Export of multi-page excerpt

Similar Questions

• I have created a multi-page document in inDesign and exported in PDF format.  The original file size is 13.27 mb.  I used the command size reduced to 2.86 to the file to download on the internet.  However, one of the images in the original pdf file does n

  I have created a multi-page document in inDesign and exported in PDF format.  The original file size is 13.27 mb.  I used the command size reduced to 2.86 to the file to download on the internet.  However, one of the images in the original pdf file does not appear in the smaller file.  Can someone help me?

  Try the PDF tool optimize.

• Export a document multi-page of InDesign to PDF single page but with unique filenames using scripts

  Hello

  I use InDesign 5.5.

  My goal is to export an InDesign MultiPage as single page PDF files, but every single PDF must be named uniquely.

  For example;

  InDesignFileName_487275123.00.pdf

  InDesignFileName_734876882.00.pdf

  .. and so on.

  I spent a lot of time searching online and the closest I found is the software called exit factory that works very well.

  Factory works by placing a title of script in a textframe on the master page in InDesign. Then everything that is typed in the text on each of the separate pages block sets the file name of each separate page.

  However if I can solve this problem without any investment cost my boss will be very happy

  I found PEU5 that works very well for export as single pages, now it's name every single PDF, but I don't know anything that would you like to create a script, but I get the gist of what they are doing. I understand that a script could solve the second half of my problem.

  Can anyone help?

  Thank you.

  S

  Maye it works for you:

  http://www.kahrel.plus.com/InDesign/pdf_individuals.html

  Peter

• HP C6280 All in One Printer: unable to save the scanned document of multi page as on the single Document using the Preview on IMAC computer

  I recently reinstalled my drivers on my IMAC computer to correct some strange characters appearing when printing from Microsoft word via Parallels.  The relocation at this time and the time has fixed this problem.  My most recent issue is not able to save a scanned document of multi page into a document using an excerpt?  In the latest that I had to do was high brightness, scanned documents to be saved and presto, all were saved under one.  Now you have to go save each of them at a time.  If you have a 5-page document, you need to go through the registration process 5 separate time create several documents, which is a big waste of time.  I have also my C6280 DPL 100 size should be a problem, I think.  To correct even any help would be greatly appreciated.

  RG.

  Hi @RGrantB3,

  Welcome to the HP Forums! I'd love to help you analyze documents several pages in a single file. When you scan, you select PDF as the format scanning? When you select the PDF file, you should see an option to select, save all pages in a single file, or a variant of this option.

  If you do not see this, please post a screenshot of you scanning settings for I can visually identify the issue.

  How to take a screenshot on a Mac.         How to post a picture on the HP Forum s.

  I can't wait to hear back on your part. If this resolves the issue, please click Accept as Solution button below so that others can see what has worked for you. Thank you.

• grey multi page tiling?

  So, I try to save a lot of work recombine individual pages by doing a project like 1 sheet in illustrator (CS3) and then printing to PDF.  But I can't click the multi-page PDF create tiles Page option in the general section as the instructions say, because it is grayed out.  There is a global setting that I need to reinstall, or am I missing something?

  I also tried just print the PDF and makes just Illustrator crashing.

  Thank you

  Eric

  There is your problem. Just a tile. The document is not configured for printing of the tile.

  Page tiling is a print setting. He tells the printer to print the document in tiles that are the size of your supposed media (the size of the sheets you have pointedly loaded in the printer).

  Just for clarity to do this:

  1 suppose you build a document that will export to PDF format with 16 vertical format pages. File > new.

  2. in the preparation of the Document, set the 11 "height and width of 8.5". But then enter "* 2" after 11 and key in "* 8" after the 8.5.» Click outside the field, and you will see the size of the artboard change to 22 "x 68". Click OK.

  3. display > Show Page tiling. You see a page of tiles.

  4 file > print > general section. Select Adobe PDF 'printer '. "The value size support custom, portrait, width 8.5", height 11 '.

  5. click on Setup to the configuration pane. Select Pages of tile in the tile popup. Click done.

  You will now see a work plan with 16 tiles numbered Page with an area of 22 "x 68". If you save a copy in PDF, you will have the ability to save tiles as separate Pages.

  JET

• I'm unable to scan a multi-page document. HP Deskjet 3052 has J611

  I'm unable to scan a multi-page document. I tried everything, re-installed the driver and studied the help settings and there is nothing. Once I scan a page it allows me only to save it and not to add another page to the document. I can't send a pdf CV by attaching two separate pages. I have scanned multiple pages documents other HP scanner and never stumbled on this dilemma. I am running Windows vista and the printer is the printer HP Deskjet 3052 a J611. Help, please.

  Hello

  Don't forget to run the scan of the computer to scan several pages.

  Open the HP software and click on scan a Document or Photo.

  Select the PDF shortcut and if ensure that the dialog box overview checked to be disaplayed.

  Make sure that the resolution set at 300 DPI or lower (any higher resolution does not support multiple pages) and click Scan.

  Use the button to add additional pages until you are finished, and then click Save.

  Shlomi

• Multi-page scan to e-mail/network folder on dish (Color LaserJet MFP Pro 476dw)

  For scanning for send/network folder flat, sweeping setting failed to single page.  There is no option to set the scan multi-page either on the MFP or embedded web server page.  Any suggestions?  There will be a patch/update software?  Thank you.

  You can scan multiple pages of a scan from the tray by choosing settings first.

  The icon Touch scan-> scan-to - network-> choose the folder-> Touch 'Settings' which is at the bottom left of this window.

  At this point, you can change the file type, resolution, scan source, etc.

  Click 'Scan Source'-> 'flat' touch-> Touch "several pages".

  Then, you just press scan after the loading of your pages on the flat.  Good luck.

