a connection of help after 120 seconds.
I get this result when I run OpenScript scripts of Test Manager.
I installed browser support.
Can anyone advise, a solution.
Thank you
LEAHi Leah,
Maybe I wasn't clear, you must create a specific Windows user account for the service. Or if your all running on a box, use the account that you are currently using to log on to the service.
Then go to services, to find the Oracle Oracle Application Testing Suite Agent Service, double-click on and switch to the logon tab. It specify that you want your agent service to run under a different account under the local system account.
Good luck, Jules
-
I use the free trial version. I try to print an Applitrack online application. He said that I should print preview it. It does not work. How can I get it works. Help. I'm afraid that my request will be not visible to employers.
If it is an Acrobat, who never had a print preview, because the PDF screen is an overview of what the prints.
-
Blue mount when you export images via Media Encoder CC 2015 Lumetri
Hi all
I have a really weird issue involving images with a Lumetri applied LUT and export through Media Encoder. Rendered images will come out with a massive distribution of blue color. I use CISC-c of a MkII C100 and application of color Lumetri with a LUT and then a few basic correction (no creative effects). There is no other effect applied to the images, and the exported result is not equivalent to the images without the applied LUT (so this isn't like ME is just without taking into account the effect). Export directly from the first results in video correct research, as does the export through ME without the applied LUT.
Images of example (as it appears in the first and when you export directly, first and then when exported from Media Encoder with the color cast):
I'm under Premiere Pro CC 2015 (up to date as that is to ME) on Windows 7 64 bit Pro, Intel Core i7-4910MQ, 32 GB of Ram, Quadro K4100M (362,13 drivers). I can't say with certainty when this problem first arose, partly because I am not using lut for a long time, but it was certainly past at least a month or two. I tried searching online on this subject, but the only similar thing I came up with that was of CS5.5 and given workaround solution was to place an effect of cropping on the video, which I have tried without success.
Someone else has experienced this or has any ideas please? I can export directly from first as a solution, but it's not ideal at all because I can't move on to other work while it exports.
Thank you very much
Tim
Hi cast,
What is the setting of reading Mercury on Premiere Pro and SOUL engine?
In addition, in the preferences of the SOUL, could you please uncheck the option "Import sequences in native mode" and check if it works?
Thank you
Regalo
-
Can do anything on the Red frames on export of Prem Pro or via Media Encoder encoding?
Red images to be displayed when you export directly from Prem Pro or through Media Encoder. Always on the C300 mxf files and totally, completely at random.
I produce documentary and concert film. I need the confidence that each export I do on these long form projects are 100% solid in terms of quality. Have been times recently when I QC had a film only for a red frame Flash upward in the last 5 minutes. Then requires a different export and another session QC.
I am aware that it is a known problem. Everything was done on this subject he or y at - he of the workarounds that anyone can share?
Thank you
Mac Pro
3.5Ghz 6-core Intel Xeon E5
16 GB 1866 MHz DDR3 ECC
AMD over-pants D500 3072 MB
AJA ioXT video card
What first version are you on? It was a problem in 2014.0 but was supposed to be resolved in 2015.0.1. I don't have the problem with my C300 files in the latest version.
-
'Error compilation film unknown error' made or export in first or Media Encoder or
Hi all
I'll have made troubled and the export of which certainly is a sequence quite complex 2.5 hours of first CC 2015 and Media Encoder. I'll describe the problem, then provide my card, then describe my attempts so far solutions:
- The problem: try to make my outside sequence gives the error "error compiling Movie. Unkown Error"at irregular intervals, sometimes after 10 seconds and sometimes after 10 minutes of rendering. It occurs also when rendering of three subsequences that he content and when expporting media first or Media Encoder.
- My specs:
Material - I am on Windows 10 x 64-bit on a desktop computer custom built with MSI AM3 + configuration motherboard with an AMD FX6350 3.9 GHz processor, 16 GB of RAM and a 2 GB AMD Radeon R9 380 graphics card, all current drivers.
Software - creation and Media Encoder are defined to use the reading Mercury (GPU acceleration) engine and the composite linear color, and are both set to update to version updated for release 2015 CC.
Sequence - I'm editing in square pixels of 1080 p AVCHD, 29.97 frames/second, 48000 Hz sampling frequency, using the only i-Frame MPEG video previews. My sequence has three subsequences, all of them contain a multicam pulling three video sources synchronized sequence (it is a composite event that was recorded live). I export in H.264 MP4 @ 10-12 Mbps with 'Match sequence settings' for the framerate, bitrate and size of the image. - My attempted Solutions: , I started with the basics... Clear your cache of media, delete make files and files video preview, flatten your blocking sequences, export each subsequence individually, create a new project and import the old sequences, all this, trying to render and export between each of these steps. Frankly, I'm bad-shot in the gut. I desperately need to export this sequence successfully and there deliver my video to an audience online and from there, also create versions for DVD and Blu - Ray.
