Export of report Script assistance

Similar Questions

• Export the data as a percentage with a report script

  Hi all

  Hope everyone are great as always.

  We have percentage data under the necessity of planning (V 11.1.2.2) hyperion to export as a percentage.

  Currently, it exports 100% 1.

  Is it possible that I can export it as 100% or 100 instead of 1

  Kind regards

  TVMK

  The problem you will have, is how the report script know that Member should be reported as a %

  You can take a look at some examples

  Example 8: Creating custom headers and the characters %

  Example 14-b: asymmetric columns

• Calculation report Script vs. script

  Hello all-
  
  I am recovering a data slice of essbase database. I have 2 options to write a script to report or a calculation script. Which of these method is bext for export of data regarding the time retreival and use of resources?
  
  What is the fundamental difference between the two?
  
  Thank you!

  Hello

  I assume you mean BSO cubes as you do not have the scripts of calculation with ASO.
  So basically, what you ask who is the fastest report Script or command DATAEXPORT via calc scripts, I don't know if there is a definitive answer to this. I think that both can make each other depending on the type of query.
  With DATAEXPORT you have the abilitiy to export directly to a relational target as a text file, if you have a lot fewer options formatting, with the report scripts, you have much flexbility in control in creating as output report and has a wide range of commands.

  DATAEXPORT is relative novelty compared to the time report Scripts have been around and its purpose is simply to export data... I'm sure that DATAEXPORT will have some improvements but it has the limitation of being tied down to BSO. With DATAEXPORT, you have the added advantage that you can calculate using the calc script data before exporting it.

  He must try both methods and see which works for you.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I want to export a report to several pages to CSV using javascript code... Please suggest

  I want to export a report to several pages to CSV using javascript code... Please suggest

  Hi SubhajitChakraborty,

  If you are using Internet explorer as web browser, then confirm your request in Internet Explorer development Forums.

  http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads

  If you use a Web browser to explore, then look for JavaScript communities to help.

• MDX report script...

  Hello

  I am writing some MDX queries via trying to convert remaining report Script.

  Orders of there is an amount in report Script that I've found equivalent in MDX, in particular command TEXT

  < INSTALL {TabDelimit} {decimal number 10} {IndentGen-4} < ACCON < SYM < CITY < END

  < PAGE ("CHANNEL", "REGION", "ENTITY", "PRODUCT")
  < COLUMN ("METRICS")
  < ROW ("TIME", "WEEK")

  Members page
  {SUPPAGEHEADING}
  Members of the column

  Line members

  
  {JUMP 4}
  {TEXT 10 'HOME'}
  {TEXT 10 'REGION'}
  < UDA ('TIME', LOCAL_REGION)
  < UDA ('WEEK', LOCAL_REGION)
  !

  Thank you

  Hello

  All formatting problems were finally solved in the VBA code.

  So, problem solved

  Thank you

  Best regards

• How do you export the report to the single campaign?

  Hey all,.

  I ran my first simple campaign and I'm a big fan of the presentation of the report Eloqua provides - includes just the basic stuff (send, openings, clicks, etc.). Is there a way to export this exact Visual report?

  Thank you

  Greg

  Currently, you are not able to export this report.

• Command in a report Script 9.3.3 LINK

  Hello

  I would be grateful if someone could help me with a single line in a report Script.  I don't know what I'm doing.  We currently have the line below, which works well for years.

  < LINK (< LEV("Account",0) AND NOT < DESCENDANTS ("Statistical_Accounts"))

  There are three accounts in the Statistical_Accounts we want to add.  Let's call them StatAcct1, StatAcct2 StatAcct3.

  How can I include them?

  At the top level, we have account.  At the second level, we have "GLG" and Statistical_Accounts.  I fooled with a number of things.  I get compilation errors telling me that everything I do is not valid.

  Please someone rewrite this one line for me.  I am begging?

  Thank you, Kevin

  I've tried sample basis and come with

  ESS_LOCALE English_UnitedStates.Latin1@Binary

  Qtr1 Qtr2

  !

  So I think that what you need is

• PowerCLI daily report script automation

  Hope everything goes well, I just started using PowerCLI to automate some admin tasks in our virtual environment, I have a .ps1 alan daily report script renouf, I'm sure you've seen or used, but I'm trying to make it automatic and no matter what I do, I always get prompt to connect to the server you know a smart way to use a file batch or something that will run the script without user intervention?  Basically, I want to create a dashboard admin with the ability to click on an executable file or batch file and have it initialize the analysis without having to provide credentials...  Any input would be greatly appreciated.

  Chris

  Chris

  Yes you can do it.

  Create a command batch script.

  Call;

  %Path%\powershell.exe - PSConsoleFIle "Path of Vim.psc1" (usually the files\VMware\Infrastructure\vSphere program PowerCLI) "&"Path to Script.ps1"vCenterServerName.Domain.Name".

  I hope this helps

  Nathan

• When I export the report to EXCEL files and filter the data, it will display incorrect data

  Hi experts,
  In OBIEE 11.1.1.6, when I export the report to EXCEL file and open this file to view all the data, it is correct.
  However, as the amount of data is so, so I add filter for each column (click on the sorting-> filter filter)
  When I select data in the filters, I'm afraid that I find the value of 'White' in the last line in the filter area, but in the table, there no null data. Why? Are you facing the same issue?
  Secondly, when I select a value, it will generate a data line.
  
  For example:
  2008 - Region1
  -The region.2
  -Elle3
  2009 - Region1
  -The region.2
  -Elle3
  
  
  When I select 2008 data in EXCEL, it will display unexpected data, as below:
  2008 - Region1

  Exactly... If you export to the format you will not face question of null data or incorrect when filtered.