• multi-page analysis records as individual pages

  HP Officejet4620 Windows 8 multi-page scan through the feeder, but are available to be saved in individual pages.  How to create a multi-page document?

  Hello

  You can start HP scanning application. From there, you can change various scan setting. Click Advanced settings (blue link) near bottom right. When the new dialog box opens, click the file tab. You can check/uncheck 'Create a separate file for each scanned page' and save the setting. This option may be dimmed according to the file type that you select (for example. (JPEG).

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  "Although I am an employee of HP, I speak for myself and not for HP.

  Say thank you by clicking on the "Bravo!" Star"who is on the left
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.
  . "

  -Desk10

• What does multi-page tiff?

  What does multi-page tiff?

  "TIFF" is an image file format.  A "multi-page TIFF" is an image file that contains multiple pages of a document.  Frequently, the incoming faxes are saved as multipage TIFF files.

  This is a pretty good description--> http://www5.hanford.gov/arpir/?content=help&help=mptDifference

• Problems with files .tiff multi-page on XP using IE7

  Under XP/SP3.

  Following an upgrade to IE7 or IE8, we can no longer view all pages in a .tiff file.  We see only the first page.  If we go back to IE6, go figure, it works fine.  For obvious reasons, we do not want this machine to stay on IE6.

  File type association is properly configured to use Microsoft Picture and Fax Viewer.  QuickTime is installed and MIME it is correctly set to do NOT use Quicktime.  The CLSID in another post has been deleted and the computer restarted.

  Your help is appreciated.

  Try using the free software IrfanView to view your multi-page .tiff files.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  IrfanView and IrfanView plugins
  http://www.download.HR/download-IrfanView.html

• send a multi page fax

  When I try to send a fax to multi page I put the pages printed side upwards in the sandbox until I hear the tone, press fax.  It then passes through the composition in no time I'm getting print fax confirmation has been sent, only complaint is the pages in the status bar have moved, should not go thru and get out just below the upper tray.lc46

  If you send just regular paper, while Windows is not serious. Your device can send stand-alone fax machine.

  If the pages didn't move at all, then somehow the pages in the ADF (automatic document feeder) were not detected, and there probably send the fax by scanning of the glass.

  Try to delete the pages and put back them again, you should see 'original charge' on the front panel when the charger detects the pages.

  Read this page if you have questions about the use of 8600 Pro to send faxes:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?prodSeriesId=4322915&ObjectID=c02921161

• Not available TWAIN and multi page unavailable

  I have a scanner fujitsu fi6150 can I connect to Remote Scan using the WIA driver but not TWAIN driver. Not necessarily a big deal, but I don't have the ability to select several pages under WIA. The only way I can get around this must apply multi pages.

  My questions are:
  (1) why not TWAIN be available when the TWAIN driver is loaded.
  Why 2) is the disabled multi page option and how can I get around this? Is there an INI setting that I can change?

  Thank you.

  Hello

  Usually if RemoteScan is unable to 'see' a TWAIN driver locally, it's because the TWAIN driver has not been installed or does not work, you can always test it locally in a compatible scanning TWAIN as a Microsoft Office application. You want to speak to problems with the scanner driver Fujitsu himself.

  RemoteScan inherit the functionality of the scanner driver that is used, you will want to check the WIA driver locally (by running a scan in Microsoft PAINT, which is only compatible WIA) to ensure that it with not problems with MultiPage scans. If you are able to do scans multi-page locally with this driver and are having problems with RemoteScan for some reason, you want to call our support team at the 406-721-0276.

  Thank you

• HP LaserJet P1102w worked very well and now just print 1st page of multi-page documents

  Hi, I used my printer for more than 6 months.

  Last month, has had the problem for a couple of days, then he went suddenly (yahoo, I thought).

  Has started again last night when printing pdf documents, it only prints the first page and then it seems stuck on page 2 (52% complete transfer appears on the windows printer).  For word, it seems to just take forever to print other pages...

  Running on a Mac OX X Yosemite.  Printer is connected with a wire (I was never able to complete the wireless connection and got too busy to spend more time understanding...).

  Tried to turn off my computer and then restarting him.  Also stop the printer and restarted.

  Thanks in advance,

  M

  Hi @MartineRB ,

  I see you are having problems printing multi-page documents. I would like to help.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the printer name) Then click the Add button.

  Try to print again.

  If you are able to print now by the USB connection and want to set up the printer on the wireless network, take a look at the following:

  Restore the default settings of the printer.

  Turn the printer off, press and hold the wireless button and the Cancel (x button) button while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Printing a Configuration Page. Select the method two.

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open if it is not.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps instead of the video.

  You must connect the USB cable from the printer to the computer to install the printer as a USB device first and then to configure the wireless network.

  Turn on the printer, connect the USB cable and install the update from Apple that should load automatically.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Status make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear) Make sure that the printer is listed beside the use: displays the name of the correct printer and not the driver by default, and then click the Add button.

  Remove the USB printer in the list of printers and Scanners window.

  Unplug the USB cable.

  Test the printer.

  If you need help, let me know.

  Good day!
  Thank you.

• Model to Multi Page PDF Adobe project?

  Looks like something easy to do, but I can't understand this.

  I can share the page of each project individually in PDF format for Acrobat save each page to DC cloud and then cloud.acrobat.com combining files in PDF multi page, but it's too long a process.

  There must be an easier way.

  Thank you

  J

  Hi FashionClassroom.

  Actually, it is not yet possible in the model. The good news is that it is something that the working team, so the function it will make an update.

  I hope this helps.

  Sue.

• How to print pages of a multi-page document

  How to print pages of a multi-page document?

  It's a tif with 259 pages file which I want to only print three.

  Printer gives me no option to select individual page when I go to print.