I'm just wishing so bad for an error code, a clip defective to be identified somewhere, an Executive responsible for headaches, something. Something besides, 'film compilation error. Unknown error. »
Grateful for any help offered by the community of users of wonderful to Adobe Premiere Pro.
Hi Nathan,
Sorry for your troubles. Looks like you have a sequence that should be able to be exported, but can't. To add to your frustration, the warning dialog box has no clue as to what is the error. With what is happening at random intervals, it is really difficult to solve.
For the latter, the next release of Premiere Pro's warnings more explicit. This update is coming soon. In the meantime, let's work on the export of this sequence.
Firstly, log a case with support. Here are the details on how to contact them.
The first thing to look at is your system, I would say. It looks up to the requirements of the standard, however, it is quite a long sequence. If you have lots of GPU based effects and/or Lumetri effects, your VRAM might be out of memory, cancelling export and crashing with error compilation Movie.
If it was me, my prime suspect. How do you work around that? Avoiding the GPU? In fact, Yes. It will take time for export, most certainly. This could take days. Not much you can do, unfortunately, unless you muscle your hardware. Currently, my guess is that your GPU is probably not powerful enough for what you want to do. In the project settings > general switch to software only.
Can you avoid this in the future? Yes, with a different workflow what smart favours rendered instead of make or export at the same time with GPU based effects.
This means that you'd have to transcode the AVCHD video to a codec chip to make and restore the effects along the way in this same codec. At the time wherever you export, you are not typing the GPU because you use files preview instead.
Info: FAQ: how to speed up making, export or encoding?
Thank you
Kevin -
First exports no more, nor media encode
Hello, I have problems with the first... Once again!!!
Now it will be not just to export my movie with first or Media Encoder.
It starts and then stops..., just like that.
With Media Encoder, I got a warning saying no sense on files that are NOT good (not the chronology I try to export but to old projects that are no longer on the disc).
And with the first it just bugs.
Someone knows why?
I have a Mac of the retina.
And I must say that I have a lot of bugs with first, much!
Really, why not do something?
And yes I know, I'm probably the only one, at least that's what they say on the phone...
Thank you.
Mathias
Same problem here. I think that it maybe a problem of sequence where the created sequences in the previous version can not export in the update. I created a new sequence, then copy and paste the material from the previous sequence in the new. That seem to allow me to export. Just to make sure that the settings that you are sourcing corresponds to the new sequence you create. I did all the other tests, but which seemed to have my media on this once at least.
-
After Effects exports make queue in Media Encoder
Steps I do:
1. I'm opening after effects CC 2015
2 Cmd + N - creates the new composition
3. Cmd + Y - creates a new solid layer in the composition
4 Cmd + Alt + M - send rendered in Adobe Media encoder.
Right?
WHY it does not work?
PS
I have restart: AFX. SOUL; computer. I have the day.
Hello
Try the following steps.
Go to MAC HD or boot drive/library/Application Support/Adobe/common/Plugins/7.0/MediaCore.
If it's that found nothing in MediaCore move it to desktop (for backup) and make this empty folder. Check Media Encoder once done.
If this does not help, try the following steps.
Please try to rename the files of Adobe at the following in old_Adobe location
Navigate to the Documents folder and rename
Go to User\Username\Library\Application support\Adobe
User\Username\Library\Preferences\Adobe
Library of the user is hidden so click on the menu go to option "go to folder" and type ~/Library or click the menu go and press on choose to select it.
Vinay
-
I have several CD of music that play in the drive of the car in the order I put them into the burn list/list of reading. Now, I have a CD that plays in its agenda, and I can't understand how that is wrong. The CD plays ok on my PC...
Hello
1. you try to create a MP3 or Audio CD format?
2. what happens when you tried to edit the order before you burn the CD?I suggest you to go through the link provided below.