  Kind regards
  DpKa

• report script

  Dear gurus,
  
  I would like to ask when I extract data in the report script
  I have lots of files
  
  as
  
  Act Fy12 account1 m1 30
  Bill FY12 Account2 m1 20
  
  
  So now account1 and Account2 must go to Account3
  
  Suppose account1, account 2 and Account3 are members of the account (zero level)
  So what I did I ignored account colum and created the header called Account3 and tried to load but I see error 100037
  
  And 2 records would be just for example... I get about 100 + and a few times the user created new Member for accounts a few times, it would be difficult to mae these reserve each month
  
  So is it possible to make the chnages dependent rule or change their script to report to as before
  
  
  M1 Bill FY12 Account3 50

  As tim says better, you go on planned measures, and this audit should keep the rest of the dimensions in the header

• Report Script Help

  Hi all
  
  Is there a formula in a report script to achieve the following objectives.
  
  I have the hierarchy below->
  
  B
  -b1
  -b2
  -b3
  
  All the children of the 'B' are stored members.
  
  Is it possible to get the 'B' = 'B'-'b1 '.
  
  Thank you

  My first thought was that you could do with RANK of CALCULATE, but when I really tried to do, it seems surprisingly tedious. For example, it works on Sample.Basic to create a new "East", which is actually "East"-"New York" (roughly the equivalent of what you're looking to do):

  There could be a much more accurate method, but at least it shows that it is possible. The thing is that the "East" referred to in the SAVEROW / SETROWOP / PRINTROW is not a member of the "East"; It's a calculated line. SUPOUTPUT hides the display of the "East" 'real' line and the line "New York", which is subtracted from the "East". All of these commands are in the technical reference information.

  Not sure I am a fan of creating output that resembles an existing Member, but returns a different value, however. Users are so easily confused... :)

• OSI report Script question

  Hi people. I have problems with Essbase report script for a BSO cube.
  
  I have a sparse dimension called entity which has some members from level 0 marked with an attribute called "operator/Non-Operator. I want to do is have records in this report script appear only for the descendants of a parent 'X', which have also been marked with the attribute value "Operator/Non-operateur" to "O".
  
  What I put in my script to report was this:
  
  < DIMBOTTOM 'X '.
  < WITHATTR ("Operator/no operators" == O)
  
  
  The result is the valid script and I get an output, but this isn't a correct output. I wonder if maybe I need to use a command LINK or something else?
  
  
  Thank you
  
  
  Tom

  Yes, the Link command should do.
  If 'x' is a dimension...
  <>

  If 'x' is not a dimension...
  <><>0) AND

  Robert

• Export of reports in the workspace

  Hello
  
  I use Hyperion 11.1.2.1 and IE 8. Every time when I tried to export a report EN in excel, the workspace loggera me off for the first time that I have to export, and then after re-login, I am able to export to get the excel file. Is there any setting of IE I can set to prevent this? Any suggestion will be highly appreciated. Thank you.
  
  Kind regards
  Jerry

  Try going to tools > Internet Options > Security > custom level > and then activate 'ask confirmation for file downloads '.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Export of reports

  I am looking for a solution customize the export of reports. I need solution for one of the following scenarios:
  
  1.I have an interactive report that gives me details about certain products.
  The report also breaks from report on the category of product in column a.
  
  How can I download the report in CSV or Excel while preserving the format that is showing on the app.
  I mean I want that my file exported to show something like:
  

   
  Category: Furniture
  product name           id       quantity
  couch                  10        100
  
  Category: Utensil
  product name           id       quantity
  pots                    20        45

  But when I download it in CSV format, it shows the categories of products in a single column as a report column will examine if there is no page breaks.
  
  2. I have a classic report, I can do csv export. But I want a file exported to be something like this:

  Title:
  Author:
  
  and then the table(classic report)

  How can I add some info on top in addition to the table
  
  Thank you

  Hi RN,.

  You must write a procedure to export to CSV format with the possibility to put the format of what ever you want to put.

  First thing is you need to set the header in you the procedure as shown below.

  l_file_name: = 'myreport.csv ';
  owa_util.mime_header ("application/octet ', false");
  HTP.p ('Content-Disposition: attachment; filename =' | l_file_name);
  owa_util.http_header_close;
  Close c1;

  Use htp.p to write your columns of data.

  For example

  Group your query by category

  HTP.p (' category :'||) Cursor.category_value);

  HTP.p ('product name, identification, quantity');
  HTP.p (cursor.productname | ',' |) Cursor.ID | ',' | Cursor.Quantity);

  Follow these steps in a loop of cursor, and you should get the desired format.

  at the end put "htmldb_application.g_unrecoverable_error: = true;" statement to stop the page rendering.

  Explicitly create a button and call your procedure.

  The disadvantage of this procedure is that this provision will not change dynamically if the user customizes its interactive relationship with some other grouping.

  Follow the same steps with the classic report.

  I hope this helps.

  Sukarna

• Display of UDAs in Essbase report Script

  Hello world.
  
  I am creating a report script where I show members by their UDA instead of their membername or alias.
  
  I have a large number of level 0 members who each have a tag for them to the UDA. I can query by the UDA in the report script, but it displays their membername, not the UDA in the final output.
  
  
  I need it is because I have a second Essbase cube that is to receive the data of this first. The 2nd cube has a level less than the source cube, therefore I am 'connecting' with a UDA on the members of level 0 of the source cube that corresponds to the membernames of members at level 0 of the target cube.
  
  I guess I could possibly use a linked partition?
  
  
  Thank you!

  As you found, UDAs return the Member who are associated with them. Maybe create a size of attribute, which is the same as the ADU and retireve there. IF you want to go with the approach of the partition, it would be a not replicated partition a linked partition that will transfer data of one cube to another.