Burn a CD or DVD in Windows Media Player
Windows Media Player playlist: frequently asked questionsProvide the link below and refer to the section change the settings for ' add a list of all files burned disk to format;
I hope this helps. -
Premiere Pro Media Encoder link mysteriously stopped working
I have CS6 Master Collection on a Windows 7 x 64 Ultimate HP Z820, 32 GB of RAM, Quadro 4000 and have been using it for over a year. I use Premiere Pro and batch queue to Media Encoder for encoding. The last time I used this workflow for the batch was about 130 days ago, and it worked like a charm (as it should). A few weeks ago, I was on another project and tried lots once again, just like before, even using some of the same presets (on a timeline "nothin' fancy") and Pr would create a project file in the TEMP folder after I pressed the button of the queue, and the project appear in the queue of the SOUL SOUL would launch. I press start and wait a long time until that finally, in the encode Panel, I would see 'connection to Dynamic Link Server... ". "after several minutes, I'd get the goat and find an error"could not read the source file... ". "in the newspapers. After verifying that the source was there, I decided that it was really a matter of dynamic links.
Here's some more data points of things I've tried (also point to a problem of dynamic links).
(1) exporting works (encoding) directly from Pr very well (so the SOUL without head works)
(2) import a sequence Pr in the SOUL does not work either, I get an error from import Premiere Pro sequence dialog (after a long wait "connection to the server of hotlinks... ") that"the connection to the Server Dynamic Link failed".
I do not suspect it is a dynamic link question, but do not know why, or what has changed. I tried the solution 'create a new shortcut first in dynamiclink folder' found on the forums and Google but it didn't work. When I tried it first, I found two shortcuts already, a PR and Ae, but TWO of them made reference to a case of CS4! I've never owned CS4 and went of CS3 Master Collection CS6 Professional Design. I also suspect that this issue was caused by one of the Pr updates that have taken place in the last days 130 (since the last time, that I know this feature worked). I made no changes to my system during this period.
Kyle suggested it could be the firewall issue is blocking TCP traffic using dynamic links, but I do not use the Windows Firewall, and all that's happening on one machine, then there should be no TCP traffic on the network (unless he contacted Adobe?). I use Webroot Endpoint Protection, but have received no indication that something is suspicious or that he was blocked. Adobe engineers any help would be greatly appreciated.
I'd be willing to help with troubleshooting on my system, that I did with hearing in the past, but don't want to uninstall the suite and who again. This should be tracked down watching updates pushed CS6 inside the last 130 days. I think that there was two.
Thank you
Shane
I solved my problem thanks to the post of @gagneh on this forum. It turned out to be the NVidia nView Desktop Manager applet in the control panel. It has been activated, and I believe that it has been activated for a long time. I don't know if something in a recent update of broke things, but as soon as I disabled the Desktop Manager, my dynamic link started working again in all aspects. Give it a try. Good luck.
-
Exactly what the title says.
If I try to make in Adobe Premiere or send it to the Media Encoder, the project blocks everything to halfway through the rendering process. He always seems to crash at the same point in the process. Similarly, the program crashed a few times while I was working on the project, but I've always been able to recover and pick up from where I had left. Everybody knows such a question and know how to fix?
Hi Matt,
Ann has a valid point. If it crashes at the same place every time, she can be the media on the timeline at this particular point, or may be the effects. (if requested) Give it a shot and let us know.
In addition, this could help:
Go to file > project settings > General and change the "Video Renderer" to "only Mercury playback engine software. Click 'OK' and select "Remove the Previews". Then export them again.
Thank you
Regalo
-
WHEN I RECEIVE AN EMAIL WITH AN ATTACHMENT I CAN'T OPEN IT. IT SAYS WINDOWS MEDIA PLAYER CANNOT ACCESS THE FILE.
Help, please
How this is related to Windows Update, John?
Maybe you are looking for
-
Can't find drivers for Win 7 for Satellite A300D-14R?
Hello I bought Windows seven, that toshiba has suggest my.So now, I have a problem; I couldn't use the "FN" key, I could not use the toshiba, I couldn't ' use the driver on toshiba. On the site I find and in the pack of my laptop, it does not exist.H
-
I'm having this problem, everytime i click a link on other program, like the program's link on the about tab, or a youtube link on Live Messenger, it won't open, a dialog pops up saying firefox is already running and not responding, but it is there,
-
Greeting of the ringer for android
Impossible to find
-
Reset hard drive password?
Hello world I have an old T60, I intend to give my mother to check e-mail and look at pictures. The laptop works very well (with the exception of a dead screen, I just replaced). I have a small isue, however. There is a hard drive password that appea
-
Purchasing licenses in volume for Windows XP
I understand that Microsoft, selling more than XP, but you can downgrade to XP from Windows 7 proffessional. I am in need of 10-20 licenses of Windows XP and would like to know what my options are. Individual purchase a copy of Windows 7 and it dow